Download or read book Solution and Surface Polymerization written by Eli Ruckenstein and published by CRC Press. This book was released on 2019-04-01 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising one volume of Functional and Modified Polymeric Materials, Two-Volume Set, this well-organized collection of papers by Professor Eli Ruckenstein and co-workers focuses on functional and modified polymeric materials prepared mainly through solution polymerization and surface polymerization. Although solution polymerization has been broadly utilized for the preparation of polymeric materials, the book shows significant approaches to special classes of polymeric materials including functional polymers by living ionic polymerization, degradable and decrosslinkable polymers, semi- and interpenetrating polymer network pervaporation membranes, and soluble conducting polymers. It also focuses on preparing and modifying conductive surface of polymer or polymer-based materials.
Download or read book Solution and Surface Polymerization written by Eli Ruckenstein and published by CRC Press. This book was released on 2018 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising one volume of Functional and Modified Polymeric Materials, Two-Volume Set, this well-organized collection of papers by Professor Eli Ruckenstein and co-workers focuses on functional and modified polymeric materials prepared mainly through solution polymerization and surface polymerization. Although solution polymerization has been broadly utilized for the preparation of polymeric materials, the book shows significant approaches to special classes of polymeric materials including functional polymers by living ionic polymerization, degradable and decrosslinkable polymers, semi- and interpenetrating polymer network pervaporation membranes, and soluble conducting polymers. It also focuses on preparing and modifying conductive surface of polymer or polymer-based materials.
Download or read book Surface Chemistry of Surfactants and Polymers written by Bengt Kronberg and published by John Wiley & Sons. This book was released on 2014-12-31 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the reader an introduction to the field of surfactants in solution as well as polymers in solution. Starting with an introduction to surfactants the book then discusses their environmental and health aspects. Chapter 3 looks at fundamental forces in surface and colloid chemistry. Chapter 4 covers self-assembly and 5 phase diagrams. Chapter 6 reviews advanced self-assembly while chapter 7 looks at complex behaviour. Chapters 8 to 10 cover polymer adsorption at solid surfaces, polymers in solution and surface active polymers, respectively. Chapters 11 and 12 discuss adsorption and surface and interfacial tension, while Chapters 13- 16 deal with mixed surfactant systems. Chapter 17, 18 and 19 address microemulsions, colloidal stability and the rheology of polymer and surfactant solutions. Wetting and wetting agents, hydrophobization and hydrophobizing agents, solid dispersions, surfactant assemblies, foaming, emulsions and emulsifiers and microemulsions for soil and oil removal complete the coverage in chapters 20-25.
Download or read book Polymer Surfaces and Interfaces written by Manfred Stamm and published by Springer Science & Business Media. This book was released on 2008-01-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: In what is an extremely practical and applicable new work, experts provide concise explanations, with examples and illustrations, of the key techniques in this important field. In each case, after basic principles have been reviewed, applications of the experimental techniques are discussed and illustrated with specific examples. Scientists and engineers in research and development will benefit from an application-oriented book that helps them to find solutions to both fundamental and applied problems. They will know that the surfaces and interfaces of polymers play an important role in most of the application areas of polymers, from moulds, foils, and composites, to biomaterials and applications in micro- and nanotechnology.
Download or read book Surfactants and Polymers in Aqueous Solution written by Krister Holmberg and published by Wiley. This book was released on 2018-08-20 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many industrial formulations such as detergents, paints, foodstuff and cosmetics contain both surfactants and polymers and their interaction govern many of the properties. This book is unique in that it discusses the solution chemistry of both surfactants and polymers and also the interactions between the two. The book, which is based on successful courses given by the authors since 1992, is a revised and extended version of the first edition that became a market success with six reprints since 1998. Surfactants and Polymers in Aqueous Solution is broad in scope, providing both theoretical insights and practical help for those active in the area. This book contains a thorough discussion of surfactant types and gives information of main routes of preparation. A chapter on novel surfactants has been included in the new edition. Physicochemical phenomena such as self-assembly in solution, adsorption, gel formation and foaming are discussed in detail. Particular attention is paid to the solution behaviour of surfactants and polymers containing polyoxyethylene chains. Surface active polymers are presented and their interaction with surfactants is a core topic of the book. Protein-surfactant interaction is also important and a new chapter deals with this issue. Microemulsions are treated in depth and several important application such as detergency and their use as media for chemical reactions are presented. Emulsions and the choice of emulsifier is discussed in some detail. The new edition also contains chapters on rheology and wetting. Surfactants and Polymers in Aqueous Solution is aimed at those dealing with surface chemistry research at universities and with surfactant formulation in industry.
Download or read book Polymer Surfaces written by Fabio Garbassi and published by . This book was released on 1994-02-15 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Surfaces - From Physics to Technology is divided into four main sections. Firstly the origins and physical principles governing the properties of polymer surfaces are considered. Next the authors discuss methods of characterization, particularly spectroscopic, and those connected to surface energetics.
Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.
Download or read book Polymer Thin Films written by Ophelia Kwan Chui Tsui and published by World Scientific. This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ch. 1. Block copolymer thin films / J.-Y. Wang, S. Park and T. P. Russell -- ch. 2. Equilibration of block copolymer films on chemically patterned surfaces / G. S. W. Craig, H. Kang and P. F. Nealey -- ch. 3. Structure formation and evolution in confined cylinder-forming block copolymers / G. J. A. Sevink and J. G. E. M. Fraaije -- ch. 4. Block copolymer lithography for magnetic device fabrication / J. Y. Cheng and C. A. Ross -- ch. 5. Hierarchical structuring of polymer nanoparticles by self-organization / M. Shimomura ... [et al.] -- ch. 6. Wrinkling polymers for surface structure control and functionality / E. P. Chan and A. J. Crosby -- ch. 7. Crystallization in polymer thin films: morphology and growth / R. M. Van Horn and S. Z. D. Cheng -- ch. 8. Friction at soft polymer surface / M. K. Chaudhury, K. Vorvolakos and D. Malotky -- ch. 9. Relationship between molecular architecture, large-strain mechanical response and adhesive performance of model, block copolymer-based pressure sensitive adhesives / C. Creton and K. R. Shull -- ch. 10. Stability and dewetting of thin liquid films / K. Jacobs, R. Seemann and S. Herminghaus -- ch. 11. Anomalous dynamics of polymer Films / O. K. C. Tsui.
Download or read book Polymer Solutions Blends and Interfaces written by I. Noda and published by Elsevier. This book was released on 2012-12-02 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behaviour of polymers in multi-component and multiphase systems such as solutions, blends and interfaces derived from both natural and synthetic sources and the subsequent influence of this on their physical properties is the theme of this book. Important new material on multiphase polymer systems such as block copolymers and liquid crystalline polymers is provided, and the solution and surface properties of enzymes and surface active polymers is described both theoretically and experimentally. The application of theory to the development of new cellulosic materials is particularly noteworthy. The relationship between end-use properties, such as adhesion, wetting, and colloidal stability, and molecular structure at the interface is addressed. Examples include the capillary pressure of nylon microporous membranes, a new technique for characterizing the adhesion between incompatible polymers, and the influence of the glass transition temperature at the fiber/matrix interface on interfacial shear strength. Characterization of polymer films, both electrochemically and via optical techniques is covered and the interactions of amphiphilic ions with polyacrylate polymer are described. The final two chapters introduce the topic of enzyme mobility at an interface and show how this may affect their role as biological catalysts.
Download or read book Controlled Radical Polymerization at and from Solid Surfaces written by Philipp Vana and published by Springer. This book was released on 2015-08-11 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science. The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics. Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist. Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned. Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students
Download or read book Nanofibers of Conjugated Polymers written by A. Sezai Sarac and published by CRC Press. This book was released on 2017-03-27 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conjugated polymer composites with high dielectric constants are being developed by the electronics industry in response to the need for power-grounded decoupling to secure the integrity of high-speed signals and to reduce electromagnetic interference. Electrically conducting polymers are materials that simultaneously possess the physical and chemical properties of organic polymers and the electronic characteristics of metals. Multifunctional micro- and nanostructures of conjugated polymers, such as of pyrrole, have received great attention in recent years because they can polymerize easily and have high conductivity and good thermal stability. They, however, have some disadvantages such as brittleness and hard processability, which can be overcome by developing their nanocomposites. Nanofiber materials with different dielectric properties can be made from conjugated polymer composites and used in the electronics industry, in sensors and batteries, for electrical stimulation to enhance nerve-regeneration process, and for constructing scaffolds for nerve tissue engineering. Electrospinning is a versatile technique that is used to produce ultrathin continuous fibers with high surface-to-volume and aspect ratios from a variety of materials, including polymers, composites, and ceramics. Conductive materials in fibrillar shape may be advantageous compared with films because of their inherent properties such as anisotropy, high surface area, and mechanical strength. They are of particular interest in electroactive composites as they can be efficiently distributed in an insulating polymer matrix to improve both electrical and mechanical properties. Combination of electrical properties with good mechanical performance is of particular interest in electroactive polymer technology. This book covers the general aspects of electrospinning and discusses the fundamental concepts that can be used to produce nanofibers with the help of mathematical models and equations. It also details the methods through which different polymeric structures can be included in conjugated polymers during electrospinning to form composites or blends of conjugated polymer nanofibers.
Download or read book Macromolecular Solutions written by Raymond B. Seymour and published by Elsevier. This book was released on 2013-10-22 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macromolecular Solutions: Solvent-Property Relationships in Polymers is a collection of papers presented at a symposium on Macromolecular Solutions, held New York City on August 23-28, 1981, sponsored by the American Chemical Society at its 182nd national meeting. This book is composed of 19 chapters and begins with discussions on the concept, application, and analysis of solubility parameters of polymers. The succeeding chapters deal with the role of solubility parameters in polymer coating design and stress cracking of nylon. Considerable chapters are devoted to the preparation, properties, reactions, and analysis of various polymers and copolymers. These topics are followed by surveys of the polymer-surfactant interaction effect on polymer solution properties and the effects of methanol-gasoline mixtures on elastomers. The final chapters describe the residual solvent content effect on dissolution kinetics of polymers; the application of excimer fluorescence to measure polymer-solvent interactions; and a general procedure for the calculation of thermodynamic properties of polymer solutions. This book will be of great value to polymer chemists, manufacturers, and researchers.
Download or read book Physicochemical Aspects of Polymer Surfaces written by K. L. Mittal and published by Springer. This book was released on 1983-02-28 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This and its companion Volume 2 document the proceedings of the International Symposium on Physicochemical Aspects of Polymer Surfaces held under the auspices of the American Chemical Society in New York City, August 23-28, 1981. This event was sponsored by the Division of Colloid and Surface Chemistry and the Divisions of Organic Coatings and Plastics Chemistry, and Industrial and Engineering Chemistry were the cosponsors. The study of polymer surfaces is important from both funda mental and applied points of view. The applications of polymers are legion and wheresoever polymers are used, their surface char acteristics, inter alia, are of great concern and importance; and the areas where polymers find applications range from microelec tronics to prosthetics. In the last decade or so, the availabil ity of various sophisticated surface analytical techniques, par ticularly ESCA, has been a boon in enhancing our knowledge of polymer surfaces. This Symposium was designed to bring together scientists and technologists interested in all aspects of polymer surfaces, to provide a forum for discussion of various ramifications of poly mer surfaces, to discover the latest developments, to provide an opportunity for cross-pollination of ideas, and to highlight areas which are in astate of rapid development and those which need intensified efforts. If the comments from attendees is any barometer of the success of an event, then this Symposium was a grand success and the above objectives were amply fulfilled.
Download or read book Polymer Surface Modification Relevance to Adhesion Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.
Download or read book Water Soluble Polymers written by Zahid Amjad and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a series of papers originally presented at the symposium on Water Soluble Polymers: Solution Properties and Applications, sponsored by the Division of Colloids and Surface Chemistry of the American Chemical Society. The symposium took place in Las Vegas City, Nevada on 9 to 11th September, 1997 at the 214th American Chemical Society National Meeting. Recognized experts in their - spective fields were invited to speak. There was a strong attendance from academia, g- ernment, and industrial research centers. The purpose of the symposium was to present and discuss recent developments in the solution properties of water soluble polymers and their applications in aqueous systems. Water soluble polymers find applications in a number of fields of which the following may be worth mentioning: cosmetics, detergent, oral care, industrial water treatment, g- thermal, wastewater treatment, water purification and reuse, pulp and paper production, sugar refining, and many more. Moreover, water soluble polymers play vital role in the oil industry, especially in enhanced oil recovery. Water soluble polymers are also used in ag- culture and controlled release pharmaceutical applications. Therefore, a fundamental kno- edge of solution properties of these polymers is essential for most industrial scientists. An understanding of the basic phenomena involved in the application of these polymers, such as adsorption and interaction with different substrates (i. e. , tooth enamel, hair, reverse - mosis membrane, heat exchanger surfaces, etc. ) is of vital importance in developing high performance formulations for achieving optimum efficiency of the system.
Download or read book Fluid Mechanics of Surfactant and Polymer Solutions written by Victor Starov and published by Springer Science & Business Media. This book was released on 2004-06-16 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal systems and dispersions are of great importance in oil recovery, waist water treatment, coating, food and beverage industry, pharmaceutical industry, medicine, environmental protection etc. Colloidal systems and dispersions are always multi-component and multiphase systems. In these systems at least one dimension is in a range of colloidal forces action: colloidal dispersions/emulsions are examples of three dimensional colloidal systems, while thin liquid films are examples of one dimensional colloidal systems. The contribution presented in this issue deals with flow, distribution and redistribution, coating and deposition of surfactant and polymer molecules in colloidal systems. The book presents reviews of recent advances and trends by well-know scientists and engineers in this area.
Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2019-12-04 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.
