Download or read book Source Identification of Acoustic Emission During Plastic Deformation and Fracture written by Richard Dale Bunch and published by . This book was released on 1977 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Download or read book Acoustic Emission written by Valentyn Skalskyi and published by Springer Nature. This book was released on 2022-08-20 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents topical theoretical and experimental studies for developing advanced methods of detecting materials fracture and assessing their structural state using acoustic emission. It introduces new mathematical models characterizing the displacement fields arising from crack-like defects and establishes a new criterion for classifying different types of materials fracture based on specific parameters obtained from wavelet transforms of acoustic emission signals. The book applies this approach to experimental studies in three types of materials—fiber-reinforced composites, dental materials, and hydrogen-embrittled steels.
Download or read book Acoustic Emission Testing written by Christian U. Grosse and published by Springer Science & Business Media. This book was released on 2008-07-12 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustic Emission (AE) techniques have been studied in civil engineering for a long time. The techniques are recently going to be more and more applied to practical applications and to be standardized in the codes. This is because the increase of aging structures and disastrous damages due to recent earthquakes urgently demand for maintenance and retrofit of civil structures in service for example. It results in the need for the development of advanced and effective inspection techniques. Thus, AE techniques draw a great attention to diagnostic applications and in material testing. The book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes.
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 22 (thesis year 1977) a total of 10,658 theses titles from 28 Canadian and 227 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 22 reports theses submitted in 1977, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Proceedings of the International Conference on Information Engineering Management and Security 2015 written by Vignesh Ramakrishnan and published by Association of Scientists, Developers and Faculties (ASDF). This book was released on 2015-08-13 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICIEMS 2015 is the conference aim is to provide a platform for researchers, engineers, academicians as well as industrial professionals from all over the world to present their research results and development activities in Engineering Technology, Industrial Engineering, Application Level Security and Management Science. This conference provides opportunities for the delegates to exchange new ideas and application experiences face to face, to establish business or research relations and to find global partners for future collaboration.
Download or read book Acoustic Emission written by R. G. Liptai and published by ASTM International. This book was released on 1972 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic Emission written by Zinoviy Nazarchuk and published by Springer. This book was released on 2017-01-23 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph analyses in detail the physical aspects of the elastic waves radiation during deformation or fracture of materials. It presents the methodological bases for the practical use of acoustic emission device, and describes the results of theoretical and experimental researches of evaluation of the crack growth resistance of materials, selection of the useful AE signals. The efficiency of this methodology is shown through the diagnostics of various-purpose industrial objects. The authors obtain results of experimental researches with the help of the new methods and facilities.
Download or read book Acoustic Emission written by Sotirios J. Vahaviolos and published by ASTM International. This book was released on 1972 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Acoustic Emission written by and published by . This book was released on 1996 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NETLAB written by Ian Nabney and published by Springer Science & Business Media. This book was released on 2002 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Getting the most out of neural networks and related data modelling techniques is the purpose of this book. The text, with the accompanying Netlab toolbox, provides all the necessary tools and knowledge. Throughout, the emphasis is on methods that are relevant to the practical application of neural networks to pattern analysis problems. All parts of the toolbox interact in a coherent way, and implementations and descriptions of standard statistical techniques are provided so that they can be used as benchmarks against which more sophisticated algorithms can be evaluated. Plenty of examples and demonstration programs illustrate the theory and help the reader understand the algorithms and how to apply them.
Download or read book Acoustic Emission written by James R. Matthews and published by CRC Press. This book was released on 1983 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Methods for Material Property Determination written by C.O. Ruud and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in materials property determination by nondestructive means is increasing especially for in-process and in-service inspection of structural and electronic materials and components. Such attention is due to several factors, including increased automation of manufacturing processes, the demand for greater reliability in consumer products and military hardware, and more severe demands on the performance of materials. This book represents the proceedings for the Symposium on Nondestructive Hethods for Haterial Property Determination held April 6 to 8, 1983, at the Hotel Hershey in Hershey, Pennsylvania. That symposium was one of the first meetings concerned specifically with nondestructive material property determination (characteriza tion). Its purpose was to stimulate intercourse between researchers, engineers, and theoreticians so as to focus upon the multidiseiplinary problems of advancing the state of the art in this area. The papers in the book are concerned mainly with acoustic (including ultrasonic), magnetic, electrical, and x-ray diffraction techniques and applications. Hany of the papers describe well developed technologies that are currently in practical application, while others discuss concepts which will never emerge from the laboratory but perhaps will provide the groundwork for more practical ideas.
Download or read book Marine Propellers and Propulsion written by John Carlton and published by Butterworth-Heinemann. This book was released on 2018-11-30 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Propellers and Propulsion, Fourth Edition, offers comprehensive, cutting edge coverage to equip marine engineers, naval architects or anyone involved in propulsion and hydrodynamics with essential job knowledge. Propulsion technology is a complex, multidisciplinary topic with design, construction, operational and research implications. Drawing on experience from a long and varied career in consulting, research, design and technical investigation, John Carlton examines hydrodynamic theory, materials and mechanical considerations, and design, operation and performance. Connecting essential theory to practical problems in design, analysis and operational efficiency, the book is an invaluable resource, packed with hard-won insights, detailed specifications and data. - Features comprehensive coverage of marine propellers, fully updated and revised, with new chapters on propulsion in ice and high speed propellers - Includes enhanced content on full-scale trials, propeller materials, propeller blade vibration, operational problems and much more - Synthesizes otherwise disparate material on the theory and practice of propulsion technology from the past 40 years' development, including the latest developments in improving efficiency - Written by a leading expert on propeller technology, essential for students, marine engineers and naval architects involved in propulsion and hydrodynamics
Download or read book Acoustic Emission Monitoring of Pressurized Systems written by and published by ASTM International. This book was released on 1979 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Handbook of Advanced Materials Testing written by Louise Ferrante and published by CRC Press. This book was released on 1994-11-29 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work discusses techniques for developing new engineering materials such as elastomers, plastic blends, composites, ceramics and high-temperature alloys. Instrumentation for evaluating their properties and identifying potential end uses are presented.;The book is intended for materials, manufacturing, mechanical, chemical and metallurgical engi
