Download or read book Stainless Steels and Alloys written by Zoia Duriagina and published by BoD – Books on Demand. This book was released on 2019-02-13 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials science is the magic that allows us to change the chemical composition and microstructure of material to regulate its corrosion-mechanical, technological, and functional properties. Five major classes of stainless steels are widely used: ferritic, austenitic, martensitic, duplex, and precipitation hardening. Austenitic stainless steels are extensively used for service down to as low as the temperature of liquid helium (-269oC). This is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing. Steels with ferritic or martensitic structures show a sudden change from ductile (safe) to brittle (unsafe) fracture over a small temperature difference. Even the best of these steels shows this behavior at temperatures higher than -100oC and in many cases only just below zero. Various types of stainless steel are used across the whole temperature range from ambient to 1100oC. This book will be useful to scientists, engineers, masters, graduate students, and students. I hope readers will enjoy this book and that it will serve to create new materials with unique properties.

Download or read book The Alloy Tree written by C Farrar and published by Elsevier. This book was released on 2004-07-15 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are certain key alloys, stainless steels, nickel alloys and low alloy steels that are of paramount importance to the power generation, petrochemical and oil and gas industries. In one fully comprehensive guide, The alloy tree addresses the significance of such alloys and their role in these fundamental industries.The book begins with a short introduction and a master flow diagram, the "alloy tree, which shows the interrelationship between the main alloy groups. This is followed by ten chapters, each describing how stainless steels, nickel alloys and some low alloy steels have evolved from plain carbon steel. Adopting a narrative style, each chapter explains the background, development, key properties and applications of the alloy type. Abbreviations, specifications, product forms, alloying costs and types of corrosion are covered in the extensive appendices and a full bibliography and sources of further information conclude the book.The alloy tree is an important reference for Metallurgists and Materials Engineers and for those mechanical and chemical engineers who have an interest in the alloys used in their industries. - Illustrates the inter-relationship between the main alloy groups - Traces the evolution and development of key alloys - Comprehensive guide that looks at stainless steels, nickel alloys and low alloy steels and their role in the power generation, petrochemical and oil and gas industries

Download or read book The History of Stainless Steel written by Harold M. Cobb and published by ASM International. This book was released on 2010-01-01 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The History of Stainless Steel provides a fascinating glimpse into a vital material that we may take for granted today. Stainless steel, called "the miracle metal" and "the crowning achievement of metallurgy" by the prominent metallurgist Carl Zapffe, is a material marvel with an equally fascinating history of people, places, and technology. As stainless steel nears the hundredth anniversary of its discovery, The History of Stainless Steel by Harold Cobb is a fitting perspective on a vital material of our modern life. Aptly called the miracle metal by the renowned metallurgist Carl Zapffe, stainless steel is not only a metallurgical marvel, but its history provides an equally fascinating story of curiosity, competitive persistence, and entrepreneurial spirit. The History of Stainless Steel is the world's first book that captures the unfolding excitement and innovations of stainless steel pioneers and entrepreneurs. Many new insights are given into the work of famous pioneers like Harry Brearley, Elwood Haynes, and Benno Strauss, including significant technical contributions of lesser known figures like William Krivsky. This fascinating history of stainless steel exemplifies the great push of progress in the 20th Century. From the stainless steel cutlery of Brearley in 1913, stainless steel burst on the modern scene in many tangible ways. Excerpted text by William Van Alen, architect of the Chrysler Building, describes the early architectural use of stainless steel. Another historic application of stainless steel is the revolution in rail travel by the Edward G. Budd Company, which built the first light-weight stainless steel passenger trains--with an astounding 90% reduction in fuel costs. This remains recognized today as one of the technological marvels of the modern world. Harold Cobb, a metallurgist who has spent much of his career in the stainless steel industry, uncovers many interesting stories and insights, including a special perspective on the prominent role of stainless steel in the activities of emerging technical societies such as the American Society for Metals and the American Society for Testing and Materials. Amply illustrated and with a 78-page timeline, this publication truly evokes the inspirations created by and from stainless steel.

Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Stainless Steels written by Jonathan Beddoes and published by ASM International(OH). This book was released on 1999 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a basic and introductory reference, this book not only addresses stainless steels in the light of their resistance to corrosion for which they are more commonly recognised, but also explains the wide range of other useful properties attributable to the various and specific categories of these alloys. This book is a concise, easy-to-read introduction to one of the most widely used industrial materials. Each chapter explains an important concept related to the selection, application, processing and use of stainless steels. This book is indexed and includes appendices: (1) Identification of Stainless Steels in Service (2) Toxicity of Stainless Steel (3) Table of Equivalent Designations (this is not intended to be complete, but includes the more commonly used stainless steels and the most widely used designation systems). First published in 1965 and updated in 1986, this third edition is a completely new text.

Download or read book Stainless Steels for Design Engineers written by Michael F. McGuire and published by ASM International. This book was released on 2008 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rate of growth of stainless steel has outpaced that of other metals and alloys, and by 2010 may surpass aluminum as the second most widely used metal after carbon steel. The 2007 world production of stainless steel was approximately 30,000,000 tons and has nearly doubled in the last ten years. This growth is occurring at the same time that the production of stainless steel continues to become more consolidated. One result of this is a more widespread need to understand stainless steel with fewer resources to provide that information. The concurrent technical evolution in stainless steel and increasing volatility of raw material prices has made it more important for the engineers and designers who use stainless steel to make sound technical judgments about which stainless steels to use and how to use them.

Download or read book Duplex Stainless Steels written by Iris Alvarez-Armas and published by John Wiley & Sons. This book was released on 2013-01-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Duplex Stainless Steels (DSSs) are chromium-nickel-molybdenum-iron alloys that are usually in proportions optimized for equalizing the volume fractions of austenite and ferrite. Due to their ferritic-austenitic microstructure, they possess a higher mechanical strength and a better corrosion resistance than standard austenitic steels. This type of steel is now increasing its application and market field due to its very good properties and relatively low cost. This book is a review of the most recent progress achieved in the last 10 years on microstructure, corrosion resistance and mechanical strength properties, as well as applications, due to the development of new grades. Special attention will be given to fatigue and fracture behavior and to proposed models to account for mechanical behavior. Each subject will be developed in chapters written by experts recognized around the international industrial and scientific communities. The use of duplex stainless steels has grown rapidly in the last 10 years, particularly in the oil and gas industry, chemical tankers, pulp and paper as well as the chemical industry. In all these examples, topics like welding, corrosion resistance and mechanical strength properties (mainly in the fatigue domain) are crucial. Therefore, the update of welding and corrosion properties and the introduction of topics like texture effects, fatigue and fracture strength properties, and mechanical behavior modeling give this book specific focus and character.

Download or read book Austenitic Stainless Steels written by Wojciech Borek and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steel is still one of the fastest growing materials. Today, the austenitic stainless steel with the classic composition of 18% Cr and 8% Ni (grade 304L) is still the most widely used by far in the world. The unique characteristic of stainless steel arises from three main factors. The versatility results from high corrosion resistance, excellent low- and high-temperature properties, high toughness, formability, and weldability. The long life of stainless steels has been proven in service in a wide range of environments, together with low maintenance costs compared to other highly alloyed metallic materials. The retained value of stainless steel results from the high intrinsic value and easy recycling. Stainless steel, especially of austenitic microstructure, plays a crucial role in achieving sustainable development nowadays, so it is also important for further generations.

Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Resistance of Stainless Steels written by C.P. Dillon and published by CRC Press. This book was released on 1995-05-04 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work examines the corrosion of stainless steels and similar chromium-bearing nickel-containing higher alloys, detailing various corrosive environments, including atmospheric and fire-side corrosion, corrosion by water and soil, and corrosion caused by particular industrial processes. It presents the acceptable isocorosion parameters of concentration and temperature for over 250 chemicals for which stainless alloys are the preferred materials of construction.

Download or read book Iron and Steel written by William F. Hosford and published by Cambridge University Press. This book was released on 2012-04-23 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended both as a resource for engineers and as an introduction to the layman about our most important metal system. After an introduction that deals with the history and refining of iron and steel, the rest of the book examines their physical properties and metallurgy. To elaborate on the importance of iron and steel, we can refer to the fact that modern civilization as we know it would not be possible without it. Steel is essential in the machinery necessary for manufacturing that meets our needs. Even the words themselves have come to suggest strength. Phrases such as 'iron willed', 'iron fisted', 'iron clad', 'iron curtain' and 'pumping iron' imply strength. A 'steely glance' is a stern look. 'A heart of steel' refers to a very hard demeanor. The Russian dictator, Stalin (which means steel in Russian), chose the name to invoke fear in those under him.

Download or read book Welding Metallurgy of Stainless Steels written by Erich Folkhard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: When considering the operational performance of stainless steel weldments the most important points to consider are corrosion resistance, weld metal mechanical properties and the integrity ofthe weldedjoint. Mechanical and corrosion resistance properties are greatly influenced by the metallurgical processes that occur during welding or during heat treatment of welded components. This book is aimed, there fore, at providing information on the metallurgical problems that may be encountered during stainless steel welding. In this way we aim to help overcome a certain degree of insecurity that is often encountered in welding shops engaged in the welding of stainless steels and is often the cause of welding problems which may in some instances lead to the premature failure of the welded component. The metallurgical processes that occur during the welding of stainless steel are of a highly intricate nature. The present book focuses in particular on the signif icance of constitution diagrams, on the processes occurring during the solidification of weld metal and on the recrystallization and precipitation phenomena which take place in the area of the welds. There are specific chapters covering the hot cracking resistance during welding and the practical welding of a number of different stainless steel grades. In addition, recommendations are given as to the most suitable procedures to be followed in order to obtain maximum corrosion resistance and mechanical properties from the weldments.

Download or read book Developments in Corrosion Protection written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2014-02-20 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the first thing that comes to your mind after hearing the term “corrosion” is corrosion of a metal. Corrosion is a basically harmful phenomenon, but it can be useful in some cases. For instance, environment’s pollution with corrosion products and damage to the performance of a system are among its harmful effects, whereas electric energy generation in a battery and cathodic protection of many structures are among its advantages. However, these advantages are almost nothing as compared to the costs and effects imposed by its detrimental influences. The enormous costs of this phenomenon can be better understand through studying the published statistics on direct and indirect corrosion damages on economy of governments. The direct cost of corrosion is near 3 % of the gross domestic product (GDP) of USA. Considering this huge cost, it is necessary to develop and expand the corrosion science and its protection technologies.

Download or read book Corrosion of Austenitic Stainless Steels written by H S Khatak and published by Woodhead Publishing. This book was released on 2002-10-14 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study covers all types of corrosion of austenitic stainless steel. It also covers methods for detecting corrosion and investigating corrosion-related failure, together with guidelines for improving corrosion protection of steels. Details all types of corrosion of austenitic stainless steel Covers methods for detecting corrosion and investigating corrosion-related failure Outlines guidelines for improving corrosion protection of steels

Download or read book Recent Trends in Processing and Degradation of Aluminium Alloys written by Zaki Ahmad and published by IntechOpen. This book was released on 2011-11-21 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent decade a quantum leap has been made in production of aluminum alloys and new techniques of casting, forming, welding and surface modification have been evolved to improve the structural integrity of aluminum alloys. This book covers the essential need for the industrial and academic communities for update information. It would also be useful for entrepreneurs technocrats and all those interested in the production and the application of aluminum alloys and strategic structures. It would also help the instructors at senior and graduate level to support their text.

Download or read book Light Metal Alloys Applications written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2014-06-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight alloys have become of great importance in engineering for construction of transportation equipment. At present, the metals that serve as the base of the principal light alloys are aluminum and magnesium. One of the most important lightweight alloys are the aluminum alloys in use for several applications (structural components wrought aluminum alloys, parts and plates). However, some casting parts that have low cost of production play important role in aircraft parts. Magnesium and its alloys are among the lightest of all metals and the sixth most abundant metal on earth. Magnesium is ductile and the most machinable of all metals. Many of these light weight alloys have appropriately high strength to warrant their use for structural purposes, and as a result of their use, the total weight of transportation equipment has been considerably decreased.

Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]