Download or read book Solid State Surface and Catalytic Studies of Oxides written by and published by . This book was released on 2004 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project investigates the catalytic properties of oxides for the selective oxidative dehydrogenation of light alkanes and for hydrocarbon reduction of NO(subscript x). Various vanadium oxide based catalysts were investigated to elucidate the relationship between the chemical and structural properties of the catalysts and their selectivity for the formation of alkenes. It was found that vanadium oxide units that are less reducible give higher selectivities. For hydrocarbon reduction of NO(subscript x), it was found that alumina-based catalysts can be effective at higher temperatures than the corresponding zeolite-based catalysts. On some catalysts, such as SnO2/Al2O3. Ag/Al2O3, the alumina participates directly in the reaction, making the catalyst bifunctional. These results are useful in research to improve the performance of this stress of catalysts.
Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.
Download or read book Transition Metal Oxides written by H.H. Kung and published by Elsevier. This book was released on 1989-04-01 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the author presents an up-to-date summary of existing information on the structure, electronic properties, chemistry and catalytic properties of transition metal oxides.The subjects covered in the book can be divided into three sections. The first (chapters 1 to 3) covers the structural, physical, magnetic, and electronic properties of transition metal oxides. Although the emphasis is on surface properties, relevant bulk properties are also discussed. The second section (chapters 4 to 7) covers surface chemical properties. It includes topics that describe the importance of surface coordinative unsaturation in adsorption, the formation of surface acidity and the role of acidity in determining surface chemical properties, the nature and reactivities of adsorbed oxygen, and the surface chemistry in the reduction of oxides. The third section (chapters 8 to 14) is on the catalytic properties. Various catalytic reactions including decomposition, hydrogenation, isomerization, metathesis, selective oxidation, and reactions involving carbon oxides are discussed. Emphasis is placed more on reaction mechanisms and the role of catalysts than on kinetics and processes. Chapters on the preparation of oxide catalysts and on photo-assisted processes are also included. Whenever appropriate, relationships between various topics are indicated.Written for surface physicists, chemists, and catalytic engineers, the book will serve as a useful source of information for investigators and as a comprehensive overview of the subject for graduate students.
Download or read book Heterogeneous Catalytic Materials written by Guido Busca and published by Newnes. This book was released on 2014-05-23 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalytic Materials discusses experimental methods and the latest developments in three areas of research: heterogeneous catalysis; surface chemistry; and the chemistry of catalysts. Catalytic materials are those solids that allow the chemical reaction to occur efficiently and cost-effectively. This book provides you with all necessary information to synthesize, characterize, and relate the properties of a catalyst to its behavior, enabling you to select the appropriate catalyst for the process and reactor system. Oxides (used both as catalysts and as supports for catalysts), mixed and complex oxides and salts, halides, sulfides, carbides, and unsupported and supported metals are all considered. The book encompasses applications in industrial chemistry, refinery, petrochemistry, biomass conversion, energy production, and environmental protection technologies. - Provides a systematic and clear approach of the synthesis, solid state chemistry and surface chemistry of all solid state catalysts - Covers widely used instrumental techniques for catalyst characterization, such as x-ray photoelectron spectroscopy, scanning electron microscopy, and more - Includes characterization methods and lists all catalytic behavior of the solid state catalysts - Discusses new developments in nanocatalysts and their advantages over conventional catalysts
Download or read book Solid State Surface and Catalytic Properties of Oxides Progress Report October 1 1979 October 31 1980 written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental studies on oxide catalysts have been conducted with emphasis on the investigation of the properties of anion and cation vacancies on an oxide surface, on the characterization of an adsorbed oxygen species on an oxide, and on the determination of surface cation densities in solid oxide solutions. An automically well ordered surface of ZnO has been successfully prepared on which a high density of sites resembling those of the anion vacancy is present. Such a surface adsorbs oxygen and methanol more strongly, yet carbon dioxide more weakly than a stoichiometric nonpolar surface. From the kinetics of adsorption and desorption, evidence of an atomic adsorption of oxygen on iron oxide has been observed. The adsorption of this species is activated, and its desorption follows a bimolecular rate law. Attempts are being made to obtain the activation energies of adsorption and desorption, and the saturation coverage of the species. Its reaction with hydrocarbons will be studied later. The surface cation densities of Fe and Cr on a series of solid solutions of Fe2O3-Cr2O3 were determined. It was found that Fe was enriched on the surface at low Fe contents, but depleted from the surface at high Fe contents. The surface Cr on air treated samples is Cr(VI). Calculation on the surface cation densities of oxide solid solutions of cubic structure was performed using a pairwise potential, and a statistical model for the surface layer. For dilute bulk solutions, the larger cation is found to be enriched on the surface.
Download or read book Nanoporous Materials III written by M. Jaroniec and published by Elsevier. This book was released on 2002-05-15 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoporous Materials III contains the invited lectures and peer-reviewed oral and poster contributions to be presented at the 3rd Conference on Nanoporous Materials, which will be hosted in Ottawa, Canada, June 2002. The work covers complementary approaches to and recent advances in the field of nanostructured materials with pore sizes larger than 1nm, such as periodic mesoporous molecular sieves M41S and FSM16 and related materials including clays, carbon molecular sieves, colloidal crystal templated organic and inorganic materials, porous polymers and sol gels. The broad range of topics covered in relation to the synthesis and characterization of ordered mesoporous materials are of great importance for advanced adsorption, catalytic and separation processes as well as the development of nanotechnology. The contents of this title are based on topics to be discussed by invited lecturers, which deal with periodic mesoporous organosilicas, stability and catalytic activity of aluminosilicate mesostructures, electron microscopy studies of ordered materials, imprinted polymers and highly porous metal-organic frameworks. The other contributions deal with tailoring the surface and structural properties of nanoporous materials, giving a detailed characterization as well as demonstrating their usefulness for advanced adsorption and catalytic applications.
Download or read book Scientific Bases for the Preparation of Heterogeneous Catalysts written by E. Gaigneaux and published by Elsevier. This book was released on 2002-08-29 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become a tradition that every four years, the Université Catholique de Louvain and the Katholieke Universiteit Leuven jointly organize a symposium devoted to the scientific bases for the preparation of heterogeneous catalysts. These meetings bring together researchers from academia and industry and offer a forum for discussions on the chemistry involved in the preparation of industrial heterogeneous catalysts. This volume containing the Proceedings of the 8th International Symposium on Scientific Bases for the Preparation of Heterogeneous Catalysts consists of papers summarizing most of the 139 oral communications and posters selected by the international scientific committee, composed of 27 experts in the field of catalyst preparation, holding an industrial or academia appointment.The contributions focus on the aspects of catalyst preparation. The main topics are: new approaches in catalyst preparation; advanced preparations of nanoporous and mesoporous catalysts; catalysts preparation for special performances and purposes; catalysts for environmental purposes; and molecular catalysis. Emphasis is put on the role that catalysis can play as an essential element of sustainable development.
Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Download or read book Heterogeneous Catalysis of Mixed Oxides written by M. Misono and published by Newnes. This book was released on 2013-02-28 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed oxides are the most widely used catalyst materials for industrial catalytic processes. The principal objective of this book is to describe systematically the mixed oxide catalysts, from their fundamentals through their practical applications. After describing concisely general items concerning mixed oxide and mixed oxide catalysts, two important mixed oxide catalyst materials, namely, heteropolyacids and perovskites, are taken as typical examples and discussed in detail. These two materials have several advantages: 1. They are, respectively, typical examples of salts of oxoacids and double oxide, that is, the two main categories of mixed oxides in solid state chemistry. 2. Both exhibit excellent catalytic performance in nearly crystalline state and are used in several industrial applications. 3. They have studied for many years. In addition, metal oxides functioning as a catalyst support (carrier) are included. Although the supports are very important in practical applications, and tremendous progress has been made in the past decades, few systematic reviews exist. It is notable that heteropolyacids and perovskite exhibit unique performance when used as a support. Fundamental catalytic science and technology and solid state chemistry necessary is presented for the proper understanding of mixed oxide catalysts as well as for R&D. For the latter, the concept of design of practical catalysts is very important. This is considered throughout the book. - Systematically describes design principles of mixed oxide catalysts - Shows how catalysis and solid-state chemistry of metal oxides are inter-related - Covers all useful basic concepts of mixed oxide catalysis
Download or read book Surface and Near surface Chemistry of Oxide Materials written by Janusz Nowotny and published by Elsevier Publishing Company. This book was released on 1988 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to fill the gap in the scientific literature by providing a comprehensive overview on the surface and near-surface chemistry of oxide materials. Oxide materials are important in a wide range of technological applications, which has resulted in a large bibliography devoted to their properties. The range of practical applications of metal oxides has recently been significantly extended by the discovery of high T c oxide superconductors. Surface chemistry overlaps with several other disciplines and involves some specialized physical methods, therefore renown scientists active in various fields were invited to contribute to the book. The present volume involves surface characterization of metal oxides as well as surface and near-surface phenomena including gas-solid, solid-solid and liquid-solid interphases. Both basic problems and applied aspects are covered. The theoretical background of ideal and real surfaces as well as surface phenomena such as adsorption, segregation, interphase interactions, equilibration, etc., are dealt with. A comprehensive description is given of the most useful experimental techniques for studying surface and near-surface (grain boundary) chemistry of ceramic materials, oxide catalysts, semiconductors and other oxide materials of practical importance. The range of practical applications of metal oxides has recently been significantly extended by the discovery of high T c oxide superconductors. A special chapter is devoted to High T c oxide superconductors, which provides an up-to-date and thorough review of this currently ''hot topic'' which will be of great interest to a wide section of the scientific community.
Download or read book Surface Chemistry and Catalysis written by Albert F. Carley and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2001 Wyn Roberts celebrated both his 70th birthday and 50 years of working in surface science, to use the term "surface science" in its broadest meaning. This book aims to mark the anniversary with a contribution of lasting value, something more than the usual festschrift issue of a relevant journal. The book is divided into three sections: Surface Science, Model Catalysts and Catalysis, topics in which Wyn has always had interests. The authors for each chapter were chosen from some of the many eminent scientists who have worked with Wyn in various ways and are all internationally acknowledged as leaders in their field. The authors have produced authoritative reviews of their own specialties which together result in a book with an unrivalled combination of breadth and depth exploring the most recent developments in surface chemistry and catalysis.
Download or read book Adsorption and Catalysis on Oxide Surfaces written by M. Che and published by Elsevier. This book was released on 1985-07-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium was held to honour the memory of the late Dr. A.J. Tench who made numerous important contributions to our knowledge of the structure, reactivity and adsorption properties of oxide surfaces. This volume contains an up-to-date picture of adsorption and catalysis on oxide surfaces, not in the form of a comprehensive review but in its living aspects of work in progress. It describes detailed studies on the determination of the coordination surface ions, particularly oxide ions, by photoluminescence and reflectance spectroscopy, on the identification of adsorbed species by magnetic optical or surface techniques and on catalysis, with emphasis on new concepts such as catalysis involving excited states or structure sensitive reactions.Professionals working in the industrial and academic laboratories will find the book particularly useful as it provides a state-of-the-art account of our understanding of the structure and adsorption characteristics of oxide surfaces. Contained in the book are first class research papers by leading exponents in this field. A very important issue is that the book highlights for the first time the importance of excited states and structure sensitivity in determining the behaviour of oxide surfaces.
Download or read book Material Concepts in Surface Reactivity and Catalysis written by Henry Wise and published by Elsevier. This book was released on 2012-12-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material Concepts in Surface Reactivity and Catalysis focuses on the physical and chemical properties of the surface in a reacting system, identifying surface properties that influence interfacial reactions in metal and nonmetal systems. This book discusses the bulk and surface imperfections, surface energy of multicomponent systems, adsorption isotherms and isosteres, and Lennard-Jones potential curves. The adsorbate-induced surface reconstruction, metal-support reactions, defect thermodynamics, and defect metal oxides with crystallographic shear structures are also elaborated. This text likewise covers the metal oxide catalysis, component segregation at grain boundaries, diffusion-controlled metal oxidation, and kinetics of metal deposition. This publication is useful to students in materials science, solid-state chemistry, and catalysis, as well as specialists engaged in research.
Download or read book Metal Oxide Chemistry and Synthesis written by Jean-Pierre Jolivet and published by John Wiley & Sons. This book was released on 2000-10-19 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precipitation of metal oxides from aqueous solutions creates nanoparticles with interesting solid state properties, thus building a bridge between solution chemistry and solid state chemistry. This book is the first monograph to deal with the formation of metal oxides from aqueous solutions with emphasis on the formation and physical chemistry of nanoparticles. Metal Oxide Chemistry and Synthesis: From Solution to Solid State * Provides a comprehensive introduction to the synthesis of finely divided materials * Presents the chemistry, physics and applications of these materials * Builds a bridge between classical solution chemistry and new developments in solid state chemistry * Introduces an important new area in inorganic chemistry Part I examines the mechanism of condensation of aqueous cations leading to polynuclear species or lattices, and rationalizes the behaviour of cations in precipitation phenomena by identifying pathways from soluble species to solids. The cation complex is also analysed in relation to the synthesis of some technologically interesting polymetallic oxides, e.g. ferroelectric, ferrimagnetic and supraconductor materials. Part II is devoted to the surface chemistry of oxide particles. The basic concepts relating to the reactivity of the oxide-solution interface are introduced and applied to various adsorption phenomena, such as aggregation, stability of particle size against ripening, etc. These properties are exploited for the synthesis of nanomaterials for a broad range of applictions such as ceramic powders, catalysts and nanocomposites. This will also be of interest to those wishing to understand geochemical and some biological processes. As well as being invaluable to researchers and postgraduate students of inorganic chemistry, this book will also be appreciated by solid-state chemists, materials scientists and colloid chemists with an interest in metal oxides.
Download or read book Properties and Applications of Perovskite Type Oxides written by L.G. Tejuca and published by CRC Press. This book was released on 2000-10-17 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference offers an overview of the bulk and surface properties of perovskite-like structures, and provides the latest discussions on the applications of these materials and processes. It also introduces ceramic methods for the processing of perovskite-derived high Tc cuprates.;Examining every available procedure for synthesizing high-surface-area perovskite oxides, this book: delineates processing techniques for preparing perovskite-derived high-critical-temperature superconductors; illustrates the relevance of physiochemical methods to investigate bulk and surface structures of perovskite compounds; explicates the importance of surface composition in the context of catalytic behaviour; summarizes methods of changing stoichiometry; shows how to design perovskite oxides for a given purpose; reviews key solid-state properties; and presents the major applications.
Download or read book Introduction to Zeolite Science and Practice written by E.M. Flanigen and published by Elsevier. This book was released on 1991-02-05 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zeolites and related molecular sieves have quickly become important pathways to new opportunities in the fields of oil processing and petrochemical synthesis. The signs of intense activity in both industry and academia are evident: burgeoning papers and patent applications; increasing numbers of industrial zeolite-based processes and their rapid expansion into organic chemicals manufacturing; recent progress in zeolite accessibility range, matrix behaviour, lattice components and satellite structures; and the recognition that zeolites, which are stable and can be regenerated, may be incorporated into new, environmentally friendly processes. This volume offers a thorough, up-to-date introduction to zeolites and such related materials as crystalline aluminium phosphates and clays. Its 16 chapters, each written by specialists, provide detailed treatments of zeolite theory (including a review of major developments), zeolite laboratory and research practice, and zeolite industry applications. Students and individuals entering the field will find Introduction to Zeolite Science and Practice a thorough guidebook. Experienced researchers will appreciate its in-depth coverage of the zeolite spectrum, including the latest views on zeolite structure, characterization and applications.
Download or read book The Surface Science of Metal Oxides written by Victor E. Henrich and published by Cambridge University Press. This book was released on 1994 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
