Download or read book Preparation of Catalysts IV written by G. Poncelet and published by Elsevier. This book was released on 1987-05-01 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the IVth International Symposium on the ``Scientific Bases for the Preparation of Heterogeneous Catalysts'', are presented in this volume. Since its start in 1975, this series of Symposia has continued to attract increasing scientific attention. An appreciable proportion of the papers presented at this Fourth Symposium stemmed from industrial research laboratories. The symposium dealt with catalysts for selective oxidation, hydrodesulphurization, Fischer-Tropsch catalysis, methanol synthesis, metal supported catalysts and new trends in catalyst preparation.

Download or read book Hydrotreating Catalysts written by R.G. Anthony and published by Elsevier. This book was released on 1989-08-28 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides much information of interest to anyone working in the petroleum industry or studying catalyst preparation and characterization in industrial or university laboratories. It contains both review articles and papers reporting progress concerning hydrotreating catalysts which together provide an up-to-date picture of this interesting field. The use of modern spectroscopic techniques in catalyst characterization is described and new concepts such as microbial upgrading and the use of crystallography data in catalyst design are presented.

Download or read book Advances in Catalysis written by and published by Academic Press. This book was released on 1975-04-25 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Catalysis

Download or read book Adsorption and Catalysis on Oxide Surfaces written by M. Che and published by Elsevier. This book was released on 1985-07-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium was held to honour the memory of the late Dr. A.J. Tench who made numerous important contributions to our knowledge of the structure, reactivity and adsorption properties of oxide surfaces. This volume contains an up-to-date picture of adsorption and catalysis on oxide surfaces, not in the form of a comprehensive review but in its living aspects of work in progress. It describes detailed studies on the determination of the coordination surface ions, particularly oxide ions, by photoluminescence and reflectance spectroscopy, on the identification of adsorbed species by magnetic optical or surface techniques and on catalysis, with emphasis on new concepts such as catalysis involving excited states or structure sensitive reactions.Professionals working in the industrial and academic laboratories will find the book particularly useful as it provides a state-of-the-art account of our understanding of the structure and adsorption characteristics of oxide surfaces. Contained in the book are first class research papers by leading exponents in this field. A very important issue is that the book highlights for the first time the importance of excited states and structure sensitivity in determining the behaviour of oxide surfaces.

Download or read book Combinatorial and High Throughput Discovery and Optimization of Catalysts and Materials written by Radislav A. Potyrailo and published by CRC Press. This book was released on 2006-07-19 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of parallel synthesis and high-throughput characterization tools offer scientists a time-efficient and cost-effective solution for accelerating traditional synthesis processes and developing the structure-property relationships of multiple materials under variable conditions. Written by renowned contributors to the field, Combina

Download or read book Catalysts in Petroleum Refining and Petrochemical Industries 1995 written by M. Absi-Halabi and published by Elsevier. This book was released on 1996-01-15 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis plays an increasingly critical role in modern petroleum refining and basic petrochemical industries as market demands for and specifications of petroleum and petrochemical products are continuously changing. As we enter the 21st century, new challenges for catalysis science and technology are anticipated in almost every field. Particularly, better utilization of petroleum resources and demands for cleaner transportation fuels are major items. It was against this background that the 2nd International Conference on Catalysts in Petroleum Refining and Petrochemical Industries was organized. The conference was attended by around 300 specialists in the catalysis field from both academia and industry from over 30 countries. It provided a forum for the exchange of ideas between scientists and engineers from the region with their counterparts from industrialized countries.The papers from the conference, which were carefully selected from around 100 submissions, were refereed in terms of scientific and technical content and format in accordance with internationally accepted standards. They comprise a mix of reviews providing an overview of selected areas, original fundamental research results, and industrial experiences.

Download or read book Preparation of Catalysts V written by B. Delmon and published by Elsevier. This book was released on 1991-06-03 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: The organizers of this Fifth Symposium maintained their initial objectives, namely to gather experts from both industries and universities to discuss the scientific problems involved in the preparation of heterogeneous catalysts, and to encourage as much as possible the presentation of research work on catalysts of real industrial significance. Another highlight of these symposia was to reserve a substantial part of the program to new developments in catalyst preparation, new preparation methods and new catalytic systems. The fact that chemical reactions which were hardly conceivable some years ago have become possible today through the development of appropriate catalytic systems proves that catalysis is in constant progress.The papers in this volume deal with studies of unit operations in catalyst preparation, catalyst preparation via the sol-gel route, preparation of catalysts from layered structures and pillaring of clays, preparation and modification of zeolite-based catalysts, carbon supported catalysts, preparation of oxidation catalysts and novel and unusual preparation methods.

Download or read book New Frontiers in Catalysis Parts A C written by L. Guczi and published by Elsevier. This book was released on 1993-04-20 with total page 2955 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes comprise the proceedings of the major international meeting on catalysis which is held at 4 year intervals. The programme focussed on New Frontiers in Catalysis including nontraditional catalytic materials and environmental catalysis. The contributions cover a wide range of fundamental, applied, industrial and engineering aspects of catalysis. The extensive range of highly efficient industrial techniques for observing and characterizing catalytically important surfaces is evident.The programme covered the following sessions: Mechanism, theory, in situ methods; Catalytic reaction on atomically clean surfaces; Catalytic reaction on zeolites and related substances; New methods and principles for catalyst preparation; Hydrotreatment reactions (HDS, HDN); Characterization of catalysts, application of novel techniques; Selective oxidation; New catalytic aspects of heteropoly acids and related compounds; Reaction of hydrocarbons; Nontraditional catalytic materials; Fuel upgrading; Alkane activation; Acid-base catalysis; New selective catalytic reactons, fine chemicals; Environmental catalysis; Industrial catalysis, deactivation, reactivation; Synthesis from syngas; Electrocatalysis; Photocatalysis.The invited lectures and 433 papers included in these volumes present an update on all areas of catalysis and applications.

Download or read book New Developments in Selective Oxidation by Heterogeneous Catalysis written by P. Ruiz and published by Elsevier. This book was released on 1992-02-06 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains invited papers and communications presented at the Third European Workshop Meeting on Selective Oxidation by Heterogeneous Catalysis. The purpose of the meeting was to present recent results and to discuss new aspects of partial oxidation by heterogeneous catalysis. The following topics were discussed: Novel processes for obtaining new fine chemicals by catalytic partial oxidation; selective oxidation and oxidative dehydrogenation of alkanes; new catalysts and advances in preparation methods of oxidation catalysts; new phenomena in partial oxidation and new aspects of surface chemistry in oxide catalysts; new applications of physicochemical methods for characterization of oxide catalysts; oxidation with other agents than oxygen and catalytic oxidation of carbohydrates. This book will provide a valuable set of data on reactions of selective oxidation which will be extremely useful to catalyst and related practitioners, whether fundamentalists or highly applied, and to process engineers who wish to evaluate current findings in this field. The wide-range approach to reactions of selective oxidation will disseminate knowledge in specialized areas of selective oxidation and encourage innovation and creativity.

Download or read book Solid Catalysts for the Upgrading of Renewable Sources written by Nicoletta Ravasio and published by MDPI. This book was released on 2019-03-26 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of solid catalysts for the upgrade of renewable sources gives the opportunity to combine the two main cores of green chemistry, that is, on the one hand, the set-up of sustainable processes and, on the other, the use of biomass-derived materials. Solid catalysts have taken on a leading role in traditional petrochemical processes and could represent a key tool in new biorefinery-driven technologies. This book will cover topics related to the preparation and use of heterogeneous catalytic systems for the transformation of renewable sources, as well as of materials deriving from agro-industrial wastes and by-products. At the same time, the ever-increasing importance of bioproducts, due to the acceptance and request of consumers, makes the upgrade of biomass into chemicals and materials not only an environmental issue, but also an economical advantage.

Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.

Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing challenge for chemical industry and research institutions to find cost-efficient and environmentally sound methods of converting natural resources into fuels chemicals and energy. Catalysts are essential to these processes and the Catalysis Specialist Periodical Report series serves to highlight major developments in this area. This series provides systematic and detailed reviews of topics of interest to scientists and engineers in the catalysis field. The coverage includes all major areas of heterogeneous and homogeneous catalysis and also specific applications of catalysis such as NOx control kinetics and experimental techniques such as microcalorimetry. Each chapter is compiled by recognised experts within their specialist fields and provides a summary of the current literature. This series will be of interest to all those in academia and industry who need an up-to-date critical analysis and summary of catalysis research and applications. Catalysis will be of interest to anyone working in academia and industry that needs an up-to-date critical analysis and summary of catalysis research and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr

Download or read book Catalysis in Application written by D Lennon and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although catalysts are responsible for the manufacture and processing of a number of products in daily use, the subject of catalysis is still very much in its infancy, and the complexity of the processes still present major challenges. Catalysis in Application presents a snapshot of the most up-to-date developments in the field of applied catalysis. Coverage is principally in the areas of hydrogenation, dehydrogenation, chiral catalysis, environmental catalysis and catalyst deactivation, combining a unique mix of chemistry and chemical engineering. With its wide-ranging coverage, this book will be a welcome addition to the shelves of every practitioner in catalysis, both in industry and academia.

Download or read book Zeolites as Catalysts Sorbents and Detergent Builders written by H.G. Karge and published by Elsevier. This book was released on 1989-05-01 with total page 897 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book will be welcomed by companies involved in catalysis and catalyst manufacturing, sorbent and detergent production, chemical and petroleum refining, and by research scientists in academia. It contains 76 original contributions of recent work on fundamental and technological aspects of zeolite research and application. Particular attention is paid to novel developments in zeolite catalysis, sorption on zeolites and use of zeolites as detergent builders. Problems of zeolite synthesis, structure, modification, ion exchange, diffusion and novel applications are also dealt with. Topics which are the subject of much current interest are also treated, e.g. new catalytic applications of zeolites in the synthesis of fine chemicals, novel formulations of detergent builders and industrially developed zeolite-based separation processes. The application of zeolites is also discussed from both economic and ecological points of view. The contributions cover a wide range of materials and results which are organised, to a large extent, in tables and figures and are identified by appropriate keywords.The meeting at which these contributions were presented was the latest in a series of smaller, more specialized zeolite meetings which are held in between the large International Zeolite Conferences. Participating in the symposium were experts from both industry and academia who gave invited lectures, oral and poster presentations. The resulting book provides a large body of helpful information for present and future work and development in zeolite research and applications.

Download or read book Preparation of Catalysts VI written by G. Poncelet and published by Elsevier. This book was released on 1995-03-24 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The organizers of this Sixth Symposium maintained their initial objectives, namely to gather experts from both industries and universities to discuss the scientific problems involved in the preparation of heterogeneous catalysts, and to encourage as much as possible the presentation of research work on catalysts of real industrial significance. Another highlight of these symposia is to reserve a substantial part of the program to new developments in catalyst preparation, new preparation methods and new catalytic systems. The fact that chemical reactions which were hardly conceivable some years ago have become possible today through the development of appropriate catalytic systems proves that catalysis is in constant progress.The papers in this volume deal with preparation of new catalysts and supports, catalyst preparation via sol-gel methods, supported catalysts and synthesis of nanometer size catalysts.

Download or read book Advances in Refining Catalysis written by Deniz Uner and published by CRC Press. This book was released on 2017-03-16 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet changing market demands that have stringent emission standards and to ensure proper performance in refinery units, evaluation of novel catalyst designs and results from material characterization and testing of catalysts are of crucial importance for refiners as well as for catalyst manufacturers. This book highlights recent developments in the application of refinery catalysts in selected units such as fluid catalytic cracking (FCC), hydrogen production for hydroprocessing units, hydrotreating, hydrocracking, and sustainable processing of biomass into biofuels.

Download or read book Innovative Catalysis in Organic Synthesis written by Pher G. Andersson and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: C-H, C-O, C-C, and C-Heteroatom bond forming processes by using metal-ligand approaches for the synthesis of organic compounds of biological, pharmacological and organic nanotechnological utility are the key areas addressed in this book. Authored by a European team of leaders in the field, it brings together innovative approaches for a variety of catalysis reactions and processes frequently applied in organic synthesis into a handy reference work. It covers all major types of catalysis, including homogeneous, heterogeneous, and organocatalysis, as well as mechanistic and computational studies. Special attention is paid to the improvements in efficiency and sustainability of important catalytic processes, such as selective oxidations, hydrogenation, and cross-coupling reactions, and to their utilization in industry. The result is a valuable resource for advanced researchers in both academia and industry, as well as graduate students in organic chemistry aiming for chemo-, regio- or stereoselective synthesis of organic compounds by using novel catalytic systems.