Download or read book Stability in the Dynamics of Metal Cutting written by S.T. Chiriacescu and published by Elsevier. This book was released on 2013-10-22 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous models have been proposed for the study of the dynamic behaviour of cutting tools. An analysis of the main works published over the past 20 years reveal a lack of general methodology in the mathematical modelling of the dynamic cutting process (CP) and in the elastic structure (ES), as well as the absence of efficient and general methods for identifying the conditions under which the amplitudes of the vibration chatter between tool and workpiece can become problematic.This book provides a thorough review on the mathematical modelling and stability analysis of the dynamic machining system, presenting solutions for the practical problems that can be encountered. The practical points of the stability and instability of the DMS are discussed, together with various aspects of the modelling and identification of the CP and ES systems. The latest findings are examined in the context of a general study using matrix equations. Such a study on the matrix method is timely in view of the rapid spread in the use of mini and micro-computers.Based on the matrix equations of the CP and ES systems, the general equations of the DMS with time-invariant parameters are established, and various procedures for the actual stability analysis of this system are presented. Many examples are accompanied by illustrations which also provide adequate practical instructions for other problems in the stability analysis of the DMS. The last part of the book deals with the modelling and stability analysis of the DMS with time-varying parameters, random parameters and random input. The work is addressed primarily to those interested in the design and exploitation of machine tools in both industry and research. It will also be of interest to applied mathematicians, and can be used as a reference book for advanced courses in mechanical engineering.
Download or read book Stability in the Dynamics of Metal Cutting written by Sergiu T. Chiriacescu and published by . This book was released on 1990 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stability in the Dynamics of Metal Cutting written by S. T. Chiriacescu and published by . This book was released on 1990 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machining Dynamics written by Kai Cheng and published by Springer Science & Business Media. This book was released on 2008-10-26 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining dynamics play an essential role in the performance of the machine tools and machining processes which directly affect the removal rate, workpiece surface quality and dimensional and form accuracy. Machining Dynamics: Fundamentals and Applications will be bought by advanced undergraduate and postgraduate students studying manufacturing engineering and machining technology in addition to manufacturing engineers, production supervisors, planning and application engineers, and designers.
Download or read book Topics in Experimental Dynamics Substructuring and Wind Turbine Dynamics Volume 2 written by R. Mayes and published by Springer Science & Business Media. This book was released on 2012-04-11 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Experimental Dynamics Substructuring and Wind Turbine Dynamics, Volume 2, Proceedings of the 30th IMAC, A Conference and Exposition on Structural Dynamics, 2012, the second volume of six from the Conference, brings together 31 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book Effect and Control of Chatter Vibrations in Machine Tool Process written by and published by . This book was released on 1962 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machining Dynamics and Parameters Process Optimization written by Gorka Urbicain and published by MDPI. This book was released on 2021-03-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we move further into the 21st century, despite the fact that new technologies have emerged, machining remains the key operation to achieve high productivity and precision for high-added value parts in several sectors, but recent advances in computer applications should close the gap between simulations and industrial practices. This book, “Machining Dynamics and Parameters Process Optimization”, is oriented toward the different strategies and paths when it comes to increasing productivity and reliability in metal removal processes. The topics include the dynamic characterization of machine tools, experimental dampening techniques, and optimization algorithms combined with signal monitoring.
Download or read book Dynamic Substructures Volume 4 written by Andreas Linderholt and published by Springer. This book was released on 2019-06-14 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of Coupled Structures, Volume 4: Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics, 2019, the fourth volume of eight from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of the Dynamics of Coupled Structures, including papers on: Methods for Dynamic Substructures Applications for Dynamic Substructures Interfaces & Substructuring Frequency Based Substructuring Transfer Path Analysis
Download or read book Machining Dynamics written by Tony L. Schmitz and published by Springer. This book was released on 2018-10-30 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book trains engineers and students in the practical application of machining dynamics, with a particular focus on milling. The book walks readers through the steps required to improve machining productivity through chatter avoidance and reduced surface location error, and covers in detail topics such as modal analysis (including experimental methods) to obtain the tool point frequency response function, descriptions of turning and milling, force modeling, time domain simulation, stability lobe diagram algorithms, surface location error calculation for milling, beam theory, and more. This new edition includes updates throughout the entire text, new exercises and examples, and a new chapter on machining tribology. It is a valuable resource for practicing manufacturing engineers and graduate students interested in learning how to improve machining productivity through consideration of the process dynamics.
Download or read book Fundamentals of Metal Machining and Machine Tools Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 1988-11-15 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: New edition (previous, 1975) of a textbook for a college-level course in the principles of machine tools and metal machining. Math demands are limited to introductory calculus and that encountered in basic statics and dynamics. Topics include: operations, mechanics of cutting, temperature, tool life
Download or read book Manufacturing Automation written by Yusuf Altintas and published by Cambridge University Press. This book was released on 2012-01-16 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting is widely used in producing manufactured products. The technology has advanced considerably along with new materials, computers and sensors. This new edition considers the scientific principles of metal cutting and their practical application to manufacturing problems. It begins with metal cutting mechanics, principles of vibration and experimental modal analysis applied to solving shop floor problems. There is in-depth coverage of chatter vibrations, a problem experienced daily by manufacturing engineers. Programming, design and automation of CNC (computer numerical control) machine tools, NC (numerical control) programming and CAD/CAM technology are discussed. The text also covers the selection of drive actuators, feedback sensors, modelling and control of feed drives, the design of real time trajectory generation and interpolation algorithms and CNC-oriented error analysis in detail. Each chapter includes examples drawn from industry, design projects and homework problems. This is ideal for advanced undergraduate and graduate students and also practising engineers.
Download or read book Nonlinear Dynamics of Production Systems written by Günter Radons and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work provides a comprehensive insight into past developments in the application of non-linear dynamics, such as production systems in the manufacturing and process engineering, mechanical engineering and plant construction and automation technology. As such, it is the first publication to document the successful implementation of non-linear dynamics into current tasks or problems of engineering thus far unsolved. The interdisciplinary team of contributors from research and industry establishes ties between mechanical methods of manufacturing and new methods reaching the dynamics of production lines and complete production systems.
Download or read book Effect and Control of Chatter Vibrations in Machine Tool Process written by Gerald W. Long and published by . This book was released on 1968 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2005-12-02 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting applications span the entire range from mass production to mass customization to high-precision, fully customized designs. The careful balance between precision and efficiency is maintained only through intimate knowledge of the physical processes, material characteristics, and technological capabilities of the equipment and workpieces involved. The best-selling first edition of Metal Cutting Theory and Practice provided such knowledge, integrating timely research with current industry practice. This brilliant reference enters its second edition with fully updated coverage, new sections, and the inclusion of examples and problems. Supplying complete, up-to-date information on machine tools, tooling, and workholding technologies, this second edition stresses a physical understanding of machining processes including forces, temperatures, and surface finish. This provides a practical basis for troubleshooting and evaluating vendor claims. In addition to updates in all chapters, the book features three new chapters on cutting fluids, agile and high-throughput machining, and design for machining. The authors also added examples and problems for additional hands-on insight. Rounding out the treatment, an entire chapter is devoted to machining economics and optimization. Endowing you with practical knowledge and a fundamental understanding of underlying physical concepts, Metal Cutting Theory and Practice, Second Edition is a necessity for designing, evaluating, purchasing, and using machine tools.
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1984 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovating the Future Through Manufacturing written by Vivekanandu Shanmuganathan and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: Attempts to provide a holistic view of the changing scenario and current research trends in manufacturing. This volume can provide the necessary information to all researchers, professionals and beginners alike in introducing innovating manufacturing practices and furthering research on newer and improved manufacturing technologies.
