Download or read book MEMS Mirrors written by Huikai Xie (Ed.) and published by . This book was released on 2018 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS mirrors can steer, modulate and switch light, as well as control the wavefront for focusing or phase modulation. MEMS mirrors have found enormous commercial success in projectors, displays and fiberoptic communications. Micro-spectrometers based on MEMS mirrors are starting to appear in the consumer market. There are also many breakthroughs in applying MEMS mirrors for endoscopic imaging. Equally excitingly, a new wave of opportunities for MEMS mirrors is coming up, for example, micro-LiDAR for autonomous driving and robotics, optical cross connect (OXC) for cloud data centers, and optical scanners for virtual reality/augumented reality, just to name a few. Of course, there are a number of big challenges that researchers and engineers must overcome to fully utiltize MEMS mirrors' potential: modeling and control are inherently complex due to the multiphysics, multi-DOF and nonlinear nature of the microactuators for MEMS mirrors; reliability is always a huge hurdle for commercilization; and the tradeoffs among the speed, aperture, and scan range are often overwhelming. Accordingly, this Special Issue seeks to showcase research papers, short communications, and review articles that focus on: (1) novel designs, fabrication, control, and modeling of MEMS mirrors based on all kinds of actuation mechanisms; and (2) new developments of applying MEMS mirrors of any kind in consumer electronics, optical communications, industry, medicine, agriculture, space, or defense.

Download or read book LiDAR Technologies and Systems written by Paul F. McManamon and published by SPIE-International Society for Optical Engineering. This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "LiDAR technology and Systems is a tutorial book, covering LiDAR Technology. The introduction sets lidar in context, as one of many sensor technologies utilizing electro-magnetic radiation. LiDAR is in the optical and infrared wavelengths, and it is an active sensor, which collects reflected EM radiation. It is similar to more familiar passive EO/IR sensors in wavelength, and similar to radar in that it uses reflected radiation emitted by the sensor. The second chapter goes the > 50 years of lidar history. Chapter 3 covers the link budget - how much signal a LiDAR must emit in order to get a certain number of reflected photons back. Chapter 4 discusses the rich phenomenology of LiDAR. One of the strengths of LiDAR is its' diverse phenomenology's. As a result, there are many flavors of LiDAR. The most common is 3D imaging, but there are many other types of lidars, with different measurement objectives. The next 4 chapters discuss components of a LiDAR. Chapter 5 discusses laser sources, chapter 6 LiDAR receivers, chapter 7 beam steering approaches, and chapter 8 LiDAR processing. The last 3 chapters are testing, metrics, and applications. Chapter 11, the applications chapter, picks 4 popular applications and discusses these LiDARs, and how to build them, for these applications. Chapter 11 as a result will repeats some information in earlier chapters, but in the context of a particular application"--

Download or read book Crime Scene Investigation written by National Institute of Justice (U.S.). Technical Working Group on Crime Scene Investigation and published by . This book was released on 2000 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a guide to recommended practices for crime scene investigation. The guide is presented in five major sections, with sub-sections as noted: (1) Arriving at the Scene: Initial Response/Prioritization of Efforts (receipt of information, safety procedures, emergency care, secure and control persons at the scene, boundaries, turn over control of the scene and brief investigator/s in charge, document actions and observations); (2) Preliminary Documentation and Evaluation of the Scene (scene assessment, "walk-through" and initial documentation); (3) Processing the Scene (team composition, contamination control, documentation and prioritize, collect, preserve, inventory, package, transport, and submit evidence); (4) Completing and Recording the Crime Scene Investigation (establish debriefing team, perform final survey, document the scene); and (5) Crime Scene Equipment (initial responding officers, investigator/evidence technician, evidence collection kits).

Download or read book Fundamentals of Signal Processing for Sound and Vibration Engineers written by Kihong Shin and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Signal Processing for Sound and Vibration Engineers is based on Joe Hammond’s many years of teaching experience at the Institute of Sound and Vibration Research, University of Southampton. Whilst the applications presented emphasise sound and vibration, the book focusses on the basic essentials of signal processing that ensures its appeal as a reference text to students and practitioners in all areas of mechanical, automotive, aerospace and civil engineering. Offers an excellent introduction to signal processing for students and professionals in the sound and vibration engineering field. Split into two parts, covering deterministic signals then random signals, and offering a clear explanation of their theory and application together with appropriate MATLAB examples. Provides an excellent study tool for those new to the field of signal processing. Integrates topics within continuous, discrete, deterministic and random signals to facilitate better understanding of the topic as a whole. Illustrated with MATLAB examples, some using ‘real’ measured data, as well as fifty MATLAB codes on an accompanying website.

Download or read book Mems Packaging written by Yung-cheng Lee and published by World Scientific. This book was released on 2018-01-03 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS sensors and actuators are enabling components for smartphones, AR/VR, and wearable electronics. MEMS packaging is recognized as one of the most critical activities to design and manufacture reliable MEMS. A unique challenge to MEMS packaging is how to protect moving MEMS devices during manufacturing and operation. With the introduction of wafer level capping and encapsulation processes, this barrier is removed successfully. In addition, MEMS devices should be integrated with their electronic chips with the smallest footprint possible. As a result, 3D packaging is applied to connect the devices vertically for the most effective integration. Such 3D packaging also paves the way for further heterogenous integration of MEMS devices, electronics, and other functional devices.This book consists of chapters written by leaders developing products in a MEMS industrial setting and faculty members conducting research in an academic setting. After an introduction chapter, the practical issues are covered: through-silicon vias (TSVs), vertical interconnects, wafer level packaging, motion sensor-to-CMOS bonding, and use of printed circuit board technology to fabricate MEMS. These chapters are written by leaders developing MEMS products. Then, fundamental issues are discussed, topics including encapsulation of MEMS, heterogenous integration, microfluidics, solder bonding, localized sealing, microsprings, and reliability.

Download or read book Laser Radar written by National Research Council and published by National Academies Press. This book was released on 2014-03-14 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's world, the range of technologies with the potential to threaten the security of U.S. military forces is extremely broad. These include developments in explosive materials, sensors, control systems, robotics, satellite systems, and computing power, to name just a few. Such technologies have not only enhanced the capabilities of U.S. military forces, but also offer enhanced offensive capabilities to potential adversaries - either directly through the development of more sophisticated weapons, or more indirectly through opportunities for interrupting the function of defensive U.S. military systems. Passive and active electro-optical (EO) sensing technologies are prime examples. Laser Radar considers the potential of active EO technologies to create surprise; i.e., systems that use a source of visible or infrared light to interrogate a target in combination with sensitive detectors and processors to analyze the returned light. The addition of an interrogating light source to the system adds rich new phenomenologies that enable new capabilities to be explored. This report evaluates the fundamental, physical limits to active EO sensor technologies with potential military utility; identifies key technologies that may help overcome the impediments within a 5-10 year timeframe; considers the pros and cons of implementing each existing or emerging technology; and evaluates the potential uses of active EO sensing technologies, including 3D mapping and multi-discriminate laser radar technologies.

Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. - Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field - Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms - Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy

Download or read book Fluorescence Microscopy written by Ulrich Kubitscheck and published by John Wiley & Sons. This book was released on 2017-03-27 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zu dem Thema gibt es viele Publikationen, die von Experten für Experten geschrieben wurden. Dieses Buch wendet sich insbesondere an Studenten höherer Semester und Forscher, denen das Hintergrundwissen der Physik fehlt, um neuartige Verfahren der Fluoreszenzmikroskopie zu verstehen. Die zweite Auflage wartet mit neuen Kapiteln und einer erweiterten Einführung auf. Der Schwerpunkt liegt auf der hochauflösenden und Einzelmolekül-Mikroskopie. Jedes Kapitel wurde von einem anerkannten Experten des Fachgebiets geschrieben und sorgfältig überarbeitet, um so die Entwicklungen der letzten Jahre wiederzugeben.

Download or read book Importing Into the United States written by U. S. Customs and Border Protection and published by . This book was released on 2015-10-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains process of importing goods into the U.S., including informed compliance, invoices, duty assessments, classification and value, marking requirements, etc.

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book Field Guide to Lidar written by Paul F. McManamon and published by . This book was released on 2015 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Field Guide covers the various components and types of active electro-optical sensors - referred to as lidars in the text - from simple 2D direct-detection lidars to multiple subaperture synthetic aperture lidars. Other topics covered include receivers, apertures, atmospheric effects, and appropriate processing of different lidars. Lasers and modulation are presented in terms of their use in lidars. The lidar range equation in its many variations is discussed along with receiver noise issues that determine how much signal must be received to detect an object. This book is a handy reference to quickly look up any aspect of active electro-optical sensors. It will be useful to students, lidar scientists, or engineers needing an occasional reminder of the correct approaches or equations in certain applications, and systems engineers interested in gaining a perspective on this rapidly growing technology.

Download or read book 2021 Telecoms Conference ConfTELE written by IEEE Staff and published by . This book was released on 2021-02-11 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference on Telecommunications

Download or read book MEMS Materials and Processes Handbook written by Reza Ghodssi and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 1211 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMs Materials and Processes Handbook" is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on "Materials" and "Processes". The extensive Material Selection Guide" and a "Material Database" guides the reader through the selection of appropriate materials for the required task at hand. The "Processes" section of the book is organized as a catalog of various microfabrication processes, each with a brief introduction to the technology, as well as examples of common uses in MEMs.

Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.

Download or read book Understanding Smart Sensors written by Randy Frank and published by Artech House Publishers. This book was released on 1996 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Two of the most important trends in sensor development in recent years have been advances in micromachined sensing elements of all kinds, and the increase in intelligence applied at the sensor level. This book addresses both, and provides a good overview of current technology". -- I&CS

Download or read book Sophie s World written by Jostein Gaarder and published by Farrar, Straus and Giroux. This book was released on 2007-03-20 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: A page-turning novel that is also an exploration of the great philosophical concepts of Western thought, Jostein Gaarder's Sophie's World has fired the imagination of readers all over the world, with more than twenty million copies in print. One day fourteen-year-old Sophie Amundsen comes home from school to find in her mailbox two notes, with one question on each: "Who are you?" and "Where does the world come from?" From that irresistible beginning, Sophie becomes obsessed with questions that take her far beyond what she knows of her Norwegian village. Through those letters, she enrolls in a kind of correspondence course, covering Socrates to Sartre, with a mysterious philosopher, while receiving letters addressed to another girl. Who is Hilde? And why does her mail keep turning up? To unravel this riddle, Sophie must use the philosophy she is learning—but the truth turns out to be far more complicated than she could have imagined.

Download or read book Factor Graphs for Robot Perception written by Frank Dellaert and published by . This book was released on 2017-08-15 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the use of factor graphs for the modeling and solving of large-scale inference problems in robotics. Factor graphs are introduced as an economical representation within which to formulate the different inference problems, setting the stage for the subsequent sections on practical methods to solve them.