Download or read book Stability Analysis of Polymer Brushes written by Christopher Roderick and published by . This book was released on 2005 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The term polymer brush refers to the class of structures formed by polymers when attached to a surface at sufficiently high surface density so as to cause the polymers to stretch away from the surface to avoid each other. Considering specifically brushes formed by flexible, linear homopolymers attached by a single end to an impenetrable planar surface, this thesis investigates the stability of the laterally homogeneous phase of the brush in response to fluctuations of polymer density. The controlling factors studied are: the energetic interactions of the polymers with the bath of solvent particles in which the brush is immersed; the excluded volume of the polymers, which results from the mutual repulsion that exists between any two polymer segments; and the polymeric content in the brush, controlled by the grafting density and the length of the polymers. It is found that the stability of the laterally homogeneous phase of the brush is enhanced by increasing the polymer excluded volume, the polymeric content in the brush, or both. When incompressibility is modeled at the mean field level, it is found that there exists a region of parameter space in which the laterally homogeneous phase is stable for all values of the polymer-solvent interaction." --

Download or read book Polymer Brushes written by Rigoberto C. Advincula and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists, polymer chemists, surface physicists and materials engineers will find this book a complete and detailed treatise on the field of polymer brushes, their synthesis, characterization and manifold applications. In a first section, the various synthetic pathways and different surface materials are introduced and explained, followed by a second section covering important aspects of characterization and analysis in both flat surfaces and particles. These specific surface initiated polymerization (SIP) systems such as linear polymers, homopolymers, block copolymers, and hyperbranched polymers are unique compared to previously reported systems by chemisorption or physisorption. They have found their way in both large-scale and miniature applications of polymer brushes, which is covered in the last section. Such 'hairy' surfaces offer fascinating opportunities for addressing numerous problems of both academic and, in particular, industrial interest: high-quality, functional or protective coatings, composite materials, surface engineered particles, metal-organic interfaces, biological applications, micro-patterning, colloids, nanoparticles, functional devices, and many more. It is the desire of the authors that this book will be of benefit to readers who want to "brush-up on polymers".

Download or read book Mechanical Activation of Polymer Brushes and the Evolution of Stable Brush Architectures written by Christoph Scheibelein and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Brushes written by Vikas Mittal and published by CRC Press. This book was released on 2012-03-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Brushes: Substrates, Technologies, and Properties covers various aspects of polymer brush technology, including synthesis, properties, performance, and applications. It presents both experimental details and theoretical insights to enable a better understanding of the brush system. After an overview of polymer brush systems, the book discusses methods for grafting organic brushes from the surface of clay platelets and for the covalent grafting of PNIPAm brushes. It then describes ferrocene polymer brushes, nonfouling brushes on poly(ethylene terephthalate) film surfaces, brushes formed on the inner surface of cylindrical pores, and the "zipper brush" approach. The authors examine the use of scanning electrochemical microscopy for analyzing brushes and compare surface-controlled atom transfer radical polymerization and surface-controlled single-electron transfer living radical polymerization. They also explore the application of polymer brushes in the chromatographic separations of viruses and proteins and the suppression of proteins and cell adhesions. The text concludes with a look at how polymer brushes are synthesized by surface-initiated iniferter-mediated polymerization. This book provides a one-stop reference on the various substrates and technologies used to synthesize polymer brushes. The hands-on information in the text will help readers choose the proper synthesis methods and materials for their system.

Download or read book Controlled Radical Polymerization at and from Solid Surfaces written by Philipp Vana and published by Springer. This book was released on 2015-08-11 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science. The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics. Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist. Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned. Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students

Download or read book Polymer and Biopolymer Brushes written by Omar Azzaroni and published by John Wiley & Sons. This book was released on 2018-01-11 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serves as a guide for seasoned researchers and students alike, who wish to learn about the cross-fertilization between biology and materials that is driving this emerging area of science This book covers the most relevant topics in basic research and those having potential technological applications for the field of biopolymer brushes. This area has experienced remarkable increase in development of practical applications in nanotechnology and biotechnology over the past decade. In view of the rapidly growing activity and interest in the field, this book covers the introductory features of polymer brushes and presents a unifying and stimulating overview of the theoretical aspects and emerging applications. It immerses readers in the historical perspective and the frontiers of research where our knowledge is increasing steadily—providing them with a feeling of the enormous potential, the multiple applications, and the many up-and-coming trends behind the development of macromolecular interfaces based on the use of polymer brushes. Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials offers chapters on: Functionalization of Surfaces Using Polymer Brushes; Polymer Brushes by ATRP and Surface-Mediated RAFT Polymerization for Biological Functions; Electro-Induced Copper Catalyzed Surface Modification with Monolayer and Polymer Brush; Polymer Brushes on Flat and Curved Substrates; Biomimetic Anchors for Antifouling Polymer Brush Coating; Glycopolymer Brushes Presenting Sugars in Their Natural Form; Smart Surfaces Modified with Phenylboronic Acid-Containing Polymer Brushes; DNA Brushes; Polymer Brushes as Interfacial Materials for Soft Metal Conductors and Electronics; and more. Presents a comprehensive theory/simulation section that will be valuable for all readers Includes chapters not only on the biological applications of polymer brushes but also on biological systems that resemble polymer brushes on flat surfaces Addresses applications in coatings, friction, sensors, microelectromechanical systems, and biomaterials Devotes particular attention to the functional aspects of hybrid nanomaterials employing polymer brushes as functional units Polymer and Biopolymer Brushes: Fundamentals and Applications in Materials is aimed at both graduate students and researchers new to this subject as well as scientists already engaged in the study and development of polymer brushes.

Download or read book Polymer Analysis Polymer Theory written by Akihiro Abe and published by Springer Science & Business Media. This book was released on 2005-09-29 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series presents critical reviews of the present and future trends in polymer and biopolymer science including chemistry, physical chemistry, physics and materials science. It is addressed to all scientists at universities and in industry who wish to keep abreast of advances in the topics covered. Impact Factor Ranking: Always number one in Polymer Science. More information as well as the electronic version of the whole content available at: www.springerlink.com

Download or read book Visualization Manipulation and Force Spectroscopy of Cylindrical Polymer Brushes written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ph. D. thesis deals with the conformational study of individual cylindrical polymer brush molecules using atomic force microscopy (AFM). Imaging combined with single molecule manipulation has been used to unravel questions concerning conformational changes, desorption behavior and mechanical properties of individual macromolecules and supramolecular structures. In the first part of the thesis (chapter 5) molecular conformations of cylindrical polymer brushes with poly-(N-isopropylacrylamide) (PNIPAM) side chains were studied in various environmental conditions. Also micelle formation of cylindrical brush-coil blockcopolymers with polyacrylic acid side chains and polystyrene coil have been visualized. In chapter 6 the mechanical properties of single cylindrical polymer brushes with (PNIPAM) side chains were investigated. Assuming that the brushes adopt equilibrium conformation on the surface, an average persistence length of lp= (29 ± 3) nm was determined by the end-to-end distance vs. contour length analysis in terms of the wormlike chain (WLC) model. Stretching experiments suggest that an exact determination of the persistence length using force extension curves is impeded by the contribution of the side chains. Modeling the stretching of the bottle brush molecule as extension of a dual spring (side chain and main chain) explains the frequently observed very low persistence length arising from a dominant contribution of the side chain elasticity at small overall contour lengths. It has been shown that it is possible to estimate the "true" persistence length of the bottle brush molecule from the intercept of a linear extrapolation of the inverse square root of the apparent persistence length vs. the inverse contour length plot. By virtue of this procedure a "true" persistence length of 140 nm for the PNIPAM brush molecules is predicted. Chapter 7 and 8 deal with the force-extension behavior of PNIPAM cylindrical brushes studied in poor solvent conditions. The beh.

Download or read book Polymer Surfaces and Interfaces written by Manfred Stamm and published by Springer Science & Business Media. This book was released on 2008-01-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: In what is an extremely practical and applicable new work, experts provide concise explanations, with examples and illustrations, of the key techniques in this important field. In each case, after basic principles have been reviewed, applications of the experimental techniques are discussed and illustrated with specific examples. Scientists and engineers in research and development will benefit from an application-oriented book that helps them to find solutions to both fundamental and applied problems. They will know that the surfaces and interfaces of polymers play an important role in most of the application areas of polymers, from moulds, foils, and composites, to biomaterials and applications in micro- and nanotechnology.

Download or read book Polymer Tribology written by Sujeet K. Sinha and published by World Scientific. This book was released on 2009 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the new and now-expanding field of friction, wear, and other surface-related mechanical phenomena for polymers. Polymers have been used in various forms such as bulk, films, and composites in applications where their friction, wear resistance, and other surface-related properties have been effectively utilized. There are also many examples in which polymers have performed extremely well, such as in tyres, shoes, brakes, gears, bearings, small moving parts in electronics and MEMS, cosmetics/hair products, and artificial human joints. Around the world, much research is currently being undertaken to develop new polymers, in different forms, for further enhancing tribological performance and for finding novel applications. Keeping in view the importance of tribology of polymers for research and technology as well as the vast literature that is now available in research papers and review articles, this timely book brings together a wealth of research data for an understanding of the basic principles of the subject.

Download or read book Hydrogen bonded Interpolymer Complexes written by Vitaliy V. Khutoryanskiy and published by World Scientific. This book was released on 2009 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been an increased interest among researchers in hydrogen-bonded interpolymer complexes since the first pioneering papers were published in the early 1960s. Several hundred research papers have been published on various aspects of complex formation reactions in solutions and interfaces, properties of interpolymer complexes and their potential applications. This book focuses on the latest developments in the area of interpolymer complexation via hydrogen bonding. It represents a collection of original and review articles written by recognized experts from Germany, Greece, Kazakhstan, Poland, Romania, Russia, UK, Ukraine, and the USA. It highlights many important applications of interpolymer complexes, including the stabilization of colloidal systems, pharmaceuticals, and nanomaterials.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 2000 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Catalysis and Kinetics Molecular Level Considerations written by Guy B. Marin and published by Academic Press. This book was released on 2013-12-24 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Engineering was established in 1960 and is the definitive serial in the area. It is one of great importance to organic chemists, polymer chemists, and many biological scientists. Written by established authorities in the field, the comprehensive reviews combine descriptive chemistry and mechanistic insight and yield an understanding of how the chemistry drives the properties. This volume covers the topic of catalysis and kinetics and aspects in chemical engineering. Control and optimization of process systems Polyelectrolytes Propane dehydrogenation and selective oxidation of hydrogen Chromium catalysts for ethylene polymerization and oligomerization Computational simulation of rare Earth catalysis

Download or read book Synthesis and Evaluation of Polymer Brushes and Crosslinked Thin Films as Scaffolds for Biomolecule Immobilization written by Sean P. Cullen and published by . This book was released on 2008 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Biomaterials II written by Kevin Healy and published by Elsevier. This book was released on 2017-05-18 with total page 4865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications

Download or read book Functional Polymer Films 2 Volume Set written by Wolfgang Knoll and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 1107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very thin film materials have emerged as a highly interesting and useful quasi 2D-state functionality. They have given rise to numerous applications ranging from protective and smart coatings to electronics, sensors and display technology as well as serving biological, analytical and medical purposes. The tailoring of polymer film properties and functions has become a major research field. As opposed to the traditional treatise on polymer and resin-based coatings, this one-stop reference is the first to give readers a comprehensive view of the latest macromolecular and supramolecular film-based nanotechnology. Bringing together all the important facets and state-of-the-art research, the two well-structured volumes cover film assembly and depostion, functionality and patterning, and analysis and characterization. The result is an in-depth understanding of the phenomena, ordering, scale effects, fabrication, and analysis of polymer ultrathin films. This book will be a valuable addition for Materials Scientists, Polymer Chemists, Surface Scientists, Bioengineers, Coatings Specialists, Chemical Engineers, and Scientists working in this important research field and industry.

Download or read book Thermal Degradation of Polymer Blends Composites and Nanocomposites written by P. M. Visakh and published by Springer. This book was released on 2015-03-31 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers a deep insight into thermal polymer degradation features and put a particular emphasis on blends, composites and nanocomposites. It examines the thermal stability and the mechanism of degrading for every class of polymer substances and studies the effect on reinforcement to all classes. The book further explores the thermal stability when nano particles are added and summarizes the latest studies and application relevant results. This book offers a valuable reference source to graduate and post graduate students, engineering students, research scholars and polymer engineers from industry.