Download or read book Specification of a CAD I Neutral File for Solids written by E.G. Schlechtendahl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited for Working Group 2 (WG 2): Cisigraph, Cranfield Institute of Technology, Danmarks Tekniske Hojskole, Kernforschungszentrum Karlsruhe GmbH, NEH Consulting Engineers ApS, Universität Karlsruhe
Download or read book Specification of a CAD I Neutral File for CAD Geometry written by E.G. Schlechtendahl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: ESPRIT Project 322, "CAD Interfaces", has been established to define the most important interfaces in CAD/CAM systems for data exchange, data base, finite element analysis, experimental analysis, and advanced modeling. The definitions of these interfaces are being elaborated in harmony with international standardization efforts in this field. One principal goal of the project is to develop techniques for the exchange of CAD information between CAD systems, and from the CAD domain to CAA (Computer Aided Analysis) and CAM (Computer Aided Manufacturing). This volume presents a proposal for a neutral file format for CAD data: curves, surfaces, and solids. The specification is based on a reference schema for CAD data bases and is defined informally with respect to its semantics and formally with respect to its syntax. This volume is a revised edition of "Specification of a CAD*I Neutral File for Solids" Version 3.2. The revision reflects the enhancements which result from the implementation of communication processors in eight different CAD systems and from the practical exchange of solid models between these systems. Due to the close interaction between the CAD*I project and the coming-up international standard STEP this specification also serves as an introduction to the geometry model that will be included in the future international standard.
Download or read book Specification of a CAD I Neutral File for CAD Geometry written by E.G. Schlechtendahl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1.1 PURPOSE The purpose of this paper is to document the results of Working Group (wireframes), Working Group 2 (solids) ,and Working Group 3 (surfaces) of the ESPRIT project 322 CAD*I (CAD Interfaces). The goal of these working groups is: 1. Develop a neutral file format for transfer of CAD data (curves, surfaces, and solid models) between CAD systems, and from the CAD domain to CAA (computer aided analysis) and CAM (computer aided manufacturing). 2. Develop pre- and post-processors with a number of representative CAD systems for this neutral file format. 3. Develop representative test model files and perform cycle tests and inter-system tests for CAD model transfer. 4. Contribute to the standardization activities in the national standardi zation bodies and in ISO for the establishment of a neutral file format for CAD data. This paper corresponds to a development stage as it was reached on July 6, 1987.
Download or read book Specification of a CAD I Neutral File for CAD Geometry written by E G Schlechtendahl and published by . This book was released on 1987-09-09 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specification of a Cad 1 Neutral File for Cad Geometry Wireframes Surfaces Solids Version 3 2 Second Revised and Enlarged Edition written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Specification of a CAD 1 Neutral File for CAD Geometry written by Ernst G. Schlechtendahl and published by Springer. This book was released on 1987 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CAD Data Transfer for Solid Models written by E.G. Schlechtendahl and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principal authors: U. Kroszynski, B. Palstr9Sm 1.1 The evolution of concepts and specifications for CAD data exchange The CAD/CAM community has witnessed, during the last decade, the appearance of several specifications as well as proposals for standards which either attempt to cover wider areas or to be more reliable and stable than the others. With the rapid evolution of both hardware and software, the capabilities offered by CAD systems and CAD based application systems are far more advanced than they were only ten years ago, even when they are now based on micro-computers or personal comput ers. The situation with standards, however, is not and cannot be so. In order to be reliable and accepted by a wide community of both vendors and users, a standard has to be sta ble. This implies a life span of at least a decade. This also implies that the standard has to be general and flexible enough to accommodate present as well as expected future developments. 1.1.1 IGES The initial development of concepts for CAD data exchange is strongly influenced by the US Integrated Computer Aided Manufacturing (ICAM) programme, that dealt with the development of methods for data exchange. In September 1979, a subgroup was estab lished with participation of the National Bureau of Standards, the General Electric Com pany, and the Boeing Company. The result of this effort was the Initial Graphics Exchange Specification (IGES) that was published as a NBS report [61] in 1980.
Download or read book Theory and Practice of Geometric Modeling written by Wolfgang Straßer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a result of the lectures and discussions during the conference "Theory and Practice of Geometric Modeling". The event has been organized by the Wilhelm-Schickard-Institut fiir Informatik, Universitat Tiibingen and took place at the Heinrich-Fabri-Institut in Blaubeuren from October 3 to 7, 1988. The conference brought together leading experts from academic and industrial research institutions, CAD system developers and experien ced users to exchange their ideas and to discuss new concepts and future directions in geometric modeling. The main intention has been to bridge the gap between theoretical results, performance of existing CAD systems and the real problems of users. The contents is structured in five parts: A Algorithmic Aspects B Surface Intersection, Blending, Ray Tracing C Geometric Tools D Different Representation Schemes in Solid Modeling E Product Modeling in High Level Specifications The material presented in this book reflects the current state of the art in geometric modeling and should therefore be of interest not only to university and industry researchers, but also to system developers and practitioners who wish to keep up to date on recent advances and new concepts in this rapidly expanding field. The editors express their sincere appreciation to the contributing authors, and to the members of the program committee, W. Boehm, J. Hoschek, A. Massabo, H. Nowacki, M. Pratt, J. Rossignac, T. Sederberg and W. Tiller, for their close cooperation and their time and effort that made the conference and this book a success.
Download or read book Peterson s Stress Concentration Factors written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bible of stress concentration factors—updated to reflect today's advances in stress analysis This book establishes and maintains a system of data classification for all the applications of stress and strain analysis, and expedites their synthesis into CAD applications. Filled with all of the latest developments in stress and strain analysis, this Fourth Edition presents stress concentration factors both graphically and with formulas, and the illustrated index allows readers to identify structures and shapes of interest based on the geometry and loading of the location of a stress concentration factor. Peterson's Stress Concentration Factors, Fourth Edition includes a thorough introduction of the theory and methods for static and fatigue design, quantification of stress and strain, research on stress concentration factors for weld joints and composite materials, and a new introduction to the systematic stress analysis approach using Finite Element Analysis (FEA). From notches and grooves to shoulder fillets and holes, readers will learn everything they need to know about stress concentration in one single volume. Peterson's is the practitioner's go-to stress concentration factors reference Includes completely revised introductory chapters on fundamentals of stress analysis; miscellaneous design elements; finite element analysis (FEA) for stress analysis Features new research on stress concentration factors related to weld joints and composite materials Takes a deep dive into the theory and methods for material characterization, quantification and analysis methods of stress and strain, and static and fatigue design Peterson's Stress Concentration Factors is an excellent book for all mechanical, civil, and structural engineers, and for all engineering students and researchers.
Download or read book CAD I Drafting Model written by Richard Schuster and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content of this book is an information model for technical drawings, the so-called "Drafting Model". The Drafting Model is a part of a complex information model describing product definition data, their applications and their representations. The definition of the information model is a central component of the development of STEP, a future international standard for the exchange of product defmition data. Here the Drafting Model particularly encloses descriptions for the representations of organizational drawing data, tolerances, dimensions and surface attributes such as surface fmish symbols (a survey of the whole content is shown in the figure above). Additional to that requirements for the Presentation Model concerning the representation of geometry as well as the integration process for both the Drafting and the Presentation Models are formulated. The extent of the Drafting Model is restricted to the application area "Mechanical Engineering". Within the Drafting Model the annotation representations are described on the one hand informally and on the other hand formally using a high level language for information modeling, EXPRESS. Principally the representations of the annotation are described according to the international drawing standards. Thus the semantics pertinent to the specific graphical appearance are maintained. The data structures provide formal descriptions of annotations at a high generation level, which means that a "way" is defmed how to generate these annotations.
Download or read book Advanced Modelling for CAD CAM Systems written by Hans Grabowski and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reiner Anderl The Advanced Modelling part of the CAD*I project aimed at the development of a new generation of modelling techniques as a basic functionality of future CAD/CAM systems. The methodology and concepts for advanced modelling techniques, their availability in the communication interface of a CAD/CAM system and their influence on internal interfaces in the software architecture of a CAD/CAM system are fundamental results of advanced modelling work. These results form the basis for the development of a new generation of CAD/CAM systems which are called product modelling systems. CAD/CAM systems today mainly support the geometric description of a technical part or its description as a technical drawing. Advanced geometric modelling capabilities deal with parametric design functions embedded into CAD/CAM systems. However, development strategies for future CAD/CAM systems are directed toward the following: 1. The development of product modelling systems and 2. the development of integrated systems based on CAD, CAP (Computer Aided Planning), CAM and other CIM (Computer Integrated Manu facturing) functionalities.
Download or read book Improving the Performance of Neutral File Data Transfers written by Raymond J. Goult and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with problems and solutions associated with the exchange of data between different computer aided design, engineering and manufacturing (CAx) systems. After an analysis of the current problems a new strategy consisting of a test methodology, check software and tools for the improvement of the data exchange process are discussed. The particular problems associated with the transfer of curve and surface data are expanded upon and new methods to overcome them presented. With all these tools a system-specific adaption of neutral files is made possible. Thus the integration of several incompatible CAx systems within devel- opment and production processes can be effectively improved. In order to exclude incorrect data a new methodology for neutral file processor tests has been worked out. Finally, the benefits resulting from this new strategy are shown by the example of data transfer not only between CAx systems but also between consecutive production processes.
Download or read book Boundary Representation Modelling Techniques written by Ian Stroud and published by Springer Science & Business Media. This book was released on 2006-12-22 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boundary representation is the principal solid modelling method used in modern CAD/CAM systems. There have been a long series of developments on which currently available systems are based, full details of which are only partially known. Ian Stroud’s thorough coverage of these developments puts this technology in perspective and provides the most complete presentation of boundary representation solid modelling yet published.
Download or read book Building Information Modeling written by Karen M. Kensek and published by Routledge. This book was released on 2014-04-16 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a design guide for architects, engineers, and contractors concerning the principles and specific applications of building information modeling (BIM). BIM has the potential to revolutionize the building industry, and yet not all architects and construction professionals fully understand what the benefits of BIM are or even the fundamental concepts behind it. As part of the PocketArchitecture Series it includes two parts: fundamentals and applications, which provide a comprehensive overview of all the necessary and essential issues. It also includes case studies from a range of project sizes that illustrate the key concepts clearly and use a wide range of visual aids. Building Information Modeling addresses the key role that BIM is playing in shaping the software tools and office processes in the architecture, engineering, and construction professions. Primarily aimed at professionals, it is also useful for faculty who wish to incorporate this information into their courses on digital design, BIM, and professional practice. As a compact summary of key ideas it is ideal for anyone implementing BIM.
Download or read book Euro Abstracts written by and published by . This book was released on 1990 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of CAD CAPP CAM written by Jianbin Xue and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-07-23 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the fundamentals and development of Computer aided design, Computer aided process planning, and Computer aided manufacturing. The integration of CAD/CAPP/CAM, product data management and Concurrent engineering and collaborative design etc. are also illustrated in detail, which make this book be an essential reference for graduate students, scientists and practitioner in the research fields of computer sciences and engineering.
Download or read book Digital Human Modeling and Applications in Health Safety Ergonomics and Risk Management written by Vincent G. Duffy and published by Springer Nature. This book was released on 2023-07-11 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th Digital Human Modeling & Applications in Health, Safety, Ergonomics & Risk Management (DHM) Conference, held as part of the 25th International Conference, HCI International 2023, which was held virtually in Copenhagen, Denmark in July 2023. The total of 1578 papers and 396 posters included in the HCII 2023 proceedings was carefully reviewed and selected from 7472 submissions. The DHM 2023 method focuses on different areas of application and has produced works focused on human factors and ergonomics based on human models, novel approaches in healthcare and the application of artificial intelligence in medicine. Interesting applications will be shown in many sectors. Work design and productivity, robotics and intelligent systems are among this year's human-machine modeling and results reporting efforts.