Download or read book SPC and Continuous Improvement written by Mal Owen and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is no doubt that quality has become a major feature in the survival plan of organisations. With diminishing markets resulting from improved competitive performance and the associated factor of single-sourcing arrangements by the major organisations, it is clear that unless there is a commitment to change, organisations will lose their competitive edge. This will unfortunately mean elim ination and the resultant harsh realities that come with it for the employees. It has been said on many platforms that unemployment is not inevitable. Those organisations which recognise the requirements for survival know that quality, and its association with customer satisfaction, is now a key issue. Survival programmes based on quality improvement require an unrelenting com mitment to include everyone, from the Managing Director down, in an ongoing, never-ending involvement based on monitoring, and improving, all our activities. These Total Quality Management (TOM) programmes, whatever their specific nature, have a common theme of measuring and then improving. This text describes the philosophy and techniques of one type of involvement programme-Statistical Process Control (SPC). The material to follow suggests that SPC is a major element of any programme and, if properly applied, could be a complete programme in itself. Measuring and improving means that data must be collected, used, understood, interpreted and analysed, and thereby lies the difficulty.
Download or read book Measuring the Software Process written by William A. Florac and published by Addison-Wesley Professional. This book was released on 1999-07-15 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: "While it is usually helpful to launch improvement programs, many such programs soon get bogged down in detail. They either address the wrong problems, or they keep beating on the same solutions, wondering why things don't improve. This is when you need an objective way to look at the problems. This is the time to get some data." Watts S. Humphrey, from the Foreword This book, drawing on work done at the Software Engineering Institute and other organizations, shows how to use measurements to manage and improve software processes. The authors explain specifically how quality characteristics of software products and processes can be quantified, plotted, and analyzed so the performance of software development activities can be predicted, controlled, and guided to achieve both business and technical goals. The measurement methods presented, based on the principles of statistical quality control, are illuminated by application examples taken from industry. Although many of the methods discussed are applicable to individual projects, the book's primary focus is on the steps software development organizations can take toward broad-reaching, long-term success. The book particularly addresses the needs of software managers and practitioners who have already set up some kind of basic measurement process and are ready to take the next step by collecting and analyzing software data as a basis for making process decisions and predicting process performance. Highlights of the book include: Insight into developing a clear framework for measuring process behavior Discussions of process performance, stability, compliance, capability, and improvement Explanations of what you want to measure (and why) and instructions on how to collect your data Step-by-step guidance on how to get started using statistical process control If you have responsibilities for product quality or process performance and you are ready to use measurements to manage, control, and predict your software processes, this book will be an invaluable resource.
Download or read book Statistical Process Control Quality written by James R. Thompson and published by Chapman and Hall/CRC. This book was released on 1993-04-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Process Control for Managers written by Victor E. Sower and published by Business Expert Press. This book was released on 2014-08-31 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you have been frustrated by very technical statistical process control (SPC) training materials, then this is the book for you. This book focuses on how SPC works and why managers should consider using it in their operations. It provides you with a conceptual understanding of SPC so that appropriate decisions can be made about the benefits of incorporating SPC into the process management and quality improvement processes. Today, there is little need to make the necessary calculations by hand, so the author utilizes Minitab and NWA Quality Analyst—two of the most popular statistical analysis software packages on the market. Links are provided to the home pages of these software packages where trial versions may be downloaded for evaluation and trial use. The book also addresses the question of why SPC should be considered for use, the process of implementing SPC, how to incorporate SPC into problem identification, problem solving, and the management and improvement of processes, products, and services.
Download or read book Statistical Process Control written by Robert James Oakland and published by Routledge. This book was released on 2018-10-08 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The business, commercial and public-sector world has changed dramatically since John Oakland wrote the first edition of Statistical Process Control – a practical guide in the mid-eighties. Then people were rediscovering statistical methods of ‘quality control’ and the book responded to an often desperate need to find out about the techniques and use them on data. Pressure over time from organizations supplying directly to the consumer, typically in the automotive and high technology sectors, forced those in charge of the supplying production and service operations to think more about preventing problems than how to find and fix them. Subsequent editions retained the ‘took kit’ approach of the first but included some of the ‘philosophy’ behind the techniques and their use. The theme which runs throughout the 7th edition is still processes - that require understanding, have variation, must be properly controlled, have a capability, and need improvement - the five sections of this new edition. SPC never has been and never will be simply a ‘took kit’ and in this book the authors provide, not only the instructional guide for the tools, but communicate the management practices which have become so vital to success in organizations throughout the world. The book is supported by the authors' extensive and latest consulting work within thousands of organisations worldwide. Fully updated to include real-life case studies, new research based on client work from an array of industries, and integration with the latest computer methods and Minitab software, the book also retains its valued textbook quality through clear learning objectives and end of chapter discussion questions. It can still serve as a textbook for both student and practicing engineers, scientists, technologists, managers and for anyone wishing to understand or implement modern statistical process control techniques.
Download or read book SPC Methods for Quality Improvement written by C. P. Quesenberry and published by . This book was released on 1997-04 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: SPC METHODS FOR QUALITY IMPROVEMENT A comprehensive, applications-oriented guide to classical and cutting-edge SPC tools and techniques Written by a leading innovator in the field, SPC Methods for Quality Improvement provides a complete blueprint for integrating SPC methods into the manufacturing process. It explains methods for improving existing SPC systems and describes cutting-edge techniques that enable managers to develop full-fledged SPC systems in industries that traditionally were considered off-limits to this type of statistical analysis. The only guide to SPC geared exclusively to the practical concerns of manufacturing professionals, it translates statistical/mathematical concepts into real-world applications with the help of dozens of case studies and examples drawn from a variety of industries. SPC Methods for Quality Improvement is also a superb introductory text for students and newcomers to SPC. The author patiently introduces readers to essential SPC concepts and procedures and provides methodical, step-by-step instruction in the proper use of SPC tools and techniques. In the 1920s and 30s, Walter Shewhart of Bell Telephone Laboratories developed Statistical Process Control (SPC) as a means of analyzing manufacturing processes at the shop-floor level. Shewhart and his disciples—most notably W. Edwards Deming, father of total quality management—realized that SPC provided a sophisticated tool for assessing and improving quality at all levels. SPC, therefore, was the backbone of the quality management revolution of the 1980s and 90s. Yet, until now, there was no comprehensive, practical guide to SPC methods for engineers and managers working in manufacturing. SPC Methods for Quality Improvement fills that vacuum with complete coverage of SPC concepts, tools, and techniques geared to the practical concerns of manufacturing professionals. Dr. Charles Quesenberry introduces all statistical/mathematical essentials and carefully explains the rationale behind each concept. He employs vivid case studies to show how these concepts translate into real-world applications. Using examples drawn from a broad array of industries—from semiconductors to food processing, biomedical engineering to education—he deftly illustrates how SPC methods can streamline the manufacturing process and improve product quality. SPC Methods for Quality Improvement provides detailed, step-by-step guidance on the uses of both classical and second-generation SPC methods. Among cutting-edge methods described are those for charting processes without prior data, charting processes from start-up, and charting short runs with known false alarm rates. Readers also learn methods for studying the form of a reference distribution; how to use transformations to Q-statistics for various models; how to treat data from skewed distributions; and new ways of treating regression, multivariate, and autocorrelated data. An excellent text/primer for students and those new to SPC, SPC Methods for Quality Improvement is also a valuable guide for industrial and production engineers and managers who wish to improve existing SPC systems or to introduce SPC methods into industries where they were once inapplicable.
Download or read book Statistical Process Control in Manufacturing Practice written by Fred W. Kear and published by CRC Press. This book was released on 2020-11-25 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing the importance of understanding and reducing process variation to achieve quality manufacturing performance, this work establishes how statistical process control (SPC) provides powerful tools for measuring and regulating manufacturing processes. It presents information derived from time-tested applications of SPC techniques at on-site process situations in manufacturing. It is designed to assist manufacturing organizations in explaining and implementing successful SPC programmes.
Download or read book Introduction to Statistical Process Control written by Peihua Qiu and published by CRC Press. This book was released on 2013-10-14 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major tool for quality control and management, statistical process control (SPC) monitors sequential processes, such as production lines and Internet traffic, to ensure that they work stably and satisfactorily. Along with covering traditional methods, Introduction to Statistical Process Control describes many recent SPC methods that improve upon
Download or read book Measuring Quality Improvement in Healthcare written by Raymond G. Carey and published by Quality Press. This book was released on 2001-09-25 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ground-breaking book addresses the critical, growing need among health care administrators and practitioners to measure the effectiveness of quality improvement efforts. Written by respected healthcare quality professionals, Measuring Quality Improvement in Healthcare covers practical applications of the tools and techniques of statistical process control (SPC), including control charts, in healthcare settings. The authors' straightforward discussions of data collection, variation, and process improvement set the context for the use and interpretation of control charts. Their approach incorporates "the voice of the customer" as a key element driving the improvement processes and outcomes. The core of the book is a set of 12 case studies that show how to apply statistical thinking to health care process, and when and how to use different types of control charts. The practical, down-to-earth orientation of the book makes it accessible to a wide readership. "Only authors who have used statistics and control charts to solve real-world healthcare problems could have written a book so practical and timely." - Barry S. Bader, Publisher The Quality Letter for Healthcare Leaders "Many clinicians and other healthcare leaders underestimate the great contributions that better statistical thinking could make toward reducing costs and improving outcomes. This fascinating and timely book is a fine guide for getting started." - Donald M. Berwick, M.D. President and CEO, Institute for Healthcare Improvement Associate Professor of Pediatrics, Harvard Medical School Contents: Planning Your CQI Journey, Preparing to Collect Data, Data Collection, Understanding Variation, Using Run and Control Charts to Analyze Process Variation, Control Chart Case Studies, Developing Improvement Strategies, Using Patient Surveys for CQI, Formulas for Calculating Control Limits
Download or read book Building Continual Improvement written by Donald J. Wheeler and published by Spc Press. This book was released on 2001 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Process Control Demystified written by Paul A. Keller and published by McGraw Hill Professional. This book was released on 2011-06-05 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: INCREASE your odds of learning STATISTICAL process control (SPC) Identify and reduce variation in business processes using SPC--the powerful analysis tool for process evaluation and improvement. Statistical Process Control Demystified shows you how to use SPC to enable data-driven decision making and gain a competitive advantage in the marketplace. Written in a step-by-step format, this practical guide explains how to analyze process data, collect data, and determine the suitability of a process in meeting requirements. Attribute and X-bar control charts are discussed, as are charts for individuals data. You'll also get details on process improvement and measurement systems analysis. Detailed examples, calculations, and statistical assumptions make it easy to understand the material, and end-of-chapter quizzes and a final exam help reinforce key concepts. It's a no-brainer! You'll learn about: Control chart interpretation Overcoming common errors in the use of SPC and general statistical analysis tools Sampling requirements Analysis using Excel Estimating process variation Designed experiments Measurement systems analysis, including R&R studies Continuous process improvement strategies Simple enough for a beginner, but challening enough for an advanced student, Statistical Process Control Demystified is your shortcut to this powerful analysis solution.
Download or read book Introduction to Statistical Quality Control written by Douglas C. Montgomery and published by John Wiley & Sons. This book was released on with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is about the use of modern statistical methods for quality control and improvement. It provides comprehensive coverage of the subject from basic principles to state-of-the-art concepts. and applications. The objective is to give the reader a sound understanding of the principles and the basis for applying them in a variety of situations. Although statistical techniques are emphasized. throughout, the book has a strong engineering and management orientation. Extensive knowledge. of statistics is not a prerequisite for using this book. Readers whose background includes a basic course in statistical methods will find much of the material in this book easily accessible"--
Download or read book Statistical Process Control in Automated Manufacturing written by Bert Keats and published by CRC Press. This book was released on 2020-11-26 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to statistical process control in automated manufacturing and suggests implementation strategies. It focuses on time series applications in statistical process control and explores the role of knowledge-based systems in process control.
Download or read book Improving Healthcare with Control Charts written by Raymond G. Carey and published by Quality Press. This book was released on 2003-01-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Do you feel you are drowning in a sea of data and wondering how you can learn from all of this information? While measuring quality efforts in healthcare is essential to the overall performance of any healthcare organization, it is also very complex, leaving many feeling overwhelmed and with a lot of unanswered questions: What are SPC methods and can they really help to improve healthcare? How can control charts be used to monitor key processes and outcomes? How can physicians use control charts to improve their clinical practice? In his latest book, Dr. Raymond Carey answers these questions and more as he helps to explain the need for, and the use of, SPC in healthcare. In Improving Healthcare with Control Charts: Basic and Advanced SPC Methods and Case Studies, Carey expands on his previous best-selling book, Measuring Quality Improvement in Healthcare, by providing more in-depth information on problems commonly experienced in constructing and analyzing control charts. He outlines specific SPC concepts, theories, and methods that will help improve measurement and therefore improve overall performance. Carey also presents many new case studies applying advanced methods and theory to real life healthcare situations.
Download or read book Modular Kaizen written by Grace L. Duffy and published by Quality Press. This book was released on 2013-11-07 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modular Kaizen is a development of necessity. Improvement has to happen on the fly in our rapidly changing world. This book is about using the resources, people, and schedules already in place to get things done. Modular Kaizen is the counterpoint to a kaizen blitz, in which team members are confined in a room to hammer out an opportunity or a solution to some problem. In the hectic, interrupt-driven environment of many organizations, it is simply not possible to remove critical players from normal operations for any length of time. Grace Duffy draws on 40 years of experience to incorporate techniques, innovations, and lessons learned in pursuit of effective continuous and breakthrough improvement. Part I provides the conceptual model along with steps and tools for process and system improvement in an extremely busy and interrupt-driven workplace. Part II offers three case studiesfrom manufacturing, healthcare, and aerospaceto show how the techniques work in real time. If you are looking for proven approaches to integrating quality improvement into daily work, this is your book. It is written for those of us who have to get it done, not just talk about it. So roll up your sleeves and dig in.
Download or read book Statistical Methods for Quality Improvement written by Thomas P. Ryan and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the Second Edition "As a comprehensive statistics reference book for quality improvement, it certainly is one of the best books available." —Technometrics This new edition continues to provide the most current, proven statistical methods for quality control and quality improvement The use of quantitative methods offers numerous benefits in the fields of industry and business, both through identifying existing trouble spots and alerting management and technical personnel to potential problems. Statistical Methods for Quality Improvement, Third Edition guides readers through a broad range of tools and techniques that make it possible to quickly identify and resolve both current and potential trouble spots within almost any manufacturing or nonmanufacturing process. The book provides detailed coverage of the application of control charts, while also exploring critical topics such as regression, design of experiments, and Taguchi methods. In this new edition, the author continues to explain how to combine the many statistical methods explored in the book in order to optimize quality control and improvement. The book has been thoroughly revised and updated to reflect the latest research and practices in statistical methods and quality control, and new features include: Updated coverage of control charts, with newly added tools The latest research on the monitoring of linear profiles and other types of profiles Sections on generalized likelihood ratio charts and the effects of parameter estimation on the properties of CUSUM and EWMA procedures New discussions on design of experiments that include conditional effects and fraction of design space plots New material on Lean Six Sigma and Six Sigma programs and training Incorporating the latest software applications, the author has added coverage on how to use Minitab software to obtain probability limits for attribute charts. new exercises have been added throughout the book, allowing readers to put the latest statistical methods into practice. Updated references are also provided, shedding light on the current literature and providing resources for further study of the topic. Statistical Methods for Quality Improvement, Third Edition is an excellent book for courses on quality control and design of experiments at the upper-undergraduate and graduate levels. the book also serves as a valuable reference for practicing statisticians, engineers, and physical scientists interested in statistical quality improvement.
Download or read book Deming s Road to Continual Improvement written by William W. Scherkenbach and published by Spc Press. This book was released on 1991-01-01 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
