Download or read book Stabilization of Polymeric Materials written by Hans Zweifel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics are used worldwide in everyday life, e.g. as food packaging, electronics, construction, automotive parts, and household appliances. To produce these products with the desired service lifetimes the use of suitable stabilizers is necessary. This book provides a concise and comprehensive overview of the basic mechanisms of plastic degradation processes caused by heat and light. At its core is a detailed description of the stabilization of different polymers, including an explanation of stabilization mechanisms and the influence of commonly used additives such as fillers, flame retardents and pigments on the stability of plastic. Every polymer scientist, material technologist, or application engineer dealing with the design of the properties of plastics will benefit from this new overview.
Download or read book Polymer Degradation and Stabilization written by W. L. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of polymers as an important class of material was inhibited at the first by the premature failure of these versatile compounds in many applications. The deterioration of important properties of both natural and synthetic polymers is the result of irreversible changes in composition and structure of polymers molecules. As a result of these reactions, mechanical, electrical and/or aesthetic properties are degraded beyond acceptable limits. It is now generally recognized that stabilization against degradation is necessary if the useful life of polymers is to be extended sufficiently to meet design requirements for long-term applications. Polymers degrade by a wide variety of mechanisms, several of which affect all polymers through to varying degree. This monograph will concentrate on those degradation mechanisms which result from reactions of polymers with oxygen in its various forms and which are accelerated by heat and/or radiation. Those stabilization mechanisms are discussed which are based on an understanding of degradation reaction mechanisms that are reasonably well established. The stabilization of polymers is still undergoing a transition from an art to a science as mechanisms of degradation become more fully developed. A scientific approach to stabilization can only be approached when there is an understanding of the reactions that lead to degradation. Stabilization against biodegradation and burning will not be discussed since there is not a clear understanding of how polymers degrade under these conditions.
Download or read book Fundamentals of Polymer Degradation and Stabilization written by N.S. Allen and published by Springer Science & Business Media. This book was released on 1992-10-31 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade, the field of polymer degradation and stabilization has become a subject of central importance in polymer science and technology. This book provides a fundamental source of information designed for those with only a basic understanding of the background of the field.
Download or read book Aging and Stabilization of Polymers written by M. B. Neiman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for a broad development of the production of polymer ma terials has become evident. All these materials are subject to various types of aging (destruction); hence, stabilizers which permit the stor age, reprocessing, and use of polymer materials without any appreci able change in their properties must be introduced into them. In recent years, this problem of stabilizing polymers has attracted the attention of many scientists and technologists, both in the USSR and abroad. The scientific basis of the foreign studies will be found in a number of theo retical premises, but chiefly the theory of chain reactions with un branched chains. In the Soviet Union, the concepts of Academician N. N. Semenov on chain reactions with degenerate branches have become the starting point of theoretical studies of the stabilization and destruction of polymers. Soviet scientists have developed a theory of critical concentrations of antioxidants and have shown that the processes of stabilization have a very complex chemical character. The nature of the polymers them selves greatly affects these processes and consequently, different stabil izers are required for polymers of different structures. In addition, it has been shown that the antioxidants used thus far can not only cause chain termination, but can also initiate oxidation and give rise to de generate branches.
Download or read book Polymer Degradation and Stabilisation written by Norman Grassie and published by CUP Archive. This book was released on 1988-04-14 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of polymer degradation and stabilisation is of considerable practical importance as the industrial uses of polymeric materials continue to expand. In this book, the authors lucidly relate technological phenomena to the chemistry and physics of degradation and stabilisation processes. Degradation embraces a variety of technologically important phenomena ranging from relatively low temperature processes such as 'weathering' of plastics, 'fatigue' of rubbers through the processing of polymers in shearing mixers to very high temperature processes such as flammability and ablation. All these technological phenomena have in common certain basic chemical reactions. Thus 'weathering' has its roots in photo-oxidation, 'fatigue' and melt-degradation in mechano-oxidation and flammability, and ablation in ablation in pyrolysis and vapour phase oxidation.
Download or read book Mechanisms of Polymer Degradation and Stabilisation written by G. Scott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this publication is two-fold. In the first place it is intended to review progress in the development of practical stabilising systems for a wide range of polymers and applications. A complemen tary and ultimately more important objective is to accommodate these practical developments within the framework of antioxidant theory, since there can be little question that further major advances in the practice of stabilisation technology will only be possible on a firm mechanistic foundation. With the continual increase in the number of commercial anti oxidants and stabilisers, often functioning by mechanisms not even considered ten years ago, there is a need for a general theory which will allow the potential user to predict the performance of a particular antioxidant structure under specific practical conditions. Any such predictive tool must involve a simplified kinetic approach to inhibited oxidation and, in Chapter 1, Denisov outlines a possible mechanistic approach with the potential to predict the most useful antioxidant to use and the limits of its usefulness. In Chapter 2, Schwetlick reviews the current state of knowledge on the antioxidant mechanisms of the phosphite esters with particular emphasis on their catalytic peroxidolytic activity. Dithiophosphate v vi PREFACE derivatives show a similar behaviour but for quite different reasons and, in Chapter 3, AI-Malaika reviews information available from analytical studies, particularly using 31p_NMR spectroscopy, to elucid ate the complex chemistry that leads to the formation of the antioxidant -active agents.
Download or read book Developments in Polymer Stabilisation written by Gerald Scott and published by Elsevier Science & Technology. This book was released on 1981 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Additives written by Jiri E. Kresta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.
Download or read book Thermal Degradation of Polymeric Materials written by Krzysztof Pielichowski and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the thermal degradation of polymers is of paramount importance for developing a rational technology of polymer processing and higher-temperature applications. Controlling degradation requires understanding of many different phenomena, including chemical mechanisms, the influence of polymer morphology, the complexities of oxidation chemistry, and the effects of stabilisers, fillers and other additives. This book offers a wealth of information for polymer researchers and processors requiring an understanding of the implications of thermal degradation on material and product performance.
Download or read book Polymer Photodegradation written by J.F. Rabek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, the production of polymers and plastics has been increasing rapidly. In spite of developing new polymers and polymeric materials, only 40~60 are used commercially on a large scale. It has been estimated that half of the annual production of polymers is employed outdoors. The photochemical instability of most polymers limits their outdoor application as they are photodegraded quickly over periods from months to a few years. To the despair of technologists and consumers alike, photodegradation and environmental ageing of polymers occur much faster than can be expected from knowledge collected in laboratories. In order to improve polymer photostability there has been a very big effort during the last 30 years to understand the mechanisms involved in photodegradation and environmental ageing. This book represents the author's attempt, based on his 25 years' experience in research on photodegradation and photo stabilization, to collect and generalize a number of available data on the photodegradation of polymers. The space limitation and the tremendous number of publications in the past two decades have made a detailed presentation of all important results and data difficult. The author apologizes to those whose work has not been quoted or widely presented in this book. Because many published results are very often contradictory, it has been difficult to present a fully critical review of collected knowledge, without antagonizing authors. For that reason, all available theories, mechanisms and different suggestions have been presented together, and only practice can evaluate which of them are valid.
Download or read book Resistance and Stability of Polymers written by Gottfried Wilhelm Ehrenstein and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2013-10-01 with total page 1462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stability and resistance of polymeric materials determine whether they can be utilized in a given application. Authoritative and reliable material information is needed during the material selection process and this information must consider the influences of material manufacturing, compounding and stabilization, processing, part design, use and subsequent disposal/recycling. This book is based on the review of more than 1200 literature sources and represents a comprehensive overview of the current know-how regarding the stability and resistance of thermoplastics, thermosets, elastomers as well as the most commonly used reinforcements and additives. Extensive tables document material resistance to given media, facilitating appropriate material selection or stabilization for a given application. Contents Volume 1: Principles of Aging Testing Methods Stabilization Influence of Processing and Use Resistance to Thermal and Thermal-Oxidative Loads, Weathering, Chemicals, Ionizing Radiation, Microorganisms, Biological Influences, and Mechanical Loads Creep and Fatigue of Reinforced Polymers Contents Volume 2: Chemical Resistance Tables White Lists of Media Influence (According to DIBt) References Index
Download or read book Plastics Additives Handbook written by Hans Zweifel and published by Hanser Gardner Publications. This book was released on 2009 with total page 1222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics without additives are not viable. Additives are essential to make plastics processable and to assure their end-use properties. The demands on additives have continued to evolve, not only because of changes in processing conditions and production techniques but also because plastics are being used in more demanding applications. This revised and updated edition, described earlier by one reviewer as the "bible" for anyone involved in the chemistry and technology of plastics additives, again provides an excellent overview of the complex science and technology of plastics additives and their industry. It offers guidance for all professionals involved in the development of new thermoplastic resin grades and novel end-use applications.
Download or read book Polymer Durability written by Roger Lee Clough and published by . This book was released on 1996 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive overview of the science of polymer durability. Discusses the molecular mechanisms of polymer aging and deterioration, emphasizing UV and thermal exposure environments. Describes a variety of analytical techniques for studying degradation, with special emphasis on chemiluminescence. Covers advances in the use of additives and other approaches for enhancing polymer stability. Reviews mechanisms and applications of major classes of stabilizers, and discusses the problem of stabilizer migration and loss. Examines new methods for predicting the aging rate and lifetime of a material.
Download or read book Photostabilization of Polymers written by J.F. Rabek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, the production of polymers and plastics has been increasing rapidly. In spite of developing new polymers and polymeric materials, only 40-60 are used commercially on a large scale. It has been estimated that half of the annual production of polymers is employed outdoors. Increasing the stability of polymers and plastics towards heat, light, atmospheric oxygen and other environmental agents and weathering conditions has always been a very important problem. The photochemical instability of most of polymers limits them to outdoor application, where they are photo degraded fast over periods ranging from months to a few years. To the despair of technologists and consumers alike, photodegrada tion and environmental ageing of polymers occur much faster than can be expected from knowledge collected in laboratories. In many cases, improved methods of preparation and purification of both monomers and polymers yield products of better quality and higher resistance to heat and light. However, without stabilization of polymers by applica tion of antioxidants (to decrease thermal oxidative degradation) and photostabilizers (to decrease photo-oxidative degradation) it would be impossible to employ polymers and plastics in everyday use.
Download or read book Polymeric Surfactants written by Tharwat F. Tadros and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-05-08 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Surfactants covers the structure and stability origins of these highly useful surfactants. Adsorption and solution properties in emulsions are discussed based on their underlying thermodynamics and kinetics. Research scientists and Ph.D. students investigating chemistry, chemical engineering and colloidal science will benefit from this text on polymeric surfactants and their value in preparation and stabilization of disperse systems.
Download or read book Single Chain Polymer Nanoparticles written by José A. Pomposo and published by John Wiley & Sons. This book was released on 2017-08-18 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on this important and emerging topic presents an overview of the very latest results obtained in single-chain polymer nanoparticles obtained by folding synthetic single polymer chains, painting a complete picture from synthesis via characterization to everyday applications. The initial chapters describe the synthetics methods as well as the molecular simulation of these nanoparticles, while subsequent chapters discuss the analytical techniques that are applied to characterize them, including size and structural characterization as well as scattering techniques. The final chapters are then devoted to the practical applications in nanomedicine, sensing, catalysis and several other uses, concluding with a look at the future for such nanoparticles. Essential reading for polymer and materials scientists, materials engineers, biochemists as well as environmental chemists.
Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
