Download or read book Metallographic Specimen Preparation written by J. McCall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: /.letallography is much more than taking striking pictures at high magnifications or polishing and etching specimens in such a way that no scratches can be seen. Basically, metallography is the physical metallurgist's most useful and most used tool for studying metals. Although it is perhaps his oldest tool, it certainly is not likely to become obsolete. Rather, the continued demands that have been placed upon materials have required more detailed charac terizations of their microstructures and this, in turn, has re quired the metallographer to develop new techniques to make these characterizations. Not too many years ago, the metallographer had only optical microscopes with which to examine his specimens. Now he has elec tron microscopes, scanning electron microscopes, and a whole host of instruments which were unknown to him only a relatively few years ago. This has forced him to learn not only how to use these new instruments and how to interpret the information that they provide but it also has made him develop new techniques for preparing the samples for examination.
Download or read book Specimen Preparation for Electron Metallography written by Ian Sydney Brammar and published by . This book was released on 1966 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the beginner and the experienced worker.
Download or read book Metallographic Specimen Preparation written by James L. McCall and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sample Preparation Handbook for Transmission Electron Microscopy written by Jeanne Ayache and published by Springer Science & Business Media. This book was released on 2010-07-03 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful transmission electron microscopy in all of its manifestations depends on the quality of the specimens examined. Biological specimen preparation protocols have usually been more rigorous and time consuming than those in the physical sciences. For this reason, there has been a wealth of scienti?c literature detailing speci?c preparation steps and numerous excellent books on the preparation of b- logical thin specimens. This does not mean to imply that physical science specimen preparation is trivial. For the most part, most physical science thin specimen pre- ration protocols can be executed in a matter of a few hours using straightforward steps. Over the years, there has been a steady stream of papers written on various aspects of preparing thin specimens from bulk materials. However, aside from s- eral seminal textbooks and a series of book compilations produced by the Material Research Society in the 1990s, no recent comprehensive books on thin spe- men preparation have appeared until this present work, ?rst in French and now in English. Everyone knows that the data needed to solve a problem quickly are more imp- tant than ever. A modern TEM laboratory with supporting SEMs, light microscopes, analytical spectrometers, computers, and specimen preparation equipment is an investment of several million US dollars. Fifty years ago, electropolishing, chemical polishing, and replication methods were the principal specimen preparation me- ods.
Download or read book Sample Preparation Handbook for Transmission Electron Microscopy written by Jeanne Ayache and published by Springer Science & Business Media. This book was released on 2010-06-08 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful transmission electron microscopy in all of its manifestations depends on the quality of the specimens examined. Biological specimen preparation protocols have usually been more rigorous and time consuming than those in the physical sciences. For this reason, there has been a wealth of scienti c literature detailing speci c preparation steps and numerous excellent books on the preparation of b- logical thin specimens. This does not mean to imply that physical science specimen preparation is trivial. For the most part, most physical science thin specimen pre- ration protocols can be executed in a matter of a few hours using straightforward steps. Over the years, there has been a steady stream of papers written on various aspects of preparing thin specimens from bulk materials. However, aside from s- eral seminal textbooks and a series of book compilations produced by the Material Research Society in the 1990s, no recent comprehensive books on thin specimen preparation have appeared until this present work, rst in French and now in English. Everyone knows that the data needed to solve a problem quickly are more imp- tant than ever. A modern TEM laboratory with supporting SEMs, light microscopes, analytical spectrometers, computers, and specimen preparation equipment is an investment of several million US dollars. Fifty years ago, electropolishing, chemical polishing, and replication methods were the principal specimen preparation me- ods.
Download or read book Specimen Preparation for Transmission Electron Microscopy of Materials written by PJ Goodhew and published by Garland Science. This book was released on 2020-11-25 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the essential practical steps which must precede microscopy. Methods for preparing sheet or disc specimens and final thinning techniques are described with reference to practical problems. The book also covers methods for mounting specimens in the
Download or read book Specimen Preparation for Electron Metallography Etc written by Ian Sydney BRAMMER (and DEWEY (Michael Albert Pike)) and published by . This book was released on 1966 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electron Microscopic Specimen Preparation and Image Interpretation written by Ursula E. Wolff and published by . This book was released on 1964 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specimen Preparation For Electron Metallography written by I.S. Brammar and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Metallography written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Metallography focuses on the defects in the properties of metals, such as precipitates, cracks, grain boundaries, dislocations, stacking faults, and impurity atoms. The publication first offers information on reflected light microscopy and high temperature microscopy. Discussions focus on specimen preparation, defects of lenses, methods of increasing the resolving power of an objective, long working distance objectives, and typical hot-stage experiments. The text then elaborates on surface topography and polarizing microscope, including oblique illumination, interferometry, examination of anisotropic surfaces, and other uses of polarized light microscopy. The text takes a look at X-ray metallography and specialized X-ray diffraction techniques. Topics include Laue method and orientation, structure factor, powder method and the accurate measurement of lattice parameters, Bragg law, sheet textures, and preferred orientation. The publication further elaborates on electron microscopy and metallography at the atomic level. The manuscript is a valuable reference for students and readers interested in modern metallography.
Download or read book Electron Microscope Specimen Preparation Techniques in Materials Science written by K. C. Thompson-Russell and published by . This book was released on 1977 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specimen Preparation for Transmission Electron Microscopy of Materials IV written by Ron M. Anderson and published by . This book was released on 1997 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful transmission electron microscopy (TEM) experimentation depends on many things, one being specimen preparation. Whereas TEM samples of bulk metallic or ceramic materials can be prepared in a straightforward manner, the need to examine nonbulk and/or other classes of materials creates a need for more specialized preparation methods. This book from MRS, the fourth in a successful series, pioneers novel methods or ways of characterizing the specimen preparation process. Contributions to the book are tutorial in nature, and therefore somewhat longer than usual. Papers cover both general and materials-specific specimen preparation methods. Metallic, polymer, plastic, semiconducting, ceramic and magnetic materials as found in bulk, thin-film, dispersed and powdered forms are discussed.
Download or read book Biological Specimen Preparation for Transmission Electron Microscopy written by Audrey M. Glauert and published by Princeton University Press. This book was released on 2014-07-14 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains all the necessary information and advice for anyone wishing to obtain electron micrographs showing the most accurate ultrastructural detail in thin sections of any type of biological specimen. The guidelines for the choice of preparative methods are based on an extensive survey of current laboratory practice. For the first time, in a textbook of this kind, the molecular events occurring during fixation and embedding are analysed in detail. The reasons for choosing particular specimen preparation methods are explained and guidance is given on how to modify established techniques to suit individual requirements. All the practical methods advocated are clearly described, with accompanying tables and the results obtainable are illustrated with many electron micrographs. Portland Press Series: Practical Methods in Electron Microscopy, Volume 17, Audrey M. Glauert, Editor Originally published in 1999. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Specimen Preparation for Transmission Electron Microscopy of Materials written by Peter J. Goodhew and published by Garland Science. This book was released on 1984 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the essential practical steps which must precede microscopy. Methods for preparing sheet or disc specimens and final thinning techniques are described with reference to practical problems. The book also covers methods for mounting specimens in the
Download or read book Handbook of Sample Preparation for Scanning Electron Microscopy and X Ray Microanalysis written by Patrick Echlin and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning electr on microscopy (SEM) and x-ray microanalysis can produce magnified images and in situ chemical information from virtually any type of specimen. The two instruments generally operate in a high vacuum and a very dry environment in order to produce the high energy beam of electrons needed for imaging and analysis. With a few notable exceptions, most specimens destined for study in the SEM are poor conductors and composed of beam sensitive light elements containing variable amounts of water. In the SEM, the imaging system depends on the specimen being sufficiently electrically conductive to ensure that the bulk of the incoming electrons go to ground. The formation of the image depends on collecting the different signals that are scattered as a consequence of the high energy beam interacting with the sample. Backscattered electrons and secondary electrons are generated within the primary beam-sample interactive volume and are the two principal signals used to form images. The backscattered electron coefficient ( ? ) increases with increasing atomic number of the specimen, whereas the secondary electron coefficient ( ? ) is relatively insensitive to atomic number. This fundamental diff- ence in the two signals can have an important effect on the way samples may need to be prepared. The analytical system depends on collecting the x-ray photons that are generated within the sample as a consequence of interaction with the same high energy beam of primary electrons used to produce images.
Download or read book Applied Metallography written by Georgee F. Vander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book should be of interest to practising engineers in metallurgy and materials science, mechanical engineers, chemical engineers involved with corrosion and inorganic chemistry, industry engineers in the steel and metal alloy business.
Download or read book Manual on Electron Metallography Techniques written by ASTM AUTOR and published by ASTM International. This book was released on 1973 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
