Download or read book SRv6 Network Programming written by Zhenbin Li and published by CRC Press. This book was released on 2021-06-29 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: SRv6 Network Programming, beginning with the challenges for Internet Protocol version 6 (IPv6) network development, describes the background, roadmap design, and implementation of Segment Routing over IPv6 (SRv6), as well as the application of this technology in traditional and emerging services. The book begins with the development of IP technologies by focusing on the problems encountered during MPLS and IPv6 network development, giving readers insights into the problems tackled by SRv6 and the value of SRv6. It then goes on to explain SRv6 fundamentals, including SRv6 packet header design, the packet forwarding process, protocol extensions such as Interior Gateway Protocol (IGP), Border Gateway Protocol (BGP), and Path Computation Element Protocol (PCEP) extensions, and how SRv6 supports existing traffic engineering (TE), virtual private networks (VPN), and reliability requirements. Next, SRv6 network deployment is introduced, covering the evolution paths from existing networks to SRv6 networks, SRv6 network deployment processes, involved O&M technologies, and emerging 5G and cloud services supported by SRv6. Bit Index Explicit Replication IPv6 encapsulation (BIERv6), an SRv6 multicast technology, is then introduced as an important supplement to SRv6 unicast technology. The book concludes with a summary of the current status of the SRv6 industry and provides an outlook for new SRv6-based technologies. SRv6 Network Programming: Ushering in a New Era of IP Networks collects the research results of Huawei SRv6 experts and reflects the latest development direction of SRv6. With rich, clear, practical, and easy-to-understand content, the volume is intended for network planning engineers, technical support engineers and network administrators who need a grasp of the most cutting-edge IP network technology. It is also intended for communications network researchers in scientific research institutions and universities. Authors: Zhenbin Li is the Chief Protocol Expert of Huawei and member of the IETF IAB, responsible for IP protocol research and standards promotion at Huawei. Zhibo Hu is a Senior Huawei Expert in SR and IGP, responsible for SR and IGP planning and innovation. Cheng Li is a Huawei Senior Pre-research Engineer and IP standards representative, responsible for Huawei's SRv6 research and standardization.

Download or read book Network Programmability with YANG written by Benoit Claise and published by Addison-Wesley Professional. This book was released on 2019-05-10 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, networks must evolve and scale faster than ever. You can’t manage everything by hand anymore: You need to automate relentlessly. YANG, along with the NETCONF, RESTCONF, or gRPC/gNMI protocols, is the most practical solution, but most implementers have had to learn by trial and error. Now, Network Programmability with YANG gives you complete and reliable guidance for unlocking the full power of network automation using model-driven APIs and protocols. Authored by three YANG pioneers, this plain-spoken book guides you through successfully applying software practices based on YANG data models. The authors focus on the network operations layer, emphasizing model-driven APIs, and underlying transports. Whether you’re a network operator, DevOps engineer, software developer, orchestration engineer, NMS/OSS architect, service engineer, or manager, this guide can help you dramatically improve value, agility, and manageability throughout your network. Discover the value of implementing YANG and Data Model-Driven Management in your network Explore the layers and components of a complete working solution Build a business case where value increases as your solution grows Drill down into transport protocols: NETCONF, RESTCONF, and gNMI/gRPC See how telemetry can establish a valuable automated feedback loop Find data models you can build on, and evaluate models with similar functionality Understand models, metadata, and tools from several viewpoints: architect, operator, module author, and application developer Walk through a complete automation journey: business case, service model, service implementation, device integration, and operation Leverage the authors’ experience to design successful YANG models and avoid pitfalls

Download or read book Ipv6 Network Programming written by and published by . This book was released on 2005-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundations of Python Network Programming written by John Goerzen and published by Apress. This book was released on 2013-06-06 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Covers low-level networking in Python —essential for writing a new networked application protocol. * Many working examples demonstrate concepts in action -- and can be used as starting points for new projects. * Networked application security is demystified. * Exhibits and explains multitasking network servers using several models, including forking, threading, and non-blocking sockets. * Features extensive coverage of Web and E-mail. Describes Python's database APIs.

Download or read book IPv6 Network Slicing written by Zhenbin Li and published by CRC Press. This book was released on 2024-03-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an essential guide to IPv6 network slicing. It covers both the fundamentals and cutting-edge technologies of IPv6 network slicing, and provides insights into future industry developments. IP network slicing is an architectural innovation that provides multiple dedicated logical networks on a shared physical network. It comprises a complete set of solutions designed to meet the differentiated service requirements of the 5G and cloud era. This book focuses on IP network slicing based on the data plane of IPv6, a second-generation network layer protocol standard designed to address many of the problems encountered with IPv4. The book explores the technical implementation of IPv6 network slicing by introducing its architecture, implementation solutions, resource partitioning technologies, data plane technologies, and control plane technologies. It also explains how to deploy IPv6 network slicing through slice controllers and provides deployment suggestions based on Huawei practices. It is a must-read for professional engineers involved in network planning, design, and technology support. Researchers and students in information and communication technology and communication system design will also find it useful.

Download or read book High Performance Computing written by Heike Jagode and published by Springer Nature. This book was released on 2020-10-19 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of 10 workshops held at the 35th International ISC High Performance 2020 Conference, in Frankfurt, Germany, in June 2020: First Workshop on Compiler-assisted Correctness Checking and Performance Optimization for HPC (C3PO); First International Workshop on the Application of Machine Learning Techniques to Computational Fluid Dynamics Simulations and Analysis (CFDML); HPC I/O in the Data Center Workshop (HPC-IODC); First Workshop \Machine Learning on HPC Systems" (MLHPCS); First International Workshop on Monitoring and Data Analytics (MODA); 15th Workshop on Virtualization in High-Performance Cloud Computing (VHPC). The 25 full papers included in this volume were carefully reviewed and selected. They cover all aspects of research, development, and application of large-scale, high performance experimental and commercial systems. Topics include high-performance computing (HPC), computer architecture and hardware, programming models, system software, performance analysis and modeling, compiler analysis and optimization techniques, software sustainability, scientific applications, deep learning.

Download or read book Simulation in Computer Network Design and Modeling Use and Analysis written by Al-Bahadili, Hussein and published by IGI Global. This book was released on 2012-02-29 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book reviews methodologies in computer network simulation and modeling, illustrates the benefits of simulation in computer networks design, modeling, and analysis, and identifies the main issues that face efficient and effective computer network simulation"--Provided by publisher.

Download or read book Network Programmability and Automation Fundamentals written by Khaled Abuelenain and published by Cisco Press. This book was released on 2021-05-06 with total page 2820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modernize and optimize network management with APIs and automation Legacy network management approaches don't scale adequately and can't be automated well. This guide will help meet tomorrow's challenges by adopting network programmability based on Application Programming Interfaces (APIs). Using these techniques, you can improve efficiency, reliability, and flexibility; simplify implementation of high-value technologies; automate routine administrative and security tasks; and deploy services far more rapidly. Four expert authors help you transition from a legacy mindset to one based on solving problems with software. They explore today's emerging network programmability and automation ecosystem; introduce each leading programmable interface; and review the protocols, tools, techniques, and technologies that underlie network programmability. You'll master key concepts through hands-on examples you can run using Linux, Python, Cisco DevNet sandboxes, and other easily accessible tools. This guide is for all network architects, engineers, operations, and software professionals who want to integrate programmability into their networks. It offers valuable background for Cisco DevNet certification—and skills you can use with any platform, whether you have software development experience or not. Master core concepts and explore the network programmability stack Manage network software and run automation scripts in Linux environments Solve real problems with Python and its Napalm and Nornir automation frameworks Make the most of the HTTP protocol, REST architectural framework, and SSH Encode your data with XML, JSON, or YAML Understand and build data models using YANG that offer a foundation for model-based network programming Leverage modern network management protocols, from gRPC and gNMI to NETCONF and RESTCONF Meet stringent service provider KPIs in large-scale, fast-changing networks Program Cisco devices running IOS XE, IOS XR, and NX-OS as well as Meraki, DNA Center, and Webex platforms Program non-Cisco platforms such as Cumulus Linux and Arista EOS Go from “zero to hero” with Ansible network automation Plan your next steps with more advanced tools and technologies

Download or read book UNIX Network Programming written by W. Richard Stevens and published by Prentice Hall. This book was released on 1998 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software -- Operating Systems.

Download or read book GB T 2023 GB 2023 Chinese National Standard PDF English Catalog year 2023 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-04-12 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2023.

Download or read book Wireless Algorithms Systems and Applications written by Zhe Liu and published by Springer Nature. This book was released on 2021-09-08 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set constitutes the proceedings of the 16th International Conference on Wireless Algorithms, Systems, and Applications, WASA 2021, which was held during June 25-27, 2021, in Nanjing, China.The 103 full and 57 short papers presented in these proceedings were carefully reviewed and selected from 315 submissions. Part III of the set includes the papers of the contributors that took part in the workshops co-located with the conference.The following topics are covered in the volume: network protocols, signal processing, wireless telecommunication systems, routing algorithms, cryptography, local area networks, and others.

Download or read book Proceedings of the 12th International Conference on Computer Engineering and Networks written by Qi Liu and published by Springer Nature. This book was released on 2022-10-19 with total page 1506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceeding is a collection of the papers accepted by the CENet2022 – the 12th International Conference on Computer Engineering and Networks held on November 4-7, 2022 in Haikou, China. The topics focus but are not limited to Internet of Things and Smart Systems, Artificial Intelligence and Applications, Communication System Detection, Analysis and Application, and Medical Engineering and Information Systems. Each part can be used as an excellent reference by industry practitioners, university faculties, research fellows and undergraduates as well as graduate students who need to build a knowledge base of the most current advances and state-of-practice in the topics covered by this conference proceedings. This will enable them to produce, maintain, and manage systems with high levels of trustworthiness and complexity.

Download or read book Software Defined Wide Area Network Architectures and Technologies written by Cheng Sheng and published by CRC Press. This book was released on 2021-05-05 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting with problems and challenges faced by enterprise WANs, Software-Defined Wide Area Network Architectures and Technologies provides a detailed description of SD-WAN’s background and basic features, as well as the system architecture, operating mechanism, and application scenarios of the SD-WAN solution based on the implementation of Huawei SD-WAN Solution. It also explains key SD-WAN technologies and analyzes real SD-WAN deployment cases, affording readers with design methods and deployment suggestions for the SD-WAN solution. The information presented in this book is easy to understand and very practical. It enables you to become adept in the SD-WAN solution’s implementation and design principles. The book is intended for ICT practitioners, such as network technical support engineers, network administrators, and network planning engineers, to use in studying theory. Furthermore, it serves as reference material for network technology enthusiasts. Authors Cheng Sheng is the Chief Architect of Huawei’s SD-WAN Solution. He has nearly 20 years of experience in network product and solution design, as well as extensive expertise in product design and development, network planning and design, and network engineering project implementation. Jie Bai is an Architect of Huawei’s SD-WAN Solution. He is well versed in Huawei security products and SD-WAN Solution and has written books such as Huawei Firewall Technology Talk as well as Huawei Anti-DDoS Technology Talk. Qi Sun is a Senior Information Architect of Huawei, and he is knowledgeable in Huawei SD-WAN Solution, CloudVPN Solution, and Cloud Management Solution. He also participated in the information architecture design and delivery of multiple solutions.

Download or read book T Byte Hybrid Cloud Infrastructure July 2021 written by IT Shades and published by EGBG Services LLC. This book was released on 2021-08-06 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document brings together a set of latest data points and publicly available information relevant for Hybrid Cloud Infrastructure Industry. We are very excited to share this content and believe that readers will benefit from this periodic publication immensely.

Download or read book Campus Network Architectures and Technologies written by Ningguo Shen and published by CRC Press. This book was released on 2021-05-05 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Campus Network Architectures and Technologies begins by describing the service challenges facing campus networks, and then details the intent-driven campus network architectures and technologies of Huawei Cloud Campus Solution. After reading this book, you will have a comprehensive understanding of next-generation campus network solutions, technical implementations, planning, design, and other know-how. Leveraging Huawei’s years of technical expertise and practices in the campus network field, this book systematically describes the use of technical solutions such as virtualization, big data, AI, and SDN in campus networks. You will be able to reconstruct campus networks quickly and efficiently utilizing this informative description. Additionally, this book provides detailed suggestions for campus network design and deployment based on Huawei's extensive project implementation experience, assisting with the construction of automated and intelligent campus networks required to cope with challenges. This is a practical, informative, and easy-to-understand guide for learning about and designing campus networks. It is intended for network planning engineers, network technical support engineers, network administrators, and enthusiasts of campus network technologies. Authors Ningguo Shen is Chief Architect for Huawei’s campus network solutions. He has approximately 20 years' experience in campus network product and solution design, as well as a wealth of expertise in network planning and design. Mr. Shen previously served as a system engineer for the campus switch, data center switch, and WLAN product lines, and led the design of Huawei’s intent-driven campus network solution. Bin Yu is an Architect for Huawei's campus network solutions. He has 12 years’ experience in campus network product and solution design, as well as extensive expertise in network planning and design and network engineering project implementation. Mr. Yu once led the design of multiple features across various campus network solutions. Mingxiang Huang is a Documentation Engineer for Huawei’s campus network solutions. He has three years of technical service experience, and four years of expertise in developing campus network product documentation. Mr. Huang was previously in charge of writing manuals for Huawei router and switch products. He has authored many popular technical series, including Be an OSPF Expert, Insight into Routing Policies, and Story behind Default Routes. Hailin Xu is a Documentation Engineer for Huawei’s campus network solutions. He has two years of marketing experience in smart campus solutions, and six years of expertise in developing network products and solution documentation. Extremely familiar with Huawei's campus network products and solutions, Mr. Xu was previously in charge of writing manuals for Huawei routers, switches, and campus network solutions. In addition, he has participated in smart campus marketing projects within such sectors as education, government, and real estate.

Download or read book Cloud Data Center Network Architectures and Technologies written by Lei Zhang and published by CRC Press. This book was released on 2021-04-23 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cloud Data Center Network Architectures and Technologies has been written with the support of Huawei's vast technical knowledge and experience in the data center network (DCN) field, as well as its understanding of customer service requirements. This book describes in detail the architecture design, technical implementation, planning and design, and deployment suggestions for cloud DCNs based on the service challenges DCNs encounter. It starts by describing the overall architecture and technical evolution of DCNs, with the aim of helping readers understand the development of DCNs. It then proceeds to explain the design and implementation of cloud DCNs, including the service model of a single data center (DC), construction of physical and logical networks of DCs, construction of multiple DCNs, and security solutions of DCs. Next, this book dives deep into practices of cloud DCN deployment based on real-world cases to help readers better understand how to build cloud DCNs. Finally, this book introduces DCN openness and some of the hottest forward-looking technologies. In summary, you can use this book as a reference to help you to build secure, reliable, efficient, and open cloud DCNs. It is intended for technical professionals of enterprises, research institutes, information departments, and DCs, as well as teachers and students of computer network-related majors in colleges and universities. Authors Lei Zhang Mr. Zhang is the Chief Architect of Huawei's DCN solution. He has more than 20 years' experience in network product and solution design, as well as a wealth of expertise in product design and development, network planning and design, and network engineering project implementation. He has led the design and deployment of more than 10 large-scale DCNs for Fortune Global 500 companies worldwide. Le Chen Mr. Chen is a Huawei DCN Solution Documentation Engineer with eight years' experience in developing documents related to DCN products and solutions. He has participated in the design and delivery of multiple large-scale enterprise DCNs. Mr. Chen has written many popular technical document series, such as DCN Handbook and BGP Topic.

Download or read book Enterprise Wireless Local Area Network Architectures and Technologies written by Rihai Wu and published by CRC Press. This book was released on 2021-05-03 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written with the support of Huawei's large accumulation of technical knowledge and experience in the WLAN field, as well as its understanding of customer service requirements. First, the book covers service challenges facing enterprise wireless networks, along with detailing the latest evolution of Wi-Fi standards, air interface performance, and methods for improving user experience in enterprise scenarios. Furthermore, it illustrates typical networking, planning, and scenario-specific design for enterprise WLANs, and provides readers with a comprehensive understanding of enterprise WLAN planning, design, and technical implementation, as well as suggestions for deployment. This is a practical and easy-to-understand guide to WLAN design, and is written for WLAN technical support and planning engineers, network administrators, and enthusiasts of network technology. Authors Rihai Wu is Chief Architect of Huawei's campus network WLAN solution with 16 years of experience in wireless communications product design and a wealth of expertise in network design and product development. He previously served as a designer and developer of products for Wideband Code Division Multiple Access (WCDMA), LTE indoor small cells, and WLAN. Xun Yang is a WLAN standard expert from Huawei. He has nine years of experience in formulating WLAN standards, and previously served as 802.11ac Secretary, 802.11ah PHY Ad-hoc Co-chair, and 802.11ax MU Ad Hoc Sub Group Co-chair. Mr. Yang oversees technical research, the promotion of standards, and industrialization in the WLAN field, and has filed more than 100 patents. Xia Zhou is a documentation engineer of Huawei's campus network WLAN solution. She has 10 years of experience in creating documents for campus network products. Ms. Zhou was previously in charge of writing manuals for Huawei data center switches, WLAN products, and campus network solutions. She is also the author of Campus Network Solution Deployment Guide and was a co-sponsor of technical sessions such as WLAN from Basics to Proficiency. Yibo Wang is a documentation engineer of Huawei's campus network WLAN solution. He has nine years of experience in creating documents for campus network products. Mr. Wang was previously in charge of writing manuals for Huawei switches, WLAN products, and routers. He was also a co-sponsor of technical sessions such as WLAN from Basics to Proficiency and HCIA-WLAN certification training courses.