Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.
Download or read book Geotechnical Site Characterization written by Paul W. Mayne and published by Taylor & Francis. This book was released on 1998 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Site Investigation written by CR Clayton and published by Wiley-Blackwell. This book was released on 1995-09-06 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site investigation is the crucial first step in design and construction, when the cost and practicality of a project are evaluated. It is also a necessary part of the investigation of building failures. This major reference work describes the organization of site investigation, the plant, sampling equipment and interpretation of results. The second edition includes new material on specification and procurement, desk studies on geophysics, sample disturbance and sampling methods, in-situ testing and laboratory testing.
Download or read book The Deep Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2013-02-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Download or read book Sampler s Guide to the Contract Laboratory Program written by and published by . This book was released on 1991 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Design of Shallow and Deep Foundations written by Lymon C. Reese and published by John Wiley & Sons. This book was released on 2005-11-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-of-a-kind coverage on the fundamentals of foundation analysis and design Analysis and Design of Shallow and Deep Foundations is a significant new resource to the engineering principles used in the analysis and design of both shallow and deep, load-bearing foundations for a variety of building and structural types. Its unique presentation focuses on new developments in computer-aided analysis and soil-structure interaction, including foundations as deformable bodies. Written by the world's leading foundation engineers, Analysis and Design of Shallow and Deep Foundations covers everything from soil investigations and loading analysis to major types of foundations and construction methods. It also features: * Coverage on computer-assisted analytical methods, balanced with standard methods such as site visits and the role of engineering geology * Methods for computing the capacity and settlement of both shallow and deep foundations * Field-testing methods and sample case studies, including projects where foundations have failed, supported with analyses of the failure * CD-ROM containing demonstration versions of analytical geotechnical software from Ensoft, Inc. tailored for use by students in the classroom
Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.
Download or read book Port Designer s Handbook written by Carl A. Thoresen and published by Thomas Telford. This book was released on 2003 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past twenty years there has been considerable improvement and new information in the design of port and berth structures. This handbook reflects the lastest progress and developments in navigation safety, port planning and site selection, layout of container, oil and gas terminals, cargo handling, berth design and construction, fender and mooring principles. It presents guidelines and recommendations for the main items and assumptions in the layout, desing and construction of modern port structures, and the forces and loadings acting on them. The book provides an evaluation of different designs and construction methods for port and berth structures, and recommendations given by the different international harbour standards and recommendations. Practising harbour and port engineers and students will find the handbook an invaluable source of information.
Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Download or read book Soils and Foundations written by Cheng Liu and published by . This book was released on 2004 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This introductory text offers a practical approach to soil mechanics and foundations, with application to real-world design solutions for civil technology and engineering. This material is presented in a clear, direct style with just enough mathematics to support the design concepts. Several new illustrations have been added to enhance student comprehension."--BOOK JACKET.
Download or read book Pile Design and Construction Rules of Thumb written by Ruwan Abey Rajapakse and published by Butterworth-Heinemann. This book was released on 2016-02-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Design and Construction Rules of Thumb presents Geotechnical and Civil Engineers a comprehensive coverage of Pile Foundation related theory and practice. Based on the author's experience as a PE, the book brings concise theory and extensive calculations, examples and case studies that can be easily applied by professional in their day-to-day challenges. In its first part, the book covers the fundamentals of Pile Selection: Soil investigation, condition, pile types and how to choose them. In the second part it addresses the Design of Pile Foundations, including different types of soils, pile groups, pile settlement and pile design in rock. Next, the most extensive part covers Design Strategies and contains chapters on loading analysis, load distribution, negative skin friction, design for expansive soils, wave equation analysis, batter piles, seismic analysis and the use of softwares for design aid. The fourth part covers Construction Methods including hammers, Inspection, cost estimation, load tests, offshore piling, beams and caps. In this new and updated edition the author has incorporated new pile designs such as helical, composite, wind turbine monopiles, and spiral coil energy piles. All calculations have been updated to most current materials characteristics and designs available in the market. Also, new chapters on negative skin friction, pile driving, and pile load testing have been added. Practicing Geotechnical, and Civil Engineers will find in this book an excellent handbook for frequent consult, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering preparing for PE exams may benefit from the extensive coverage of the subject. - Convenient for day-to-day consults - Numerous design examples for sandy soils, clay soils, and seismic loadings - Now including helical, composite, wind turbine monopiles, and spiral coil energy piles - Methodologies and case studies for different pile types - Serves as PE exam preparation material
Download or read book Essentials of Soil Mechanics and Foundations Pearson New International Edition written by David F. McCarthy and published by . This book was released on 2013-11-01 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Soil Mechanics and Foundations. Essentials of Soil Mechanics and Foundations: Basic Geotechnics, Seventh Edition, provides a clear, detailed presentation of soil mechanics: the background and basics, the engineering properties and behavior of soil deposits, and the application of soil mechanics theories. Appropriate for soil mechanics courses in engineering, architectural and construction-related programs, this new edition features a separate chapter on earthquakes, a more logical organization, and new material relating to pile foundations design and construction and soil permeability. It's rich applications, well-illustrated examples, end-of-chapter problems and detailed explanations make it an excellent reference for students, practicing engineers, architects, geologists, environmental specialists and more.
Download or read book Pile Foundations in Engineering Practice written by Shamsher Prakash and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.
Download or read book Soil Improvement and Ground Modification Methods written by Peter G. Nicholson and published by Butterworth-Heinemann. This book was released on 2014-08-29 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with more than 25 years of field and academic experience, Soil Improvement and Ground Modification Methods explains ground improvement technologies for converting marginal soil into soil that will support all types of structures. Soil improvement is the alteration of any property of a soil to improve its engineering performance. Some sort of soil improvement must happen on every construction site. This combined with rapid urbanization and the industrial growth presents a huge dilemma to providing a solid structure at a competitive price. The perfect guide for new or practicing engineers, this reference covers projects involving soil stabilization and soil admixtures, including utilization of industrial waste and by-products, commercially available soil admixtures, conventional soil improvement techniques, and state-of-the-art testing methods. - Conventional soil improvement techniques and state-of-the-art testing methods - Methods for mitigating or removing the risk of liquefaction in the event of major vibrations - Structural elements for stabilization of new or existing construction industrial waste/by-products, commercially available soil - Innovative techniques for drainage, filtration, dewatering, stabilization of waste, and contaminant control and removal
Download or read book Soil Strength and Slope Stability written by J. Michael Duncan and published by John Wiley & Sons. This book was released on 2014-09-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.
Download or read book Subsurface Conditions written by Michael Shaw Rosenbaum and published by Springer Science & Business Media. This book was released on 2003-05-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterisation of the shallow subsurface provides civil, geotechnical and environmental applications with precise definitions of geomechanical and geohydrological properties. Over the past decade, the rapid pace of technological innovation has outstripped the ability of many researchers and potential users to evaluate and adopt promising new characterisation methods. Modern information technologies and information management concepts provide the basis of new paradigms and applications. This book defines future research needs for geological modelling and ground characterisation, including better dialogue between data provides and users and faster, better and less expensive methods for the creation and dissemination of subsurface characterisations.
Download or read book RCRA Ground water Monitoring Technical Enforcement Guidance Document TEGD written by and published by . This book was released on 1986 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
