Download or read book Solution Combustion Synthesis Of Nanostructured Solid Catalysts For Sustainable Chemistry written by Sergio Gonzalez-cortes and published by World Scientific. This book was released on 2020-10-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term 'green chemistry' was coined by Anastas and Warner in the early 1990s and it is nowadays the mainstay of designing and implementing advanced chemical processes that decrease or eliminate the use and generation of hazardous substances whilst minimizing energy consumption.Solution Combustion Synthesis of Nanostructured Solid Catalysts for Sustainable Chemistry is an interdisciplinary collection of fundamental and applied cutting-edge studies which highlight general and specific aspects of the synthesis of nanostructured catalysts through Solution Combustion Synthesis (SCS), studying their applications from the perspective of green chemistry.This book intends to integrate the fundamental principles of the SCS process with its engineering aspects and covers the synthesis of a wide variety of catalytic materials. This reference book can be used as a permanent consulting material for students, researchers and the general readership for green chemistry, nanochemistry, materials science and chemical engineering.
Download or read book Nanostructured Catalysts for Environmental Applications written by Marco Piumetti and published by Springer Nature. This book was released on 2021-01-20 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an overview of the recent studies and advances in environmental catalysis by nanomaterials, considering both the fundamental and the technological aspects. It offers contributions in different areas of environmental catalysis, including the catalytic and photocatalytic abatement of environmentally hazardous effluents from stationary or mobile sources, the valorization of waste and the production of sustainable energy. In other words, this monograph provides an overview of modern environmental and energy related applications with a particular emphasis to nano-sized catalytic materials. Recent concepts, experimental data and advanced theories are reported in this book to give evidence of the environmental and sustainable applications that can be found in the highly interdisciplinary field of catalysis.
Download or read book Chemistry of Nanocrystalline Oxide Materials written by K. C. Patil and published by World Scientific. This book was released on 2008 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-oxide materials lend themselves to applications in a wide variety of emerging technological fields such as microelectronics, catalysts, ceramics, coatings, and energy storage. However, developing new routes for making nano-based materials is a challenging area for solid-state materials chemists. This book does just that by describing a novel method for preparing them. The authors have developed a novel low-temperature, self-propagating synthetic route to nano-oxides by the solution combustion and combustible precursor processes. This method provides the desired composition, structure, and properties for many types of technologically useful nanocrystalline oxide materials like alumina, ceria, iron oxides, titania, yttria, and zirconia, among others.The book is particularly instructive in bringing readers one step closer to the exploration of nanomaterials. Students of nanoscience can acquaint themselves with the actual production and evaluation of nanopowders by this route, while academic researchers and industrial scientists will find answers to a host of questions on nano-oxides. The book also provides an impetus for scientists in industrial research to evaluate and explore new ways to scale up the production of nanomaterials, offering helpful suggestions for further research.
Download or read book Densification Impact On Raw Chemically And Thermally Pretreated Biomass Physical Properties And Biofuels Production written by Jaya Shankar Tumuluru and published by World Scientific. This book was released on 2023-05-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: First-generation ethanol plants did not have many operational challenges as the feedstocks (e.g., corn) used for fuel production are dense, stable, storable, and shippable commodity-type products with fewer conversion challenges. These feedstock properties led the first-generation large-scale biorefineries to grow exponentially. In the second-generation biofuels, the feedstocks used are agricultural and forest residues, dedicated energy crops, industrial wastes, and municipal solid waste. When the industry tested these feedstocks for biofuel production, they faced flowability, storage, transportation, and conversion issues. One way to overcome some of the feeding, handling, transportation, and variable moisture challenges is to densify the biomass. Pellet mills and briquette presses are commonly used to produce densified products. The densified products have uniform size, shape, higher bulk density, and better downstream conversion performance. Also, the densified products are aerobically stable and can be stored for longer durations without any loss in quality.This book's focus is on understanding how the densification process variables, biomass types and their blends, mechanical preprocessing, and thermal and chemical pretreatment methods impact the quality of the densified products produced for biofuel production. Finally, the book also explores the conversion performance of densified biomass for biofuel production.
Download or read book Advanced Nanomaterials for Catalysis and Energy written by Vladislav A. Sadykov and published by Elsevier. This book was released on 2018-08-27 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials for Catalysis and Energy: Synthesis, Characterization and Applications outlines new approaches to the synthesis of nanomaterials (synthesis in flow conditions, laser electrodispersion of single metals or alloys on carbon or oxide supports, mechanochemistry, sol-gel routes, etc.) to provide systems with a narrow particle size distribution, controlled metal-support interaction and nanocomposites with uniform spatial distribution of domains of different phases, even in dense sintered materials. Methods for characterization of real structure and surface properties of nanomaterials are discussed, including synchrotron radiation diffraction and X-ray photoelectron spectroscopy studies, neutronography, transmission/scanning electron microscopy with elemental analysis, and more. The book covers the effect of nanosystems' composition, bulk and surface properties, metal-support interaction, particle size and morphology, deposition density, etc. on their functional properties (transport features, catalytic activity and reaction mechanism). Finally, it includes examples of various developed nanostructured solid electrolytes and mixed ionic-electronic conductors as materials in solid oxide fuel cells and asymmetric supported membranes for oxygen and hydrogen separation. Outlines synthetic and characterization methods for nanocatalysts Relates nanocatalysts' properties to their specific applications Proposes optimization methods aiming at specific applications
Download or read book Green Photocatalysts written by Mu. Naushad and published by Springer. This book was released on 2019-07-02 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced photocatalytic technologies for wastewater treatment. The fabrication, surface modification, roles and mechanisms of green catalysts are detailed. The catalysts include nanostructured catalysts, semiconductors, metal and non-metal doped catalysts, surface plasmon materials, graphene oxide-based materials, polymer-based composite materials, heterogenous type I and type II catalysts.
Download or read book Nanostructured Catalysts written by Susannah L. Scott and published by Springer Science & Business Media. This book was released on 2008-04-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the recent advent of nanotechnology, research and development in the area of nanostructured materials has gained unprecedented prominence. Novel materials with potentially exciting new applications are being discovered at a much higher rate than ever before. Innovative tools to fabricate, manipulate, characterize and evaluate such materials are being developed and expanded. To keep pace with this extremely rapid growth, it is necessary to take a breath from time to time, to critically assess the current knowledge and provide thoughts for future developments. This book represents one of these moments, as a number of prominent scientists in nanostructured materials join forces to provide insightful reviews of their areas of expertise, thus offering an overall picture of the state-- the art of the field. Nanostructured materials designate an increasing number of materials with designed shapes, surfaces, structures, pore systems, etc. Nanostructured materials with modified surfaces include those whose surfaces have been altered via such techniques as grafting and tethering of organic or organometallic species, or through various deposition procedures including electro, electroless and vapor deposition, or simple adsorption. These materials find important applications in catalysis, separation and environmental remediation. Materials with patterned surfaces, which are essential for the optoelectronics industry, constitute another important class of surface-modified nanostructured materials. Other materials are considered nanostructured because of their composition and internal organization.
Download or read book Design And Applications Of Single site Heterogeneous Catalysts Contributions To Green Chemistry Clean Technology And Sustainability written by John Meurig Thomas and published by World Scientific Publishing Company. This book was released on 2012-04-16 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: For far too long chemists and industrialists have relied on the use of aggressive reagents such as nitric and sulphuric acids, permanganates and dichromates to prepare the massive quantities of both bulk and fine chemicals that are needed for the maintenance of civilised life — materials such as fuels, fabrics, foodstuffs, fertilisers and pharmaceuticals. Such aggressive reagents generate vast quantities of environmentally harmful and often toxic by-products, including the oxides of nitrogen, of metal oxides and carbon dioxide.Now, owing to recent advances made in the synthesis of nanoporous solids, it is feasible to design new solid catalysts that enable benign, mild oxidants to be used, frequently without utilising solvents, to manufacture the products that the chemical, pharmaceutical, agro- and bio-chemical industries require. These new solid agents are designated single-site heterogeneous catalysts (SSHCs). Their principal characteristics are that all the active sites present in the high-area solids are identical in their atomic environment and hence in their energy of interaction with reactants, just as in enzymes.Single-site heterogeneous catalysts now occupy a position of growing importance both academically and in their potential for commercial exploitation. This text, the only one devoted to such catalysts, dwells both on principles of design and on applications, such as the benign synthesis of nylon 6 and vitamin B3. It equips the reader with unifying insights required for future catalytic adventures in the quest for sustainability in the materials used by humankind.Anyone acquainted with the language of molecules, including undergraduates in the physical and biological sciences, as well as graduates in engineering and materials science, should be able to assimilate the principles and examples presented in this book. Inter alia, it describes how clean technology and ‘green’ processes may be carried out in an environmentally responsible manner.
Download or read book Nanotechnology in Catalysis written by Bert Sels and published by John Wiley & Sons. This book was released on 2017-06-20 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the R&D efforts in the field that have resulted in a plethora of novel applications over the past decade, this handbook gives a comprehensive overview of the tangible benefits of nanotechnology in catalysis. By bridging fundamental research and industrial development, it provides a unique perspective on this scientifically and economically important field. While the first three parts are devoted to preparation and characterization of nanocatalysts, the final three provide in-depth insights into their applications in the fine chemicals industry, the energy industry, and for environmental protection, with expert authors reporting on real-life applications that are on the brink of commercialization. Timely reading for catalytic chemists, materials scientists, chemists in industry, and process engineers.
Download or read book Nanostructured Catalysts written by Christian Hess and published by Royal Society of Chemistry. This book was released on 2011-07-22 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a comprehensive up-to-date summary of the existing information on the structural/electronic properties, chemistry and catalytic properties of vanadium and molybdenum containing catalysts. It discusses the importance of nanoscience for the controlled synthesis of catalysts with functional properties and introduces the necessary background regarding surface properties and preparation techniques, leading from a textbook level to the current state of knowledge. Then follows an extensive survey and analysis of the existing open and patent literature - an essential knowledge source for the development of the new generation of partial oxidation catalysts. Important examples from current research on partial oxidation reactions are reviewed from experts in the field. The next chapter discusses the importance of 2- and 3-dimensional model systems for a fundamental understanding of the structure of transition metal oxide catalysts and its correlation to reactivity. Finally, an outlook on research opportunities within the area of partial oxidation reactions is presented.
Download or read book Synthesis of Solid Catalysts written by Krijn P. de Jong and published by John Wiley & Sons. This book was released on 2009-08-04 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book combines recent progress with a discussion of the general aspects of catalyst preparation. The first part deals with the basic principles of solid catalyst preparation, explaining the main aspects of sol-gel chemistry and interfacial chemistry, followed by such techniques as co-precipitation and immobilization. New tools for catalyst preparation research, including microspectroscopy and high-throughput experimentation, are also taken into account. The second part heightens the practical relevance by providing six case studies on such topics as the preparation of zeolites, hydrotreating catalysts, methanol catalysts and gold catalysts
Download or read book Heterogeneous Nanocatalysis for Energy and Environmental Sustainability Volume 1 written by Putla Sudarsanam and published by John Wiley & Sons. This book was released on 2023-01-04 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential companion for catalysis researchers and professionals studying economically viable and eco-friendly catalytic strategies for energy conversion In the two-volume Heterogeneous Nanocatalysis for Energy and Environmental Sustainability, a team of distinguished researchers deliver a comprehensive discussion of fundamental concepts in, and practical applications of, heterogeneous nanocatalysis for alternative energy production, biomass conversion, solar energy, green fuels, H2 production, fuel cells, electrochemical energy conversion processes, CO2 conversion, clean water, and environmental protection. The volumes cover the design and catalytic performance of various nanocatalysts, including nanosized metals and metal oxides, supported metal nanoparticles, inverse oxide-metal nanocatalysts, core-shell nanocatalysts, nanoporous zeolites, nanocarbon composites, and metal oxides in confined spaces. Each chapter contains a critical discussion of the opportunities and challenges posed by the use of nanosized catalysts for practical applications. Volume 1 – Energy Applications focuses on the conversion of renewable energy (biomass/solar) into green fuels and chemicals, ammonia synthesis, clean hydrogen production, and electrochemical energy conversion processes using a variety of nanosized catalysts. It also offers: A thorough introduction to heterogeneous catalysis and nanocatalysis, as well as a discussion of catalytic active sites at nano-scale range Comprehensive explorations of the methods for control and activation of nanosized catalysts Practical discussions of C3N4-based nanohybrid catalysts for solar hydrogen production via water splitting Nanosized catalysts in visible light photocatalysis for sustainable organic synthesis Applications of MXenes in electrocatalysis Perfect for researchers, postgraduate students, chemists, and engineers interested in heterogeneous catalysis and nanocatalysis, Heterogeneous Nanocatalysis for Energy and Environmental Sustainability will also earn a place in the libraries of professionals working in alternative energy production, biomass conversion, solar energy, green fuels, H2 production, fuel cells, electrochemical energy conversion processes, CO2 conversion, clean water, and environmental protection.
Download or read book Combustion Synthesis Novel Routes to Novel Materials written by Maximilian Lackner and published by Bentham Science Publishers. This book was released on 2010-07-08 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Synthesis covers a wide range of technologies to produce advanced materials, ranging from oxides, nitrides and intermetallics to various nanostructured compounds, such as nanopowders and carbon nano tubes (CNT). This Ebook, with contributions from leading experts in industry and academia, provides an up-to-date overview about combustion synthesis. a comparison to conventional methods as well as a description of analytical techniques is given, alongside the description of special techniques, such as microwave or electrical field assistance. Aspects such as historic development and scale-up make this book a concise, yet comprehensive review about combustion synthesis. This book should be useful for scientists, engineers and practitioners working in materials science and related fields.
Download or read book Nanoscale Materials written by Luis M. Liz-Marzán and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized nanoassemblies of inorganic nanoparticles and organic molecules are building blocks of nanodevices, whether they are designed to perform molecular level computing, sense the environment or improve the catalytic properties of a material. The key to creation of these hybrid nanostructures lies in understanding the chemistry at a fundamental level. This book serves as a reference book for researchers by providing fundamental understanding of many nanoscopic materials.
Download or read book Atomically Precise Methods for Synthesis of Solid Catalysts written by Sophie Hermans and published by Royal Society of Chemistry. This book was released on 2015 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: With techniques bridging the gap between surface science and heterogeneous catalysis the book presents a tool-kit for anyone wishing to prepare and define solid catalysts.
Download or read book Recent Trends in Materials Science and Applications written by Jeyasingh Ebenezar and published by Springer. This book was released on 2017-05-04 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the plenary sessions, invited lectures, and papers presented at the International Conference on Recent Trends in Materials Science and Applications (ICRTMSA-2016). It also features revealing presentations on various aspects of Materials Science, such as nanomaterials, photonic crystal fibers, quantum dots, thin film techniques, crystal growth, spectroscopic procedures, fabrication and characterisation of new materials / compounds with enhanced features, and potential applications in nonlinear optical and electro-optic devices, solar cell device, chemical sensing, biomedical imaging, diagnosis and treatment of cancer, energy storage device etc. This book will be of great interest to beginning and seasoned researchers alike.
Download or read book Horizons in Sustainable Industrial Chemistry and Catalysis written by Stefania Albonetti and published by Elsevier. This book was released on 2019-02-13 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizons in Sustainable Industrial Chemistry and Catalysis, Volume 178, presents a comprehensive picture of recent developments in terms of sustainable industrial processes and the catalytic needs and opportunities to develop these novel routes. Each chapter includes an introduction and state-of-the-art in the field, along with a series of specific aspects and examples. The book identifies new opportunities for research that will help us transition to low carbon and sustainable energy and chemical production. Users will find an integrated view of the new possibilities in this area that unleashes new possibilities in energy and chemistry. Combines an analysis of each scenario, the state-of-the art, and specific examples to help users better understand needs, opportunities, gaps and challenges Offers an integrated view of new catalytic technologies that are needed for future use Presents an interdisciplinary approach that combines broad expertise Brings together experts in the area of sustainable industrial chemistry
