Download or read book Solving Casting Defect Problems with an Expert System written by Thomas A. Phelps and published by . This book was released on 1987 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Methodology for Eliminating Casting Defects Using an Expert System Approach written by Sylvanus Waibogha and published by . This book was released on 1986 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effectiveness of an Expert System for Teaching Casting Defect Diagnosis in Engineering and Technical Education written by Kim E. Ruyle and published by . This book was released on 1986 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this study was to determine if there was a significant difference in the amount of technical subject matter learned during a fixed period of instruction by students working with a computer expert system and students working with human experts from a technical field. All students participating in the study were enrolled in a manufacturing processes course at Oregon State University during the spring term, 1986, and, as part of the course were learning to diagnose defective castings. Prior to the experiment, students were given initial instruction in casting processes and randomly divided into two experimental groups for treatment. The students in Group I completed a laboratory exercise that provided opportunity for hands-on practice diagnosing defective castings. They were given access to a laboratory instruction manual and allowed to ask for assistance from two individuals who were present, both experts in casting processes . Students in Group II completed the same exercise with the same defective castings and lab instruction manuals. They were not, however, given access to human experts; they instead worked with a computer expert system, TELECAST, that interacts with the user and provides diagnoses for defective castings. Students' knowledge of casting defect diagnosis was evaluated with a test instrument prior to the treatment and again following treatment. The analysis of covariance was the statistical tool used to analyze the test results. Statistical analysis revealed there was no difference in the amount learned by the two groups of students (calculated F = .002). The TELECAST expert system proved to be no more and no less effective than the human experts at effecting learning.
Download or read book Casting Defect Analysis Expert System written by Ajay Prabhakar Kulkarni and published by . This book was released on 1991 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Casting Principles And Practice written by T V Ramana Rao and published by New Age International. This book was released on 2007 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: In This Book, The Topics/Syllabus Adequately Cover Metal Casting Subject In The Courses Of Mechanical, Production And Metallurgy Branches For B.E., B.Tech. As Well As Production And Industrial Metallurgy For M.Tech.With His Direct Experience In Metal Casting Industry And Teaching Academics The Author Attempts To Bridge The Gap Existing Between Essential Theory In Books And Vital Practical Applications In Industry.It Contains All The Molding Processes Normally Used With Details Of Ingredient Testing,Different Stages Of Casting Production Essential Theory Of Gating And Risering, As Well Asfinishing, Inspection And Quality Control.Over 80 Line Sketches Facilitate Easy Understanding. Information Given Through Over 20 Tables Help Easy Comprehension, Comparison And Remembrance. Exhaustive Examples Of Specific Components Normally Made By Casting Process Help To Build Confidence When Entering Industry. Over 200 Technical Books And Research Papers Upto May 1996 Are Referred. Examples Of Working Computer Programs Given, Form The Basis For Modern Practice-Oriented Projects In Final Year.For Practising Engineers, Managers And Entrepreneurs, This Book Provides Useful Theory And Practical Aspects On Foundry Management. Exhaustive Treatment Of Critical Gating & Risering With Many Industry Examples, Practical Solutions To Melting Problems, Casting Defects Analysis Through Cause-Effect Diagrams Will Be Very Useful. Essential Information. On Energy Conservation And Environmental Pollution Control Is Also Given In The Last Chapter.
Download or read book Database and Expert Systems Applications written by Stephen W. Liddle and published by Springer. This book was released on 2012-08-18 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNCS 7446 and LNCS 7447 constitutes the refereed proceedings of the 23rd International Conference on Database and Expert Systems Applications, DEXA 2012, held in Vienna, Austria, September 3-6, 2012. The 49 revised full papers presented together with 37 short papers and 2 keynote talks were carefully reviewed and selected from 179 submissions. These papers discuss a range of topics including: database query processing, in particular XML queries; labelling of XML documents; computational efficiency, data extraction; personalization, preferences, and ranking; security and privacy; database schema evaluation and evolution; semantic Web; privacy and provenance; data mining; data streaming; distributed systems; searching and query answering; structuring, compression and optimization; failure, fault analysis, and uncertainty; predication, extraction, and annotation; ranking and personalisation; database partitioning and performance measurement; recommendation and prediction systems; business processes; social networking.
Download or read book A Consultative Knowledge based Expert System for the Analysis of Casting Defects written by Srikanth Padmanabhan and published by . This book was released on 1989 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Journal of Cast Metals Research written by and published by . This book was released on 2002 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Manufacturing Processes written by K. S. Vijay Sekar and published by Springer. This book was released on 2018-09-10 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected proceedings of the International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM 2018). It discusses innovative manufacturing processes, such as rapid prototyping, nontraditional machining, advanced computer numerical control (CNC) machining, and advanced metal forming. The book particularly focuses on finite element simulation and optimization, which aid in reducing experimental costs and time. This book is a valuable resource for students, researchers, and professionals alike.
Download or read book Transactions of the North American Manufacturing Research Institution of SME written by and published by . This book was released on 1989 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Expert System Applications written by Leonard Bolc and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: While expert systems technology originated in the United States, its development has become an international concern. Since the start of the DENDRAL project at Stanford University over 15 years ago, with its objective of problem-solving via the automation of actual human expert knowledge, significant expert systems projects have been completed in countries rang ing from Japan to France, Spain to China. This book presents a sample of five such projects, along with four substantial reports of mature studies from North American researchers. Two important issues of expert system design permeate the papers in this volume. The first concerns the incorporation of substantial numeric knowledge into a system. This has become a significant focus of work as researchers have sought to apply expert systems tech nology to complex, real-world domains already subject to statistical or algebraic description (and handled well at some level in numeric terms). A second prominent issue is that of representing control knowledge in a manner which is both explicit, and thus available for inspection, and compatible with the semantics of the problem domain.
Download or read book Informatics and Management Science V written by Wenjiang Du and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Informatics and Management Science (IMS) 2012 will be held on November 16-19, 2012, in Chongqing, China, which is organized by Chongqing Normal University, Chongqing University, Shanghai Jiao Tong University, Nanyang Technological University, University of Michigan, Chongqing University of Arts and Sciences, and sponsored by National Natural Science Foundation of China (NSFC). The objective of IMS 2012 is to facilitate an exchange of information on best practices for the latest research advances in a range of areas. Informatics and Management Science contains over 600 contributions to suggest and inspire solutions and methods drawing from multiple disciplines including: Computer Science Communications and Electrical Engineering Management Science Service Science Business Intelligence
Download or read book Systematic Introduction to Expert Systems written by Frank Puppe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present one of the main obstacles to a broader application of expert systems is the lack of a theory to tell us which problem-solving methods areavailable for a given problem class. Such a theory could lead to significant progress in the following central aims of the expert system technique: - Evaluating the technical feasibility of expert system projects: This depends on whether there is a suitable problem-solving method, and if possible a corresponding tool, for the given problem class. - Simplifying knowledge acquisition and maintenance: The problem-solving methods provide direct assistance as interpretation models in knowledge acquisition. Also, they make possible the development of problem-specific expert system tools with graphical knowledge acquisition components, which can be used even by experts without programming experience. - Making use of expert systems as a knowledge medium: The structured knowledge in expert systems can be used not only for problem solving but also for knowledge communication and tutorial purposes. With such a theory in mind, this book provides a systematic introduction to expert systems. It describes the basic knowledge representations and the present situation with regard tothe identification, realization, and integration of problem-solving methods for the main problem classes of expert systems: classification (diagnostics), construction, and simulation.
Download or read book Analysis of Casting Defects written by American Foundrymen's Society and published by . This book was released on 1974 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps foundrymen eliminate or minimize inherent casting problems, imrpove casting quality and reduce cleaning and finishing costs.
Download or read book Expert Systems in Mineral and Metal Processing written by A. J. Niemi and published by Elsevier. This book was released on 2016-09-01 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the metal and mining industries, the use of expert systems for monitoring and control is on the increase. The content of each paper had to include both expert systems, neural networks or fuzzy control. The papers were evenly contributed from industry, universities and research institutes, thus this book provides a valuable insight into the theoretical as well as the practical applications currently in use within the industry.
Download or read book Transactions of the American Foundrymen s Society written by and published by . This book was released on 1990 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Computing in Industrial Applications written by Yukinori Suzuki and published by Springer Science & Business Media. This book was released on 2000-03-15 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of papers that were initially presented at the 4th On-Line World Conference on Soft Computing in Industrial Applications that was held in September 1999. Soft Computing provides various methodologies for developing intelligent systems that offer competitive solutions to real world problems. This book is comprised of a unique collection of papers that provide a comprehensive overview of state-of-the-art-theory and sucessful industrial applications of soft computing around the world. It is written by some of the leading researchers in this field. This book is aimed at researchers and professional engineers who are engaged in developing intelligent systems as well as graduate students in science and engineering.
