Download or read book Solid Freeform and Additive Fabrication written by and published by . This book was released on 1999 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solid Freeform Fabrication A New Direction in Manufacturing written by J.J. Beaman and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Freeform Fabrication is a set of manufacturing processes that are capable of producing complex freeform solid objects directly from a computer model of an object without part-specific tooling or knowledge. In essence, these methods are miniature manufacturing plants which come complete with material handling, information processing and materials processing. As such, these methods require technical knowledge from many disciplines; therefore, researchers, engineers, and students in Mechanical, Chemical, Electrical, and Manufacturing Engineering and Materials and Computer Science will all find some interest in this subject. Particular subareas of concern include manufacturing methods, polymer chemistry, computational geometry, control, heat transfer, metallurgy, ceramics, optics, and fluid mechanics. History of technology specialists may also find Chapter 1 of interest. Although this book covers the spectrum of different processes, the emphasis is clearly on the area in which the authors have the most experience, thermal laser processing. In particular, the authors have all been developers and inventors of techniques for the Selective Laser Sintering process and laser gas phase techniques (Selective Area Laser Deposition). This is a research book on the subject of Solid Freeform Fabrication.

Download or read book Solid Freeform and Additive Fabrication written by Duane Dimos and published by Cambridge University Press. This book was released on 2014-06-05 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid freeform (SFF) and additive fabrication processes are defining a revolutionary approach for materials manufacturing, leading to a capability for producing parts quicker, cheaper and with more functionality than previously thought possible. The key aspect of these direct fabrication techniques is the ability to deposit or build up material only where it is required to produce finished or nearly finished parts. While tremendous engineering progress has been made in this field, materials issues associated with layer-wise additive processes are just beginning to be addressed in a comprehensive manner. This book brings together experts in the SFF field to discuss recent developments in the processing of ceramics, metals, polymers, and composites, with a focus on the processing-structure-property relationships associated with these freeform and additive fabrication techniques. Topics include: organics, composites and laser CVD; direct metal fabrication; ceramic freeform fabrication; and ceramic freeform and layered direct fabrication.

Download or read book Additive Manufacturing Applications for Metals and Composites written by Balasubramanian, K.R. and published by IGI Global. This book was released on 2020-06-19 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) of metals and composites using laser energy, direct energy deposition, electron beam methods, and wire arc melting have recently gained importance due to their advantages in fabricating the complex structure. Today, it has become possible to reliably manufacture dense parts with certain AM processes for many materials, including steels, aluminum and titanium alloys, superalloys, metal-based composites, and ceramic matrix composites. In the near future, the AM material variety will most likely grow further, with high-performance materials such as intermetallic compounds and high entropy alloys already under investigation. Additive Manufacturing Applications for Metals and Composites is a pivotal reference source that provides vital research on advancing methods and technological developments within additive manufacturing practices. Special attention is paid to the material design of additive manufacturing of parts, the choice of feedstock materials, the metallurgical behavior and synthesis principle during the manufacturing process, and the resulted microstructures and properties, as well as the relationship between these factors. While highlighting topics such as numerical modeling, intermetallic compounds, and statistical techniques, this publication is ideally designed for students, engineers, researchers, manufacturers, technologists, academicians, practitioners, scholars, and educators.

Download or read book Handbook of Materials Structures Properties Processing and Performance written by Lawrence E. Murr and published by Springer. This book was released on 2021-01-14 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensive knowledge base provides a coherent description of advanced topics in materials science and engineering with an interdisciplinary/multidisciplinary approach. The book incorporates a historical account of critical developments and the evolution of materials fundamentals, providing an important perspective for materials innovations, including advances in processing, selection, characterization, and service life prediction. It includes the perspectives of materials chemistry, materials physics, engineering design, and biological materials as these relate to crystals, crystal defects, and natural and biological materials hierarchies, from the atomic and molecular to the macroscopic, and emphasizing natural and man-made composites. This expansive presentation of topics explores interrelationships among properties, processing, and synthesis (historic and contemporary). The book serves as both an authoritative reference and roadmap of advanced materials concepts for practitioners, graduate-level students, and faculty coming from a range of disciplines.

Download or read book Rapid Prototyping of Biomaterials written by Roger Narayan and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Prototyping of Biomaterials: Principles and Applications provides a comprehensive review of established and emerging rapid prototyping technologies (such as bioprinting) for medical applications. Rapid prototyping, also known as layer manufacturing, additive manufacturing, solid freeform fabrication, or 3D printing, can be used to create complex structures and devices for medical applications from solid, powder, or liquid precursors. Following a useful introduction, which provides an overview of the field, the book explores rapid prototyping of nanoscale biomaterials, biosensors, artificial organs, and prosthetic limbs. Further chapters consider the use of rapid prototyping technologies for the processing of viable cells, scaffolds, and tissues. With its distinguished editor and international team of renowned contributors, Rapid Prototyping of Biomaterials is a useful technical resource for scientists and researchers in the biomaterials and tissue regeneration industry, as well as in academia. - Comprehensive review of established and emerging rapid prototyping technologies (such as bioprinting) for medical applications - Chapters explore rapid prototyping of nanoscale biomaterials, biosensors, artificial organs, and prosthetic limbs - Examines the use of rapid prototyping technologies for the processing of viable cells, scaffolds, and tissues

Download or read book Rapid Manufacturing written by Neil Hopkinson and published by John Wiley & Sons. This book was released on 2006-02-22 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Manufacturing is a new area of manufacturing developed from a family of technologies known as Rapid Prototyping. These processes have already had the effect of both improving products and reducing their development time; this in turn resulted in the development of the technology of Rapid Tooling, which implemented Rapid Prototyping techniques to improve its own processes. Rapid Manufacturing has developed as the next stage, in which the need for tooling is eliminated. It has been shown that it is economically feasible to use existing commercial Rapid Prototyping systems to manufacture series parts in quantities of up to 20,000 and customised parts in quantities of hundreds of thousands. This form of manufacturing can be incredibly cost-effective and the process is far more flexible than conventional manufacturing. Rapid Manufacturing: An Industrial Revolution for the Digital Age addresses the academic fundamentals of Rapid Manufacturing as well as focussing on case studies and applications across a wide range of industry sectors. As a technology that allows manufacturers to create products without tools, it enables previously impossible geometries to be made. This book is abundant with images depicting the fantastic array of products that are now being commercially manufactured using these technologies. Includes contributions from leading researchers working at the forefront of industry. Features detailed illustrations throughout. Rapid Manufacturing: An Industrial Revolution for the Digital Age is a groundbreaking text that provides excellent coverage of this fast emerging industry. It will interest manufacturing industry practitioners in research and development, product design and materials science, as well as having a theoretical appeal to researchers and post-graduate students in manufacturing engineering, product design, CAD/CAM and CIFM.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Design for Additive Manufacturing written by Dhruv Bhate and published by . This book was released on 2019 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of ten seminal SAE International technical papers, which cover AM from the perspective of the appropriateness (should) and feasibility (can) of using AM for manufacturing of parts and tooling.

Download or read book Additive Manufacturing Handbook written by Adedeji B. Badiru and published by CRC Press. This book was released on 2017-05-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing has undergone a major advancement and technology shift in recent years.

Download or read book Solid Freeform and Additive Fabrication 2000 Volume 625 written by Stephen C. Danforth and published by Mrs Proceedings. This book was released on 2000-10-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.

Download or read book Additive Manufacturing and Strategic Technologies in Advanced Ceramics written by Kiyoshi Shimamura and published by John Wiley & Sons. This book was released on 2016-08-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada: Additive Manufacturing Technologies Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications Multifunctional Coatings for Energy and Environmental Applications Novel, Green, and Strategic Processing and Manufacturing Technologies Powder Processing Technology for Advanced Ceramics Computational Design and Modeling Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)

Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.

Download or read book Handbook of Sustainability in Additive Manufacturing written by Subramanian Senthilkannan Muthu and published by Springer. This book was released on 2016-03-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the sustainability aspects of additive manufacturing (AM) in two separate volumes. It describes the details of this technology and its implications on the entire product life cycle sustainability, as well as embedded carbon and the further research needed to move this technology towards sustainable, mainstream production. Sustainability is not new for any area of industry, including additive manufacturing, and there are currently a number of ongoing research projects, both in industry and in academic institutions, that are investigating sustainability, embedded carbon and research activities which would need to be done in the future to move this technology towards sustainable mainstream production.

Download or read book Advanced Additive Manufacturing written by Igor V. Shishkovsky and published by BoD – Books on Demand. This book was released on 2022-07-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is now being used to produce series components for the most demanding applications. It is a disruptive, if not revolutionary, manufacturing technology. The biggest advantage of this technology is its capacity to make parts with any free form, thus paving the way for free and complex part design. Components and integrated structures with complex designs that would not have been possible just a few years ago can now be made according to various requirements. The net-shape manufacturing capacity of AM allows a considerable saving of materials, conventional thermomechanical processing, and machining processes, making it an environmentally friendly manufacturing technology. This book includes two sections that cover new approaches in AM for biomedical applications and advanced technological solutions.

Download or read book Handbook of Laser Based Sustainable Surface Modification and Manufacturing Techniques written by Hitesh Vasudev and published by CRC Press. This book was released on 2023-07-05 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an insight into the advancements in surface engineering methods, addressing the microstructural features, properties, mechanisms of surface degradation failures, and tribological performance of the components. Emphasis is placed on the use of laser cladding methods because they make it simple to deposit new classes of materials such nano-composites, nanotubes, and smart materials. Handbook of Laser-Based Sustainable Surface Modification and Manufacturing Techniques discusses the main mechanism behind the surface degradation of structural components in strenuous environments. It highlights the capacity of laser cladding to operate on a wide range of substrate materials and shapes as well as presents how laser cladding can offer new possibilities in the reconditioning of components and how, in many cases, these approaches are the only solution for economic efficiency. The handbook illustrates how the type of laser, laser optics, and the parameters of the process can be efficiently selected, and thus the number of applications of laser cladding and its applications can be increased. The standard methods of testing used for various types of biomedical devices and tools, as well as the advantages of combining laser cladding with simultaneous induction heating, are described as well within this handbook. Features: Discusses the role of claddings fabricated with laser technique to withstand wear and corrosion Highlights the role of laser in the manufacturing of alloys and recent advancements in laser based additive manufacturing processes Presents the possibilities, applications and challenges in laser surfacing Illustrates the post-treatments of powders and coatings and case studies related to laser surface technology Offers the standard methods of testing applied to various types of biomedical devices and tools Goes over the advantages of combining laser cladding with simultaneous induction heating The technical outcomes of these surface engineering methods are helpful for academics, students, and professionals who are working in this field, as this enlightens their understanding of the performance of these latest processes. The audience is broad and multidisciplinary.

Download or read book Standards Quality Control and Measurement Sciences in 3D Printing and Additive Manufacturing written by Chee Kai Chua and published by Academic Press. This book was released on 2017-06-03 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standards, Quality Control and Measurement Sciences in 3D Printing and Additive Manufacturing addresses the critical elements of the standards and measurement sciences in 3D printing to help readers design and create safe, reliable products of high quality. With 3D printing revolutionizing the process of manufacturing in a wide range of products, the book takes key features into account, such as design and fabrication and the current state and future potentials and opportunities in the field. In addition, the book provides an in-depth analysis on the importance of standards and measurement sciences. With self-test exercises at the end of each chapter, readers can improve their ability to take up challenges and become proficient in a number of topics related to 3D printing, including software usage, materials specification and benchmarking. - Helps the reader understand the quality framework tailored for 3D printing processes - Explains data format and process control in 3D printing - Provides an overview of different materials and characterization methods - Covers benchmarking and metrology for 3D printing