Download or read book Some Power Electronics Case Studies Using Matlab Simpowersystem Blockset written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2021-04-19 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Matlab SimPowerSystems is a modern design tool that allows scientists and engineers to rapidly and easily build models that simulate power systems. Not only can you draw the circuit topology rapidly, but your analysis of the circuit can include interactions with mechanical, thermal, control, and other disciplines. The paper covers some case studies that provide detailed, realistic examples of how to use SimPowerSystems in power system analysis. The following types of studies are covered on the paper: 1. Thyristor-Based Static Var Compensator: Study the steady-state and dynamic performance of a static var compensator (SVC) on a transmission system. 2. Transient Stability of a Power System with SVC and PSS: Study of the application of static var compensator (SVC) and power system stabilizers (PSS) to improve transient stability and power oscillation damping of the system. 3. GTO-Based STATCOM: Study the steady-state and dynamic performance of a static synchronous compensator (STATCOM) on a transmission system. 4. Control of load flow using UPFC: Study the steady-state and dynamic performance of a unified power flow controller (UPFC). 5. Variable-frequency Induction Motor Drive: Study of a PWM inverter is used as a variable-voltage, variable-frequency source to drive an induction motor in variable-speed operation. 6. Chopper-Fed DC Motor Drive: Study of a DC motor drive with armature voltage controlled by a GTO thyristor chopper. 7. VSC-Based HVDC Link: Modeling of a forced-commutated voltage-sourced converter high-voltage direct current (VSC-HVDC) transmission link.

Download or read book Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2020-06-19 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Matlab SimPowerSystems is a modern design tool that allows scientists and engineers to rapidly and easily build models that simulate power systems. Not only can you draw the circuit topology rapidly, but your analysis of the circuit can include interactions with mechanical, thermal, control, and other disciplines. The paper covers some case studies that provide detailed, realistic examples of how to use SimPowerSystems in power system analysis. The following types of studies are covered on the paper:1. Thyristor-Based Static Var Compensator: Study the steady-state and dynamic performance of a static var compensator (SVC) on a transmission system.2. Transient Stability of a Power System with SVC and PSS: Study of the application of static var compensator (SVC) and power system stabilizers (PSS) to improve transient stability and power oscillation damping of the system. 3. GTO-Based STATCOM: Study the steady-state and dynamic performance of a static synchronous compensator (STATCOM) on a transmission system. 4. Control of load flow using UPFC: Study the steady-state and dynamic performance of a unified power flow controller (UPFC).5. Variable-frequency Induction Motor Drive: Study of a PWM inverter is used as a variable-voltage, variable-frequency source to drive an induction motor in variable-speed operation.6. Chopper-Fed DC Motor Drive: Study of a DC motor drive with armature voltage controlled by a GTO thyristor chopper.7. VSC-Based HVDC Link: Modeling of a forced-commutated voltage-sourced converter high-voltage direct current (VSC-HVDC) transmission link.

Download or read book Simulation of Some Power System Control System and Power Electronics Case Studies Using Matlab and PowerWorld Simulator written by Dr. Hedaya Mahmood Alasooly and published by BookRix. This book was released on 2021-01-11 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists from three parts concerning simulation of some power system, control system and power electronics case studies using matlab and powerworld simulator programs • Part A: Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset: • Part B: Control of DC Motor Using Different Control Strategies in Matlab: • Part C: Investigation of the Usefulness of the PowerWorld Simulator Program Developed by “Glover, Overbye & Sarma” in the Solution of Power System Problems: I. Part A: Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset: This part covers some case studies that provide detailed, realistic examples of how to use SimPowerSystems in modeling power system dynamics in various types of application that use power electronics converters. The following case studies are simulated on the paper: 1- Thyristor-Based Static Var Compensator. 2. Transient Stability of a Power System with SVC and PSS. 3. GTO-Based STATCOM. 4. Control of load flow using UPFC. 5- Control of AC motor. 6- Control of DC motor. 7- VSC-Based HVDC Link. II. Part B: Control of DC Motor Using Different Control Strategies in Matlab: A simple model of a DC motor driving an inertial load has the angular speed of the load, , as the output and applied voltage, , as the input. The system was used as an example in [1]. The ultimate goal of this paper is to control the angular rate by varying the applied voltage using different control strategies for comparison purpose. The comparision is made between the proptional controller, integral controller, propotional and integral controller, phase lag compensator, derivitive controller, lead integral compensator, lead lag compensator, PID controller and the the linear quadratic tracker design based on the optimal control theory. III. Part C: Investigation of the Usefulness of the PowerWorld Simulator Program Developed by “Glover, Overbye & Sarma” in the Solution of Power System Problems: The objective of this part is to investigate the usefulness of the power system simulator PowerWorld program developed by “Glover, Overbye &Sarma”. The results obtained from the power simulator program were presented for different case studies. The power system network used in this study consists from 6 buses. Area 1 includes bus 1-5 while Bus 6 will be part of Area 1 in some case studies, or will form separate area 2 in other case studies for comparison purpose. Note that the Available Transfer Capability (ATC) analysis add-on which determines the maximum MW transfer possible between two parts of a power system without violating any limits, and the voltage adequacy and stability tool (VAST) add-on that can solve multiple power flow solutions in order to generate a PV curve for a particular transfer or a QV curve at a given bus, was not studied here because we don’t have yet VAST add-on and the ATC add-on packages.

Download or read book Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset written by Dr. Hidaia Mahmood Alassouli Alassouli (author) and published by . This book was released on 1901 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation of Some Power System Control System and Power Electronics Case Studies Using Matlab and PowerWorld Simulator Programs written by Hedaia Mahmood Al-Assouli and published by . This book was released on 2020-12-25 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists from three parts concerning simulation of some power system, control system and power electronics case studies using matlab and powerworld simulator programs - Part A: Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset: - Part B: Control of DC Motor Using Different Control Strategies in Matlab: - Part C: Investigation of the Usefulness of the PowerWorld Simulator Program Developed by "Glover, Overbye & Sarma" in the Solution of Power System Problems: I. Part A: Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset: This part covers some case studies that provide detailed, realistic examples of how to use SimPowerSystems in modeling power system dynamics in various types of application that use power electronics converters. The following case studies are simulated on the paper: 1- Thyristor-Based Static Var Compensator. 2. Transient Stability of a Power System with SVC and PSS. 3. GTO-Based STATCOM. 4. Control of load flow using UPFC. 5- Control of AC motor. 6- Control of DC motor. 7- VSC-Based HVDC Link. II. Part B: Control of DC Motor Using Different Control Strategies in Matlab: A simple model of a DC motor driving an inertial load has the angular speed of the load, as the output and applied voltage, as the input. The system was used as an example in [1]. The ultimate goal of this paper is to control the angular rate by varying the applied voltage using different control strategies for comparison purpose. The comparision is made between the proptional controller, integral controller, propotional and integral controller, phase lag compensator, derivitive controller, lead integral compensator, lead lag compensator, PID controller and the the linear quadratic tracker design based on the optimal control theory. III. Part C: Investigation of the Usefulness of the PowerWorld Simulator Program Developed by "Glover, Overbye & Sarma" in the Solution of Power System Problems: The objective of this part is to investigate the usefulness of the power system simulator PowerWorld program developed by "Glover, Overbye &Sarma". The results obtained from the power simulator program were presented for different case studies. The power system network used in this study consists from 6 buses. Area 1 includes bus 1-5 while Bus 6 will be part of Area 1 in some case studies, or will form separate area 2 in other case studies for comparison purpose.

Download or read book Simulation of Some Power Electronics Case Studies In Matlab Simpowersystem Toolbox written by Dr. Hidaia Mahmood Alassouli and published by Lulu.com. This book was released on with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Voltage Stability of Electric Power Systems written by Thierry van Cutsem and published by Springer Science & Business Media. This book was released on 2007-10-12 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Voltage Stability is a relatively recent and challenging problem in Power Systems Engineering. It is gaining in importance as the trend of operating power systems closer to their limits continues to increase. Voltage Stability of Electric Power Systems presents a clear description of voltage instability and collapse phenomena. It proposes a uniform and coherent theoretical framework for analysis and covers state-of-the-art methods. The book describes practical methods that can be used for voltage security assessment and offers a variety of examples.

Download or read book Power Electronics and Renewable Energy Systems written by C. Kamalakannan and published by Springer. This book was released on 2014-11-19 with total page 1546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of high-quality peer-reviewed research papers presented in the Proceedings of International Conference on Power Electronics and Renewable Energy Systems (ICPERES 2014) held at Rajalakshmi Engineering College, Chennai, India. These research papers provide the latest developments in the broad area of Power Electronics and Renewable Energy. The book discusses wide variety of industrial, engineering and scientific applications of the emerging techniques. It presents invited papers from the inventors/originators of new applications and advanced technologies.

Download or read book Modern Power Electronics and AC Drives written by Bimal K. Bose and published by Prentice Hall. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;A clear understanding of power electronics and AC drives is crucially important in a wide range of modern systems, from household appliances to automated factories and it requires cross-disciplinary expertise that many engineers lack. Now, in Modern Power Electronics and AC Drives, one of the world's leading experts covers every aspect of the topic, including crucial innovations such as artificial intelligence, advanced estimation, and sensorless control. This book is not only important as an advanced reference but also covers the material for one senior-level and two graduate-level courses."--BOOK JACKET.

Download or read book Innovations in Electrical and Electronic Engineering written by Saad Mekhilef and published by Springer Nature. This book was released on 2021-05-24 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 2021 International Conference on Electrical and Electronics Engineering (ICEEE 2020), held on January 2–3, 2021. The book focuses on the current developments in various fields of electrical and electronics engineering, such as power generation, transmission and distribution; renewable energy sources and technologies; power electronics and applications; robotics; artificial intelligence and IoT; control, automation and instrumentation; electronics devices, circuits and systems; wireless and optical communication; RF and microwaves; VLSI; and signal processing. The book is a valuable resource for academics and industry professionals alike.

Download or read book Power Quality in Power Systems and Electrical Machines written by Ewald F. Fuchs and published by Academic Press. This book was released on 2015-07-14 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this must-have reference covers power quality issues in four parts, including new discussions related to renewable energy systems. The first part of the book provides background on causes, effects, standards, and measurements of power quality and harmonics. Once the basics are established the authors move on to harmonic modeling of power systems, including components and apparatus (electric machines). The final part of the book is devoted to power quality mitigation approaches and devices, and the fourth part extends the analysis to power quality solutions for renewable energy systems. Throughout the book worked examples and exercises provide practical applications, and tables, charts, and graphs offer useful data for the modeling and analysis of power quality issues. - Provides theoretical and practical insight into power quality problems of electric machines and systems - 134 practical application (example) problems with solutions - 125 problems at the end of chapters dealing with practical applications - 924 references, mostly journal articles and conference papers, as well as national and international standards and guidelines

Download or read book Applications of Chaos and Nonlinear Dynamics in Engineering written by Santo Banerjee and published by Springer Science & Business Media. This book was released on 2011-09-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chaos and nonlinear dynamics initially developed as a new emergent field with its foundation in physics and applied mathematics. The highly generic, interdisciplinary quality of the insights gained in the last few decades has spawned myriad applications in almost all branches of science and technology—and even well beyond. Wherever quantitative modeling and analysis of complex, nonlinear phenomena is required, chaos theory and its methods can play a key role. This volume concentrates on reviewing the most relevant contemporary applications of chaotic nonlinear systems as they apply to the various cutting-edge branches of engineering. The book covers the theory as applied to robotics, electronic and communication engineering (for example chaos synchronization and cryptography) as well as to civil and mechanical engineering, where its use in damage monitoring and control is explored). Featuring contributions from active and leading research groups, this collection is ideal both as a reference and as a ‘recipe book’ full of tried and tested, successful engineering applications

Download or read book Power System State Estimation written by Ali Abur and published by CRC Press. This book was released on 2004-03-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering an up-to-date account of the strategies utilized in state estimation of electric power systems, this text provides a broad overview of power system operation and the role of state estimation in overall energy management. It uses an abundance of examples, models, tables, and guidelines to clearly examine new aspects of state estimation, the testing of network observability, and methods to assure computational efficiency. Includes numerous tutorial examples that fully analyze problems posed by the inclusion of current measurements in existing state estimators and illustrate practical solutions to these challenges. Written by two expert researchers in the field, Power System State Estimation extensively details topics never before covered in depth in any other text, including novel robust state estimation methods, estimation of parameter and topology errors, and the use of ampere measurements for state estimation. It introduces various methods and computational issues involved in the formulation and implementation of the weighted least squares (WLS) approach, presents statistical tests for the detection and identification of bad data in system measurements, and reveals alternative topological and numerical formulations for the network observability problem.

Download or read book Transformer Engineering written by S.V. Kulkarni and published by CRC Press. This book was released on 2004-05-24 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference illustrates the interaction and operation of transformer and system components and spans more than two decades of technological advancement to provide an updated perspective on the increasing demands and requirements of the modern transformer industry. Guiding engineers through everyday design challenges and difficulties such as stray loss estimation and control, prediction of winding hot spots, and calculation of various stress levels and performance figures, the book propagates the use of advanced computational tools for the optimization and quality enhancement of power system transformers and encompasses every key aspect of transformer function, design, and engineering.

Download or read book Analysis of Distance Protection written by Vivian Cook and published by . This book was released on 1985 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stand Alone and Hybrid Wind Energy Systems written by J K Kaldellis and published by Elsevier. This book was released on 2010-07-27 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind power is fast becoming one of the leading renewable energy sources worldwide, not only from large scale wind farms but also from the increasing penetration of stand-alone and hybrid wind energy systems. These systems are primarily of benefit in small-scale applications, especially where there is no connection to a central electricity network, and where there are limited conventional fuel resources but available renewable energy resources. By applying appropriate planning, systems selection and sizing, including the integration of energy storage devices to mitigate variable energy generation patterns, theses systems can supply secure reliable and economic power to remote locations and distributed micro-grids.Stand-alone and hybrid wind energy systems is a synthesis of the most recent knowledge and experience on wind-based hybrid renewable energy systems, comprehensively covering the scientific, technical and socio-economic issues involved in the application of these systems.Part one presents an overview of the fundamental science and engineering of stand-alone and hybrid wind energy systems and energy storage technology, including design and performance optimisation methods and feasibility assessment for these systems. Part two initially reviews the design, development, operation and optimisation of stand-alone and hybrid wind energy systems – including wind-diesel, wind -photovoltaic (PV), wind-hydrogen, and wind-hydropower energy systems – before moving on to examine applicable energy storage technology, including electro-chemical, flywheel (kinetic) and compressed air energy storage technologies. Finally, Part three assesses the integration of stand-alone and hybrid wind energy systems and energy technology into remote micro-grids and buildings, and their application for desalination systems.With its distinguished editor and international team of contributors, Stand-alone and hybrid wind energy systems is a standard reference for all renewable energy professionals, consultants, researchers and academics from post-graduate level up. - Provides an overview of the fundamental science and engineering of stand-alone hybrid and wind energy systems, including design and performance optimisation methods - Reviews the development and operation of stand-alone and hybrid wind energy systems - Assesses the integration of stand-alone and hybrid wind energy systems and energy storage technology into remote micro-grids and buildings, and their application for desalination systems

Download or read book Dynamic Simulation of Electric Machinery written by Chee-Mun Ong and published by Prentice Hall. This book was released on 1998 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book and its accompanying CD-ROM offer a complete treatment from background theory and models to implementation and verification techniques for simulations and linear analysis of frequently studied machine systems. Every chapter of Dynamic Simulation of Electric Machinery includes exercises and projects that can be explored using the accompanying software. A full chapter is devoted to the use of MATLAB and SIMULINK, and an appendix provides a convenient overview of key numerical methods used. Dynamic Simulation of Electric Machinery provides professional engineers and students with a complete toolkit for modeling and analyzing power systems on their desktop computers.