Download or read book Programming for Electrical Engineers written by James Squire and published by Academic Press. This book was released on 2020-07-08 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming for Electrical Engineers: MATLAB and Spice introduces beginning engineering students to programming in Matlab and Spice through engaged, problem-based learning and dedicated electrical and computer engineering content. The book draws its problems and examples specifically from electrical and computer engineering, covering such topics as circuit analysis, signal processing, and filter design. It teaches relevant computational techniques in the context of solving common problems in electrical and computer engineering, including mesh and nodal analysis, Fourier transforms, and phasor analysis. Programming for Electrical Engineers: MATLAB and Spice is unique among MATLAB textbooks for its dual focus on introductory-level learning and discipline-specific content in electrical and computer engineering. No other textbook on the market currently targets this audience with the same attention to discipline-specific content and engaged learning practices. Although it is primarily an introduction to programming in MATLAB, the book also has a chapter on circuit simulation using Spice, and it includes materials required by ABET Accreditation reviews, such as information on ethics, professional development, and lifelong learning. Discipline-specific: Introduces Electrical and Computer Engineering-specific topics, such as phasor analysis and complex exponentials, that are not covered in generic engineering Matlab texts Accessible: Pedagogically appropriate for freshmen and sophomores with little or no prior programming experience Scaffolded content: Addresses both script and functions but emphasizes the use of functions since scripts with non-scoped variables are less-commonly encountered after introductory courses Problem-centric: Introduces MATLAB commands as needed to solve progressively more complex EE/ECE-specific problems, and includes over 100 embedded, in-chapter questions to check comprehension in stages and support active learning exercises in the classroom Enrichment callouts: "Pro Tip" callouts cover common ABET topics, such as ethics and professional development, and "Digging Deeper" callouts provide optional, more detailed material for interested students

Download or read book SPICE written by Khaled El Emam and published by Wiley-IEEE Computer Society Press. This book was released on 1997-11-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The SPICE (Software Process Improvement and Capability dEtermination) Project is a joint effort by the ISO and IEC to create an international standard for software process assessment. This book covers both the theory of SPICE and its practical applications, including the lessons learned from the SPICE trials. It includes a valuable automated tool on CD-ROM to help you apply the concepts presented in the book. The text shows the evolution of the most recent developments in the SPICE project. It documents the major products and the empirical evaluations that have been conducted thus far. The book is jointly written by the key experts involved in the SPICE project. The theory chapters describe the rationale behind the architecture and the contents of the V1.0 and V2.0 document set and how to interpret them. The remaining chapters describe the applications and how that make use of the theory behind them.

Download or read book Electronic Circuit Simulation Computer Program SPICE written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SPICE for Power Electronics and Electric Power written by Muhammad H. Rashid and published by CRC Press. This book was released on 2005-11-02 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: To be accredited, a power electronics course should cover a significant amount of design content and include extensive use of computer-aided analysis with simulation tools such as SPICE. Based upon the authors' experience in designing such courses, SPICE for Power Electronics and Electric Power, Second Edition integrates a SPICE simulator with a po

Download or read book Electronic Circuit Simulation Computer Program SPICE written by and published by . This book was released on 1986 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Parallel Sparse Direct Solver for Integrated Circuit Simulation written by Xiaoming Chen and published by Springer. This book was released on 2017-02-11 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes algorithmic methods and parallelization techniques to design a parallel sparse direct solver which is specifically targeted at integrated circuit simulation problems. The authors describe a complete flow and detailed parallel algorithms of the sparse direct solver. They also show how to improve the performance by simple but effective numerical techniques. The sparse direct solver techniques described can be applied to any SPICE-like integrated circuit simulator and have been proven to be high-performance in actual circuit simulation. Readers will benefit from the state-of-the-art parallel integrated circuit simulation techniques described in this book, especially the latest parallel sparse matrix solution techniques.

Download or read book The LTSpice IV Simulator written by Gilles Brocard and published by . This book was released on 2013 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book FET Modeling for Circuit Simulation written by Dileep A. Divekar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuit simulation is widely used for the design of circuits, both discrete and integrated. Device modeling is an impor tant aspect of circuit simulation since it is the link between the physical device and the sim ulate d device. Curren tly available circuit simulation programs provide a variety of built-in models. Many circuit designers use these built-in models whereas some incorporate new models in the circuit sim ulation programs. Understanding device modeling with particular emphasis on circuit simulation will be helpful in utilizing the built-in models more efficiently as well as in implementing new models. SPICE is used as a vehicle since it is the most widely used circuit sim ulation program. How ever, some issues are addressed which are not directly appli cable to SPICE but are applicable to circuit simulation in general. These discussions are useful for modifying SPICE and for understanding other simulation programs. The gen eric version 2G. 6 is used as a reference for SPICE, although numerous different versions exist with different modifications. This book describes field effect transistor models commonly used in a variety of circuit sim ulation pro grams. Understanding of the basic device physics and some familiarity with device modeling is assumed. Derivation of the model equations is not included. ( SPICE is a circuit sim ulation program available from EECS Industrial Support Office, 461 Cory Hall, University of Cali fornia, Berkeley, CA 94720. ) Acknowledgements I wish to express my gratitude to Valid Logic Systems, Inc.

Download or read book Circuit Simulation written by Farid N. Najm and published by John Wiley & Sons. This book was released on 2010-02-03 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: A DEFINITIVE TEXT ON DEVELOPING CIRCUIT SIMULATORS Circuit Simulation gives a clear description of the numerical techniques and algorithms that are part of modern circuit simulators, with a focus on the most commonly used simulation modes: DC analysis and transient analysis. Tested in a graduate course on circuit simulation at the University of Toronto, this unique text provides the reader with sufficient detail and mathematical rigor to write his/her own basic circuit simulator. There is detailed coverage throughout of the mathematical and numerical techniques that are the basis for the various simulation topics, which facilitates a complete understanding of practical simulation techniques. In addition, Circuit Simulation: Explores a number of modern techniques from numerical analysis that are not synthesized anywhere else Covers network equation formulation in detail, with an emphasis on modified nodal analysis Gives a comprehensive treatment of the most relevant aspects of linear and nonlinear system solution techniques States all theorems without proof in order to maintain the focus on the end-goal of providing coverage of practical simulation methods Provides ample references for further study Enables newcomers to circuit simulation to understand the material in a concrete and holistic manner With problem sets and computer projects at the end of every chapter, Circuit Simulation is ideally suited for a graduate course on this topic. It is also a practical reference for design engineers and computer-aided design practitioners, as well as researchers and developers in both industry and academia.

Download or read book SPICE2 written by Laurence W. Nagel and published by . This book was released on 1975 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Electronic Circuits written by Stanley G. Burns and published by CL-Engineering. This book was released on 1997 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying CD-ROM includes Evaluation version of PSPICE, SPICE netlists, Electronic Workbench circuit models and Acrobat transparencies.

Download or read book Introduction to Device Modeling and Circuit Simulation written by Tor A. Fjeldly and published by Wiley-Interscience. This book was released on 1998 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a useful reference for practicing electrical engineers as well as a textbook for a junior/senior or graduate level course in electrical engineering. The authors combine two subjects: device modeling and circuit simulation - by providing a large number of well-prepared examples of circuit simulations immediately following the description of many device models.

Download or read book The SPICE Book written by Andrei Vladimirescu and published by John Wiley & Sons. This book was released on 1994 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book, written by Andre Vladimirescu, who was instrumental in the development of SPICE at the University of California Berkeley, introduces computer simulation of electrical and electronics circuits based on the SPICE standard. Relying on the functionality first supported in SPICE2 that is now supported in all SPICE programs, this text is addressed to all users of electrical simulation. The approach to learning circuit simulation is to interpret simulation results in relation to electrical engineering fundamentals; the book asks the student to solve most circuit examples by hand before verifying the results with SPICE. Addressed to both the SPICE novice and the experienced user, the first six chapters provide the relevant information on SPICE functionality for the analysis of linear as well as nonlinear circuits. Each of these chapters starts out with a linear example accessible to any new user of SPICE and proceeds with nonlinear transistor circuits. The latter part of the book goes into more detail on such issues as functional and hierarchical models, distortion analysis, basic algorithms in SPICE and related options parameters, and, how to direct SPICE to find a solution when it does not converge to a solution. The approach emphasizes that SPICE is not a substitute for knowledge of circuit operation but a complement. The SPICE Book is different from previously published books in the approach of solving circuit problems with a computer. The solution to most circuit examples is sketched out by hand first and followed by a SPICE verification. For more complex circuits it is not feasible to find the solution by hand but the approach stresses the need for the SPICE user tounderstand the results. Readers gain a better comprehension of SPICE thanks to the importance placed on the relation between EE fundamentals and computer simulation. The tutorial approach advances from the hand solution of a circuit to SPICE verification and simulation results interpretation. This book teaches the approach to electrical circuit simulation rather than a specific simulation program. Examples are simulated alternatively with SPICE2, SPICE3 or PSPICE. Accurate descriptions, simulation rationale and cogent explanations make this an invaluable reference.

Download or read book Spice written by Sedra Roberts and published by New York : Oxford University Press. This book was released on 1997 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many cases, new designers of electronic circuits blindly search for ways to improve the design itself using a brute-force, hit-and-miss approach. The intention of this book is to avoid this pitfall by teaching readers what not to do with SPICE. This is accomplished by keying each example in this text to those presented in Sedra and Smith's Microelectronic Circuits 3/E, where a complete hand analysis is provided.

Download or read book Semiconductor Device Modeling with Spice written by Giuseppe Massabrio and published by McGraw Hill Professional. This book was released on 1998-12-22 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.

Download or read book Electronic Circuit Simulation Computer Program written by Information Services for the Physics and Engineering Communities and published by . This book was released on 1990* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SPICE for Circuits and Electronics Using PSpice written by M. H. Rashid and published by . This book was released on 1995 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuit descriptions - DC circuit analysis - Transient analysis - Ac circuit analysis - Advanced spice commands and analysis - Semiconductor diodes - Bipolar junction transistors - Field-effect transistors - Op-amp circuits - Digital logia circuits - Difficulties - Appendices : A running PSpice on PCs - Noise analysis - Nonlinear magnetic model.