Download or read book Stand Alone Battery Thermal Management System written by and published by . This book was released on 2015 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this project is research, development and demonstration of innovative thermal management concepts that reduce the cell or battery weight, complexity (component count) and/or cost by at least 20%. The project addresses two issues that are common problems with current state of the art lithium ion battery packs used in vehicles; low power at cold temperatures and reduced battery life when exposed to high temperatures. Typically, battery packs are "oversized" to satisfy the two issues mentioned above. The first phase of the project was spent making a battery pack simulation model using AMEsim software. The battery pack used as a benchmark was from the Fiat 500EV. FCA and NREL provided vehicle data and cell data that allowed an accurate model to be created that matched the electrical and thermal characteristics of the actual battery pack. The second phase involved using the battery model from the first phase and evaluate different thermal management concepts. In the end, a gas injection heat pump system was chosen as the dedicated thermal system to both heat and cool the battery pack. Based on the simulation model. The heat pump system could use 50% less energy to heat the battery pack in -20°C ambient conditions, and by keeping the battery cooler at hot climates, the battery pack size could be reduced by 5% and still meet the warranty requirements. During the final phase, the actual battery pack and heat pump system were installed in a test bench at DENSO to validate the simulation results. Also during this phase, the system was moved to NREL where testing was also done to validate the results. In conclusion, the heat pump system can improve "fuel economy" (for electric vehicle) by 12% average in cold climates. Also, the battery pack size, or capacity, could be reduced 5%, or if pack size is kept constant, the pack life could be increased by two years. Finally, the total battery pack and thermal system cost could be reduced 5% only if the system is integrated with the vehicle cabin air conditioning system. The reason why we were not able to achieve the 20% reduction target is because of the natural decay of the battery cell due to the number of cycles. Perhaps newer battery chemistries that are not so sensitive to cycling would have more potential for reducing the battery size due to thermal issues.
Download or read book Laminar Flow Forced Convection in Ducts written by R. K. Shah and published by Academic Press. This book was released on 2014-06-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.
Download or read book Thermal Management for Batteries written by Hafiz Muhammad Ali and published by Elsevier. This book was released on 2024-03-15 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Management of Batteries presents a comprehensive examination of the various conventional and emerging technologies used for thermal management of batteries and electronics. With an emphasis on advanced nanofluids, the book provides step-by-step guidance on advanced techniques at the component and system level for both active and passive technologyStarting with an overview of the fundamentals, each chapter quickly builds into a comprehensive treatment of up-to-date technologies. The first part of the book discusses advanced battery technologies, while the second part addresses the design and performance optimization of battery thermal management systems. Power density and fast charging mechanisms of batteries are considered, as are role of thermal management systems on performance enhancement. The book discusses the design selection of various thermal management systems, parameters selection for different configurations, the operating conditions for different battery types, the setups used for experimentation and instrumentation, and the operation of thermal management systems. Advanced techniques such as heat pipes, phase change materials, nanofluids, novel heat sinks, and two phase flow loops are examined in detail.Presenting the fundamentals through to the latest developments alongside step-by-step guidance, mathematical models, schematic diagrams, and experimental data, Thermal Management of Batteries is an invaluable and comprehensive reference for graduates, researchers, and practicing engineers working in the field of battery thermal management, and offers valuable solutions to key thermal management problems that will be of interest to anyone working on energy and thermal heat systems. - Critically examines the components of batteries systems and their thermal energy generation - Analyzes system scale integration of battery components with optimization and better design impact - Explores the modeling aspects and applications of nanofluid technology and PCMs, as well as the utilization of machine learning techniques - Provides step-by-step guidance on techniques in each chapter that are supported by mathematical models, schematic diagrams, and experimental data
Download or read book Thermal Management of Electric Vehicle Battery Systems written by Ibrahim Din¿er and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Management of Electric Vehicle Battery Systems provides a thorough examination of various conventional and cutting edge electric vehicle (EV) battery thermal management systems (including phase change material) that are currently used in the industry as well as being proposed for future EV batteries. It covers how to select the right thermal management design, configuration and parameters for the users’ battery chemistry, applications and operating conditions, and provides guidance on the setup, instrumentation and operation of their thermal management systems (TMS) in the most efficient and effective manner. This book provides the reader with the necessary information to develop a capable battery TMS that can keep the cells operating within the ideal operating temperature ranges and uniformities, while minimizing the associated energy consumption, cost and environmental impact. The procedures used are explained step-by-step, and generic and widely used parameters are utilized as much as possible to enable the reader to incorporate the conducted analyses to the systems they are working on. Also included are comprehensive thermodynamic modelling and analyses of TMSs as well as databanks of component costs and environmental impacts, which can be useful for providing new ideas on improving vehicle designs. Key features: Discusses traditional and cutting edge technologies as well as research directions Covers thermal management systems and their selection for different vehicles and applications Includes case studies and practical examples from the industry Covers thermodynamic analyses and assessment methods, including those based on energy and exergy, as well as exergoeconomic, exergoenvironmental and enviroeconomic techniques Accompanied by a website hosting codes, models, and economic and environmental databases as well as various related information Thermal Management of Electric Vehicle Battery Systems is a unique book on electric vehicle thermal management systems for researchers and practitioners in industry, and is also a suitable textbook for senior-level undergraduate and graduate courses.
Download or read book Modeling and Simulation of Lithium ion Power Battery Thermal Management written by Junqiu Li and published by Springer Nature. This book was released on 2022-05-09 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the thermal management technology of lithium-ion batteries for vehicles. It introduces the charging and discharging temperature characteristics of lithium-ion batteries for vehicles, the method for modeling heat generation of lithium-ion batteries, experimental research and simulation on air-cooled and liquid-cooled heat dissipation of lithium-ion batteries, lithium-ion battery heating method based on PTC and wide-line metal film, self-heating using sinusoidal alternating current. This book is mainly for practitioners in the new energy vehicle industry, and it is suitable for reading and reference by researchers and engineering technicians in related fields such as new energy vehicles, thermal management and batteries. It can also be used as a reference book for undergraduates and graduate students in energy and power, electric vehicles, batteries and other related majors.
Download or read book Handbook on Battery Energy Storage System written by Asian Development Bank and published by Asian Development Bank. This book was released on 2018-12-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook serves as a guide to deploying battery energy storage technologies, specifically for distributed energy resources and flexibility resources. Battery energy storage technology is the most promising, rapidly developed technology as it provides higher efficiency and ease of control. With energy transition through decarbonization and decentralization, energy storage plays a significant role to enhance grid efficiency by alleviating volatility from demand and supply. Energy storage also contributes to the grid integration of renewable energy and promotion of microgrid.
Download or read book Handbook of Thermal Management Systems written by Fethi Aloui and published by Elsevier. This book was released on 2023-08-24 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Management Systems: e-Mobility and Other Energy Applications is a comprehensive reference on the thermal management of key renewable energy sources and other electronic components. With an emphasis on practical applications, the book addresses thermal management systems of batteries, fuel cells, solar panels, electric motors, as well as a range of other electronic devices that are crucial for the development of sustainable transport systems. Chapters provide a basic understanding of the thermodynamics behind the development of a thermal management system, update on Batteries, Fuel Cells, Solar Panels, and Other Electronics, provide a detailed description of components, and discuss fundamentals. Dedicated chapters then systematically examine the heating, cooling, and phase changes of each system, supported by numerical analyses, simulations and experimental data. These chapters include discussion of the latest technologies and methods and practical guidance on their application in real-world system-level projects, as well as case studies from engineering systems that are currently in operation. Finally, next-generation technologies and methods are discussed and considered. Presents a comprehensive overview of thermal management systems for modern electronic technologies related to energy production, storage and sustainable transportation Addresses the main bottlenecks in the technology development for future green and sustainable transportation systems Focuses on the practical aspects and implementation of thermal management systems through industrial case studies, real-world examples, and solutions to key problems
Download or read book Encyclopedia of Electrochemical Power Sources written by Jürgen Garche and published by Newnes. This book was released on 2013-05-20 with total page 4532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Electrochemical Power Sources is a truly interdisciplinary reference for those working with batteries, fuel cells, electrolyzers, supercapacitors, and photo-electrochemical cells. With a focus on the environmental and economic impact of electrochemical power sources, this five-volume work consolidates coverage of the field and serves as an entry point to the literature for professionals and students alike. Covers the main types of power sources, including their operating principles, systems, materials, and applications Serves as a primary source of information for electrochemists, materials scientists, energy technologists, and engineers Incorporates nearly 350 articles, with timely coverage of such topics as environmental and sustainability considerations
Download or read book Battery Management System for Future Electric Vehicles written by Dirk Söffker and published by MDPI. This book was released on 2020-11-09 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The future of electric vehicles relies nearly entirely on the design, monitoring, and control of the vehicle battery and its associated systems. Along with an initial optimal design of the cell/pack-level structure, the runtime performance of the battery needs to be continuously monitored and optimized for a safe and reliable operation and prolonged life. Improved charging techniques need to be developed to protect and preserve the battery. The scope of this Special Issue is to address all the above issues by promoting innovative design concepts, modeling and state estimation techniques, charging/discharging management, and hybridization with other storage components.
Download or read book Battery Thermal Management System Design Modeling written by and published by . This book was released on 2006 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looks at the impact of cooling strategies with air and both direct and indirect liquid cooling for battery thermal management.
Download or read book Intelligent Thermal Energy Systems written by Cheng Siong Chin and published by . This book was released on 2020-02-04 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book covers an overview and applications of the thermal storage systems used in batteries for the electric automotive industry such as in electric vehicles, thermal storage system in smart grid systems, thermal harvesting for battery-less use for wireless sensor networks, thermo-electric generators and biomedical sensing. The thermal storage system can be used to harvest energy for implementation of battery-less, zero-maintenance and place-and-forget electronic systems. This book has been prepared for the needs of those who seek an application on developing the thermal system. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with thermal system design. The book can be used as reference book for undergraduate and postgraduate students in the area of thermal system overview, design and applications. Lithium iron phosphate (LiFePO4) batteries have gained significant traction in the electric automotive industry in the recent years mainly due to their high safety performance, flat voltage profile and low cost. Although LiFePO4 batteries have excellent thermal stability, they still suffer from thermal runaway like other lithium-ion type cells. Thermal volatility is a major drawback in the lithium-ion and sufficient knowledge of the thermal distribution and heat generation of the LiFePO4 battery is necessary to avoid catastrophic thermal failure. The first chapter details the thermal analysis of a LiFePO4 battery cell with a latent heat thermal cooling wrap. The model has been developed as a tool to study the cooling effects of the wrap on the battery cell during discharging. The proposed latent heat storage based battery cooling wrap is used to passively manage the heat produced by the cell and absorbing and maintaining the battery temperature within operational temperatures and below thermal runaway temperature. Thermal energy storage (TES) is another important concept of the smart grid systems. For non-renewable, the benefit of TES systems is the improvement of the generation performance by supporting the energy demand during peak hours. Also, TES is often able to improve the system efficiency in a way that is more energy and cost effective. The best-known method for thermal energy storage is by utilizing the latent heat of fusion of energy storage material known as phase change materials (PCM). TES systems are classified into two main categories such as sensible and latent heat storage. An overview of the research on performance improvement are also delineated. Hence, the thermal energy harvesting has indeed gained attention in the last decade due to its promising possibilities in area such as wireless sensor networks (WSN) for wide range of IoT (Internet of Things) applications. Thermal energy scavenging from waste heat can enable implementation of battery-less, zero-maintenance and place-and-forget electronic systems. Scavenging energy from the temperature difference between human body heat and ambiance is an attractive solution for powering wearables for continuous health monitoring, biomedical sensing and body area sensor networks (BASN). The low energy efficiency and low voltage output of the thermo-electric generators (TEG) pose challenges to the deployment of industry ready powering systems"--
Download or read book Battery Management Systems written by H.J. Bergveld and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery Management Systems - Design by Modelling describes the design of Battery Management Systems (BMS) with the aid of simulation methods. The basic tasks of BMS are to ensure optimum use of the energy stored in the battery (pack) that powers a portable device and to prevent damage inflicted on the battery (pack). This becomes increasingly important due to the larger power consumption associated with added features to portable devices on the one hand and the demand for longer run times on the other hand. In addition to explaining the general principles of BMS tasks such as charging algorithms and State-of-Charge (SoC) indication methods, the book also covers real-life examples of BMS functionality of practical portable devices such as shavers and cellular phones. Simulations offer the advantage over measurements that less time is needed to gain knowledge of a battery's behaviour in interaction with other parts in a portable device under a wide variety of conditions. This knowledge can be used to improve the design of a BMS, even before a prototype of the portable device has been built. The battery is the central part of a BMS and good simulation models that can be used to improve the BMS design were previously unavailable. Therefore, a large part of the book is devoted to the construction of simulation models for rechargeable batteries. With the aid of several illustrations it is shown that design improvements can indeed be realized with the presented battery models. Examples include an improved charging algorithm that was elaborated in simulations and verified in practice and a new SoC indication system that was developed showing promising results. The contents of Battery Management Systems - Design by Modelling is based on years of research performed at the Philips Research Laboratories. The combination of basic and detailed descriptions of battery behaviour both in chemical and electrical terms makes this book truly multidisciplinary. It can therefore be read both by people with an (electro)chemical and an electrical engineering background.
Download or read book Vehicle Thermal Management Systems VTMS 6 written by IMechE (Institution of Mechanical Engineers) and published by Wiley. This book was released on 2005-06-24 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Thermal Management Systems - VTMS 6 brings together papers from world-renowned experts in their field, creating a volume of up-to-the-minute research and developments. VTMS 6 makes vital reading for all automotive engineers and designers who wish to investigate the most innovative and effective ways of improving passenger thermal comfort while reducing fuel consumption. Also included is a CD-ROM containing all the papers that were presented at the conference. The CD-ROM has been created using Adobe Acrobat Reader 5.0 with Search. Acrobat Reader is a unique software application that allows the user the opportunity to view, search, download, and print information electronically generated and produced in PDF format. It has extensive search facilities by author, subject, key-words, etc. Topics covered include: Heat and A/C heat and A/C Vehicle Comfort Heat Exchanger/Manufacture Emissions Alternate Power Trains Total Systems Cooling Systems Engines Underhood Heat Exchangers
Download or read book The Handbook of Lithium Ion Battery Pack Design written by John T. Warner and published by Elsevier. This book was released on 2024-05-14 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Lithium-Ion Battery Pack Design: Chemistry, Components, Types and Terminology,?Second Edition provides a clear and concise explanation of EV and Li-ion batteries for readers that are new to the field. The second edition expands and updates all topics covered in the original book, adding more details to all existing chapters and including major updates to align with all of the rapid changes the industry has experienced over the past few years. This handbook offers a layman's explanation of the history of vehicle electrification and battery technology, describing the various terminology and acronyms and explaining how to do simple calculations that can be used in determining basic battery sizing, capacity, voltage, and energy. By the end of this book the reader will have a solid understanding of the terminology around Li-ion batteries and be able to undertake simple battery calculations. The book is immensely useful to beginning and experienced engineers alike who are moving into the battery field. Li-ion batteries are one of the most unique systems in automobiles today in that they combine multiple engineering disciplines, yet most engineering programs focus on only a single engineering field. This book provides the reader with a reference to the history, terminology and design criteria needed to understand the Li-ion battery and to successfully lay out a new battery concept. Whether you are an electrical engineer, a mechanical engineer or a chemist, this book will help you better appreciate the inter-relationships between the various battery engineering fields that are required to understand the battery as an Energy Storage System. It gives great insights for readers ranging from engineers to sales, marketing, management, leadership, investors, and government officials. - Adds a brief history of battery technology and its evolution to current technologies? - Expands and updates the chemistry to include the latest types - Discusses thermal runaway and cascading failure mitigation technologies? - Expands and updates the descriptions of the battery module and pack components and systems?? - Adds description of the manufacturing processes for cells, modules, and packs? - Introduces and discusses new topics such as battery-as-a-service, cell to pack and cell to chassis designs, and wireless BMS?
Download or read book Battery Technology written by Marc A Rosen and published by Elsevier. This book was released on 2023-01-23 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery Technology: From Fundamentals to Thermal Behavior and Management provides comprehensive coverage of rechargeable battery technology fundamentals, along with relevant aging mechanisms and thermal management systems. With a strong focus on the analysis and modeling of battery technologies, the book includes coverage of overpotentials in battery cells and discussions on the thermal-electrochemical coupled modeling of batteries. Beginning with an introduction to battery technology, the book then takes a deep dive into thermodynamics of batteries and electrochemical modeling of batteries. Subsequent chapters examine battery thermal behavior and thermal systems, before discussing integrated battery-based systems. Accompanied by chapter objectives, applications, case studies and study questions to test knowledge, this book is an essential resource for students and researchers wanting to understand the underlying basics of batteries, along with the latest advances in battery technology. - Provides a comprehensive resource on the fundamentals of battery technologies and their thermal management systems - Follows a coherent approach, starting from fundamentals and basics and culminating with advanced systems and applications - Highlights case studies and real-world examples throughout to bridge the gap between knowledge and practical applications
Download or read book Lithium Ion Batteries Basics and Applications written by Reiner Korthauer and published by Springer. This book was released on 2018-08-07 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook focuses on a complete outline of lithium-ion batteries. Just before starting with an exposition of the fundamentals of this system, the book gives a short explanation of the newest cell generation. The most important elements are described as negative / positive electrode materials, electrolytes, seals and separators. The battery disconnect unit and the battery management system are important parts of modern lithium-ion batteries. An economical, faultless and efficient battery production is a must today and is represented with one chapter in the handbook. Cross-cutting issues like electrical, chemical, functional safety are further topics. Last but not least standards and transportation themes are the final chapters of the handbook. The different topics of the handbook provide a good knowledge base not only for those working daily on electrochemical energy storage, but also to scientists, engineers and students concerned in modern battery systems.
Download or read book Battery Thermal Management System Design Modeling Presentation written by and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the objectives and motivations for a battery thermal management vehicle system design study.
