Download or read book Solid Lubrication Fundamentals and Applications Chapter 1 Introduction and Background written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-11 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter presents an introduction and historical background to the field of tribology, especially solid lubrication and lubricants and sets them in the perspective of techniques and materials in lubrication. Also, solid and liquid lubrication films are defined and described. Miyoshi, Kazuhisa Glenn Research Center RTOP 505-63-5A...
Download or read book Solid Lubrication Fundamentals and Applications written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-11 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter presents an introduction and historical background to the field of tribology, especially solid lubrication and lubricants and sets them in the perspective of techniques and materials in lubrication. Also, solid and liquid lubrication films are defined and described. Miyoshi, Kazuhisa Glenn Research Center RTOP 505-63-5A...
Download or read book Solid Lubrication Fundamentals and Applications written by Kazuhisa Miyoshi and published by CRC Press. This book was released on 2019-06-05 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Lubrication Fundamentals and Applications description of the adhesion, friction, abrasion, and wear behavior of solid film lubricants and related tribological materials, including diamond and diamond-like solid films. The book details the properties of solid surfaces, clean surfaces, and contaminated surfaces as well as discussing the structu
Download or read book Solid Lubrication Fundamentals and Applications Introduction and Background written by and published by . This book was released on 1998 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Lubrication Fundamentals and Applications written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-21 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter focuses attention on the friction and wear properties of selected solid lubricating films to aid users in choosing the best lubricant, deposition conditions, and operational variables. For simplicity, discussion of the tribological properties of concern is separated into two parts. The first part of the chapter discusses the different solid lubricating films selected for study including commercially developed solid film lubricants: (1) bonded molybdenum disulfide (MoS2), (2) magnetron-sputtered MoS2, (3) ion-plated silver, (4) ion-plated lead, (5) magnetron-sputtered diamondlike carbon (MS DLC), and (6) plasma-assisted, chemical-vapor-deposited diamondlike carbon (PACVD DEC) films. Marked differences in the friction and wear properties of the different films resulted from the different environmental conditions (ultrahigh vacuum, humid air, and dry nitrogen) and the solid film lubricant materials. The second part of the chapter discusses the physical and chemical characteristics, friction behavior, and endurance life of the magnetron-sputtered MoS2 films. The role of interface species and the effects of applied load, film thickness, oxygen pressure, environment, and temperature on the friction and wear properties are considered.Miyoshi, KazuhisaGlenn Research CenterTRIBOLOGY; WEAR; SOLID LUBRICANTS; COATINGS; FILM THICKNESS; VACUUM; FRICTION
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2000 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Lubrication Fundamentals and Applications written by and published by . This book was released on 2001 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Lubrication Fundamentals and Applications written by Kazuhisa Miyoshi and published by CRC Press. This book was released on 2019-06-05 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Lubrication Fundamentals and Applications description of the adhesion, friction, abrasion, and wear behavior of solid film lubricants and related tribological materials, including diamond and diamond-like solid films. The book details the properties of solid surfaces, clean surfaces, and contaminated surfaces as well as discussing the structu
Download or read book Tribology written by Jürgen Gegner and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the subject of tribology comprises lubrication, friction and wear of contact components highly relevant to practical applications, it challenges scientists from chemistry, physics and materials engineering around the world on todays sophisticated experimental and theoretical foundation to complex interdisciplinary research. Recent results and developments are preferably presented and evaluated in the context of established knowledge. Consisting of eleven chapters divided into the four parts of Lubrication and Properties of Lubricants, Boundary Lubrication Applications, Testing and Modeling, and Sustainability of Tribosystems, this textbook therefore merges basic concepts with new findings and approaches. Tribology Fundamentals and Advancements, supported by competent authors, aims to convey current research trends in the light of the state of the art to students, scientists and practitioners and help them solve their problems.
Download or read book Tribology of Machine Elements written by Giuseppe Pintaude and published by BoD – Books on Demand. This book was released on 2022-06-28 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is a branch of science that deals with machine elements and their friction, wear, and lubrication. Tribology of Machine Elements - Fundamentals and Applications presents the fundamentals of tribology, with chapters on its applications in engines, metal forming, seals, blasting, sintering, laser texture, biomaterials, and grinding.
Download or read book Lubricants written by Marika Torbacke and published by John Wiley & Sons. This book was released on 2014-03-10 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Those working with tribology often have a background in mechanical engineering, while people working with lubricant development have a chemistry/chemical engineering background. This means they have a tradition of approaching problems in different ways. Today’s product development puts higher demands on timing and quality, requiring collaboration between people with different backgrounds. However, they can lack understanding of each other’s challenges as well as a common language, and so this book aims to bridge the gap between these two areas. Lubricants: Introduction to Properties and Performance provides an easy to understand overview of tribology and lubricant chemistry. The first part of the book is theoretical and provides an introduction to tribological contact, friction, wear and lubrication, as well as the basic concepts regarding properties and the most commonly made analyses on lubricants. Base fluids and their properties and common additives used in lubricants are also covered. The second part of the book is hands-on and introduces the reader to the actual formulations and the evaluation of their performance. Different applications and their corresponding lubricant formulations are considered and tribological test methods are discussed. Finally used oil characterisation and surface characterisation are covered which give the reader an introduction to different methods of characterising used oils and surfaces, respectively. Key features: Combines chemistry and tribology of lubricants into one unified approach Covers the fundamental theory, describing lubricant properties as well as base fluids and additives Contains practical information on the formulations of lubricants and evaluates their performance Considers applications of lubricants in hydraulics, gears and combustion engines Lubricants: Introduction to Properties and Performance is a comprehensive reference for industry practitioners (tribologists, lubricant technicians, and lubricant chemists, etc) and is also an excellent source of information for graduate and undergraduate students.
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book Solid Lubricants and Self Lubricating Solids written by Francis J. Clauss and published by Elsevier. This book was released on 2012-12-02 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Lubricants and Self-Lubricating Solids provides a concise treatment of solid lubricants and self-lubricating solids and their applications. These solid lubricants include graphite, molybdenum disulfide, plastics and thermoplastics, nylon, soft metals, fluorocarbons, and phenolics. Low-friction inorganic solids as well as miscellaneous inorganic compounds such as dichalcogenides and fluorides are also discussed. This book is comprised of 11 chapters and begins with an overview of some basic facts about friction and lubrication. The reader is then introduced to inorganic solid lubricants, their their crystal structure, advantages and disadvantages, and the forms in which they are most commonly used. The following chapters focus on the lubricating qualities of graphite, molybdenum disulfide, plastics and thermoplastics, nylon, soft metals, and fluorocarbons. Miscellaneous inorganic compounds with special applications involving friction and wear are also considered. The final chapter is devoted to phenolic laminates, their properties, and their mechanical applications such as gears and bearings. This monograph will be a useful resource for designers and operating engineers.
Download or read book Diamond and Related Materials Research written by Shôta Shimizu and published by . This book was released on 2008 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research from around the world on diamond materials as well as related materials. These include cubic boron nitride and materials with characteristics and properties approaching or possibly exceeding those of diamond.
Download or read book Hydrostatic Extrusion written by N. Inoue and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to be a reference text on hydrostatic extru sion, a multidisciplinary technology involving the forming process of materials, tribology, high pressure engineering and so forth. Until now only one book bearing the title of hydrostatic extrusion, by Prof. Alexander and Dr. Lengyel, has been published since 1971. Although there are chapters on hydrostatic extrusion in such books as THE MECHANICAL BEHAVIOUR OF MATERIALS UNDER PRESSURE edited by Dr. Pugh, METAL FORMING by Prof. Avitzur and HIGH PRESSURE TECHNOLOGY by Drs. Spain and Paauwe, it is regrettable that no up~to-date reference books on hydro static extrusion are available. As is well known, hydrostatic extrusion is a nearly-ideal lubricated extrusion. Its advantages have been demonstrated by laboratory research in the past two decades, yet many manufacturers, however, still hesitate to adopt the technology in their plants. Their hesitation is certainly due to the lack of exact information on the process and its equipment and also to 'their unfamiliarity with the actual method of operation. In order to provide a useful introduction to the subject for engi neers who work in industries which plan to employ this technique and also to give exact and reliable information on the durability and perfo- ance of production facilities, as well as the capabilities of the process and the properties of extruded products, we decided to publish this book. Starting with theories and computational methods, the processes of cold, warm and hot hydrostatic extrusion are described by experts in their respective fields.
Download or read book Solid Lubrication Fundamentals and Applications Chapter 5 Abrasion Plowing and Cutting written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-21 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 5 discusses abrasion, a common wear phenomenon of great economic importance. It has been estimated that 50% of the wear encountered in industry is due to abrasion. Also, it is the mechanism involved in the finishing of many surfaces. Experiments are described to help in understanding the complex abrasion process and in predicting friction and wear behavior in plowing and/or cutting. These experimental modelings and measurements used a single spherical pin (asperity) and a single wedge pin (asperity). Other two-body and three-body abrasion studies used hard abrasive particles.Miyoshi, KazuhisaGlenn Research CenterABRASION; CUTTING; WEAR; SURFACE PROPERTIES; METAL SURFACES; FRICTION; HARDNESS; PARTICLES; GRIT
Download or read book Lubrication Fundamentals Revised and Expanded written by Don M. Pirro and published by CRC Press. This book was released on 2017-07-31 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Careful selection of the right lubricant(s) is required to keep a machine running smoothly. Lubrication Fundamentals, Third Edition, Revised and Expanded describes the need and design for the many specialized oils and greases used to lubricate machine elements and builds on the tribology and lubrication basics discussed in previous editions. Utilizing knowledge from leading experts in the field, the third edition covers new lubrication requirements, crude oil composition and selection, base stock manufacture, lubricant formulation and evaluation, machinery and lubrication fundamentals, and environmental stewardship. The book combines lubrication theory with practical knowledge, and provides many useful illustrations to highlight key industrial, commercial, marine, aviation, and automotive lubricant applications and concepts. All previous edition chapters have been updated to include new technologies, applications, and specifications that have been introduced in the past 15 years. What’s New in the Third Edition: Adds three new chapters on the growing renewable energy application of wind turbines, the impact of lubricants on energy efficiency, and best practice guidelines on establishing an in-service lubricant analysis program Updates API, SAE, and ACEA engine oil specifications, descriptions of new engine oil tests, impact of engine and fuel technology trends on engine oil Includes the latest environmental lubricant tests, definitions, and labelling programs Compiles expert information from ExxonMobil publications and the foremost international equipment builders and industry associations Covers key influences impacting lubricant formulations and technology Offers data on global energy demand and interesting statistics such as the worldwide population of nuclear reactors, wind turbines, and output of hydraulic turbines Presents new sections on the history of synthetic lubricants and hazardous chemical labeling for lubricants Whether used as a training guide for industry novices, a textbook for students to understand lubrication principles, or a technical reference for experienced lubrication and tribology professionals, Lubrication Fundamentals, Third Edition, Revised and Expanded is a "must read" for maintenance professionals, lubricant formulators and marketers, chemists, and lubrication, surface, chemical, mechanical, and automotive engineers.
