Download or read book Stability of Free Surfaces in Single Phase and Two Phase Open Capillary Channel Flow in a Microgravity Environment written by Peter Canfield and published by Cuvillier Verlag. This book was released on 2018-02-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Bond number open capillary channel flows have been shown to exhibit collapsing free surfaces when a critical flow rate is exceeded, a phenomenon that is referred to as choking. As shown in this work, the critical flow rate can be pre-determined with sufficient accuracy for the presented channel geometry when certain boundary conditions are known a priori. The presented model that describes the flow rate limitation of stable liquid flow through the open channel is examined and compared to numerical simulations and experimental studies. In addition, the characteristics of the supercritical domain, in which bubbles are ingested passively into the flow in the channel, are described and a new model for bubble formation via choking is proposed. Offene Kapillarströmungen im Regime niedriger Bond-Zahlen weisen kollabierende Flüssigkeitsoberflächen auf, wenn ein kritischer Volumenstrom überschritten wird; ein Phänomen, das Choking genannt wird. In dieser Arbeit wird gezeigt, dass dieser kritischer Volumenstrom für die vorliegende Kanalgeometrie mit ausreichender Genauigkeit vorhergesagt werden kann, wenn bestimmte Randbedingungen des Strömungsproblems a priori bekannt sind. Das vorgestellte Modell zur Beschreibung der Volumenstrombegrenzung in einem offenen Kapillarkanal wird untersucht und mit numerischen und experimentellen Studien verglichen. Außerdem werden die Charakteristika des überkritischen Regimes, in das Gasblasen in die Strömung eingesogen werden, beschrieben und ein neues Modell für den Blasenentstehungsprozess im Choking vorgestellt.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1980 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preparation of Space Experiments written by Vladimir Pletser and published by BoD – Books on Demand. This book was released on 2020-09-02 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains how researchers design, prepare, develop, test and fly their science experiments on microgravity platforms before sending them to space. All preparation phases are explained and presented, including aircraft parabolic flights as part of spaceflight preparation. Twenty international authors, all experts in their own microgravity research field, contribute to chapters describing their experience to prepare experiments before space flights. Fields covered are Physical Sciences and Life Sciences. Physical Sciences covers fluid physics (vibration effects on diffusion; red blood cell dynamics; cavitation in microgravity; capillary driven flows) and material sciences (electromagnetic levitator onboard International Space Station). Life Sciences includes human physiology (sampling earlobe blood; human cardiovascular experiments; tumours in space) and neurophysiology (dexterous manipulation of objects in weightlessness).
Download or read book Liquid Acquisition Devices for Advanced In Space Cryogenic Propulsion Systems written by Jason William Hartwig and published by Academic Press. This book was released on 2015-11-21 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid Acquisition Devices for Advanced In-Space Cryogenic Propulsion Systems discusses the importance of reliable cryogenic systems, a pivotal part of everything from engine propulsion to fuel deposits. As some of the most efficient systems involve advanced cryogenic fluid management systems that present challenging issues, the book tackles issues such as the difficulty in obtaining data, the lack of quality data and models, and the complexity in trying to model these systems. The book presents models and experimental data based on rare and hard-to-obtain cryogenic data. Through clear descriptions of practical data and models, readers will explore the development of robust and flexible liquid acquisition devices (LAD) through component-level and full-scale ground experiments, as well as analytical tools. This book presents new and rare experimental data, as well as analytical models, in a fundamental area to the aerospace and space-flight communities. With this data, the reader can consider new and improved ways to design, analyze, and build expensive flight systems. - Presents a definitive reference for design ideas, analysis tools, and performance data on cryogenic liquid acquisition devices - Provides historical perspectives to present fundamental design models and performance data, which are applied to two practical examples throughout the book - Describes a series of models to optimize liquid acquisition device performance, which are confirmed through a variety of parametric component level tests - Includes video clips of experiments on a companion website
Download or read book The Engineering Index Annual written by and published by . This book was released on 1993 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Theoretical Microfluidics written by Henrik Bruus and published by Oxford University Press. This book was released on 2007-09-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics is a young and rapidly expanding scientific discipline, which deals with fluids and solutions in miniaturized systems, the so-called lab-on-a-chip systems. It has applications in chemical engineering, pharmaceutics, biotechnology and medicine. As the lab-on-a-chip systems grow in complexity, a proper theoretical understanding becomes increasingly important. The basic idea of the book is to provide a self-contained formulation of the theoretical framework of microfluidics, and at the same time give physical motivation and examples from lab-on-a-chip technology. After three chapters introducing microfluidics, the governing equations for mass, momentum and energy, and some basic flow solutions, the following 14 chapters treat hydraulic resistance/compliance, diffusion/dispersion, time-dependent flow, capillarity, electro- and magneto-hydrodynamics, thermal transport, two-phase flow, complex flow patterns and acousto-fluidics, as well as the new fields of opto- and nano-fluidics. Throughout the book simple models with analytical solutions are presented to provide the student with a thorough physical understanding of order of magnitudes and various selected microfluidic phenomena and devices. The book grew out of a set of well-tested lecture notes. It is with its many pedagogical exercises designed as a textbook for an advanced undergraduate or first-year graduate course. It is also well suited for self-study.
Download or read book Journal of Heat Transfer written by and published by . This book was released on 2005 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microgravity Research in Support of Technologies for the Human Exploration and Development of Space and Planetary Bodies written by Committee on Microgravity Research and published by National Academies Press. This book was released on 2000-07-17 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The frontier represented by the near solar system confronts humanity with intriguing challenges and opportunities. With the inception of the Human Exploration and Development of Space (HEDS) enterprise in 1995, NASA has acknowledged the opportunities and has accepted the very significant challenges. Microgravity Research in Support of Technologies for the Human Exploration and Development of Space and Planetary Bodies was commissioned by NASA to assist it in coordinating the scientific information relevant to anticipating, identifying, and solving the technical problems that must be addressed throughout the HEDS program over the coming decades. This report assesses scientific and related technological issues facing NASA's Human Exploration and Development of Space endeavor, looking specifically at mission enabling and enhancing technologies which, for development, require an improved understanding of fluid and material behavior in a reduced gravity environment.
Download or read book Generation and Applications of Extra Terrestrial Environments on Earth written by Daniel A. Beysens and published by CRC Press. This book was released on 2022-09-01 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been prepared under the auspice of the European Low Gravity Research Association (ELGRA). The main task of ELGRA is to foster the scientific community in Europe and beyond in conducting gravity and space-related research.This publication is dedicated to the science community, and especially to the next generation of scientists and engineers interested in space research and in the means to use Earth to reproduce the space environment. ELGRA provides a comprehensive description of space conditions and the means that have been developed on Earth to perform space environmental and (micro-) gravity related research. .The book covers ground-based research instruments and environments for both life and physical sciences research. It discusses the opportunities and limitations of protocols and instruments to compensate gravity or simulate microgravity, such as clinostats, random positioning machines, levitating magnets, electric fields, vibrations, tail suspension or head down tilt, as well as centrifuges for hyper-g studies. Other space environmental conditions are addressed too, like cosmic radiation or Mars atmospheric and soil properties to be replicated and simulated on Earth. Future long duration of manned missions, personal well-being and crew interaction are major issues dealt with.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1988 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Gallery of Combustion and Fire written by Charles E. Baukal, Jr. and published by Cambridge University Press. This book was released on 2020-09-03 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Gallery of Combustion and Fire is the first book to provide a graphical perspective of the extremely visual phenomenon of combustion in full color. It is designed primarily to be used in parallel with, and supplement existing combustion textbooks that are usually in black and white, making it a challenge to visualize such a graphic phenomenon. Each image includes a description of how it was generated, which is detailed enough for the expert but simple enough for the novice. Processes range from small scale academic flames up to full scale industrial flames under a wide range of conditions such as low and normal gravity, atmospheric to high pressures, actual and simulated flames, and controlled and uncontrolled flames. Containing over 500 color images, with over 230 contributors from over 75 organizations, this volume is a valuable asset for experts and novices alike.
Download or read book Capillarity and Wetting Phenomena written by Pierre-Gilles de Gennes and published by Springer Science & Business Media. This book was released on 2013-03-20 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of capillarity is in the midst of a veritable explosion. What is offered here is not a comprehensive review of the latest research but rather a compendium of principles designed for the undergraduate student and for readers interested in the physics underlying these phenomena.
Download or read book Handbook of Phase Change written by S.G. Kandlikar and published by Routledge. This book was released on 2019-01-22 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa
Download or read book Open Microfluidics written by Jean Berthier and published by John Wiley & Sons. This book was released on 2016-07-20 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Open microfluidics or open-surface is becoming fundamental in scientific domains such as biotechnology, biology and space. First, such systems and devices based on open microfluidics make use of capillary forces to move fluids, without any need for external energy. Second, the "openness" of the flow facilitates the accessibility to the liquid in biotechnology and biology, and reduces the weight in space applications. This book has been conceived to give the reader the fundamental basis of open microfluidics. It covers successively The theory of spontaneous capillary flow, with the general conditions for spontaneous capillary flow, and the dynamic aspects of such flows. The formation of capillary filaments which are associated to small contact angles and sharp grooves. The study of capillary flow in open rectangular, pseudo-rectangular and trapezoidal open microchannels. The dynamics of open capillary flows in grooves with a focus on capillary resistors. The case of very viscous liquids is analyzed. An analysis of suspended capillary flows: such flows move in suspended channels devoid of top cover and bottom plate. Their accessibility is reinforced, and such systems are becoming fundamental in biology. An analysis of “rails” microfluidics, which are flows that move in channels devoid of side walls. This geometry has the advantage to be compatible with capillary networks, which are now of great interest in biotechnology, for molecular detection for example. Paper-based microfluidics where liquids wick flat paper matrix. Applications concern bioassays such as point of care devices (POC). Thread-based microfluidics is a new domain of investigation. It is seeing presently many new developments in the domain of separation and filtration, and opens the way to smart bandages and tissue engineering. The book is intended to cover the theoretical aspects of open microfluidics, experimental approaches, and examples of application.
Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by IntechOpen. This book was released on 2012-10-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.
