Download or read book Spatial Big Data BIM and advanced GIS for Smart Transformation written by Sara Shirowzhan and published by MDPI. This book was released on 2020-12-02 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a range of topics including selective technologies and algorithms that can potentially contribute to developing an intelligent environment and smarter cities. While the connectivity and efficiency of smart cities is important, the analysis of the impact of construction development and large projects in the city is crucial to decision and policy makers, before the project is approved. This book also presents an agenda for future investigations to address the need for advanced tools such as mobile scanners, Geospatial Artificial Intelligence, Unmanned Aerial Vehicles, Geospatial Augmented Reality apps, Light Detection, and Ranging in smart cities. Some of selected specific tools presented in this book are as a simulator for improving the smart parking practices by modelling drivers with activity plans, a bike optimization algorithm to increase the efficiency of bike stations, an agent-based model simulation of human mobility with the use of mobile phone datasets. In addition, this book describes the use of numerical methods to match the network demand and supply of bicycles, investigate the distribution of railways using different indicators, presents a novel algorithm of direction-aware continuous moving K-nearest neighbor queries in road networks, and presents an efficient staged evacuation planning algorithm for multi-exit buildings.
Download or read book Spatial Big Data BIM and Advanced GIS for Smart Transformation written by Sara Shirowzhan and published by . This book was released on 2020 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a range of topics including selective technologies and algorithms that can potentially contribute to developing an intelligent environment and smarter cities. While the connectivity and efficiency of smart cities is important, the analysis of the impact of construction development and large projects in the city is crucial to decision and policy makers, before the project is approved. This book also presents an agenda for future investigations to address the need for advanced tools such as mobile scanners, Geospatial Artificial Intelligence, Unmanned Aerial Vehicles, Geospatial Augmented Reality apps, Light Detection, and Ranging in smart cities. Some of selected specific tools presented in this book are as a simulator for improving the smart parking practices by modelling drivers with activity plans, a bike optimization algorithm to increase the efficiency of bike stations, an agent-based model simulation of human mobility with the use of mobile phone datasets. In addition, this book describes the use of numerical methods to match the network demand and supply of bicycles, investigate the distribution of railways using different indicators, presents a novel algorithm of direction-aware continuous moving K-nearest neighbor queries in road networks, and presents an efficient staged evacuation planning algorithm for multi-exit buildings.
Download or read book Facets of a Smart City Computational and Experimental Techniques for Sustainable Urban Development written by Pijush Samui and published by Bentham Science Publishers. This book was released on 2022-04-19 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: A smart city uses technology to provide services and solve problems to improve urban policy efficiency, reduce waste, improve quality of life, and maximize social inclusion. By 2050, 66% of the world’s population is expected to be urban, which is a key driver of a global trend toward the creation of smart cities. This trend creates many opportunities for urban planning committees to learn how to design, modernize, and operate smart cities intelligently and effectively. Facets of a Smart City: Computational and Experimental Techniques for Sustainable Urban Development is a collection of topics that are relevant to the design of a smart city. This book aims to complement technical journal articles that require advanced knowledge of the subject of smart cities and applications for readers. It aims to bridge knowledge gaps in sustainable urban design by providing background information via case studies to facilitate students, recent graduates and new practitioners in urban design and planning. Key Features: - This book features 9 chapters that cover 6 major domains, which include (i) information modelling, (ii) internet of things, (iii) intelligent transportation systems, (iv) water supply, (v) waste management and (vi) sustainable environment - Computational techniques are included in the book. These include artificial neural networks, stochastic models, particle swarm optimization, machine learning, and adaptive neuro-fuzzy Inference systems. - Goals of case studies presented in this book use computational techniques to offer readers examples of supervised, unsupervised and reinforcement learning strategies in the context of smart city applications - References are provided for further reading
Download or read book Design of Cities and Buildings written by Samad Sepasgozar and published by BoD – Books on Demand. This book was released on 2021-06-02 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book envisions the most appropriate design strategies that guarantee the adequate environmental performance of buildings during phases of design and construction as well as use. It focuses on relevant issues related to the production of sustainable buildings and the socio-cultural integration aspects of new architectural designs in urban settings. The book also addresses the design features of historic buildings.
Download or read book Big Data Computing for Geospatial Applications written by Zhenlong Li and published by MDPI. This book was released on 2020-11-23 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The convergence of big data and geospatial computing has brought forth challenges and opportunities to Geographic Information Science with regard to geospatial data management, processing, analysis, modeling, and visualization. This book highlights recent advancements in integrating new computing approaches, spatial methods, and data management strategies to tackle geospatial big data challenges and meanwhile demonstrates opportunities for using big data for geospatial applications. Crucial to the advancements highlighted in this book is the integration of computational thinking and spatial thinking and the transformation of abstract ideas and models to concrete data structures and algorithms.
Download or read book Advanced Spatial Analysis written by Paul Longley and published by ESRI, Inc.. This book was released on 2003 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced work on GIS applications in such fields as urban planning, transportation, and economic development
Download or read book Spatial Data Handling in Big Data Era written by Chenghu Zhou and published by Springer. This book was released on 2017-05-04 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume introduces recent work on the storage, retrieval and visualization of spatial Big Data, data-intensive geospatial computing and related data quality issues. Further, it addresses traditional topics such as multi-scale spatial data representations, knowledge discovery, space-time modeling, and geological applications. Spatial analysis and data mining are increasingly facing the challenges of Big Data as more and more types of crowd sourcing spatial data are used in GIScience, such as movement trajectories, cellular phone calls, and social networks. In order to effectively manage these massive data collections, new methods and algorithms are called for. The book highlights state-of-the-art advances in the handling and application of spatial data, especially spatial Big Data, offering a cutting-edge reference guide for graduate students, researchers and practitioners in the field of GIScience.
Download or read book Artificial Intelligence in Performance Driven Design written by Narjes Abbasabadi and published by John Wiley & Sons. This book was released on 2024-05-29 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: ARTIFICIAL INTELLIGENCE IN PERFORMANCE-DRIVEN DESIGN A definitive, interdisciplinary reference to using artificial intelligence technology and data-driven methodologies for sustainable design Artificial Intelligence in Performance-Driven Design: Theories, Methods, and Tools explores the application of artificial intelligence (AI), specifically machine learning (ML), for performance modeling within the built environment. This work develops the theoretical foundations and methodological frameworks for utilizing AI/ML, with an emphasis on multi-scale modeling encompassing energy flows, environmental quality, and human systems. The book examines relevant practices, case studies, and computational tools that harness AI’s capabilities in modeling frameworks, enhancing the efficiency, accuracy, and integration of physics-based simulation, optimization, and automation processes. Furthermore, it highlights the integration of intelligent systems and digital twins throughout the lifecycle of the built environment, to enhance our understanding and management of these complex environments. This book also: Incorporates emerging technologies into practical ideas to improve performance analysis and sustainable design Presents data-driven methodologies and technologies that integrate into modeling and design platforms Shares valuable insights and tools for developing decarbonization pathways in urban buildings Includes contributions from expert researchers and educators across a range of related fields Artificial Intelligence in Performance-Driven Design is ideal for architects, engineers, planners, and researchers involved in sustainable design and the built environment. It’s also of interest to students of architecture, building science and technology, urban design and planning, environmental engineering, and computer science and engineering.
Download or read book Latest Developments in Reality Based 3D Surveying and Modelling written by and published by Mdpi AG. This book was released on 2018-01-18 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book originates from the ISPRS/CIPA Workshop "3D-ARCH 2017 - 3D Virtual Reconstruction and Visualization of Complex Architectures," which was held in March 2017 in Nafplio, Greece. The main workshop's scope was to bring together scientists, developers and advanced users in 3D surveying and data processing and to encourage cooperation and practice sharing in the various fields where 3D technologies are nowadays used. The workshop focused primarily on multi-source and multi-sensors approaches, low-cost sensors and open-source algorithms for terrestrial 3D modelling, automation in data registration, image matching and 3D reconstruction, point cloud analysis, 4D modelling, BIM/HBIM and procedural modelling, accuracy requirement and assessment in 3D reconstructions, 3D applications in terrestrial and underwater environments, Virtual and Augmented Reality (VR/AR) applied to the visualization and conservation of complex architectures and heritage. The most exciting and innovative papers presented at the workshop were selected to be extended and included in this cornerstone collection.
Download or read book Research Companion to Building Information Modeling written by Lu, Weisheng and published by Edward Elgar Publishing. This book was released on 2022-03-22 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering critical insights to the state-of-the-art in Building Information Modeling (BIM) research and development, this book outlines the prospects and challenges for the field in this era of digital revolution. Analysing the contributions of BIM across the construction industry, it provides a comprehensive survey of global BIM practices.
Download or read book Construction 4 0 written by Marco Casini and published by Woodhead Publishing. This book was released on 2021-11-24 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in data acquisition technologies, digital information and analysis, automated construction processes, and advanced materials and products have finally started to move the construction industry - traditionally reluctant to innovation and slow in adopting new technologies - toward a new era. Massive changes are occurring because of the possibilities created by Building information modeling, Extended reality, Internet of Things, Artificial intelligence and Machine Learning, Big data, Nanotechnology, 3D printing, and other advanced technologies, which are strongly interconnected and are driving the capabilities for much more efficient construction at scale. Construction 4.0: Advanced Technology, Tools and Materials for the Digital Transformation of the Construction Industry provides readers with a state-of-the-art review of the ongoing digital transformation of the sector within the new 4.0 framework, presenting a thorough investigation of the emerging trends, technologies, and strategies in the fields of smart building design, construction, and operation and providing a comprehensive guideline on how to exploit the new possibilities offered by the digital revolution. It will be an essential reference resource for academic researchers, material scientists and civil engineers, undergraduate and graduate students, and other professionals working in the field of smart ecoefficient construction and cutting-edge technologies applied to construction. Provides an overview of the Construction 4.0 framework to address the global challenges of the buildingsector in the 21st century and an in-depth analysis of the most advanced digital technologies and systems forthe operation and maintenance of infrastructure, real estate, and other built assets Covers major innovations across the value chain, including building design, fabrication, construction, operationand maintenance, and end-of-life Illustrates the most advanced digital tools and methods to support the building design activity, includinggenerative design, virtual reality, and digital fabrication Presents a thorough review of the most advanced construction materials, building methods, and techniquesfor a new connected and automated construction model Explores the digital transformation for smart energy buildings and their integration with emerging smartgrids and smart cities Reflects upon major findings and identifies emerging market opportunities for the whole AECO sector
Download or read book Advances in 3D Geo Information Sciences written by Thomas H. Kolbe and published by Springer Science & Business Media. This book was released on 2011-03-23 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade developments in 3D Geoinformation have made substantial progress. We are about to have a more complete spatial model and understanding of our planet in different scales. Hence, various communities and cities offer 3D landscape and city models as valuable source and instrument for sustainable management of rural and urban resources. Also municipal utilities, real estate companies etc. benefit from recent developments related to 3D applications. To meet the challenges due to the newest changes academics and practitioners met at the 5th International Workshop on 3D Geoinformation in order to present recent developments and to discuss future trends. This book comprises a selection of evaluated, high quality papers that were presented at this workshop in November 2010. The topics focus explicitly on the last achievements (methods, algorithms, models, systems) with respect to 3D geo-information requirements. The book is aimed at decision makers and experts as well at students interested in the 3D component of geographical information science including GI engineers, computer scientists, photogrammetrists, land surveyors, urban planners, and mapping specialists.
Download or read book Spatial Databases written by Philippe Rigaux and published by Morgan Kaufmann. This book was released on 2002 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors explore and explain current techniques for handling the specialised data that describes geographical phenomena in a study that will be of great value to computer scientists and geographers working with spatial databases.
Download or read book CONVR 2023 Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality written by Pietro Capone and published by Firenze University Press. This book was released on with total page 1279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the overarching theme of “Managing the Digital Transformation of Construction Industry” the 23rd International Conference on Construction Applications of Virtual Reality (CONVR 2023) presented 123 high-quality contributions on the topics of: Virtual and Augmented Reality (VR/AR), Building Information Modeling (BIM), Simulation and Automation, Computer Vision, Data Science, Artificial Intelligence, Linked Data, Semantic Web, Blockchain, Digital Twins, Health & Safety and Construction site management, Green buildings, Occupant-centric design and operation, Internet of Everything. The editors trust that this publication can stimulate and inspire academics, scholars and industry experts in the field, driving innovation, growth and global collaboration among researchers and stakeholders.
Download or read book Smart Cities and Smart Spaces Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2018-09-07 with total page 1707 pages. Available in PDF, EPUB and Kindle. Book excerpt: As populations have continued to grow and expand, many people have made their homes in cities around the globe. With this increase in city living, it is becoming vital to create intelligent urban environments that efficiently support this growth and simultaneously provide friendly and progressive environments to both businesses and citizens alike. Smart Cities and Smart Spaces: Concepts, Methodologies, Tools, and Applications is an innovative reference source that discusses social, economic, and environmental issues surrounding the evolution of smart cities. Highlighting a range of topics such as smart destinations, urban planning, and intelligent communities, this multi-volume book is designed for engineers, architects, facility managers, policymakers, academicians, and researchers interested in expanding their knowledge on the emerging trends and topics involving smart cities.
Download or read book Digital Transformation of the Design Construction and Management Processes of the Built Environment written by Bruno Daniotti and published by Springer Nature. This book was released on 2019-01-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book focuses on the development of methods, interoperable and integrated ICT tools, and survey techniques for optimal management of the building process. The construction sector is facing an increasing demand for major innovations in terms of digital dematerialization and technologies such as the Internet of Things, big data, advanced manufacturing, robotics, 3D printing, blockchain technologies and artificial intelligence. The demand for simplification and transparency in information management and for the rationalization and optimization of very fragmented and splintered processes is a key driver for digitization. The book describes the contribution of the ABC Department of the Polytechnic University of Milan (Politecnico di Milano) to R&D activities regarding methods and ICT tools for the interoperable management of the different phases of the building process, including design, construction, and management. Informative case studies complement the theoretical discussion. The book will be of interest to all stakeholders in the building process - owners, designers, constructors, and faculty managers - as well as the research sector.
Download or read book Heritage Building Information Modelling written by Yusuf Arayici and published by Taylor & Francis. This book was released on 2017-02-10 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Information Modelling (BIM) is being debated, tested and implemented wherever you look across the built environment sector. This book is about Heritage Building Information Modelling (HBIM), which necessarily differs from the commonplace applications of BIM to new construction. Where BIM is being used, the focus is still very much on design and construction. However, its use as an operational and management tool for existing buildings, particularly heritage buildings, is lagging behind. The first of its kind, this book aims to clearly define the scope for HBIM and present cutting-edge research findings alongside international case studies, before outlining challenges for the future of HBIM research and practice. After an extensive introduction to HBIM, the core themes of the book are arranged into four parts: Restoration philosophies in practice Data capture and visualisation for maintenance and repair Building performance Stakeholder engagement This book will be a key reference for built environment practitioners, researchers, academics and students engaged in BIM, HBIM, building energy modelling, building surveying, facilities management and heritage conservation more widely.
