Download or read book Simulation Driven Modeling and Optimization written by Slawomir Koziel and published by Springer. This book was released on 2016-02-12 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is devoted to the now-ubiquitous use of computational models across most disciplines of engineering and science, led by a trio of world-renowned researchers in the field. Focused on recent advances of modeling and optimization techniques aimed at handling computationally-expensive engineering problems involving simulation models, this book will be an invaluable resource for specialists (engineers, researchers, graduate students) working in areas as diverse as electrical engineering, mechanical and structural engineering, civil engineering, industrial engineering, hydrodynamics, aerospace engineering, microwave and antenna engineering, ocean science and climate modeling, and the automotive industry, where design processes are heavily based on CPU-heavy computer simulations. Various techniques, such as knowledge-based optimization, adjoint sensitivity techniques, and fast replacement models (to name just a few) are explored in-depth along with an array of the latest techniques to optimize the efficiency of the simulation-driven design process. High-fidelity simulation models allow for accurate evaluations of the devices and systems, which is critical in the design process, especially to avoid costly prototyping stages. Despite this and other advantages, the use of simulation tools in the design process is quite challenging due to associated high computational cost. The steady increase of available computational resources does not always translate into the shortening of the design cycle because of the growing demand for higher accuracy and necessity to simulate larger and more complex systems. For this reason, automated simulation-driven design—while highly desirable—is difficult when using conventional numerical optimization routines which normally require a large number of system simulations, each one already expensive.

Download or read book Simulation driven Design Optimization And Modeling For Microwave Engineering written by Qi-jun Zhang and published by World Scientific. This book was released on 2013-03-14 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-aided full-wave electromagnetic (EM) analysis has been used in microwave engineering for the past decade. Initially, its main application area was design verification. Today, EM-simulation-driven optimization and design closure become increasingly important due to the complexity of microwave structures and increasing demands for accuracy. In many situations, theoretical models of microwave structures can only be used to yield the initial designs that need to be further fine-tuned to meet given performance requirements. In addition, EM-based design is a must for a growing number of microwave devices such as ultra-wideband (UWB) antennas, dielectric resonator antennas and substrate-integrated circuits. For circuits like these, no design-ready theoretical models are available, so design improvement can only be obtained through geometry adjustments based on repetitive, time-consuming simulations. On the other hand, various interactions between microwave devices and their environment, such as feeding structures and housing, must be taken into account, and this is only possible through full-wave EM analysis.Electromagnetic simulations can be highly accurate, but they tend to be computationally expensive. Therefore, practical design optimization methods have to be computationally efficient, so that the number of CPU-intensive high-fidelity EM simulations is reduced as much as possible during the design process. For the same reasons, techniques for creating fast yet accurate models of microwave structures become crucially important.In this edited book, the authors strive to review the state-of-the-art simulation-driven microwave design optimization and modeling. A group of international experts specialized in various aspects of microwave computer-aided design summarize and review a wide range of the latest developments and real-world applications. Topics include conventional and surrogate-based design optimization techniques, methods exploiting adjoint sensitivity, simulation-based tuning, space mapping, and several modeling methodologies, such as artificial neural networks and kriging. Applications and case studies include microwave filters, antennas, substrate integrated structures and various active components and circuits. The book also contains a few introductory chapters highlighting the fundamentals of optimization and modeling, gradient-based and derivative-free algorithms, metaheuristics, and surrogate-based optimization techniques, as well as finite difference and finite element methods./a

Download or read book Advances in Artificial Transportation Systems and Simulation written by Rosaldo J F Rossetti and published by Academic Press. This book was released on 2014-12-15 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Intelligent Systems Series encompasses theoretical studies, design methods, and real-world implementations and applications. It publishes titles in three core sub-topic areas: Intelligent Automation, Intelligent Transportation Systems, and Intelligent Computing. Titles focus on professional and academic reference works and handbooks. This volume, Advances in Artificial Transportation Systems and Simulation, covers hot topics including driver assistance systems; cooperative vehicle-highway systems; collision avoidance; pedestrian protection; image, radar and lidar signal processing; and V2V and V2I communications. The readership for the series is broad, reflecting the wide range of intelligent systems interest and application, but focuses on engineering (in particular automation, control, mechatronics, robotics, transportation, automotive, aerospace), electronics and electronic design, and computer science. - Provides researchers and engineers with up to date research results and state-of-the art technologies in the area of intelligent vehicles and transportation systems - Includes case studies plus surveys of the latest research - Covers hot topics including driver assistance systems; cooperative vehicle-highway systems; collision avoidance; pedestrian protection; image, radar and lidar signal processing; V2V and V2I communications

Download or read book Advances in Water Distribution Networks written by Giuseppe Pezzinga and published by MDPI. This book was released on 2019-02-28 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue on Advances in Water Distribution Networks (WDNs) explores four important topics of research in the framework of WDNs, namely simulation and optimization modelling, topology and partitioning, water quality, and service effectiveness. With regard to the first topic, the following aspects are addressed: pressure-driven formulations, algorithms for the optimal location of control valves to minimize leakage, the benefits of water discharge prediction for the remote real time control of valves, and transients generated by pumps operating as turbines. In the context of the second topic, a topological taxonomy of WDNs is presented, and partitioning methods for the creation of district metered areas are compared. In relation to the third topic, the vulnerability to trihalomethane is assessed, and a statistical optimization model to minimize heavy metal releases is presented. Finally, the fourth topic focusses on the estimation of non-revenue water, including leakage and unauthorized consumption, and on the assessment of service under intermittent supply conditions.

Download or read book Chemical Process Design Simulation and Optimization written by Jean-Pierre Corriou and published by . This book was released on 2021 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a series of articles devoted to modeling, simulation, and optimization of processes, mainly chemical. General methods for process modeling and numerical simulation are described with flowsheeting. Population balances are addressed in detail with application to crystal production; energy saving is frequently optimized, including exergy analysis. The coupling between process simulation and computational fluid dynamics is studied for air classification and bubble columns. Pressure swing adsorption, reactive distillation, and nanofiltration are explained in general and applied to particular processes. The synthesis of carbon dots is solved by the design of experiments method. A safety study addresses the consequences of gas explosion.

Download or read book Advanced Hydroinformatic Techniques for the Simulation and Analysis of Water Supply and Distribution Systems written by Manuel Herrera and published by MDPI. This book was released on 2018-07-19 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advanced Hydroinformatic Techniques for the Simulation and Analysis of Water Supply and Distribution Systems" that was published in Water

Download or read book Proceedings of the 21st Congress of the International Ergonomics Association IEA 2021 written by Nancy L. Black and published by Springer Nature. This book was released on 2021-06-12 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), held online on June 13-18, 2021. By highlighting the latest theories and models, as well as cutting-edge technologies and applications, and by combining findings from a range of disciplines including engineering, design, robotics, healthcare, management, computer science, human biology and behavioral science, it provides researchers and practitioners alike with a comprehensive, timely guide on human factors and ergonomics. It also offers an excellent source of innovative ideas to stimulate future discussions and developments aimed at applying knowledge and techniques to optimize system performance, while at the same time promoting the health, safety and wellbeing of individuals. The proceedings include papers from researchers and practitioners, scientists and physicians, institutional leaders, managers and policy makers that contribute to constructing the Human Factors and Ergonomics approach across a variety of methodologies, domains and productive sectors. This volume includes papers addressing the following topics: Working with Computer Systems, Human Modelling and Simulation, Neuroergonomics, Biomechanics, Affective Design, Anthropometry, Advanced Imaging.

Download or read book Neuroergonomics and Cognitive Engineering written by Frederic Dehais and published by AHFE International. This book was released on 2023-07-19 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023), July 20–24, 2023, San Francisco, USA

Download or read book Advances in Modeling and Management of Urban Water Networks written by Alberto Campisano and published by MDPI. This book was released on 2021-01-06 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue on Advances in Modeling and Management of Urban Water Networks (UWNs) explores four important topics of research in the context of UWNs: asset management, modeling of demand and hydraulics, energy recovery, and pipe burst identification and leakage reduction. In the first topic, the multi-objective optimization of interventions on the network is presented to find trade-off solutions between costs and efficiency. In the second topic, methodologies are presented to simulate and predict demand and to simulate network behavior in emergency scenarios. In the third topic, a methodology is presented for the multi-objective optimization of pump-as-turbine (PAT) installation sites in transmission mains. In the fourth topic, methodologies for pipe burst identification and leakage reduction are presented. As for the urban drainage systems (UDSs), the two explored topics are asset management, with a system upgrade to reduce flooding, and modeling of flow and water quality, with analyses on the transition from surface to pressurized flow, impact of water use reduction on the operation of UDSs, and sediment transport in pressurized pipes. The Special Issue also includes one paper dealing with the hydraulic modeling of an urban river with a complex cross-section.

Download or read book Next Generation Teletraffic and Wired Wireless Advanced Networking written by Yevgeni Koucheryavy and published by Springer Science & Business Media. This book was released on 2007-08-23 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Conference on Next Generation Teletraffic and Wired/Wireless Advanced Networking, NEW2AN 2007. The 39 revised full papers presented were carefully reviewed and selected from a total of 113 submissions. The papers are organized in topical sections on teletraffic, traffic characterization and modeling, 3G/UMTS, sensor networks, WLAN, QoS, MANETs, lower layer techniques, PAN technologies, and TCP.

Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.

Download or read book Handbook of Military and Defense Operations Research written by Natalie M. Scala and published by CRC Press. This book was released on 2020-02-10 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operations research (OR) is a core discipline in military and defense management. Coming to the forefront initially during World War II, OR provided critical contributions to logistics, supply chains, and strategic simulation, while enabling superior decision-making for Allied forces. OR has grown to include analytics and many applications, including artificial intelligence, cybersecurity, and big data, and is the cornerstone of management science in manufacturing, marketing, telecommunications, and many other fields. The Handbook of Military and Defense Operations Research presents the voices leading OR and analytics to new heights in security through research, practical applications, case studies, and lessons learned in the field. Features Applies the experiences of educators and practitioners working in the field Employs the latest technology developments in case studies and applications Identifies best practices unique to the military, security, and national defense problem space Highlights similarities and dichotomies between analyses and trends that are unique to military, security, and defense problems.

Download or read book GeoComputation Second Edition written by Robert J. Abrahart and published by CRC Press. This book was released on 2014-06-23 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revision of Openshaw and Abrahart’s seminal work, GeoComputation, Second Edition retains influences of its originators while also providing updated, state-of-the-art information on changes in the computational environment. In keeping with the field’s development, this new edition takes a broader view and provides comprehensive coverage across the field of GeoComputation. See What’s New in the Second Edition: Coverage of ubiquitous computing, the GeoWeb, reproducible research, open access, and agent-based modelling Expanded chapter on Genetic Programming and a separate chapter developed on Evolutionary Algorithms Ten chapters updated by the same or new authors and eight new chapters added to reflect state of the art Each chapter is a stand-alone entity that covers a particular topic. You can simply dip in and out or read it from cover to cover. The opening chapter by Stan Openshaw has been preserved, with only a limited number of minor essential modifications having been enacted. This is not just a matter of respect. Openshaw’s work is eloquent, prophetic, and his overall message remains largely unchanged. In contrast to other books on this subject, GeoComputation: Second Edition supplies a state-of-the-art review of all major areas in GeoComputation with chapters written especially for this book by invited specialists. This approach helps develop and expand a computational culture, one that can exploit the ever-increasing richness of modern geographical and geospatial datasets. It also supplies an instructional guide to be kept within easy reach for regular access and when need arises.

Download or read book Advanced Approaches Applied to Materials Development and Design Predictions written by Abílio M. P. De Jesus and published by MDPI. This book was released on 2020-03-25 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thematic issue on advanced simulation tools applied to materials development and design predictions gathers selected extended papers related to power generation systems, presented at the XIX International Colloquium on Mechanical Fatigue of Metals (ICMFM XIX), organized at University of Porto, Portugal, in 2018. In this issue, the limits of the current generation of materials are explored, which are continuously being reached according to the frontier of hostile environments, whether in the aerospace, nuclear, or petrochemistry industry, or in the design of gas turbines where efficiency of energy production and transformation demands increased temperatures and pressures. Thus, advanced methods and applications for theoretical, numerical, and experimental contributions that address these issues on failure mechanism modeling and simulation of materials are covered. As the Guest Editors, we would like to thank all the authors who submitted papers to this Special Issue. All the papers published were peer-reviewed by experts in the field whose comments helped to improve the quality of the edition. We also would like to thank the Editorial Board of Materials for their assistance in managing this Special Issue.

Download or read book Advances in Grey Systems Research written by Sifeng Liu and published by Springer Science & Business Media. This book was released on 2010-06-28 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains contributions by some of the leading researchers in the area of grey systems theory and applications. All the papers included in this volume are selected from the contributions physically presented at the 2009 IEEE International Conference on Grey Systems and Intelligent Services, November 11 – 12, 2009, Nanjing, Jiangsu, People’s Republic of China. This event was jointly sponsored by IEEE Systems, Man, and Cybernetics Society, Natural Science Foundation of China, and Grey Systems Society of China. Additionally, Nanjing University of Aeronautics and Astronautics also invested heavily in this event with its direct and indirect financial and administrative supports. The conference aimed at bringing together all scholars and experts in the fields of grey systems and intelligent services from around the world to share their cutting edge research results, exchange innovative ideas, promote mutual understanding, and seek potential opportunities for collaboration. The conference program c- mittee received 1054 full paper submissions from 16 countries and geographical regions. Nine hundred sixty four papers were submitted for regular sessions and 90 papers were tunnelled directly for special topic sessions. All the submitted papers, including those aiming at special topic sessions, were rigorously reviewed by at least 3 reviewers. Based on the reviewers’ reports, 251 papers were accepted for oral presentations, while 99 accepted for poster presentations. In other words, only slightly over 33% of the submitted papers were accepted by this conference. The rate of acceptance was lower than one third of the total submissions.

Download or read book Surrogate Based Modeling and Optimization written by Slawomir Koziel and published by Springer Science & Business Media. This book was released on 2013-06-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary engineering design is heavily based on computer simulations. Accurate, high-fidelity simulations are used not only for design verification but, even more importantly, to adjust parameters of the system to have it meet given performance requirements. Unfortunately, accurate simulations are often computationally very expensive with evaluation times as long as hours or even days per design, making design automation using conventional methods impractical. These and other problems can be alleviated by the development and employment of so-called surrogates that reliably represent the expensive, simulation-based model of the system or device of interest but they are much more reasonable and analytically tractable. This volume features surrogate-based modeling and optimization techniques, and their applications for solving difficult and computationally expensive engineering design problems. It begins by presenting the basic concepts and formulations of the surrogate-based modeling and optimization paradigm and then discusses relevant modeling techniques, optimization algorithms and design procedures, as well as state-of-the-art developments. The chapters are self-contained with basic concepts and formulations along with applications and examples. The book will be useful to researchers in engineering and mathematics, in particular those who employ computationally heavy simulations in their design work.

Download or read book Advances in Material Forming written by Francisco Chinesta and published by Springer Science & Business Media. This book was released on 2007-10-27 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book groups the main advances in material forming, considering different processes, both conventional and non-conventional. It focuses on polymers, composites and metals, which are analyzed from the state of the art. Special emphasis is devoted to the contributions of the European Scientific Association for Material Forming (ESAFORM) during the last decade and in particular the ones coming from its annual international conference.