Download or read book Polarized Light and Optical Systems written by Russell Chipman and published by CRC Press. This book was released on 2018-07-16 with total page 1037 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polarized Light and Optical Systems presents polarization optics for undergraduate and graduate students in a way which makes classroom teaching relevant to current issues in optical engineering. This curriculum has been developed and refined for a decade and a half at the University of Arizona’s College of Optical Sciences. Polarized Light and Optical Systems provides a reference for the optical engineer and optical designer in issues related to building polarimeters, designing displays, and polarization critical optical systems. The central theme of Polarized Light and Optical Systems is a unifying treatment of polarization elements as optical elements and optical elements as polarization elements. Key Features Comprehensive presentation of Jones calculus and Mueller calculus with tables and derivations of the Jones and Mueller matrices for polarization elements and polarization effects Classroom-appropriate presentations of polarization of birefringent materials, thin films, stress birefringence, crystal polarizers, liquid crystals, and gratings Discussion of the many forms of polarimeters, their trade-offs, data reduction methods, and polarization artifacts Exposition of the polarization ray tracing calculus to integrate polarization with ray tracing Explanation of the sources of polarization aberrations in optical systems and the functional forms of these polarization aberrations Problem sets to build students’ problem-solving capabilities.
Download or read book How to Write a Good Scientific Paper written by CHRIS A. MACK and published by . This book was released on 2018 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many scientists and engineers consider themselves poor writers or find the writing process difficult. The good news is that you do not have to be a talented writer to produce a good scientific paper, but you do have to be a careful writer. In particular, writing for a peer-reviewed scientific or engineering journal requires learning and executing a specific formula for presenting scientific work. This book is all about teaching the style and conventions of writing for a peer-reviewed scientific journal. From structure to style, titles to tables, abstracts to author lists, this book gives practical advice about the process of writing a paper and getting it published.
Download or read book Optical Lithography written by Burn Jeng Lin and published by SPIE-International Society for Optical Engineering. This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written for new and experienced engineers, technology managers, and senior technicians who want to enrich their understanding of the image formation physics of a lithographic system. Readers will gain knowledge of the basic equations and constants that drive optical lithography, learn the basics of exposure systems and image formation, and come away with a full understanding of system components, processing, and optimization. Readers will also get an overview of the outlook of optical lithography and means to enhance semiconductor manufacturing. This second edition blends the author's unique experience in research, teaching, and world-class high-volume manufacturing to add brand new material on proximity printing, as well as updated and expanded material on exposure systems, image formation, E-D methodology, hardware components, processing and optimization, and EUV and immersion lithographies.
Download or read book Integrated Optomechanical Analysis written by Keith B. Doyle and published by SPIE Press. This book was released on 2002 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial presents optomechanical modeling techniques to effectively design and analyze high-performance optical systems. It discusses thermal and structural modeling methods that use finite-element analysis to predict the integrity and performance of optical elements and optical support structures. Includes accompanying CD-ROM with examples.
Download or read book Optical Coating Technology written by Philip Baumeister and published by SPIE Press. This book was released on 2004 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Baumeister organizes this book around the key subjects associated with functions of optical thin film performance, and provides a valuable resource in the field of thin film technology. The information is widely backed up with citations to patents and published literature. The author draws from 25 years of experience teaching classes at the UCLA Extension Program, and at companies worldwide to answer questions, such as: what are the conventions for a given analysis formalism? and, what other design approaches have been tried for this application?
Download or read book DN to lambda written by James R. Janesick and published by SPIE Press. This book was released on 2007 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 230 figures that present experimental CCD and CMOS data products and modeling simulations connected to photon transfer. This title also provides hundreds of relations that support photon transfer theory, simulations, and data.
Download or read book Scientific Charge coupled Devices written by James R. Janesick and published by SPIE Press. This book was released on 2001 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book provides invaluable information to scientists, engineers, and product managers involved with imaging CCDs, as well as those who need a comprehensive introduction to the subject."--Page 4 de la couverture
Download or read book Discovering Light written by Sara Aissati and published by . This book was released on 2021-09-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is light? Where are optics and photonics present in our lives and in nature? What lies behind different optical phenomena? What is an optical instrument? How does the eye resemble an optical instrument? How can we explain human vision? This book, written by a group of young scientists, answers these questions and many more.
Download or read book Optical Engineering Fundamentals written by Bruce H. Walker and published by SPIE Press. This book was released on 1998 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text aims to expose students to the science of optics and optical engineering without the complications of advanced physics and mathematical theory.
Download or read book Field Guide to Geometrical Optics written by John E. Greivenkamp and published by Society of Photo Optical. This book was released on 2004 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Field Guide derives from the treatment of geometrical optics that has evolved from both the undergraduate and graduate programs at the Optical Sciences Center at the University of Arizona. The development is both rigorous and complete, and it features a consistent notation and sign convention. This volume covers Gaussian imagery, paraxial optics, first-order optical system design, system examples, illumination, chromatic effects, and an introduction to aberrations. The appendices provide supplemental material on radiometry and photometry, the human eye, and several other topics.
Download or read book Stray Light Analysis and Control written by Eric C. Fest and published by SPIE-International Society for Optical Engineering. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stray light is defined as unwanted light in an optical system, a familiar concept for anyone who has taken a photograph with the sun in or near their camera's field of view. In a low-cost consumer camera, stray light may be only a minor annoyance, but in a space-based telescope, it can result in the loss of data worth millions of dollars. It is imperative that optical system designers understand its consequences on system performance and adapt the design process to control it. This book addresses stray light terminology, radiometry, and the physics of stray light mechanisms, such as surface roughness scatter and ghost reflections. The most-efficient ways of using stray light analysis software packages are included. The book also demonstrates how the basic principles are applied in the design, fabrication, and testing phases of optical system development.
Download or read book Optical Imaging and Aberrations written by Virendra N. Mahajan and published by SPIE-International Society for Optical Engineering. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years have passed since the publication of the first edition of this classic text in April 2001. Considerable new material amounting to 100 pages has been added in this second edition. Each chapter now contains a Summary section at the end. The new material in Chapter 4 consists of a detailed comparison of Gaussian apodization with a corresponding beam, determination of the optimum value of the Gaussian radius relative to that of the pupil to yield maximum focal-point irradiance, detailed discussion of standard deviation, aberration balancing, and Strehl ratio for primary aberrations, derivation of the aberration-free and defocused OTF, discussion of an aberrated beam yielding higher axial irradiance in a certain defocused region than its aberration-free focal-point value, illustration that aberrated PSFs lose the advantage of Gaussian apodizaton in reducing the secondary maxima of a PSF, and a brief description of the characterization of the width of a multimode beam. In Chapter 5, the effect of random longitudinal defocus on a PSF is included. The coherence length of atmospheric turbulence is calculated for looking both up and down through the atmosphere. Also discussed are the angle of arrival of a light wave propagating through turbulence, and lucky imaging where better-quality short-exposure images are selected, aligned, and added to obtain a high-quality image.
Download or read book Modeling the Imaging Chain of Digital Cameras written by Robert D. Fiete and published by SPIE-International Society for Optical Engineering. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process by which an image is formed, processed, and displayed can be conceptualized as a chain of physical events called the imaging chain. By mathematically modeling the imaging chain, we can gain insight into the relationship between the camera design parameters and the resulting image quality. The mathematical models can also be used to optimize and assess the design of a camera for specific applications before expenditures are committed to building hardware. Modeling the Imaging Chain of Digital Cameras teaches the key elements of the end-to-end imaging chain for digital camera systems and describes how elements of the imaging chain are mathematically modeled using the basics of linear systems mathematics and Fourier transforms. The emphasis is on general digital cameras designed to image incoherent light in the visible imaging spectrum. The reader will learn how digital camera design parameters are related to the elements of the imaging chain and how they influence the resulting image quality. The book also discusses the use of imaging chain models to simulate images from different digital camera designs for image quality evaluations.
Download or read book Tissue Optics written by Valery Tuchin and published by . This book was released on 2015 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the biomedical optics classic Tissue Optics covers the continued intensive growth in tissue optics—in particular, the field of tissue diagnostics and imaging—that has occurred since 2007. As in the first two editions, Part I describes fundamentals and basic research, and Part II presents instrumentation and medical applications. However, for the reader’s convenience, this third edition has been reorganized into 14 chapters instead of 9. The chapters covering optical coherence tomography, digital holography and interferometry, controlling optical properties of tissues, nonlinear spectroscopy, and imaging have all been substantially updated. The book is intended for researchers, teachers, and graduate and undergraduate students specializing in the physics of living systems, biomedical optics and biophotonics, laser biophysics, and applications of lasers in biomedicine. It can also be used as a textbook for courses in medical physics, medical engineering, and medical biology.
Download or read book Hyperspectral Remote Sensing written by Michael Theodore Eismann and published by SPIE-International Society for Optical Engineering. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hyperspectral remote sensing is an emerging, multidisciplinary field with diverse applications that builds on the principles of material spectroscopy, radiative transfer, imaging spectrometry, and hyperspectral data processing. While there are many resources that suitably cover these areas individually and focus on specific aspects of the hyperspectral remote sensing field, this book provides a holistic treatment that captures its multidisciplinary nature. The content is oriented toward the physical principles of hyperspectral remote sensing as opposed to applications of hyperspectral technology. Readers can expect to finish the book armed with the required knowledge to understand the immense literature available in this technology area and apply their knowledge to the understanding of material spectral properties, the design of hyperspectral systems, the analysis of hyperspectral imagery, and the application of the technology to specific problems.
Download or read book Optical Scattering written by John C. Stover and published by SPIE-International Society for Optical Engineering. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book concentrated on relating scatter from optically smooth surfaces to the microroughness on those surfaces. After spending six years in the semiconductor industry, Dr. Stover has updated and expanded the third edition. Newly included are scatter models for pits and particles as well as the use of wafer scanners to locate and size isolated surface features. New sections cover the multimillion-dollar wafer scanner business, establishing that microroughness is the noise, not the signal, in these systems. Scatter measurements, now routinely used to determine whether small-surface features are pits or particles and inspiring new technology that provides information on particle material, are also discussed. These new capabilities are now supported by a series of international standards, and a new chapter reviews those documents. New information on scatter from optically rough surfaces has also been added. Once the critical limit is exceeded, scatter cannot be used to determine surface-roughness statistics, but considerable information can still be obtained - especially when measurements are made on mass-produced products. Changes in measurement are covered, and the reader will find examples of scatter measurements made using a camera for a fraction of the cost and in a fraction of the time previously possible. The idea of relating scatter to surface appearance is also discussed, and appearance has its own short chapter. After all, beauty is in the eye of the beholder, and what we see is scattered light.
Download or read book Field Guide to Optical Lithography written by Chris A. Mack and published by Society of Photo Optical. This book was released on 2006 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Field Guide distills the material written by Chris Mack over the past 20 years, including notes from his graduate-level lithography course at the University of Texas at Austin. It details the lithography process, image formation, imaging onto a photoresist, photoresist chemistry, and lithography control and optimization. An introduction to next-generation lithographic technologies is also included, as well as an extensive lithography glossary and a summation of salient equations critical to anyone involved in the lithography industry.
