Download or read book Ceramics Science and Technology Volume 4 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2013-08-05 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, and aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will fi nd this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.
Download or read book Electron Paramagnetic Resonance in Modern Carbon Based Nanomaterials written by Dariya Savchenko and published by Bentham Science Publishers. This book was released on 2018-06-05 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents information about several topics in the field of electron paramagnetic resonance (EPR) study of carbon-containing nanomaterials. It introduces the reader to an array of experimental and theoretical approaches for the analysis of paramagnetic centers (dangling bonds, interface defects, vacancies, and impurities) usually observed in modern carbon-containing materials such as nanographites, graphene, disordered onion-like carbon nanospheres (DOLCNS), single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNT), graphene oxide (GO), reduced graphene oxide (rGO), nanodiamonds, silicon carbonitride (SiCN) and silicon carbide (SiC) based composites and thin films. In particular, the book describes in detail: • The fundamentals of EPR spectroscopy and its application to the carbon-containing materials; • The resolution of the EPR signals from different species in carbon materials; • EPR characterization of spin dynamics in carbon nanomaterials; • Magnetic properties of DWCNTs and MWCNTs polymer composites; • EPR investigations on GO, rGO and CNTs with different chemical functionalities; • EPR spectroscopy of semiconducting SWCNTs thin films and their transistors; • In-situ EPR investigations of the oxygenation processes in coal and graphene materials; • The two-temperature EPR measurement method applied to carbonaceous solids; • Characterization of impurities in nanodiamonds and SiC nanomaterials and related size effects by CW and pulse EPR techniques; • Application of multifrequency EPR to the study of paramagnetic defects in a-Si1-xCx:H thin films and a-SiCxNy based composites. This volume is a useful guide for researchers interested in the EPR study of paramagnetic centers in the carbon-containing thin films, nanomaterials, ceramics, etc. It is also a valuable teaching tool at graduate and postgraduate levels for advanced courses in analytical chemistry, applied sciences and spectroscopy.
Download or read book Ceramics Science and Technology Volume 3 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2011-12-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, or aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will find this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Advanced Ceramics written by Shigeyuki Somiya and published by Academic Press. This book was released on 2003-09-17 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: A two-volume reference set for all ceramicists, both in research and working in industry The only definitive reference covering the entire field of advanced ceramics from fundamental science and processing to application Contributions from over 50 leading researchers from around the world This new Handbook will be an essential resource for ceramicists. It includes contributions from leading researchers around the world, and includes sections on: Basic Science of Advanced Ceramic, Functional Ceramics (electro-ceramics and optoelectro-ceramics) and engineering ceramics.Contributions from over 50 leading researchers from around the world
Download or read book Surfaces and Interfaces for Biomaterials written by Pankaj Vadgama and published by CRC Press. This book was released on 2005-06-14 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such problems as rejection, the interface between an implant and its human host is a critical area in biomaterials. Surfaces and Interfaces for Biomaterials summarizes the wealth of research on understanding the surface properties of biomaterials and the way they interact with human tissue. The first part of the book reviews the way biomaterial surfaces form. Part Two then discusses ways of monitoring and characterizing surface structure and behavior. The final two parts of the book look at a range of in vitro and in vivo studies of the complex interactions between biomaterials and the body. Chapters cover such topics as bone and tissue regeneration, the role of interface interactions in biodegradable biomaterials, microbial biofilm formation, vascular tissue engineering and ways of modifying biomaterial surfaces to improve biocompatibility. Surfaces and Interfaces for Biomaterials will be a standard work on how to understand and control surface processes in ensuring biomaterials are used successfully in medicine.
Download or read book Ceramics Science and Technology Volume 1 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2008-03-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, or aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will find this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1985 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1986 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1986 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1985 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impedance Spectroscopy written by Evgenij Barsoukov and published by John Wiley & Sons. This book was released on 2018-03-19 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Essential Reference for the Field, Featuring Protocols, Analysis, Fundamentals, and the Latest Advances Impedance Spectroscopy: Theory, Experiment, and Applications provides a comprehensive reference for graduate students, researchers, and engineers working in electrochemistry, physical chemistry, and physics. Covering both fundamentals concepts and practical applications, this unique reference provides a level of understanding that allows immediate use of impedance spectroscopy methods. Step-by-step experiment protocols with analysis guidance lend immediate relevance to general principles, while extensive figures and equations aid in the understanding of complex concepts. Detailed discussion includes the best measurement methods and identifying sources of error, and theoretical considerations for modeling, equivalent circuits, and equations in the complex domain are provided for most subjects under investigation. Written by a team of expert contributors, this book provides a clear understanding of impedance spectroscopy in general as well as the essential skills needed to use it in specific applications. Extensively updated to reflect the field’s latest advances, this new Third Edition: Incorporates the latest research, and provides coverage of new areas in which impedance spectroscopy is gaining importance Discusses the application of impedance spectroscopy to viscoelastic rubbery materials and biological systems Explores impedance spectroscopy applications in electrochemistry, semiconductors, solid electrolytes, corrosion, solid state devices, and electrochemical power sources Examines both the theoretical and practical aspects, and discusses when impedance spectroscopy is and is not the appropriate solution to an analysis problem Researchers and engineers will find value in the immediate practicality, while students will appreciate the hands-on approach to impedance spectroscopy methods. Retaining the reputation it has gained over years as a primary reference, Impedance Spectroscopy: Theory, Experiment, and Applications once again present a comprehensive reference reflecting the current state of the field.
Download or read book Introduction to Nanofiber Materials written by Frank K. Ko and published by Cambridge University Press. This book was released on 2014-07-31 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the latest coverage of the fundamentals and applications of nanofibrous materials and their structures for graduate students and researchers, this book bridges the communication gap between fiber technologists and materials scientists and engineers. Featuring intensive coverage of electroactive, bioactive and structural nanofibers, it provides a comprehensive collection of processing conditions for electrospinning and includes recent advances in nanoparticle-/nanotube-based nanofibers. The book also covers mechanical properties of fibers and fibrous assemblies, as well as characterization methods.
Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1986 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mass Spectrometry Handbook written by Mike S. Lee and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 1362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its enormous sensitivity and ease of use, mass spectrometry has grown into the analytical tool of choice in most industries and areas of research. This unique reference provides an extensive library of methods used in mass spectrometry, covering applications of mass spectrometry in fields as diverse as drug discovery, environmental science, forensic science, clinical analysis, polymers, oil composition, doping, cellular research, semiconductor, ceramics, metals and alloys, and homeland security. The book provides the reader with a protocol for the technique described (including sampling methods) and explains why to use a particular method and not others. Essential for MS specialists working in industrial, environmental, and clinical fields.
