Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Catalytic Processes for Fine and Specialty Chemicals written by Sunil S Joshi and published by Elsevier. This book was released on 2016-04-12 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Catalytic Processes for Fine and Specialty Chemicals provides a comprehensive methodology and state-of-the art toolbox for industrial catalysis. The book begins by introducing the reader to the interesting, challenging, and important field of catalysis and catalytic processes. The fundamentals of catalysis and catalytic processes are fully covered before delving into the important industrial applications of catalysis and catalytic processes, with an emphasis on green and sustainable technologies. Several case studies illustrate new and sustainable ways of designing catalysts and catalytic processes. The intended audience of the book includes researchers in academia and industry, as well as chemical engineers, process development chemists, and technologists working in chemical industries and industrial research laboratories. - Discusses the fundamentals of catalytic processes, catalyst preparation and characterization, and reaction engineering - Outlines the homogeneous catalytic processes as they apply to specialty chemicals - Introduces industrial catalysis and catalytic processes for fine chemicals - Includes a number of case studies to demonstrate the various processes and methods for designing green catalysts

Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2021-06-14 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume looks at modern approaches to catalysis and reviews the extensive literature. Chapters highlight application of 2D materials in biomass conversion catalysis, plasmonic photocatalysis, catalytic demonstration of mesoporosity in the hierarchical zeolite and the effect of surface phase oxides on supported metals and catalysis. Looking to the future a chapter on ab initio machine learning for accelerating catalytic materials discovery is included. Appealing broadly to researchers in academia and industry, these illustrative chapters bridge the gap from academic studies in the laboratory to practical applications in industry not only for catalysis field but also for environmental protection. Other chapters with an industrial perspective include heterogeneous and homogeneous catalytic routes for vinyl acetate synthesis, catalysis for production of jet fuel from renewable sources by HDO/HDC and microwave-assisted catalysis for fuel conversion. Chemical reactions in ball mills is also explored. The book will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.

Download or read book The Role of Catalysis for the Sustainable Production of Bio fuels and Bio chemicals written by Kostas Triantafyllidis and published by Newnes. This book was released on 2013-03-19 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Catalysis for the Sustainable Production of Bio-fuels and Bio-chemicals describes the importance of catalysis for the sustainable production of biofuels and biochemicals, focused primarily on the state-of-the-art catalysts and catalytic processes expected to play a decisive role in the "green" production of fuels and chemicals from biomass. In addition, the book includes general elements regarding the entire chain of biomass production, conversion, environment, economy, and life-cycle assessment. Very few books are available on catalysis in production schemes using biomass or its primary conversion products, such as bio-oil and lignin. This book fills that gap with detailed discussions of: - Catalytic pyrolysis of lignocellulosic biomass - Hybrid biogasoline by co-processing in FCC units - Fischer-Tropsch synthesis to biofuels (biomass-to-liquid process) - Steam reforming of bio-oils to hydrogen With energy prices rapidly rising, environmental concerns growing, and regulatory apparatus evolving, this book is a resource with tutorial, research, and technological value for chemists, chemical engineers, policymakers, and students. - Includes catalytic reaction mechanism schemes and gives a clear understanding of catalytic processes - Includes flow diagrams of bench-, pilot- and industrial-scale catalytic processing units and demonstrates the various process technologies involved, enabling easy selection of the best process - Incorporates many tables, enabling easy comparison of data based on a critical review of the available literature

Download or read book Metal catalysis in Industrial Organic Processes written by Gian Paolo Chiusoli and published by Royal Society of Chemistry. This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: A definitive reference source, written by practising experts in the field, providing detailed and up-to-date information on key aspects of metal catalysis.

Download or read book Catalytic Processes for The Valorisation of Biomass Derived Molecules written by Francesco Mauriello and published by MDPI. This book was released on 2019-11-22 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decades, inedible lignocellulosic biomasses have attracted significant attention for being abundant resources that are not in competition with agricultural land or food production and, therefore, can be used as starting renewable material for the production of a wide variety of platform chemicals. The three main components of lignocellulosic biomasses are cellulose, hemicellulose and lignin, complex biopolymers that can be converted into a pool of platform molecules including sugars, polyols, alchols, ketons, ethers, acids and aromatics. Various technologies have been explored for their one-pot conversion into chemicals, fuels and materials. However, in order to develop new catalytic processes for the selective production of desired products, a complete understanding of the molecular aspects of the basic chemistry and reactivity of biomass derived molecules is still crucial. This Special Issue reports on recent progress and advances in the catalytic valorization of cellulose, hemicellulose and lignin model molecules promoted by novel heterogeneous systems for the production of energy, fuels and chemicals.

Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.

Download or read book Fuel Processing written by Gunther Kolb and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a unique integrated engineering approach, this text covers all aspects of fuel processing: catalysts, reactors, chemical plant components and integrated system design. While providing an introduction to the subject, it also contains recent research developments, making this an invaluable handbook for chemical, power and process engineers, electrochemists, catalytic chemists, materials scientists and engineers in power technology.

Download or read book Supported Metal Single Atom Catalysis written by Philippe Serp and published by Wiley-VCH. This book was released on 2022-02-22 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: b”Supported Metal Single Atom CatalysisCovers all key aspects of supported metal single atom catalysts, an invaluable resource for academic researchers and industry professionals alike Single atom catalysis is one of the most innovative and dynamic research areas in catalysis science. Supported metal catalysts are used extensively across the chemical industry, ranging from fine and bulk chemical production to petrochemicals. Single atom catalysts (SACs) combine the advantages of both homogeneous and heterogeneous catalysts such as catalyst stability, activity, and high dispersion of the active phase. Supported Metal Single Atom Catalysis provides an authoritative and up-to-date overview of the emerging field, covering the synthesis, preparation, characterization, modeling, and applications of SACs. This comprehensive volume introduces the basic principles of single atom catalysis, describes metal oxide and carbon support materials for SAC preparation, presents characterization techniques and theoretical calculations, and discusses SACs in areas including selective hydrogenation, oxidation reactions, activation of small molecules, C-C bond formation, and biomedical applications. Highlights the activity, selectivity, and stability advantages of supported metal SACs compared to other heterogeneous catalysts Covers applications of SACs in thermal catalysis, electrocatalysis, and photocatalysis Includes chapters on single atom alloys and supported double and triple metal atom catalysts Discusses the prospects, challenges, and potential industrial applications of SACs Supported Metal Single Atom Catalysis is an indispensable reference for all those working in the fields of catalysis, solid-state chemistry, materials science, and spectroscopy, including catalytic chemists, organic chemists, electrochemists, theoretical chemists, and industrial chemists.

Download or read book Biomass Conversion written by Chinnappan Baskar and published by Springer Science & Business Media. This book was released on 2012-05-08 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The consumption of petroleum has surged during the 20th century, at least partially because of the rise of the automobile industry. Today, fossil fuels such as coal, oil, and natural gas provide more than three quarters of the world's energy. Unfortunately, the growing demand for fossil fuel resources comes at a time of diminishing reserves of these nonrenewable resources. The worldwide reserves of oil are sufficient to supply energy and chemicals for only about another 40 years, causing widening concerns about rising oil prices. The use of biomass to produce energy is only one form of renewable energy that can be utilized to reduce the impact of energy production and use on the global environment. Biomass can be converted into three main products such as energy, biofuels and fine chemicals using a number of different processes. Today, it is a great challenge for researchers to find new environmentally benign methodology for biomass conversion, which are industrially profitable as well. This book focuses on the conversion of biomass to biofuels, bioenergy and fine chemicals with the interface of biotechnology, microbiology, chemistry and materials science. An international scientific authorship summarizes the state-of-the-art of the current research and gives an outlook on future developments.

Download or read book Zeolites in Industrial Separation and Catalysis written by Santi Kulprathipanja and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to offer a practical overview of zeolites and their commercial applications provides a practical examination of zeolites in three capacities. Edited by a globally recognized and acclaimed leader in the field with contributions from major industry experts, this handbook and ready reference introduces such novel separators as zeolite membranes and mixed matrix membranes. The first part of the book discusses the history and chemistry of zeolites, while the second section focuses on separation processes. The third and final section treats zeolites in the field of catalysis. The three sections are unified by an examination of how the unique properties of zeolites allow them to function in different capacities as an adsorbent, a membrane and as a catalyst, while also discussing their impact within the industry.

Download or read book CO2 Hydrogenation Catalysis written by Yuichiro Himeda and published by John Wiley & Sons. This book was released on 2021-06-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the effective catalysts and latest advances in CO2 conversion in chemicals and fuels Carbon dioxide hydrogenation is one of the most promising and economic techniques to utilize CO2 emissions to produce value-added chemicals. With contributions from an international team of experts on the topic, CO2 Hydrogenation Catalysis offers a comprehensive review of the most recent developments in the catalytic hydrogenation of carbon dioxide to formic acid/formate, methanol, methane, and C2+ products. The book explores the electroreduction of carbon dioxide and contains an overview on hydrogen production from formic acid and methanol. With a practical review of the advances and challenges in future CO2 hydrogenation research, the book provides an important guide for researchers in academia and industry working in the field of catalysis, organometallic chemistry, green and sustainable chemistry, as well as energy conversion and storage. This important book: Offers a unique review of effective catalysts and the latest advances in CO2 conversion Explores how to utilize CO2 emissions to produce value-added chemicals and fuels such as methanol, olefins, gasoline, aromatics Includes the latest research in homogeneous and heterogeneous catalysis as well as electrocatalysis Highlights advances and challenges for future investigation Written for chemists, catalytic chemists, electrochemists, chemists in industry, and chemical engineers, CO2 Hydrogenation Catalysis offers a comprehensive resource to understanding how CO2 emissions can create value-added chemicals.

Download or read book The Development of Catalysis written by Adriano Zecchina and published by John Wiley & Sons. This book was released on 2017-04-03 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gradually brings the reader, through illustrations of the most crucial discoveries, into the modern world of chemical catalysis. Readers and experts will better understand the enormous influence that catalysis has given to the development of modern societies. • Highlights the field's onset up to its modern days, covering the life and achievements of luminaries of the catalytic era • Appeals to general audience in interpretation and analysis, but preserves the precision and clarity of a scientific approach • Fills the gap in publications that cover the history of specific catalytic processes

Download or read book New Materials for Catalytic Applications written by Vasile I. Parvulescu and published by Elsevier. This book was released on 2016-01-28 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials for Catalytic Applications proposes the use of both new and existing materials for catalytic applications, such as zeolites, metal oxides, microporous and mesoporous materials, and monocrystals. In addition, metal-oxides are discussed from a new perspective, i.e. nano- and photocatalytic applications. The material presents these concepts with a new focus on strategies in synthesis, synthesis based on a rational design, the correlation between basic properties/potential applications, and new catalytic solutions for acid-base, redox, hydrogenation, photocatalytic reactions, etc. - Presents organometallic concepts for the synthesis of nanocatalysts - Provides a synthesis of new materials following the fluorolytic sol-gel concept - Covers electronic and photocatalytic properties via synthesis of nano-oxide materials - Details the nature of sites in MOFs generating catalytic properties immobilization of triflates in solid matrices for organic reactions

Download or read book Green Photocatalytic Semiconductors written by Seema Garg and published by Springer Nature. This book was released on 2021-09-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a detailed overview on the role of photocatalysts for environmental remediation, hydrogen production and carbon dioxide reduction. Effective ways to enhance the photocatalytic activity of the material via doping, hybrid material, laser light and nanocomposites have been discussed in this book. The book also further elaborates the role of metal nanoparticles, rare earth doping, sensitizers, surface oxygen vacancy, interface engineering and band gap engineering for enhancing the photocatalytic activity. An approach to recover the photocatalytic material via immobilization is also presented. This book brings to light much of the recent research in the development of such semiconductor photocatalytic systems. The book will thus be of relevance to researchers in the field of: material science, environmental science & technology, photocatalytic applications, newer methods of energy generation & conversion and industrial applications.

Download or read book Mesoporous Zeolites written by Javier García-Martínez and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by a top-level team of both academic and industrial researchers in the field, this is an up-to-date review of mesoporous zeolites. The leading experts cover novel preparation methods that allow for a purpose-oriented fine-tuning of zeolite properties, as well as the related materials, discussing the specific characterization methods and the applications in close relation to each individual preparation approach. The result is a self-contained treatment of the different classes of mesoporous zeolites. With its academic insights and practical relevance this is a comprehensive handbook for researchers in the field and related areas, as well as for developers from the chemical industry.