Download or read book Semiconductor Memories and Systems written by Andrea Redaelli and published by Woodhead Publishing. This book was released on 2022-06-07 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Memories and Systems provides a comprehensive overview of the current state of semiconductor memory at the technology and system levels. After an introduction on market trends and memory applications, the book focuses on mainstream technologies, illustrating their current status, challenges and opportunities, with special attention paid to scalability paths. Technologies discussed include static random access memory (SRAM), dynamic random access memory (DRAM), non-volatile memory (NVM), and NAND flash memory. Embedded memory and requirements and system level needs for storage class memory are also addressed. Each chapter covers physical operating mechanisms, fabrication technologies, and the main challenges to scalability.Finally, the work reviews the emerging trends for storage class memory, mainly focusing on the advantages and opportunities of phase change based memory technologies. - Features contributions from experts from leading companies in semiconductor memory - Discusses physical operating mechanisms, fabrication technologies and paths to scalability for current and emerging semiconductor memories - Reviews primary memory technologies, including SRAM, DRAM, NVM and NAND flash memory - Includes emerging storage class memory technologies such as phase change memory

Download or read book Analog Baseband Architectures and Circuits for Multistandard and Low Voltage Wireless Transceivers written by Pui-In Mak and published by Springer Science & Business Media. This book was released on 2007-09-07 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents architectural and circuit techniques for wireless transceivers to achieve multistandard and low-voltage compliance. It provides an up-to-date survey and detailed study of the state-of-the-art transceivers for modern single- and multi-purpose wireless communication systems. The book includes comprehensive analysis and design of multimode reconfigurable receivers and transmitters for an efficient multistandard compliance.

Download or read book Mixed Analog digital Vlsi Devices And Technology written by Yannis Tsividis and published by World Scientific. This book was released on 2002-08-19 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve your circuit-design potential with this expert guide to the devices and technology used in mixed analog-digital VLSI chips for such high-volume applications as hard-disk drives, wireless telephones, and consumer electronics. The book provides you with a critical understanding of device models, fabrication technology, and layout as they apply to mixed analog-digital circuits.You will learn about the many device-modeling requirements for analog work, as well as the pitfalls in models used today for computer simulators such as Spice. Also included is information on fabrication technologies developed specifically for mixed-signal VLSI chips, plus guidance on the layout of mixed analog-digital chips for a high degree of analog-device matching and minimum digital-to-analog interference.This reference book features an intuitive introduction to MOSFET operation that will enable you to view with insight any MOSFET model — besides thorough discussions on valuable large-signal and small-signal models.Filled with practical information, this first-of-its-kind book will help you grasp the nuances of mixed-signal VLSI-device models and layout that are crucial to the design of high-performance chips.

Download or read book Ferroelectric Gate Field Effect Transistor Memories written by Byung-Eun Park and published by Springer. This book was released on 2016-09-02 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the materials characteristics, process technologies, and device operations for memory field-effect transistors employing inorganic or organic ferroelectric thin films. This transistor-type ferroelectric memory has interesting fundamental device physics and potentially large industrial impact. Among the various applications of ferroelectric thin films, the development of nonvolatile ferroelectric random access memory (FeRAM) has progressed most actively since the late 1980s and has achieved modest mass production levels for specific applications since 1995. There are two types of memory cells in ferroelectric nonvolatile memories. One is the capacitor-type FeRAM and the other is the field-effect transistor (FET)-type FeRAM. Although the FET-type FeRAM claims ultimate scalability and nondestructive readout characteristics, the capacitor-type FeRAMs have been the main interest for the major semiconductor memory companies, because the ferroelectric FET has fatal handicaps of cross-talk for random accessibility and short retention time. This book aims to provide readers with the development history, technical issues, fabrication methodologies, and promising applications of FET-type ferroelectric memory devices, presenting a comprehensive review of past, present, and future technologies. The topics discussed will lead to further advances in large-area electronics implemented on glass or plastic substrates as well as in conventional Si electronics. The book is composed of chapters written by leading researchers in ferroelectric materials and related device technologies, including oxide and organic ferroelectric thin films.

Download or read book CMOS Analog Design Using All Region MOSFET Modeling written by Márcio Cherem Schneider and published by Cambridge University Press. This book was released on 2010-01-28 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essentials of analog circuit design with a unique all-region MOSFET modeling approach.

Download or read book Advanced Circuits for Emerging Technologies written by Krzysztof Iniewski and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book will address the-state-of-the-art in integrated circuit design in the context of emerging systems. New exciting opportunities in body area networks, wireless communications, data networking, and optical imaging are discussed. Emerging materials that can take system performance beyond standard CMOS, like Silicon on Insulator (SOI), Silicon Germanium (SiGe), and Indium Phosphide (InP) are explored. Three-dimensional (3-D) CMOS integration and co-integration with sensor technology are described as well. The book is a must for anyone serious about circuit design for future technologies. The book is written by top notch international experts in industry and academia. The intended audience is practicing engineers with integrated circuit background. The book will be also used as a recommended reading and supplementary material in graduate course curriculum. Intended audience is professionals working in the integrated circuit design field. Their job titles might be : design engineer, product manager, marketing manager, design team leader, etc. The book will be also used by graduate students. Many of the chapter authors are University Professors.

Download or read book CMOS Memory Circuits written by Tegze P. Haraszti and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Memory Circuits is a systematic and comprehensive reference work designed to aid in the understanding of CMOS memory circuits, architectures, and design techniques. CMOS technology is the dominant fabrication method and almost the exclusive choice for semiconductor memory designers. Both the quantity and the variety of complementary-metal-oxide-semiconductor (CMOS) memories are staggering. CMOS memories are traded as mass-products worldwide and are diversified to satisfy nearly all practical requirements in operational speed, power, size, and environmental tolerance. Without the outstanding speed, power, and packing density characteristics of CMOS memories, neither personal computing, nor space exploration, nor superior defense systems, nor many other feats of human ingenuity could be accomplished. Electronic systems need continuous improvements in speed performance, power consumption, packing density, size, weight, and costs. These needs continue to spur the rapid advancement of CMOS memory processing and circuit technologies. CMOS Memory Circuits is essential for those who intend to (1) understand, (2) apply, (3) design and (4) develop CMOS memories.

Download or read book Analog and Mixed Signal Circuits in Nanoscale CMOS written by Rui Paulo da Silva Martins and published by Springer Nature. This book was released on 2023-01-05 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a single-source reference to the state-of-the-art in analog and mixed-signal circuit design in nanoscale CMOS. Renowned authors from academia describe creative circuit solutions and techniques, in state-of-the-art designs, enabling readers to deal with today’s technology demands for high integration levels with a strong miniaturization capability.

Download or read book MULS a Union List of Serials written by and published by . This book was released on 1981 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Yield Simulation for Integrated Circuits written by D.M. Walker and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the summer of 1981 I was asked to consider the possibility of manufacturing a 600,000 transistor microprocessor in 1985. It was clear that the technology would only be capable of manufacturing 100,000-200,000 transistor chips with acceptable yields. The control store ROM occupied approximately half of the chip area, so I considered adding spare rows and columns to increase ROM yield. Laser-programmed polysilicon fuses would be used to switch between good and bad circuits. Since only half the chip area would have redundancy, I was concerned that the increase in yield would not outweigh the increased costs of testing and redundancy programming. The fabrication technology did not yet exist, so I was unable to experimentally verify the benefits of redundancy. When the technology did become available, it would be too late in the development schedule to spend time running test chips. The yield analysis had to be done analytically or by simulation. Analytic yield analysis techniques did not offer sufficient accuracy for dealing with complex structures. The simulation techniques then available were very labor-intensive and seemed more suitable for redundant memories and other very regular structures [Stapper 80J. I wanted a simulator that would allow me to evaluate the yield of arbitrary redundant layouts, hence I termed such a simulator a layout or yield simulator. Since I was unable to convince anyone to build such a simulator for me, I embarked on the research myself.

Download or read book The Computer Engineering Handbook written by Vojin G. Oklobdzija and published by CRC Press. This book was released on 2019-07-05 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: After nearly six years as the field's leading reference, the second edition of this award-winning handbook reemerges with completely updated content and a brand new format. The Computer Engineering Handbook, Second Edition is now offered as a set of two carefully focused books that together encompass all aspects of the field. In addition to complete updates throughout the book to reflect the latest issues in low-power design, embedded processors, and new standards, this edition includes a new section on computer memory and storage as well as several new chapters on such topics as semiconductor memory circuits, stream and wireless processors, and nonvolatile memory technologies and applications.

Download or read book Digital Systems and Applications written by Vojin G. Oklobdzija and published by CRC Press. This book was released on 2017-12-19 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: New design architectures in computer systems have surpassed industry expectations. Limits, which were once thought of as fundamental, have now been broken. Digital Systems and Applications details these innovations in systems design as well as cutting-edge applications that are emerging to take advantage of the fields increasingly sophisticated capabilities. This book features new chapters on parallelizing iterative heuristics, stream and wireless processors, and lightweight embedded systems. This fundamental text— Provides a clear focus on computer systems, architecture, and applications Takes a top-level view of system organization before moving on to architectural and organizational concepts such as superscalar and vector processor, VLIW architecture, as well as new trends in multithreading and multiprocessing. includes an entire section dedicated to embedded systems and their applications Discusses topics such as digital signal processing applications, circuit implementation aspects, parallel I/O algorithms, and operating systems Concludes with a look at new and future directions in computing Features articles that describe diverse aspects of computer usage and potentials for use Details implementation and performance-enhancing techniques such as branch prediction, register renaming, and virtual memory Includes a section on new directions in computing and their penetration into many new fields and aspects of our daily lives

Download or read book Hybrid ADCs Smart Sensors for the IoT and Sub 1V Advanced Node Analog Circuit Design written by Pieter Harpe and published by Springer. This book was released on 2017-09-18 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 26th workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, with specific contributions focusing on hybrid ADCs, smart sensors for the IoT, sub-1V and advanced-node analog circuit design. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book Makers of the Microchip written by Christophe Lecuyer and published by MIT Press. This book was released on 2022-10-25 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first years of the company that developed the microchip and created the model for a successful Silicon Valley start-up. In the first three and a half years of its existence, Fairchild Semiconductor developed, produced, and marketed the device that would become the fundamental building block of the digital world: the microchip. Founded in 1957 by eight former employees of the Schockley Semiconductor Laboratory, Fairchild created the model for a successful Silicon Valley start-up: intense activity with a common goal, close collaboration, and a quick path to the market (Fairchild's first device hit the market just ten months after the company's founding). Fairchild Semiconductor was one of the first companies financed by venture capital, and its success inspired the establishment of venture capital firms in the San Francisco Bay area. These firms would finance the explosive growth of Silicon Valley over the next several decades. This history of the early years of Fairchild Semiconductor examines the technological, business, and social dynamics behind its innovative products. The centerpiece of the book is a collection of documents, reproduced in facsimile, including the company's first prospectus; ideas, sketches, and plans for the company's products; and a notebook kept by cofounder Jay Last that records problems, schedules, and tasks discussed at weekly meetings. A historical overview, interpretive essays, and an introduction to semiconductor technology in the period accompany these primary documents.

Download or read book RF Microwave Circuit Design for Wireless Applications written by Ulrich L. Rohde and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique, state-of-the-art guide to wireless integrated circuit design. With wireless technology rapidly exploding, there is a growing need for circuit design information specific to wireless applications. Presenting a single-source guidebook to this dynamic area, industry expert Ulrich Rohde and writer David Newkirk provide researchers and engineers with a complete set of modeling, design, and implementation tools for tackling even the newest IC technologies. They emphasize practical design solutions for high-performance devices and circuitry, incorporating ample examples of novel and clever circuits from high-profile companies. They also provide excellent appendices containing working models and CAD-based applications. RF/Microwave Circuit Design for Wireless Applications offers: * Introduction to wireless systems and modulation types * A systematic approach that differentiates between designing for battery-operated devices and base-station design * A comprehensive introduction to semiconductor technologies, from bipolar transistors to CMOS to GaAs MESFETs * Clear guidelines for obtaining the best performance in discrete and integrated amplifier design * Detailed analysis of available mixer circuits applicable to the wireless frequency range * In-depth explanations of oscillator circuits, including microwave oscillators and ceramic-resonator-based oscillators * A thorough evaluation of all components of wireless synthesizers

Download or read book System Integration written by Kurt Hoffmann and published by John Wiley & Sons. This book was released on 2006-02-08 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of large-scale integrated systems on a chip has had a dramatic effect on circuit design methodology. Recent years have seen an escalation of interest in systems level integration (system-on-a-chip) and the development of low power, high chip density circuits and systems. Kurt Hoffmann sets out to address a wide range of issues relating to the design and integration of integrated circuit components and provides readers with the methodology by which simple equations for the estimation of transistor geometries and circuit behaviour can be deduced. The broad coverage of this unique book ranges from field effect transistor design, MOS transistor modelling and the fundamentals of digital CMOS circuit design through to MOS memory architecture and design. Highlights the increasing requirement for information on system-on-a-chip design and integration. Combines coverage of semiconductor physics, digital VLSI design and analog integrated circuits in one volume for the first time. Written with the aim of bridging the gap between semiconductor device physics and practical circuit design. Introduces the basic behaviour of semiconductor components for ICs and covers the design of both digital and analog circuits in CMOS and BiCMOS technologies. Broad coverage will appeal to both students and practising engineers alike. Written by a respected expert in the field with a proven track record of publications in this field. Drawing upon considerable experience within both industry and academia, Hoffmann’s outstanding text, will prove an invaluable resource for designers, practising engineers in the semiconductor device field and electronics systems industry as well as Postgraduate students of microelectronics, electrical and computer engineering.

Download or read book Irregular Serials Annuals written by and published by . This book was released on 1986 with total page 1960 pages. Available in PDF, EPUB and Kindle. Book excerpt: