Download or read book Solubility Behavior and Phase Stability of Transition Metal Oxides in Alkaline Hydrothermal Environments written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The solubility behavior of transition metal oxides in high temperature water is interpreted by recognizing three types of chemical reaction equilibria: metal oxide hydration/dehydration, metal oxide dissolution and metal ion hydroxocomplex formation. The equilibria are quantified using thermodynamic concepts and the thermochemical properties of the metal oxides/ions representative of the most common constituents of construction metal alloys, i.e., element shaving atomic numbers between Z = 22 (Ti) and Z = 30 (Zn), are summarized on the basis of metal oxide solubility studies conducted in the laboratory. Particular attention is devoted to the uncharged metal ion hydrocomplex, M{sup Z}(OH){sub Z}(aq), since its thermochemical properties define minimum solubilities of the metal oxide at a given temperature. Experimentally-extracted values of standard partial molal entropy (S°) for the transition metal ion neutral hydroxocomplex are shown to be influenced by ligand field stabilization energies and complex symmetry.
Download or read book Transition Metal Oxides written by Chintamani Nagesa Ramachandra Rao and published by VCH Publishers. This book was released on 1995 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Perovskite Materials written by Likun Pan and published by BoD – Books on Demand. This book was released on 2016-02-03 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes the current state of the know-how in the field of perovskite materials: synthesis, characterization, properties, and applications. Most chapters include a review on the actual knowledge and cutting-edge research results. Thus, this book is an essential source of reference for scientists with research fields in energy, physics, chemistry and materials. It is also a suitable reading material for graduate students.
Download or read book Magnetic Transition Metals written by Albrecht Goldmann and published by Springer. This book was released on 1999-04-14 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectron spectroscopy has matured considerably during the last decade. The experimental techniques were improved impressively and a deeper theoretical insight into the underlying mechanisms of photoemission could be achieved. The present volume III/23C2 is a critically and as comprehensive as possible tabulation of data on the bulk electronic structure of magnetic transition metals, obtained by electron and photon spectroscopies. This volume presents, besides the photoelectron results, and calculated dispersion curves, also a limited set of other data like lattice constants and work functions useful in the context of band structure information. Tables of frequently used symbols and of abbreviations are given in a general introduction where also definitions of the quantities and some historical remarks are included.
Download or read book Polymeric and Self Assembled Hydrogels written by Xian Jun Loh and published by Royal Society of Chemistry. This book was released on 2013 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book to give a complete picture of current hydrogel research, covering all the major applications as well as the fundamental principles behind them.
Download or read book Metal Oxide Chemistry and Synthesis written by Jean-Pierre Jolivet and published by John Wiley & Sons. This book was released on 2000-10-19 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precipitation of metal oxides from aqueous solutions creates nanoparticles with interesting solid state properties, thus building a bridge between solution chemistry and solid state chemistry. This book is the first monograph to deal with the formation of metal oxides from aqueous solutions with emphasis on the formation and physical chemistry of nanoparticles. Metal Oxide Chemistry and Synthesis: From Solution to Solid State * Provides a comprehensive introduction to the synthesis of finely divided materials * Presents the chemistry, physics and applications of these materials * Builds a bridge between classical solution chemistry and new developments in solid state chemistry * Introduces an important new area in inorganic chemistry Part I examines the mechanism of condensation of aqueous cations leading to polynuclear species or lattices, and rationalizes the behaviour of cations in precipitation phenomena by identifying pathways from soluble species to solids. The cation complex is also analysed in relation to the synthesis of some technologically interesting polymetallic oxides, e.g. ferroelectric, ferrimagnetic and supraconductor materials. Part II is devoted to the surface chemistry of oxide particles. The basic concepts relating to the reactivity of the oxide-solution interface are introduced and applied to various adsorption phenomena, such as aggregation, stability of particle size against ripening, etc. These properties are exploited for the synthesis of nanomaterials for a broad range of applictions such as ceramic powders, catalysts and nanocomposites. This will also be of interest to those wishing to understand geochemical and some biological processes. As well as being invaluable to researchers and postgraduate students of inorganic chemistry, this book will also be appreciated by solid-state chemists, materials scientists and colloid chemists with an interest in metal oxides.
Download or read book Handbook of Hydrothermal Technology written by K. Byrappa and published by William Andrew. This book was released on 2012-12-31 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quartz, zeolites, gemstones, perovskite type oxides, ferrite, carbon allotropes, complex coordinated compounds and many more -- all products now being produced using hydrothermal technology. Handbook of Hydrothermal Technology brings together the latest techniques in this rapidly advancing field in one exceptionally useful, long-needed volume.The handbook provides a single source for understanding how aqueous solvents or mineralizers work under temperature and pressure to dissolve and recrystallize normally insoluble materials, and decompose or recycle any waste material. The result, as the authors show in the book, is technologically the most efficient method in crystal growth, materials processing, and waste treatment. The book gives scientists and technologists an overview of the entire subject including: À Evolution of the technology from geology to widespread industrial use. À Descriptions of equipment used in the process and how it works.À Problems involved with the growth of crystals, processing of technological materials, environmental and safety issues.À Analysis of the direction of today's technology. In addition, readers get a close look at the hydrothermal synthesis of zeolites, fluorides, sulfides, tungstates, and molybdates, as well as native elements and simple oxides. Delving into the commercial production of various types, the authors clarify the effects of temperature, pressure, solvents, and various other chemical components on the hydrothermal processes. - Gives an overview of the evolution of Hydrothermal Technology from geology to widespread industrial use - Describes the equipment used in the process and how it works - Discusses problems involved with the growth of crystals, processing of technological materials, and environmental and safety issues
Download or read book 2D Metal Carbides and Nitrides MXenes written by Babak Anasori and published by Springer Nature. This book was released on 2019-10-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the rapidly expanding field of two-dimensional (2D) transition metal carbides and nitrides (MXenes). It covers fundamental knowledge on synthesis, structure, and properties of these new materials, and a description of their processing, scale-up and emerging applications. The ways in which the quickly expanding family of MXenes can outperform other novel nanomaterials in a variety of applications, spanning from energy storage and conversion to electronics; from water science to transportation; and in defense and medical applications, are discussed in detail.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1972 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Metal Oxide Nanoparticles in Organic Solvents written by Markus Niederberger and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles in Organic Solvents discusses recent advances in the chemistry involved for the controlled synthesis and assembly of metal oxide nanoparticles, the characterizations required by such nanoobjects, and their size and shape depending properties. In the last few years, a valuable alternative to the well-known aqueous sol-gel processes was developed in the form of nonaqueous solution routes. Metal Oxide Nanoparticles in Organic Solvents reviews and compares surfactant- and solvent-controlled routes, as well as providing an overview of techniques for the characterization of metal oxide nanoparticles, crystallization pathways, the physical properties of metal oxide nanoparticles, their applications in diverse fields of technology, and their assembly into larger nano- and mesostructures. Researchers and postgraduates in the fields of nanomaterials and sol-gel chemistry will appreciate this book’s informative approach to chemical formation mechanisms in relation to metal oxides.
Download or read book Study and Interpretation of the Chemical Characteristics of Natural Water 2nd Ed written by Geological Survey (U.S.) and published by . This book was released on 1961 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystal Growth Bibliography written by and published by Springer Nature. This book was released on 1981 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nagra PSI Chemical Thermodynamic Data Base 01 01 written by Wolfgang Hummel and published by Universal-Publishers. This book was released on 2002 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nagra/PSI Chemical Thermodynamic Data Base 01/01 is an encyclopedia of thermodynamic data recommended for environmental studies. The data base focuses on elements commonly found as major solutes in natural waters, and on actinides and fission products relevant for radioactive waste disposal projects. It is the official chemical thermodynamic data base used in Swiss radioactive waste disposal projects. The detailed discussion of every number recommended in this encyclopedia is the result of a multi man-year project of the Paul Scherrer Institut (PSI), a Swiss National Lab. The five authors of this work have many years of experience in research, data base development and the application of thermodynamic data in environmental studies. The data included for many elements are based on their reviews of the basic literature. The data base also includes additional data selected by the authors from recommendations of other experts in ground- water geochemistry and of the international data base project of the Nuclear Energy Agency (NEA).This report is indispensable for every scientist working in the field of environmental studies as the comprehensive source of information on the quality of the thermodynamic data governing particular problems in environmental geochemistry, especially those concerned with the fate of hazardous substances. This enables graduate students, researchers and consultants, as well as regulators and reviewers of scientific papers to assess the scientific basis of environmental modeling studies. The encyclopedia can be used as a stand-alone source of knowledge but amplereferences are provided for readers who wish to go beyond the level of discussion in the book. An electronic version of the data base and a data base management program is available for download at our homepage (http://les.web.psi.ch/TDBbook.htm).
Download or read book Chemically Deposited Nanocrystalline Metal Oxide Thin Films written by Fabian I. Ezema and published by Springer Nature. This book was released on 2021-06-26 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.
Download or read book Ceramic Abstracts written by American Ceramic Society and published by . This book was released on 1987 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of Metal Organic Framework Derived Nanomaterials and Their Electrochemical Applications written by Wei Xia and published by Springer. This book was released on 2018-04-03 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis systematically introduces readers to a new metal-organic framework approach to fabricating nanostructured materials for electrochemical applications. Based on the metal-organic framework (MOF) approach, it also demonstrates the latest ideas on how to create optimal MOF and MOF-derived nanomaterials for electrochemical reactions under controlled conditions. The thesis offers a valuable resource for researchers who want to understand electrochemical reactions at nanoscale and optimize materials from rational design to achieve enhanced electrochemical performance. It also serves as a useful reference guide to fundamental research on advanced electrochemical energy storage materials and the synthesis of nanostructured materials.
Download or read book Chemical Thermodynamics of Nickel written by and published by Elsevier. This book was released on 2005-04-08 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to quantitatively predict the chemical reactions that hazardous materials may undergo in the environment, it is necessary to know the relative stabilities of the compounds and complexes that may be found under certain conditions. This type of calculations may be done using consistent chemical thermodynamic data, such as those contained in this book for inorganic compounds and complexes of nickel.* Fully detailed authoritative critical review of literature.* Integrated into a comprehensive and consistent database for waste management applications.* CD ROM version.
