Download or read book Intelligent Systems in Technical and Medical Diagnostics written by Jozef Korbicz and published by Springer Science & Business Media. This book was released on 2013-07-18 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years technical and medical diagnostics has been the area of intensive scientific research. It covers well-established topics as well as emerging developments in control engineering, artificial intelligence, applied mathematics, pattern recognition and statistics. At the same time, a growing number of applications of different fault diagnosis methods, especially in electrical, mechanical, chemical and medical engineering, is being observed. This monograph contains a collection of 44 carefully selected papers contributed by experts in technical and medical diagnostics, and constitutes a comprehensive study of the field. The aim of the book is to show the bridge between technical and medical diagnostics based on artificial intelligence methods and techniques. It is divided into four parts: I. Soft Computing in Technical Diagnostics, II. Medical Diagnostics and Biometrics, III. Robotics and Computer Vision, IV. Various Problems of Technical Diagnostics. The monograph will be of interest to scientists as well as academics dealing with the problems of designing technical and medical diagnosis systems. Its target readers are also junior researchers and students of computer science, artificial intelligence, control or robotics.

Download or read book Robotics written by Fernando Santos Osório and published by Springer. This book was released on 2016-09-29 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th Latin American Robotics Symposium and Third Brazilian Symposium on Robotics, LARS 2015 / SBR 2015, held in Uberlândia, Brazil, in October/November 2015. The 17 revised full papers presented were carefully reviewed and selected from 80 submissions. The selected papers present a complete and solid reference of the state-of-the-art of intelligent robotics and automation research, covering the following areas: autonomous mobile robots, tele-operated and telepresence robots, human-robot interaction, trajectory control for mobile robots, autonomous vehicles, service-oriented robotic systems, semantic mapping, environment mapping, visual odometry, applications of RGB-D sensors, humanoid and biped robots, Robocup soccer robots, robot control, path planning, multiple vehicles and teams of robots. /div

Download or read book Wind Turbine Control and Monitoring written by Ningsu Luo and published by Springer. This book was released on 2014-08-30 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the latest technical developments and trends involving wind turbine control and monitoring, fault diagnosis, and wind power systems, ‘Wind Turbine Control and Monitoring’ presents an accessible and straightforward introduction to wind turbines, but also includes an in-depth analysis incorporating illustrations, tables and examples on how to use wind turbine modeling and simulation software. Featuring analysis from leading experts and researchers in the field, the book provides new understanding, methodologies and algorithms of control and monitoring, computer tools for modeling and simulation, and advances the current state-of-the-art on wind turbine monitoring and fault diagnosis; power converter systems; and cooperative & fault-tolerant control systems for maximizing the wind power generation and reducing the maintenance cost. This book is primarily intended for researchers in the field of wind turbines, control, mechatronics and energy; postgraduates in the field of mechanical and electrical engineering; and graduate and senior undergraduate students in engineering wishing to expand their knowledge of wind energy systems. The book will also interest practicing engineers dealing with wind technology who will benefit from the comprehensive coverage of the theoretic control topics, the simplicity of the models and the use of commonly available control algorithms and monitoring techniques.

Download or read book Solving Optimization Problems with the Heuristic Kalman Algorithm written by Rosario Toscano and published by Springer Nature. This book was released on with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Computing written by Kohei Arai and published by Springer Nature. This book was released on with total page 1269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive collection of chapters focusing on the core areas of computing and their further applications in the real world. Each chapter is a paper presented at the Computing Conference 2021 held on 15-16 July 2021. Computing 2021 attracted a total of 638 submissions which underwent a double-blind peer review process. Of those 638 submissions, 235 submissions have been selected to be included in this book. The goal of this conference is to give a platform to researchers with fundamental contributions and to be a premier venue for academic and industry practitioners to share new ideas and development experiences. We hope that readers find this volume interesting and valuable as it provides the state-of-the-art intelligent methods and techniques for solving real-world problems. We also expect that the conference and its publications is a trigger for further related research and technology improvements in this important subject. .

Download or read book State Estimation and Control for Low cost Unmanned Aerial Vehicles written by Chingiz Hajiyev and published by Springer. This book was released on 2015-06-10 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses state estimation and control procedures for a low-cost unmanned aerial vehicle (UAV). The authors consider the use of robust adaptive Kalman filter algorithms and demonstrate their advantages over the optimal Kalman filter in the context of the difficult and varied environments in which UAVs may be employed. Fault detection and isolation (FDI) and data fusion for UAV air-data systems are also investigated, and control algorithms, including the classical, optimal, and fuzzy controllers, are given for the UAV. The performance of different control methods is investigated and the results compared. State Estimation and Control of Low-Cost Unmanned Aerial Vehicles covers all the important issues for designing a guidance, navigation and control (GNC) system of a low-cost UAV. It proposes significant new approaches that can be exploited by GNC system designers in the future and also reviews the current literature. The state estimation, control and FDI methods are illustrated by examples and MATLAB® simulations. State Estimation and Control of Low-Cost Unmanned Aerial Vehicles will be of interest to both researchers in academia and professional engineers in the aerospace industry. Graduate students may also find it useful, and some sections are suitable for an undergraduate readership.

Download or read book Benefits of Bayesian Network Models written by Philippe Weber and published by John Wiley & Sons. This book was released on 2016-08-29 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Bayesian Networks (BN) or Dynamic Bayesian Networks (DBN) in dependability and risk analysis is a recent development. A large number of scientific publications show the interest in the applications of BN in this field. Unfortunately, this modeling formalism is not fully accepted in the industry. The questions facing today's engineers are focused on the validity of BN models and the resulting estimates. Indeed, a BN model is not based on a specific semantic in dependability but offers a general formalism for modeling problems under uncertainty. This book explains the principles of knowledge structuration to ensure a valid BN and DBN model and illustrate the flexibility and efficiency of these representations in dependability, risk analysis and control of multi-state systems and dynamic systems. Across five chapters, the authors present several modeling methods and industrial applications are referenced for illustration in real industrial contexts.

Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.

Download or read book Fault Diagnosis Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing demands for efficiency and product quality plus progress in the integration of automatic control systems in high-cost mechatronic and safety-critical processes, the field of supervision (or monitoring), fault detection and fault diagnosis plays an important role. The book gives an introduction into advanced methods of fault detection and diagnosis (FDD). After definitions of important terms, it considers the reliability, availability, safety and systems integrity of technical processes. Then fault-detection methods for single signals without models such as limit and trend checking and with harmonic and stochastic models, such as Fourier analysis, correlation and wavelets are treated. This is followed by fault detection with process models using the relationships between signals such as parameter estimation, parity equations, observers and principal component analysis. The treated fault-diagnosis methods include classification methods from Bayes classification to neural networks with decision trees and inference methods from approximate reasoning with fuzzy logic to hybrid fuzzy-neuro systems. Several practical examples for fault detection and diagnosis of DC motor drives, a centrifugal pump, automotive suspension and tire demonstrate applications.

Download or read book Fault Detection Supervision and Safety of Technical Processes 2006 written by Hong-Yue Zhang and published by Elsevier. This book was released on 2007-03-01 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable operation of technical systems is of great significance for the protection of human life and health, the environment, and of the vested economic value. The correct functioning of those systems has a profound impact also on production cost and product quality. The early detection of faults is critical in avoiding performance degradation and damage to the machinery or human life. Accurate diagnosis then helps to make the right decisions on emergency actions and repairs. Fault detection and diagnosis (FDD) has developed into a major area of research, at the intersection of systems and control engineering, artificial intelligence, applied mathematics and statistics, and such application fields as chemical, electrical, mechanical and aerospace engineering. IFAC has recognized the significance of FDD by launching a triennial symposium series dedicated to the subject. The SAFEPROCESS Symposium is organized every three years since the first symposium held in Baden-Baden in 1991. SAFEPROCESS 2006, the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes was held in Beijing, PR China. The program included three plenary papers, two semi-plenary papers, two industrial talks by internationally recognized experts and 258 regular papers, which have been selected out of a total of 387 regular and invited papers submitted. * Discusses the developments and future challenges in all aspects of fault diagnosis and fault tolerant control * 8 invited and 36 contributed sessions included with a special session on the demonstration of process monitoring and diagnostic software tools

Download or read book Active Fault Tolerant Control Systems written by Mufeed Mahmoud and published by Springer Science & Business Media. This book was released on 2003-02-13 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern technological systems rely on sophisticated control functions to meet increased performance requirements. For such systems, Fault Tolerant Control Systems (FTCS) need to be developed. Active FTCS are dependent on a Fault Detection and Identification (FDI) process to monitor system performance and to detect and isolate faults in the systems. The main objective of this book is to study and to validate some important issues in real-time Active FTCS by means of theoretical analysis and simulation. Several models are presented to achieve this objective, taking into consideration practical aspects of the system to be controlled, performance deterioration in FDI algorithms, and limitations in reconfigurable control laws.

Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer. This book was released on 2010-04-18 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Download or read book Advances in Aerospace Guidance Navigation and Control written by Florian Holzapfel and published by Springer Science & Business Media. This book was released on 2011-03-15 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few decades, both the aeronautics and space disciplines have greatly influenced advances in controls, sensors, data fusion and navigation. Many of those achievements that made the word “aerospace” synonymous with “high–tech” were enabled by innovations in guidance, navigation and control. Europe has seen a strong trans-national consolidation process in aerospace over the last few decades. Most of the visible products, like commercial aircraft, fighters, helicopters, satellites, launchers or missiles, are not made by a single country – they are the fruits of cooperation. No European country by itself hosts a specialized guidance, navigation and controls community large enough to cover the whole spectrum of disciplines. However, on a European scale, mutual exchange of ideas, concepts and solutions is enriching for all. The 1st CEAS Specialist Conference on Guidance, Navigation and Control is an attempt to bring this community together. This book is a selection of papers presented at the conference. All submitted papers have gone through a formal review process in compliance with good journal practices. The best papers have been recommended by the reviewers to be published in this book.

Download or read book Fault Diagnosis written by Józef Korbicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive work presents the status and likely development of fault diagnosis, an emerging discipline of modern control engineering. It covers fundamentals of model-based fault diagnosis in a wide context, providing a good introduction to the theoretical foundation and many basic approaches of fault detection.

Download or read book Fault tolerant Control Systems written by Hassan Noura and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.

Download or read book Model based Fault Diagnosis in Dynamic Systems Using Identification Techniques written by Silvio Simani and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in industrial process and production plants is a concern of rising importance but because the control devices which are now exploited to improve the performance of industrial processes include both sophisticated digital system design techniques and complex hardware, there is a higher probability of failure. Control systems must include automatic supervision of closed-loop operation to detect and isolate malfunctions quickly. A promising method for solving this problem is "analytical redundancy", in which residual signals are obtained and an accurate model of the system mimics real process behaviour. If a fault occurs, the residual signal is used to diagnose and isolate the malfunction. This book focuses on model identification oriented to the analytical approach of fault diagnosis and identification covering: choice of model structure; parameter identification; residual generation; and fault diagnosis and isolation. Sample case studies are used to demonstrate the application of these techniques.

Download or read book Fault Detection Supervision and Safety of Technical Processes 2006 written by Hong-Yue Zhang and published by . This book was released on 2007 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable operation of technical systems is of great significance for the protection of human life and health, the environment, and of the vested economic value. The correct functioning of those systems has a profound impact also on production cost and product quality. The early detection of faults is critical in avoiding performance degradation and damage to the machinery or human life. Accurate diagnosis then helps to make the right decisions on emergency actions and repairs. Fault detection and diagnosis (FDD) has developed into a major area of research, at the intersection of systems and control engineering, artificial intelligence, applied mathematics and statistics, and such application fields as chemical, electrical, mechanical and aerospace engineering. IFAC has recognized the significance of FDD by launching a triennial symposium series dedicated to the subject. The SAFEPROCESS Symposium is organized every three years since the first symposium held in Baden-Baden in 1991. SAFEPROCESS 2006, the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes was held in Beijing, PR China. The program included three plenary papers, two semi-plenary papers, two industrial talks by internationally recognized experts and 258 regular papers, which have been selected out of a total of 387 regular and invited papers submitted. * Discusses the developments and future challenges in all aspects of fault diagnosis and fault tolerant control * 8 invited and 36 contributed sessions included with a special session on the demonstration of process monitoring and diagnostic software tools.