Download or read book Mixture Formation in Spark Ignition Engines written by Hans Peter Lenz and published by Springer. This book was released on 2013-11-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twentyfour years have gone by since the publication of K. Lohner and H. Muller's comprehen sive work "Gemischbildung und Verbrennung im Ottomotor" in 1967 [1.1]' Naturally, the field of mixture formation and combustion in the spark-ignition engine has wit nessed great technological advances and many new findings in the intervening years, so that the time seemed ripe for presenting a summary of recent research and developments. There fore, I gladly took up the suggestion of the editors of this series of books, Professor Dr. H. List and Professor Dr. A. Pischinger, to write a book summarizing the present state of the art. A center of activity of the Institute of Internal-Combustion Engines and Automotive Engineering at the Vienna Technical University, which I am heading, is the field of mixture formation -there fore, many new results that have been achieved in this area in collaboration with the respective industry have been included in this volume. The basic principles of combustion are discussed only to that extent which seemect necessary for an understanding of the effects of mixture formation. The focal point of this volume is the mixture formation in spark-ignition engines, covering both the theory and actual design of the mixture formation units and appropriate intake manifolds. Also, the related measurement technology is explained in this work.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Modelling Spark Ignition Combustion written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography on Ignition and Spark ignition Systems written by George Frederick Blackburn and published by . This book was released on 1963 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ignition written by Jonathan Isham and published by Island Press. This book was released on 2012-09-26 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evidence is irrefutable: global warming is real. While the debate continues about just how much damage spiking temperatures will wreak, we know the threat to our homes, health, and even way of life is dire. So why isn’t America doing anything? Where is the national campaign to stop this catastrophe? It may lie between the covers of this book. Ignition brings together some of the world’s finest thinkers and advocates to jump start the ultimate green revolution. Including celebrated writers like Bill McKibben and renowned scholars like Gus Speth, as well as young activists, the authors draw on direct experience in grassroots organization, education, law, and social leadership. Their approaches are various, from building coalitions to win political battles to rallying shareholders to change corporate behavior. But they share a belief that private fears about deadly heat waves and disastrous hurricanes can translate into powerful public action. For anyone who feels compelled to do more than change their light bulbs or occasionally carpool, Ignition is an essential guide. Combining incisive essays with success stories and web resources, the book helps readers answer the most important question we all face: “What can I do?”
Download or read book Computer Simulation Of Spark Ignition Engine Processes written by V. Ganesan and published by Universities Press. This book was released on 1996 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the theory and computer programs for the simulation of spark ignition (SI) engine processes. It starts with the fundamental concepts and goes on to the advanced level and can thus be used by undergraduates, postgraduates and Ph. D. scholars.
Download or read book Ignition Systems for Gasoline Engines written by Michael Günther and published by Springer. This book was released on 2016-11-18 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes selected and reviewed papers from the 3rd Conference on Ignition Systems for Gasoline Engines in Berlin in November 2016. Experts from industry and universities discuss in their papers the challenges to ignition systems in providing reliable, precise ignition in the light of a wide spread in mixture quality, high exhaust gas recirculation rates and high cylinder pressures. Classic spark plug ignition as well as alternative ignition systems are assessed, the ignition system being one of the key technologies to further optimizing the gasoline engine.
Download or read book Principles of Electric Spark Ignition in Internal Combustion Engines written by John David Morgan and published by . This book was released on 1920 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Injection Technologies and Mixture Formation Strategies For Spark Ignition and Dual Fuel Engines written by Alessandro Ferrari and published by SAE International. This book was released on 2022-06-24 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel injection systems and performance is fundamental to combustion engine performance in terms of power, noise, efficiency, and exhaust emissions. There is a move toward electric vehicles (EVs) to reduce carbon emissions, but this is unlikely to be a rapid transition, in part due to EV batteries: their size, cost, longevity, and charging capabilities as well as the scarcity of materials to produce them. Until these isssues are resolved, refining the spark-ignited engine is necessary address both sustainability and demand for affordable and reliable mobility. Even under policies oriented to smart sustainable mobility, spark-ignited engines remain strategic, because they can be applied to hybridized EVs or can be fueled with gasoline blended with bioethanol or bio-butanol to drastically reduce particulate matter emissions of direct injection engines in addition to lower CO2 emissions. In this book, Alessandro Ferrari and Pietro Pizzo provide a full review of spark-ignited engine fuel injection systems. The most popular typologies of fuel injection systems are considered, with special focus on state-of-the-art solutions. Dedicated sections on the methods for air mass evaluation, fuel delivery low-pressure modules, and the specific subsystems for idle, cold start, and warm-up control are also included. The authors pay special attention to mixture formation strategies, as they are a fundamental theme for SI engines. An exhaustive overview of fuel injection technologies is provided, and mixture formation strategies for spark ignited combustion engines are considered. Fuel Injection Systems illustrates the performance of these systems and will also serve as a reference for engineers who are active in the aftermarket, offering detailed information on fuel injection system solutions that are mounted in older vehicles.
Download or read book Fuel Economy written by John C. Hilliard and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern about the reduced availability and the increased cost of petroleum fuels prompted great efforts in recent years to reduce the fuel consumption of auto mobiles. The ongoing efforts to reduce fuel consumption have addressed many relevant factors, including increased engine performance, reduced friction, use of lightweight materials, and reduced aerodynamic drag. The results of the investigations assessing the various factors affecting fuel economy have been published in journals, conference proceedings, and in company and government reports. This proliferation of technical information makes it difficult for workers to keep abreast of aU developments. The material presented in this book brings together in a single volume much of the relevant materials, summarizes many of the state-of-the-art theories and data, and provides extensive lists of references. Thus, it is hoped that this book will be a useful reference for specialists and practicing engineers interested in the fuel economy of automobiles. J. C. HILLIARD o. S. SPRINGER vii CONTENTS 1. AUTOMOTIVE FUEL ECONOMY David Cole I. Introduction and Background. . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . n. Fuel Economy Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 A. Engine................................................... 11 B. Drive Train. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 . . . . . . . . . . . . . . C. Vehicle Factors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 . . . . . . . . . . . . . D. Operating Factors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . . . . . . . . . . . . E. Test Cycles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 . . . . . . . . . . . . . . References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 . . . . . . . . . . . . . . . . . 2. FUEL ECONOMY AND EMISSIONS J. T. Kummer I. Introduction .................................................. . 35 n. Emission Regulations .......................................... .
Download or read book Automotive Spark Ignited Direct Injection Gasoline Engines written by F. Zhao and published by Elsevier. This book was released on 2000-02-08 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.
Download or read book Automotive Ignition Systems Explained General Motors written by Mandy Concepcion and published by Mandy Concepcion. This book was released on 2011-10-06 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: AUTOMOTIVE IGNITION SYSTEMS EXPLAINED - GM (General Motors Ignition Systems) By MANDY CONCEPCION This book, concentrates on testing procedures and techniques dealing specifically with General Motors family of vehicles (Chevy, Buick, Pontiac, Old, Cadillac, GMC). The book provides specific operational characteristics or how the system works, as well as how to test them. Special care is given to present the procedures without the use of expensive equipment and tools. Often times with just a test light and multi-meter. Here we cover most of GM's previous and current ignition systems. The first section presents the principles and inner workings of modern diagnostic systems from a generalized perspective for those of you not familiar with the subject. Careful attention is given to expose all major systems from distributor based to COP or distributorless ignition. The other subsequent sections concentrate on GM specific procedures. This book is a great companion for those of you wanting to learn more about the subject of automotive ignition systems, for both professional and DIY technicians, auto-tech students and instructors wanting to use material for in-class training. It is also a deal reference work for on-the-job ignition testing. All sections have been updated to reflect modern state of technology, since all out books are periodically updated as technology changes. With that in mind, enjoy your readings. Table of Contents * - Basics of Modern Automotive Ignition Systems (Basic facts and information on ignition systems.) * - The Mechanical Ignition System (Explains the basics of a mechanical ignition systems, the coil high voltage generation, the job of the Platinum points, as well as ignition coil induction process.) * - The ignition switch (The Distributor, Ignition Coil, Ignition Timing, Ignition Wires, Spark Plugs (Covers basic and advanced concepts on these components.) * - The Electronic Ignition System (Covering pick-up coils, speed sensors, relluctor tone rings, switching of the ignition coil and voltage level developed in newer systems.) * - The Distributorless Ignition system (distributorless ignition and how to follow its circuit, operation and testing.) * - GM H.E.I. (Even though it's an older system, there're plenty of these systems around and make for a primer on electronic ignition.) * - General Motors Ignition Cassette System (Learn to test these systems in detail.) * - GM Compression Sense Ignition (CSI enables the Powertrain Control Module to determine proper engine phasing (cam position) without the use of a separate camshaft position sensor.) * - Testing GM Ignition Control System on 4.3L, 5.0L and 5.7L (diagnose and test a BAD Ignition Control Module and Ignition Coil for the 4.3L, 5.0L and 5.7L engine family.) * - Testing the Ignition Control System on a QUAD-4 (GM 2.4L) (With this test, you'll be able to pinpoint the problem to the Ignition Control Module (ICM) or the Crankshaft Position Sensor (7X CKP Sensor).) * - Testing Ignition Control System on a GM 3.1L, 3.4L (This section will help you test the Ignition Control Module (ICM) and 3X, 7X Crankshaft Position (CKP) Sensor on all of the GM 3.1L and 3.4L overhead valve engines.) * - Testing GM COP Ignition Systems on GM 4.8L, 5.3L, 6.0L and 8.1L (Every step is explained in plain English and with photos to guide you every step of the way. Also, all tests are ON CAR tests and done without a Scan Tool.)
Download or read book Introduction to Internal Combustion Engines written by Richard Stone and published by Bloomsbury Publishing. This book was released on 2017-09-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fourth edition, this textbook remains the indispensable text to guide readers through automotive or mechanical engineering, both at university and beyond. Thoroughly updated, clear, comprehensive and well-illustrated, with a wealth of worked examples and problems, its combination of theory and applied practice aids in the understanding of internal combustion engines, from thermodynamics and combustion to fluid mechanics and materials science. This textbook is aimed at third year undergraduate or postgraduate students on mechanical or automotive engineering degrees. New to this Edition: - Fully updated for changes in technology in this fast-moving area - New material on direct injection spark engines, supercharging and renewable fuels - Solutions manual online for lecturers
Download or read book History and Future of Spark Ignition Engines written by Library of Congress. Environmental Policy Division and published by . This book was released on 1973 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book History and Future of Spark Ignition Engines written by Library of Congress. Environmental Policy Division and published by . This book was released on 1973 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Armor written by and published by . This book was released on 1960 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Kinetics in Combustion and Reactive Flows Modeling Tools and Applications written by V. I. Naoumov and published by Cambridge University Press. This book was released on 2019-08-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces advanced mathematical tools for the modeling, simulation, and analysis of chemical non-equilibrium phenomena in combustion and flows, following a detailed explanation of the basics of thermodynamics and chemical kinetics of reactive mixtures. Researchers, practitioners, lecturers, and graduate students will find this work valuable.
