Download or read book Crystal Growth of Organic Materials written by Allan S. Myerson and published by . This book was released on 1996 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines emerging technologies in the use of crystallization as a purification and separation process in the food, pharmaceutical, and commodity and specialty chemical industries. Discusses the application of molecular modelling and calculation chemistry to crystallization. Includes chapters focusing on crystal morphology and chirality.
Download or read book Science and Application of Nanotubes written by D. Tománek and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science, and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E-mail: thorpe@pa. msu. edu East Lansing, Michigan V PREFACE It is hard to believe that not quite ten years ago, namely in 1991, nanotubes of carbon were discovered by Sumio Iijima in deposits on the electrodes of the same carbon arc apparatus that was used to produce fullerenes such as the “buckyball”. Nanotubes of carbon or other materials, consisting ofhollow cylinders that are only a few nanometers in diameter, yet up to millimeters long, are amazing structures that self-assemble under extreme conditions. Their quasi-one-dimensional character and virtual absence of atomic defects give rise to a plethora of unusual phenomena.
Download or read book Advanced Computing written by Michael Bader and published by Springer Science & Business Media. This book was released on 2013-09-26 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume collects review articles that summarize research conducted at the Munich Centre of Advanced Computing (MAC) from 2008 to 2012. The articles address the increasing gap between what should be possible in Computational Science and Engineering due to recent advances in algorithms, hardware, and networks, and what can actually be achieved in practice; they also examine novel computing architectures, where computation itself is a multifaceted process, with hardware awareness or ubiquitous parallelism due to many-core systems being just two of the challenges faced. Topics cover both the methodological aspects of advanced computing (algorithms, parallel computing, data exploration, software engineering) and cutting-edge applications from the fields of chemistry, the geosciences, civil and mechanical engineering, etc., reflecting the highly interdisciplinary nature of the Munich Centre of Advanced Computing.
Download or read book Diamond for Quantum Applications Part 1 written by and published by Academic Press. This book was released on 2020-06-16 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond for Quantum Applications Part 1, Volume 103, the latest release in the Semiconductors and Semimetals series, highlights new advances in the field, with this new volume presenting interesting chapters on a variety of timely topics. Each chapter is written by an international board of authors. Provides the authority and expertise of leading contributors from an international board of authors Presents the latest release in the Semiconductors and Semimetals series Updated release includes the latest information on the use of diamonds for quantum applications
Download or read book OLED Fundamentals written by Daniel J. Gaspar and published by CRC Press. This book was released on 2015-05-15 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Source for Taking on the Next Stage of OLED R&DOLED Fundamentals: Materials, Devices, and Processing of Organic Light-Emitting Diodes brings together key topics across the field of organic light-emitting diodes (OLEDs), from fundamental chemistry and physics to practical materials science and engineering aspects to design and ma
Download or read book Petroleum Formation and Occurrence written by B.P. Tissot and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current and authoritative with many advanced concepts for petroleum geologists, geochemists, geophysicists, or engineers engaged in the search for or production of crude oil and natural gas, or interested in their habitats and the factors that control them, this book is an excellent reference. It is recommended without reservation. AAPG Bulletin.
Download or read book The Fingerprint written by U. S. Department Justice and published by Createspace Independent Publishing Platform. This book was released on 2014-08-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of The Fingerprint Sourcebook originated during a meeting in April 2002. Individuals representing the fingerprint, academic, and scientific communities met in Chicago, Illinois, for a day and a half to discuss the state of fingerprint identification with a view toward the challenges raised by Daubert issues. The meeting was a joint project between the International Association for Identification (IAI) and West Virginia University (WVU). One recommendation that came out of that meeting was a suggestion to create a sourcebook for friction ridge examiners, that is, a single source of researched information regarding the subject. This sourcebook would provide educational, training, and research information for the international scientific community.
Download or read book Molecular Magnetism written by Olivier Kahn and published by Courier Dover Publications. This book was released on 2021-11-17 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly regarded and historic book covers basic concepts of magnetization and magnetic susceptibility, establishes the fundamental equations of molecular magnetism, and examines molecules containing a unique magnetic center. 2019 edition.
Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.
Download or read book Poucher s Perfumes Cosmetics and Soaps written by H. Butler and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poucher's Perfumes Cosmetics and Soaps has been in print since 1923 and is the classic reference work in the field of cosmetics. Now in a fully updated 10th edition, this new volume provides a firm basic knowledge in the science of cosmetics (including toiletries) as well as incorporating the latest trends in scientific applications and legislation which have occurred since the 9th edition. This edition will not only be an excellent reference book for students entering the industry but also for those in specialized research companies, universities and other associated institutions who will be able to gain an overall picture of the modern cosmetic science and industry. The book has been logically ordered into four distinct parts. The historical overview of Part 1 contains an essay demonstrating William Arthur Poucher's influence on the 20th Century cosmetics industry as well as a chapter detailing the long history of cosmetics. Part 2 is a comprehensive listing of the properties and uses of common cosmetic types, ranging from Antiperspirants through to Sunscreen preparations. There are an increased number of raw materials in use today and their chemical, physical and safety benefits are carefully discussed along with formulation examples. The many additions since the last edition demonstrate the dramatic recent expansion in the industry and how changes in legal regulations affecting the development, production and marketing of old, established and new products are operative almost worldwide. Information on specialist products for babies and others is included within individual chapters. The chapters in Part 3 support and outline the current guidelines regarding the assessment and control of safety and stability. This information is presented chemically, physically and microbiologically. Part 3 chapters also detail requirements for the consumer acceptability of both existing and new products. Those legal regulations now in force in the EU, the USA and Japan are carefully described in a separate chapter and the remaining chapters have been extensively updated to explain the technical and practical operations needed to comply with regulations when marketing. This information will be invaluable to European Union and North American companies when preparing legally required product information dossiers. The final chapters in Part 4 contain useful information on the psychology of perfumery as well as detailing methods for the conduct of assessment trials of new products. As ingredient labelling is now an almost universal legal requirement the International Nomenclature of Cosmetics Ingredients (INCI) for raw materials has been used wherever practicable. The advertised volume is the 10th edition of what was previously known as volume 3 of Poucher's Cosmetics and Soaps. Due to changes in the industry there are no plans to bring out new editions of volume 1 and 2.
Download or read book Highway and Urban Environment written by G.M. Morrison and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: With half of the world’s population now living in urban areas, and rapid urbanization continuing apace, it is essential that the growth of urban areas is supported by the development of adequate and sustainable infrastructure. This work offers comprehensive coverage of critical issues on the highway and urban environment which are key to understanding sustainability in the world's expanding urban areas.
Download or read book Functionally Graded Materials written by Y. Miyamoto and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have elapsed since Dr. Renee Ford, editor-in-chief of Materials Technology, first suggested to me to publish a book on Functionally Graded Materials (FGMs). She said that the FGM concept, then largely unknown outside of Japan and a relatively few laboratories elsewhere, would be of great interest to everyone working in the materials field because of its potentially universal applicability. There was no book about FGMs in English at that time, although the number of research papers, review articles, and FGM conference proceedings had been increasing yearly. We discussed what the book should cover, and decided it should present a comprehensive description from basic theory to the most recent applications of FGMs. This would make it useful both as an introduction to FGMs for those simply curious about what this new materials field was all about, and also as a textbook for researchers, engineers, and graduate students in various material fields. The FGM Forum in Japan generously offered to support this publication program. is very difficult for an individual author to write a book that Because it covers such a wide range of various aspects of many different materials, I invited more than 30 eminent materials scientists throughout the world, who were associated with FGM research, to contribute selected topics. I also asked several leading researchers in this field to edit selected chapters: Dr. Barry H. Rabin, then at the U. S.
Download or read book Plant Nanobionics written by Ram Prasad and published by Springer. This book was released on 2019-04-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: An improved understanding of the interactions between nanoparticles and plant retorts, including their uptake, localization, and activity, could revolutionize crop production through increased disease resistance, nutrient utilization, and crop yield. This may further impact other agricultural and industrial processes that are based on plant crops. This two-volume book analyses the key processes involved in the nanoparticle delivery to plants and details the interactions between plants and nanomaterials. Potential plant nanotechnology applications for enhanced nutrient uptake, increased crop productivity and plant disease management are evaluated with careful consideration regarding safe use, social acceptance and ecological impact of these technologies. Plant Nanobionics: Volume 1, Advances in the Understanding of Nanomaterials Research and Applications begins the discussion of nanotechnology applications in plants with the characterization and nanosynthesis of various microbes and covers the mechanisms and etiology of nanostructure function in microbial cells. It focuses on the potential alteration of plant production systems through the controlled release of agrochemicals and targeted delivery of biomolecules. Industrial and medical applications are included. Volume 2 continues this discussion with a focus on biosynthesis and toxicity.
Download or read book Supramolecular Soft Matter written by Takashi Nakanishi and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pivotal text that bridges the gap between fundamentals and applications of soft matter in organic electronics Covering an expanding and highly coveted subject area, Supramolecular Soft Matter enlists the services of leading researchers to help readers understand and manipulate the electronic properties of supramolecular soft materials for use in organic opto-electronic devices, such as photovoltaics and field effect transistors, some of the most desired materials for energy conservation. Rather than offering a compilation of current trends in supramolecular soft matter, this book bridges the gap between fundamentals and applications of soft matter in organic electronics in an effort to open new directions in research for applying supramolecular assembly into organic materials while also focusing on the morphological functions originating from the materials' self-assembled architectures. This unique approach distinguishes Supramolecular Soft Matter as a valuable resource for learning to identify concepts that hold promise for the successful development of organic/polymeric electronics for use in real-world applications. Supramolecular Soft Matter: Combines important topics to help supramolecular chemists and organic electronics researchers work together Covers an interdisciplinary field of prime importance to government-supported R&D research Discusses the concepts and perspectives in a dynamic field to aid in the successful development of organic electronics Includes applications for energy conservation like photovoltaics and field effect transistors Teeming with applicable information on both molecular design and synthesis, as well as the development of smart molecular assemblies for organic electronic systems, Supramolecular Soft Matter provides more practical in-depth coverage of this rapidly evolving technology than any other book in its field.
Download or read book THERMEC 2018 written by Raj Shabadi and published by Trans Tech Publications Ltd. This book was released on 2018-12-26 with total page 2584 pages. Available in PDF, EPUB and Kindle. Book excerpt: 10th International Conference on Processing and Manufacturing of Advanced Materials Selected, peer reviewed papers from the 10th International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, July 09 - July 13, 2018, Paris, France
Download or read book Gallium Oxide written by Masataka Higashiwaki and published by Springer Nature. This book was released on 2020-04-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the new wide-bandgap semiconductor gallium oxide (Ga2O3). Ga2O3 has been attracting much attention due to its excellent materials properties. It features an extremely large bandgap of greater than 4.5 eV and availability of large-size, high-quality native substrates produced from melt-grown bulk single crystals. Ga2O3 is thus a rising star among ultra-wide-bandgap semiconductors and represents a key emerging research field for the worldwide semiconductor community. Expert chapters cover physical properties, synthesis, and state-of-the-art applications, including materials properties, growth techniques of melt-grown bulk single crystals and epitaxial thin films, and many types of devices. The book is an essential resource for academic and industry readers who have an interest in, or plan to start, a new R&D project related to Ga2O3.
Download or read book Inorganic and Organometallic Transition Metal Complexes with Biological Molecules and Living Cells written by Kenneth Kam-Wing Lo and published by Academic Press. This book was released on 2016-12-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inorganic and Organometallic Transition Metal Complexes with Biological Molecules and Living Cells provides a complete overview of this important research area that is perfect for both newcomers and expert researchers in the field. Through concise chapters written and edited by esteemed experts, this book brings together a comprehensive treatment of the area previously only available through scattered, lengthy review articles in the literature. Advanced topics of research are covered, with particular focus on recent advances in the biological applications of transition metal complexes, including inorganic medicine, enzyme inhibitors, antiparasital agents, and biological imaging reagents. - Geared toward researchers and students who seek an introductory overview of the field, as well as researchers working in advanced areas - Focuses on the interactions of inorganic and organometallic transition metal complexes with biological molecules and live cells - Foscuses on the fundamentals and their potential therapeutic and diagnostic applications - Covers recent biological applications of transition metal complexes, such as anticancer drugs, enzyme inhibitors, bioconjugation agents, chemical biology tools, and bioimaging reagents