Download or read book Some Observations on the Electron microscopic Fractography of Embrittled Sheets written by W. R. Warke and published by . This book was released on 1964 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Observations on Delayed Cracking in Welded Structures of Unalloyed Titanium Sheet written by R. H. Ernst and published by . This book was released on 1964 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brief study of delayed fracture in a seam-welded titanium panel is summarized in this memorandum. Examination of the fracture surface with electron microscopy showed that the material cleaved, failing in a brittle manner. Although the nature of the embrittlement was not clearly defined, titanium hydride phase was suspected as a prime contributor to failure. Even though the hydrogen content of the titanium was only 65 ppm, hydride embrittlement was thought to have occurred from precipitation of hydride platelets on crystal planes oriented normal to welding stresses. Other work, briefly discussed in the memorandum, has confirmed that hydride platelets in titanium can be oriented by stress and that tensile ductility of Zircaloy (which behaves similarly with respect to hydrogen, to titanium) depends upon hydride orientation. Stress-relief annealing of welded titanium structures is recommended wherever possible to minimize embrittlement by stress-oriented hydrides. (Author).
Download or read book Electron Microscopic Fractography written by W. R. Warke and published by . This book was released on 1962 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Production of Powder metallurgy Tungsten Sheet and Plate written by D. J. Maykuth and published by . This book was released on 1964 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrodeposited Electroless and Anodized Coatings on Beryllium written by John G. Beach and published by . This book was released on 1964 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report on the Fourth Maraging steel Project Review written by Albert M. Hall and published by . This book was released on 1964 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Summary of the Ninth Meeting of the Refractory Composites Working Group written by E. S. Bartlett and published by . This book was released on 1965 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electron Microfractography written by and published by ASTM International. This book was released on 1969 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continued Observations on the Distribution of Stress in the Vicinity of a Crack in the Center of a Plate written by L. R. Jackson and published by . This book was released on 1964 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This memorandum supplements and augments information presented in DMIC Memorandum 178 (AD-422 463). In the present report, Neuber's stress equations are rewritten entirely in rectangular coordinates. In addition, numerical results have been extended to include the stress distribution around an indefinitely sharp crack. It is also shown that the stress function used in a British work for an indefinitely sharp crack yielded identical numerical results, even though the stress function was of a different type than that employed by Neuber. The Von Mises relation was chosen to delineate the area around a crack in which plastic flow is occurring. The numerical tables in this memorandum give values for the function of plane stress as well as one possible interpretation of plane strain. Values of the hydrostatic stress variant are also given for both plane stress and plane strain. (Author).
Download or read book Stress corrosion Cracking of Aluminum Alloys written by J. D. Jackson and published by . This book was released on 1965 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Damage in Machined Beryllium written by Stanley W. Porembka and published by . This book was released on 1965 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of machining damage effects in beryllium was made. Surface damage is caused by twinning and microcracking as a result of various machining operations. Twinning is a result of surface working while microcracks initiate at intersections of twins and grain boundaries, at twin-matrix interfaces, at impurity particles, and in heavily twinned regions. These phenomena may be due to residual stresses in wrought products as well as machining parameters such as tool type, feed, and speed and depth of cut. The loss of mechanical properties due to machining damage is reviewed. Also presented is a study of surface damage actually encountered with machining of the shingles for the Gemini spacecraft.
Download or read book Index to DMIC Reports and Memoranda written by Battelle Memorial Institute. Defense Metals Information Center and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Porosity in Titanium Welds written by Robert Melvin Evans and published by . This book was released on 1964 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porosity in fusion welds in titanium has been encountered to some extent in all programs using this joining method. While measures to control cleanliness and to employ good welding techniques have successfully reduced the occurrence of porosity, specific indentification of the various causes of porosity is still lacking. Some factors suspected of causing porosity in titanium welds are hydrogen, cleanliness of joint area, contamination in filler wire, and welding procedures and techniques.
Download or read book A Review of Dimensional Instability in Metals written by F. C. Holden and published by . This book was released on 1964 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machining of Titanium Alloys written by C. T. Olofson and published by . This book was released on 1965 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The memorandum summarizes current knowledge concerning the machining of titanium alloys. The memorandum deals with the following conventional machining operations: milling, face milling, peripheral milling, turning, boring, drilling, tapping, and grinding. The last section of the memorandum deals with chemical milling operations.
Download or read book A Review of Available Information on the Welding of Thick Titanium Plate in the User written by Herbert W. Mishler and published by . This book was released on 1964 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical and Physical Properties of Three Superalloys MAR M200 MAR M200 MAR 302 and MAR M322 written by J. A. VanEcho and published by . This book was released on 1964 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: