Download or read book SOLIDWORKS 2024 A Power Guide for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on 2024-01-20 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2024: A Power Guide for Beginners and Intermediate Users textbook is designed for both instructor-led courses and self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS for creating 3D mechanical designs. This is a valuable resource for new SOLIDWORKS users and a great teaching tool for classroom training. With 14 chapters and a total of 780 pages, the content extensively covers key SOLIDWORKS environments such as Sketching, Part Modeling, Assembly, and Drawing. This textbook teaches users to use SOLIDWORKS mechanical design software for creating parametric 3D solid components, assemblies, and 2D drawings. Additionally, a dedicated chapter is included to guide users in creating multiple configurations of a design. This textbook not only focuses on the usage of the tools and commands of SOLIDWORKS but also the concept of design. Every chapter in this textbook contains tutorials that provide users with step-by-step instructions for creating mechanical designs and drawings with ease. Additionally, every chapter ends with practical hands-on test drives that allow users to experience the user-friendly and powerful technical capabilities of SOLIDWORKS.

Download or read book Solidworks 2024 written by Cadartifex and published by . This book was released on 2024-03-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2024: A Power Guide for Beginners and Intermediate Users textbook is designed for both instructor-led courses and self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS for creating 3D mechanical designs. This is a valuable resource for new SOLIDWORKS users and a great teaching tool for classroom training. With 14 chapters and a total of 780 pages, the content extensively covers key SOLIDWORKS environments such as Sketching, Part Modeling, Assembly, and Drawing. This textbook teaches users to use SOLIDWORKS mechanical design software for creating parametric 3D solid components, assemblies, and 2D drawings. Additionally, a dedicated chapter is included to guide users in creating multiple configurations of a design. This textbook not only focuses on the usage of the tools and commands of SOLIDWORKS but also the concept of design. Every chapter in this textbook contains tutorials that provide users with step-by-step instructions for creating mechanical designs and drawings with ease. Additionally, every chapter ends with practical hands-on test drives that allow users to experience the user-friendly and powerful technical capabilities of SOLIDWORKS. Table of Contents: Chapter 1. Introduction to SOLIDWORKS Chapter 2. Drawing Sketches with SOLIDWORKS Chapter 3. Editing and Modifying Sketches Chapter 4. Applying Geometric Relations and Dimensions Chapter 5. Creating Base Features of Solid Models Chapter 6. Creating Reference Geometries Chapter 7. Advanced Modeling - I Chapter 8. Advanced Modeling - II Chapter 9. Patterning and Mirroring Chapter 10. Advanced Modeling - III Chapter 11. Working with Configurations Chapter 12. Working with Assemblies - I Chapter 13. Working with Assemblies - II Chapter 14. Working with Drawings

Download or read book SOLIDWORKS Simulation 2024 A Power Guide for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on 2024-03-07 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS Simulation 2024: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses and self-paced learning. It is intended to help engineers and designers interested in learning Finite Element Analysis (FEA) using SOLIDWORKS Simulation. This textbook benefits new SOLIDWORKS Simulation users and is a great teaching aid in classroom training. It consists of 10 chapters, with a total of 398 pages covering various types of Finite Element Analysis (FEA) such as Linear Static Analysis, Buckling Analysis, Fatigue Analysis, Frequency Analysis, Drop Test Analysis, and Non-linear Static Analysis. This textbook covers important concepts and methods used in Finite Element Analysis (FEA) such as Preparing Geometry, Boundary Conditions (load and fixture), Element Types, Interactions, Connectors, Meshing, Mesh Controls, Mesh Check (Aspect Ratio check and Jacobian check), Adaptive Meshing (H-Adaptive and P-Adaptive), Iterative Methods (Newton-Raphson Scheme and Modified Newton-Raphson Scheme), Incremental Methods (Force, Displacement, or Arc Length), and so on. This textbook not only focuses on using the tools of SOLIDWORKS Simulation but also on the fundamentals of Finite Element Analysis (FEA) through various real-world case studies. The case studies used in this textbook allow users to solve various real-world engineering problems by using SOLIDWORKS Simulation step-by-step. Also, the Hands-on test drives given at the end of chapters allow users to experience the ease of use and immense capacities of SOLIDWORKS Simulation.

Download or read book SOLIDWORKS 2021 A Power Guide for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2021: A Power Guide for Beginners and Intermediate Users textbook has been designed for instructor-led courses as well as self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS for creating 3D mechanical design. This textbook is a great help for new SOLIDWORKS users and a great teaching aid in classroom training. This textbook consists of 14 chapters, with a total of 798 pages covering the major environments of SOLIDWORKS such as Sketching environment, Part modeling environment, Assembly environment, and Drawing environment. This textbook teaches users to use SOLIDWORKS mechanical design software for creating parametric 3D solid components, assemblies, and 2D drawings. This textbook also includes a chapter on creating multiple configurations of a design. This textbook not only focuses on the usage of the tools and commands of SOLIDWORKS but also on the concept of design. Every chapter in this textbook contains tutorials that provide users with step-by-step instructions for creating mechanical designs and drawings with ease. Moreover, every chapter ends with hands-on test drives which allow users to experience the user friendly and technical capabilities of SOLIDWORKS.

Download or read book AutoCAD 2024 A Power Guide for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: AutoCAD 2024: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers, designers, and CAD operators interested in learning AutoCAD for creating 2D engineering drawings as well as 3D Models. This textbook is a great help for new AutoCAD users and a great teaching aid for classroom training. The textbook consists of 13 chapters, and a total of 548 pages covering major workspaces of AutoCAD such as Drafting & Annotation and 3D Modeling, teaching you to use AutoCAD software for creating, editing, plotting, and managing real world 2D engineering drawings and 3D Models. This textbook not only focuses on the usage of the tools/commands of AutoCAD but also on the concept of design. Every chapter of this textbook contains tutorials that provide users with step-by-step instructions on how to easily create mechanical designs and drawings. Moreover, every chapter ends with hands-on test drives allowing users to experience AutoCAD’s user-friendly and powerful capabilities.

Download or read book Creo Parametric 11 0 A Power Guide for Beginners and Intermediate Users written by CADArtifex and published by CADArtifex. This book was released on 2024-08-29 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creo Parametric 11.0: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses and self-paced learning. It is intended to help engineers and designers interested in learning Creo Parametric to create 3D mechanical designs. This textbook benefits new Creo users and is a great teaching aid in classroom training. It consists of 12 chapters, with a total of 738 pages covering the major modes of Creo Parametric such as the Sketch, Part, Assembly, and Drawing modes. The textbook teaches users to use Creo Parametric mechanical design software for building parametric 3D solid components, assemblies, and 2D drawings. This textbook not only focuses on using the tools/commands of Creo Parametric but also the concept of design. Each chapter of this textbook contains tutorials that help users to operate Creo Parametric step-by-step easily. Moreover, each chapter ends with hands-on test drives which allow users to experience the user-friendly and technical capabilities of Creo Parametric.

Download or read book AutoCAD 2025 A Power Guide for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: AutoCAD 2025: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers, designers, and CAD operators interested in learning AutoCAD to create 2D engineering drawings as well as 3D Models. This textbook is a great help for new AutoCAD users and a great teaching aid for classroom training. The textbook consists of 13 chapters, and a total of 550 pages covering major workspaces of AutoCAD such as Drafting & Annotation and 3D Modeling, teaching you to use AutoCAD software for creating, editing, plotting, and managing real-world 2D engineering drawings and 3D Models. This textbook not only focuses on the usage of the tools/commands of AutoCAD but also the concept of design. Every chapter of this textbook contains tutorials that provide users with step-by-step instructions on how to easily create mechanical designs and drawings. Moreover, every chapter ends with hands-on test drives allowing users to experience AutoCAD's user-friendly and powerful capabilities. Table of Contents Chapter 1. Introduction to AutoCAD Chapter 2. Creating Drawings - I Chapter 3. Working with Drawing Aids and Layers Chapter 4. Creating Drawings - II Chapter 5. Modifying and Editing Drawings - I Chapter 6. Working with Dimensions and Dimensions Style Chapter 7. Editing Dimensions and Adding Text Chapter 8. Modifying and Editing Drawings - II Chapter 9. Hatching and Gradients Chapter 10. Working with Blocks and Xrefs Chapter 11. Working with Layouts Chapter 12. Printing and Plotting Chapter 13. Introducing 3D Basics and Creating 3D Models

Download or read book Autodesk Inventor 2025 A Power Guide for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on 2024-06-26 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk Inventor 2025: A Power Guide for Beginners and Intermediate Users has been designed for both instructor-led courses and self-paced learning. This textbook aims to assist engineers and designers interested in learning Autodesk Inventor to create 3D mechanical designs. It is an excellent guide for new Inventor users and a valuable teaching aid for classroom training. The textbook consists of 14 chapters and a total of 794 pages, covering major environments of Autodesk Inventor, such as the Sketching environment, Part modeling environment, Assembly environment, Presentation environment, and Drawing environment. It teaches you how to use Autodesk Inventor mechanical design software to build parametric 3D solid components and assemblies, as well as create animations and 2D drawings. This textbook not only focuses on the usage of the tools and commands of Autodesk Inventor but also on the concept of design. Each chapter contains tutorials that provide step-by-step instructions for creating mechanical designs and drawings with ease. Additionally, every chapter ends with hands-on test drives that allow users to experience the user-friendly and powerful technical capabilities of Autodesk Inventor. Table of Contents: Chapter 1. Introduction to Autodesk Inventor Chapter 2. Drawing Sketches with Autodesk Inventor Chapter 3. Editing and Modifying Sketches Chapter 4. Applying Constraints and Dimensions Chapter 5. Creating Base Features of Solid Models Chapter 6. Creating Work Features Chapter 7. Advanced Modeling - I Chapter 8. Advanced Modeling - II Chapter 9. Patterning and Mirroring Chapter 10. Advanced Modeling - III Chapter 11. Working with Assemblies - I Chapter 12. Working with Assemblies - II Chapter 13. Creating Animation and Exploded Views Chapter 14. Working with Drawings

Download or read book FreeCAD 0 20 A Power Guide for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on 2023-07-26 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: FreeCAD 0.20: A Power Guide for Beginners and Intermediate Users textbook has been designed for instructor-led courses as well as self-paced learning. It is intended to help engineers and designers interested in learning FreeCAD to create 3D mechanical designs. This textbook is an excellent guide for new FreeCAD users and a great teaching aid for classroom training. It consists of 10 chapters and a total of 446 pages covering major workbenches of FreeCAD such as Sketcher, Part Design, A2plus, and TechDraw. The textbook teaches you to use FreeCAD mechanical design software for building parametric 3D solid components and assemblies as well as creating 2D drawings. This textbook not only focuses on the usage of the tools/commands of FreeCAD but also the concept of design. Every chapter in this textbook contains tutorials that provide users with step-by-step instructions for creating mechanical designs and drawings with ease. Moreover, every chapter ends with hands-on test drives that allow users to experience the user-friendly and powerful technical capabilities of FreeCAD.

Download or read book SOLIDWORKS Simulation 2024 written by Cadartifex and published by . This book was released on 2024-03-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS Simulation 2024: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses and self-paced learning. It is intended to help engineers and designers interested in learning Finite Element Analysis (FEA) using SOLIDWORKS Simulation. This textbook benefits new SOLIDWORKS Simulation users and is a great teaching aid in classroom training. It consists of 10 chapters, with a total of 398 pages covering various types of Finite Element Analysis (FEA) such as Linear Static Analysis, Buckling Analysis, Fatigue Analysis, Frequency Analysis, Drop Test Analysis, and Non-linear Static Analysis. This textbook covers important concepts and methods used in Finite Element Analysis (FEA) such as Preparing Geometry, Boundary Conditions (load and fixture), Element Types, Interactions, Connectors, Meshing, Mesh Controls, Mesh Check (Aspect Ratio check and Jacobian check), Adaptive Meshing (H-Adaptive and P-Adaptive), Iterative Methods (Newton-Raphson Scheme and Modified Newton-Raphson Scheme), Incremental Methods (Force, Displacement, or Arc Length), and so on. This textbook not only focuses on using the tools of SOLIDWORKS Simulation but also on the fundamentals of Finite Element Analysis (FEA) through various real-world case studies. The case studies used in this textbook allow users to solve various real-world engineering problems by using SOLIDWORKS Simulation step-by-step. Also, the Hands-on test drives given at the end of chapters allow users to experience the ease of use and immense capacities of SOLIDWORKS Simulation. Table of Contents Chapter 1. Introduction to FEA and SOLIDWORKS Simulation Chapter 2. Introduction to Analysis Tools and Static Analysis Chapter 3. Case Studies of Static Analysis Chapter 4. Interactions and Connectors Chapter 5. Adaptive Mesh Methods Chapter 6. Buckling Analysis Chapter 7. Fatigue Analysis Chapter 8. Frequency Analysis Chapter 9. Drop Test Analysis Chapter 10. Non-Linear Static Analysis Main Features of the Textbook Comprehensive coverage of tools Step-by-step real-world case studies Hands-on test drives to enhance the skills at the end of chapters Additional notes and tips Customized content for faculty (PowerPoint Presentations) Free learning resources for students and faculty Technical support for the book: [email protected]

Download or read book SOLIDWORKS Sheet Metal and Surface Design 2024 for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on 2024-04-12 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS Sheet Metal and Surface Design 2024 for Beginners and Intermediate Users textbook has been designed for instructor-led courses and self-paced learning. It intends to help engineers and designers interested in learning SOLIDWORKS to create real-world sheet metal components and surface designs. This textbook is a great help for SOLIDWORKS users new to sheet metal and surface designs. It consists of a total of 224 pages covering the sheet metal and surface design environments of SOLIDWORKS. It teaches users to use SOLIDWORKS mechanical design software for creating parametric 3D sheet metal components and complex shapes of surface models. This textbook not only focuses on using the tools and commands of SOLIDWORKS for creating sheet metal components and surface models but also on the concept of design. It contains theory followed by tutorials that provide users with step-by-step instructions for creating sheet metal components and surface models. Moreover, it ends with Hands-on Test Drives that allow users to experience the user-friendly interface and technical capabilities of SOLIDWORKS. Main Features of the Textbook Comprehensive coverage of tools Step-by-step real-world tutorials with every chapter Hands-on test drives to enhance the skills at the end of every chapter Additional notes and tips Customized content for faculty (PowerPoint Presentations) Free learning resources for faculty and students Additional student and faculty projects Technical support for the book by contacting [email protected]

Download or read book SOLIDWORKS 2023 A Power Guide for Beginners and Intermediate Users written by Sandeep Dogra and published by CADArtifex. This book was released on with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2023: A Power Guide for Beginners and Intermediate Users textbook has been designed for instructor-led courses as well as self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS for creating 3D mechanical designs. This textbook is a great help for new SOLIDWORKS users and a great teaching aid in classroom training. This textbook consists of 14 chapters, with a total of 780 pages covering the major environments of SOLIDWORKS such as Sketching environment, Part modeling environment, Assembly environment, and Drawing environment. This textbook teaches users to use SOLIDWORKS mechanical design software for creating parametric 3D solid components, assemblies, and 2D drawings. This textbook also includes a chapter on creating multiple configurations of a design. This textbook not only focuses on the usage of the tools and commands of SOLIDWORKS but also on the concept of design. Every chapter in this textbook contains tutorials that provide users with step-by-step instructions for creating mechanical designs and drawings with ease. Moreover, every chapter ends with hands-on test drives which allow users to experience the user friendly and technical capabilities of SOLIDWORKS. Table of Contents: Chapter 1. Introduction to SOLIDWORKS Chapter 2. Drawing Sketches with SOLIDWORKS Chapter 3. Editing and Modifying Sketches Chapter 4. Applying Geometric Relations and Dimensions Chapter 5. Creating Base Feature of Solid Models Chapter 6. Creating Reference Geometries Chapter 7. Advanced Modeling - I Chapter 8. Advanced Modeling - II Chapter 9. Patterning and Mirroring Chapter 10. Advanced Modeling - III Chapter 11. Working with Configurations Chapter 12. Working with Assemblies - I Chapter 13. Working with Assemblies - II Chapter 14. Working with Drawings

Download or read book SOLIDWORKS Simulation 2019 written by John Willis and published by . This book was released on 2019-07-04 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Black & White Edition. The Full Color Edition is also available SOLIDWORKS Simulation 2019: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers and designers interested in learning finite element analysis (FEA) using SOLIDWORKS Simulation. This textbook benefits new SOLIDWORKS Simulation users and is a great teaching aid in classroom training. It consists of 10 chapters, total 394 pages covering various types of finite element analysis (FEA) such as Linear Static Analysis, Buckling Analysis, Fatigue Analysis, Frequency Analysis, Drop Test Analysis, and Non-linear Static Analysis. This textbook covers important concepts and methods used in finite element analysis (FEA) such as Preparing Geometry, Boundary Conditions (load and fixture), Element Types, Contacts, Connectors, Meshing, Mesh Controls, Mesh Quality Check (Jacobian Check and Aspect Ratio), Adaptive Meshing (H-Adaptive and P-Adaptive), Iterative Methods (Newton-Raphson Scheme and Modified Newton-Raphson Scheme), Incremental Methods (Force, Displacement, or Arc Length), and so on. This textbook not only focuses on the usages of the tools of SOLIDWORKS Simulation but also on the fundamentals of finite element analysis (FEA) through various real-world case studies. The case studies used in this textbook allow users to solve various real-world engineering problems, step-by-step. Moreover, the Hands-on test drives are given at the end of the chapters which allow users to experience the user friendly and technical capabilities of SOLIDWORKS Simulation. Every chapter begins with learning objectives related to the topics covered in that chapter. Moreover, every chapter ends with a summary which lists the topics learned in that chapter followed by questions to assess the knowledge. Table of Contents: Chapter 1. Introduction to FEA and SOLIDWORKS Simulation Chapter 2. Introduction to Analysis Tools and Static Analysis Chapter 3. Case Studies of Static Analysis Chapter 4. Contacts and Connectors Chapter 5. Adaptive Mesh Methods Chapter 6. Buckling Analysis Chapter 7. Fatigue Analysis Chapter 8. Frequency Analysis Chapter 9. Drop Test Analysis Chapter 10. Non-Linear Static Analysis Main Features of the d104book Comprehensive coverage of tools Step-by-step real-world case studies Hands-on test drives to enhance the skills at the end of chapters Additional notes and tips Customized content for faculty (PowerPoint Presentations) Free learning resources for students and faculty Technical support for the book: [email protected]

Download or read book Beginner s Guide to SOLIDWORKS 2021 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on 2021-01-15 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help new users learn the basic concepts of SOLIDWORKS and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SOLIDWORKS or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SOLIDWORKS interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. Throughout this book the author introduces you to new commands that are required to pass the Certified SOLIDWORKS Associate exam, as listed on the SOLIDWORKS website. A dedicated chapter provides you with details about the exam, as well as a practice test to help you prepare for the actual exam. SOLIDWORKS is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands.

Download or read book Beginner s Guide to SOLIDWORKS 2024 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Designed to teach new users the basic concepts of SOLIDWORKS and good solid modeling techniques • Uses a task oriented approach to learning SOLIDWORKS • Focuses on the processes to complete the modeling of a part, instead of individual commands • Includes access to extensive video instruction • Covers commands found on the CSWA exam and includes a practice test This book is intended to help new users learn the basic concepts of SOLIDWORKS and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SOLIDWORKS or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SOLIDWORKS interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. Throughout this book the author introduces you to new commands that are required to pass the Certified SOLIDWORKS Associate exam, as listed on the SOLIDWORKS website. A dedicated chapter provides you with details about the exam, as well as a practice test to help you prepare for the actual exam. SOLIDWORKS is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands. Includes Video Instruction Each copy of this book includes access to video instruction. In these videos the author provides a clear presentation of tutorials found in the book. The videos reinforce the steps described in the book by allowing you to watch the exact steps the author uses to complete the exercises while he provides additional details along the way. Captioned versions of these videos are also available for customers who want or need video captions.

Download or read book SOLIDWORKS 2022 written by Sandeep Dogra and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mastering SolidWorks written by Matt Lombard and published by John Wiley & Sons. This book was released on 2018-10-29 with total page 2082 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete SolidWorks reference-tutorial for beginner to advanced techniques Mastering SolidWorks is the reference-tutorial for all users. Packed with step-by-step instructions, video tutorials for over 40 chapters, and coverage of little-known techniques, this book takes you from novice to power user with clear instruction that goes beyond the basics. Fundamental techniques are detailed with real-world examples for hands-on learning, and the companion website provides tutorial files for all exercises. Even veteran users will find value in new techniques that make familiar tasks faster, easier, and more organized, including advanced file management tools that simplify and streamline pre-flight checks. SolidWorks is the leading 3D CAD program, and is an essential tool for engineers, mechanical designers, industrial designers, and drafters around the world. User friendly features such as drag-and-drop, point-and-click, and cut-and-paste tools belie the software’s powerful capabilities that can help you create cleaner, more precise, more polished designs in a fraction of the time. This book is the comprehensive reference every SolidWorks user needs, with tutorials, background, and more for beginner to advanced techniques. Get a grasp on fundamental SolidWorks 2D and 3D tasks using realistic examples with text-based tutorials Delve into advanced functionality and capabilities not commonly covered by how-to guides Incorporate improved search, Pack-and-Go and other file management tools into your workflow Adopt best practices and exclusive techniques you won’t find anywhere else Work through this book beginning-to-end as a complete SolidWorks course, or dip in as needed to learn new techniques and time-saving tricks on-demand. Organized for efficiency and designed for practicality, these tips will remain useful at any stage of expertise. With exclusive coverage and informative detail, Mastering SolidWorks is the tutorial-reference for users at every level of expertise.