Download or read book Process Dynamics and Control written by Dale E. Seborg and published by John Wiley & Sons. This book was released on 2016-09-13 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new 4th edition of Seborg’s Process Dynamics Control provides full topical coverage for process control courses in the chemical engineering curriculum, emphasizing how process control and its related fields of process modeling and optimization are essential to the development of high-value products. A principal objective of this new edition is to describe modern techniques for control processes, with an emphasis on complex systems necessary to the development, design, and operation of modern processing plants. Control process instructors can cover the basic material while also having the flexibility to include advanced topics.
Download or read book Process Dynamics and Control written by Brian Roffel and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a different approach to other textbooks in the area, this book is a comprehensive introduction to the subject divided in three broad parts. The first part deals with building physical models, the second part with developing empirical models and the final part discusses developing process control solutions. Theory is discussed where needed to ensure students have a full understanding of key techniques that are used to solve a modeling problem. Hallmark Features: Includes worked out examples of processes where the theory learned early on in the text can be applied. Uses MATLAB simulation examples of all processes and modeling techniques- further information on MATLAB can be obtained from www.mathworks.com Includes supplementary website to include further references, worked examples and figures from the book This book is structured and aimed at upper level undergraduate students within chemical engineering and other engineering disciplines looking for a comprehensive introduction to the subject. It is also of use to practitioners of process control where the integrated approach of physical and empirical modeling is particularly valuable.
Download or read book Understanding Process Dynamics and Control written by Costas Kravaris and published by Cambridge University Press. This book was released on 2021-04-08 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a fresh look at process control, this new text demonstrates state-space approach shown in parallel with the traditional approach to explain the strategies used in industry today. Modern time-domain and traditional transform-domain methods are integrated throughout and explain the advantages and limitations of each approach; the fundamental theoretical concepts and methods of process control are applied to practical problems. To ensure understanding of the mathematical calculations involved, MATLAB® is included for numeric calculations and MAPLE for symbolic calculations, with the math behind every method carefully explained so that students develop a clear understanding of how and why the software tools work. Written for a one-semester course with optional advanced-level material, features include solved examples, cases that include a number of chemical reactor examples, chapter summaries, key terms, and concepts, as well as over 240 end-of-chapter problems, focused computational exercises and solutions for instructors.
Download or read book Process Control Concepts Dynamics And Applications written by S. K. Singh and published by PHI Learning Pvt. Ltd.. This book was released on 2007-12 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive introduction to the vast and important field of control systems. The text introduces the theory of automatic control and its applications to the chemical process industries with emphasis on topics that are of use to the process control engineers and specialists. It also covers the advanced control strategies and its practical implementation with an excellent balance of theoretical concepts and engineering practice.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Process Control written by B. Wayne Bequette and published by Prentice Hall Professional. This book was released on 2003 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master process control hands on, through practical examples and MATLAB(R) simulations This is the first complete introduction to process control that fully integrates software tools--enabling professionals and students to master critical techniques hands on, through computer simulations based on the popular MATLAB environment. Process Control: Modeling, Design, and Simulation teaches the field's most important techniques, behaviors, and control problems through practical examples, supplemented by extensive exercises--with detailed derivations, relevant software files, and additional techniques available on a companion Web site. Coverage includes: Fundamentals of process control and instrumentation, including objectives, variables, and block diagrams Methodologies for developing dynamic models of chemical processes Dynamic behavior of linear systems: state space models, transfer function-based models, and more Feedback control; proportional, integral, and derivative (PID) controllers; and closed-loop stability analysis Frequency response analysis techniques for evaluating the robustness of control systems Improving control loop performance: internal model control (IMC), automatic tuning, gain scheduling, and enhancements to improve disturbance rejection Split-range, selective, and override strategies for switching among inputs or outputs Control loop interactions and multivariable controllers An introduction to model predictive control (MPC) Bequette walks step by step through the development of control instrumentation diagrams for an entire chemical process, reviewing common control strategies for individual unit operations, then discussing strategies for integrated systems. The book also includes 16 learning modules demonstrating how to use MATLAB and SIMULINK to solve several key control problems, ranging from robustness analyses to biochemical reactors, biomedical problems to multivariable control.
Download or read book Chemical Process Control written by George Stephanopoulos and published by Prentice Hall. This book was released on 1984 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all aspects of chemical process control and provides a clear and complete overview of the design and hardware elements needed for practical implementation.
Download or read book Practical Process Control written by Cecil L. Smith and published by John Wiley & Sons. This book was released on 2009-02-10 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Process Control (loop tuning and troubleshooting). This book differs from others on the market in several respects. First, the presentation is totally in the time domain (the word "LaPlace" is nowhere to be found). The focus of the book is actually troubleshooting, not tuning. If a controller is "tunable", the tuning procedure will be straightforward and uneventful. But if a loop is "untunable", difficulties will be experienced, usually early in the tuning effort. The nature of any difficulty provides valuable clues to what is rendering the loop "untunable". For example, if reducing the controller gain leads to increased oscillations, one should look for possible interaction with one or more other loops. Tuning difficulties are always symptoms of other problems; effective troubleshooting involves recognizing the clues, identifying the root cause of the problem, and making corrections. Furthermore, most loops are rendered "untunable" due to some aspect of the steady-state behavior of the process. Consequently, the book focuses more on the relationship of process control to steady-state process characteristics than to dynamic process characteristics. One prerequisite to effective troubleshooting is to "demystify" some of the characteristics of the PID control equations. One unique aspect of this book is that it explains in the time domain all aspects of the PID control equation (including as the difference between the parallel and series forms of the PID, the reset feedback form of the PID equation, reset windup protection, etc.) The book stresses an appropriate P&I (process and instrumentation) diagram as critical to successful tuning. If the P&I is not right, tuning difficulties are inevitable. Developing and analyzing P&I diagrams is a critical aspect of troubleshooting.
Download or read book A Real Time Approach to Process Control written by William Y. Svrcek and published by John Wiley & Sons. This book was released on 2013-03-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Real- Time Approach to Process Control provides the reader with both a theoretical and practical introduction to this increasingly important approach. Assuming no prior knowledge of the subject, this text introduces all of the applied fundamentals of process control from instrumentation to process dynamics, PID loops and tuning, to distillation, multi-loop and plant-wide control. In addition, readers come away with a working knowledge of the three most popular dynamic simulation packages. The text carefully balances theory and practice by offering readings and lecture materials along with hands-on workshops that provide a 'virtual' process on which to experiment and from which to learn modern, real time control strategy development. As well as a general updating of the book specific changes include: A new section on boiler control in the chapter on common control loops A major rewrite of the chapters on distillation column control and multiple single-loop control schemes The addition of new figures throughout the text Workshop instructions will be altered to suit the latest versions of HYSYS, ASPEN and DYNSIM simulation software A new solutions manual for the workshop problems
Download or read book Process Dynamics Modeling and Control written by Babatunde Ayodeji Ogunnaike and published by Topics in Chemical Engineering. This book was released on 1994 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers a modern view of process control in the context of today's technology. It provides the standard material in a coherent presentation and uses a notation that is more consistent with the research literature in process control. Topics that are unique include a unified approach to model representations, process model formation and process identification, multivariable control, statistical quality control, and model-based control. This book is designed to be used as an introductory text for undergraduate courses in process dynamics and control. In addition to chemical engineering courses, the text would also be suitable for such courses taught in mechanical, nuclear, industrial, and metallurgical engineering departments. The material is organized so that modern concepts are presented to the student but details of the most advanced material are left to later chapters. The text material has been developed, refined, and classroom tested over the last 10-15 years at the University of Wisconsin and more recently at the University of Delaware. As part of the course at Wisconsin, a laboratory has been developed to allow the students hands-on experience with measurement instruments, real time computers, and experimental process dynamics and control problems.
Download or read book Nonlinear Process Control written by Michael A. Henson and published by Prentice Hall. This book was released on 1997 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Process Control assembles the latest theoretical and practical research on design, analysis and application of nonlinear process control strategies. It presents detailed coverage of all three major elements of nonlinear process control: identification, controller design, and state estimation. Nonlinear Process Control reflects the contributions of eleven leading researchers in the field. It is an ideal textbook for graduate courses in process control, as well as a concise, up-to-date reference for control engineers.
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
Download or read book Dynamics and Nonlinear Control of Integrated Process Systems written by Michael Baldea and published by Cambridge University Press. This book was released on 2012-08-02 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: A theoretical and practical guide to reducing model complexity and achieving tight control of modern integrated plants.
Download or read book Process Control Designing Processes and Control Systems for Dynamic Performance written by Thomas E. Marlin and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 2000-02-02 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Process Systems Analysis and Control written by Steven E. LeBlanc and published by . This book was released on 2013 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Software Process Dynamics written by Raymond J. Madachy and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed for professionals and students in software engineering or information technology who are interested in understanding the dynamics of software development in order to assess and optimize their own process strategies. It explains how simulation of interrelated technical and social factors can provide a means for organizations to vastly improve their processes. It is structured for readers to approach the subject from different perspectives, and includes descriptive summaries of the best research and applications.
Download or read book Dynamics and Control of Chemical Reactors Distillation Columns and Batch Processes DYCORD 92 written by J.G. Balchen and published by Elsevier. This book was released on 2014-05-23 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to the three main themes: chemical reactors, distillation columns, and batch processes this volume also addresses some of the new trends in dynamics and control methodology such as model based predictive control, new methods for identification of dynamic models, nonlinear control theory and the application of neural networks to identification and control. Provides a useful reference source of the major advances in the field.
