Download or read book Sputtered Aluminium Oxide and Amorphous Silicon for Silicon Solar Cells written by Xinyu Zhang and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-efficiency silicon solar cells have been attracting an increased interest in recent years. Surface passivation is essential for various types of high-performance solar cells, particularly when thinner silicon wafers are used to reduce the material cost. Passivating dielectric thin films have been widely studied and used in solar cells designs, these include atomic-layer deposited (ALD) aluminium oxide, plasma-enhanced chemical vapour deposited (PECVD) silicon nitride and PECVD intrinsic amorphous silicon. The aim of this thesis is to develop and optimise an alternative deposition method for surface passivating films: sputtering. Sputtering is especially attractive for industrial production, due to its high throughput, easy and safe operation and global cost-effectiveness. This thesis has focussed on optimising the reactive sputtering of aluminium oxide, using an aluminium target, and the non-reactive sputtering of amorphous silicon, using a silicon target. A key innovation has been the addition of hydrogen to the mix of gasses that form the plasma, which permits to incorporate hydrogen into the films, leading to a significantly improved surface passivation quality compared to non-hydrogenated films. We have achieved the best surface passivation results by sputtered aluminium oxide to date, with an effective surface recombination velocity of 1 cm/s on 1.5 ohm-cm n-type silicon. This result is similar to the SRV of 0.9 cm/s measured on aluminium oxide films deposited by PA-ALD on the same substrates. Good passivation was also achieved on p-type silicon. The investigations into the reactive sputtering process have shown that the film properties are closely related to the oxidation level of the aluminium target, which can be controlled by adjusting process parameters. It has also been found that the presence of hydrogen in the plasma is beneficial for establishing the optimum conditions of the deposition; not only does the surface passivation quality improve, but the reactive sputtering process becomes easier to control as well.We have also shown - for the first time - that intrinsic amorphous silicon (a-Si:H) films by sputtering deposition are capable of providing an excellent passivation of crystalline silicon surfaces. A SRV of 1.5 cm/s on 1.5 ohm-cm n-type silicon and SRV of 9 cm/s on 1 ohm-cm p-type silicon have been achieved, which are comparable to the commonly used PECVD deposited a-Si:H films. After investigating the film properties using Fourier Transform Infrared Spectroscopy (FTIR), we observe that our sputtered a-Si:H films have a characteristic signature in terms of chemical bonding configurations, where several types of silicon-hydrogen bonds exist. From those measurements we have estimated that there is approximately a 4% hydrogen concentration in the films, sufficient to achieve excellent surface passivation. Finally, the thesis also presents initial attempts at developing doped amorphous silicon films, which could enable the development of an all-sputtered silicon heterojunction solar cell technology. Lightly doped a-Si:H films were deposited using a 1% boron doped silicon target and a 0.01% phosphorus doped silicon target. We have found an appropriate way to avoid surface passivation degradation caused by the doped layer deposition onto an intrinsic a-Si:H layer.
Download or read book Fabrication of Polycrystalline Si Solar Cells Via Aluminum Induced Crystallization of Sputtered and Plasma Enhanced Chemical Vapor Deposited Amorphous Silicon written by Albert M. Estevez and published by . This book was released on 2003 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Amorphous and Microcrystalline Silicon Applied in Very Thin Tandem Solar Cells written by Sandra Schicho and published by Forschungszentrum Jülich. This book was released on 2011 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Amorphous silicon solar cells written by David Emil Carlson and published by . This book was released on 1979 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Amorphous and Microcrystalline Silicon Solar Cells Modeling Materials and Device Technology written by Ruud E.I. Schropp and published by Springer. This book was released on 2016-07-18 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous silicon solar cell technology has evolved considerably since the first amorphous silicon solar cells were made at RCA Laboratories in 1974. Scien tists working in a number of laboratories worldwide have developed improved alloys based on hydrogenated amorphous silicon and microcrystalline silicon. Other scientists have developed new methods for growing these thin films while yet others have developed new photovoltaic (PV) device structures with im proved conversion efficiencies. In the last two years, several companies have constructed multi-megawatt manufacturing plants that can produce large-area, multijunction amorphous silicon PV modules. A growing number of people be lieve that thin-film photovoltaics will be integrated into buildings on a large scale in the next few decades and will be able to make a major contribution to the world's energy needs. In this book, Ruud E. I. Schropp and Miro Zeman provide an authoritative overview of the current status of thin film solar cells based on amorphous and microcrystalline silicon. They review the significant developments that have occurred during the evolution of the technology and also discuss the most im portant recent innovations in the deposition of the materials, the understanding of the physics, and the fabrication and modeling of the devices.
Download or read book Development of RF Sputtered Thin Film Amorphous Silicon Towards a P I N Solar Cell written by F. A. Benson and published by . This book was released on 1985 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Si Silicon written by Eberhard F. Krimmel and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of three Gmelin Handbook volumes in the silicon se ries that will cover silicon nitride, a normaUy solid material with the idealized formula Si N . This volume, 3 4 "Silicon" Supplement Volume B Sc, is devoted to applications of silicon nitride in microelec tronics and solar ceUs. The compendium is the product of a critical selection among more than 17600 publications on silicon nitride issued up to January 1990. Out of a total of 5900 publications dealing with the fabrication and use of microelectronic devices (including 2400 Japanese patent applications), about 4000 papers have been selected for this volume. The current volume is grouped into three parts. Chapters 2 to 8 deal with general, non specific microelectronic applications of silicon nitride, Chapters 9 to 31 cover applications of silicon nitride in specific devices and device components, and Chapter 32 is devoted exclusively to applications in solar ceUs, including information on our general understanding of the role of silicon nitride in photovoltaic devices. Experimental results on the preparation of silicon nitride layers for application in unspeci fied devices are in Chapter 2. Whenever the preparation is in connection with specific devices, the information is presented in the respective chapters. The general preparation of silicon nitride layers is not covered in this volume, but will appear in "Silicon" Supplement Volume B 5a. See also the Introductory Remarks, Chapter 1, p. 1.
Download or read book Ion Beam Treatment of Functional Layers in Thin film Silicon Solar Cells written by Wendi Zhang and published by Forschungszentrum Jülich. This book was released on 2013 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Energy Update written by and published by . This book was released on 1984 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radio frequency Sputtered Amorphous Silicon for Use in Solar Cells written by M. G. Hack and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Layer Deposition of Aluminum Oxide on Crystalline Silicon written by Florian Werner and published by . This book was released on 2014 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminum Oxide for the Surface Passivation of High Efficiency Silicon Solar Cells written by Armin Richter and published by . This book was released on 2015-02-23 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Perspectives on Functional Micro and Nanoscale Coatings written by Zuzuarregui, Ana and published by IGI Global. This book was released on 2016-04-11 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just as chemistry is a part of our daily lives, functional coatings can be found in almost every object, gadget or device you can see or touch. However, in the last 20 years the advances made in the preparation of different functional coatings with diverse compositions have allowed the development of nanoscale coatings that are more cost-effective and environmentally conscious than traditional coatings. Research Perspectives on Functional Micro- and Nanoscale Coatings highlights critical research on preparation methods, modification, organization, and utilization of functional coatings in micro, nano, and biotechnology. Emphasizing emerging developments and global research perspectives, this publication is a pivotal resource for engineers, researchers, and graduate-level students interested in learning about emerging developments in functional coatings and nanotechnology.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clean Electricity From Photovoltaics 2nd Edition written by Mary D Archer and published by World Scientific. This book was released on 2014-10-17 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Clean Electricity from Photovoltaics, first published in 2001, provides an updated account of the underlying science, technology and market prospects for photovoltaics. All areas have advanced considerably in the decade since the first edition was published, which include: multi-crystalline silicon cell efficiencies having made impressive advances, thin-film CdTe cells having established a decisive market presence, and organic photovoltaics holding out the prospect of economical large-scale power production.
Download or read book Surface Passivation of Industrial Crystalline Silicon Solar Cells written by Joachim John and published by Institution of Engineering and Technology. This book was released on 2018-11-15 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface passivation of silicon solar cells describes a technology for preventing electrons and holes to recombine prematurely with one another on the wafer surface. It increases the cell's energy conversion efficiencies and thus reduces the cost per kWh generated by a PV system.
Download or read book Manufacturing and Engineering Technology ICMET 2014 written by Ai Sheng and published by CRC Press. This book was released on 2014-11-24 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Engineering Technology brings together around 200 peer-reviewed papers presented at the 2014 International Conference on Manufacturing and Engineering Technology, held in San-ya, China, October 17-19, 2014. The main objective of these proceedings is to take the Manufacturing and Engineering Technology discussion a step further. Contributions cover Manufacture, Mechanical, Materials Science, Industrial Engineering, Control, Information and Computer Engineering. Furthermore, these proceedings provide a platform for researchers, engineers, academics as well as industrial professionals from all over the world to present their research results and development activities in Manufacturing Science and Engineering Technology.
