Download or read book Solder Joint Reliability Assessment written by Mohd N. Tamin and published by Springer Science & Business. This book was released on 2014-04-26 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic approach in performing reliability assessment of solder joints using Finite Element (FE) simulation. Essential requirements for FE modelling of an electronic package or a single reflowed solder joint subjected to reliability test conditions are elaborated. These cover assumptions considered for a simplified physical model, FE model geometry development, constitutive models for solder joints and aspects of FE model validation. Fundamentals of the mechanics of solder material are adequately reviewed in relation to FE formulations. Concept of damage is introduced along with deliberation of cohesive zone model and continuum damage model for simulation of solder/IMC interface and bulk solder joint failure, respectively. Applications of the deliberated methodology to selected problems in assessing reliability of solder joints are demonstrated. These industry-defined research-based problems include solder reflow cooling, temperature cycling and mechanical fatigue of a BGA package, JEDEC board-level drop test and mechanisms of solder joint fatigue. Emphasis is placed on accurate quantitative assessment of solder joint reliability through basic understanding of the mechanics of materials as interpreted from results of FE simulations. The FE simulation methodology is readily applicable to numerous other problems in mechanics of materials and structures.
Download or read book Solder Joint Reliability written by John H. Lau and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solders have given the designer of modern consumer, commercial, and military electronic systems a remarkable flexibility to interconnect electronic components. The properties of solder have facilitated broad assembly choices that have fueled creative applications to advance technology. Solder is the electrical and me chanical "glue" of electronic assemblies. This pervasive dependency on solder has stimulated new interest in applica tions as well as a more concerted effort to better understand materials properties. We need not look far to see solder being used to interconnect ever finer geo metries. Assembly of micropassive discrete devices that are hardly visible to the unaided eye, of silicon chips directly to ceramic and plastic substrates, and of very fine peripheral leaded packages constitute a few of solder's uses. There has been a marked increase in university research related to solder. New electronic packaging centers stimulate applications, and materials engineering and science departments have demonstrated a new vigor to improve both the materials and our understanding of them. Industrial research and development continues to stimulate new application, and refreshing new packaging ideas are emerging. New handbooks have been published to help both the neophyte and seasoned packaging engineer.
Download or read book Solder Joint Reliability Prediction for Multiple Environments written by Andrew E. Perkins and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solder Joint Reliability Prediction for Multiple Environments will provide industry engineers, graduate students and academic researchers, and reliability experts with insights and useful tools for evaluating solder joint reliability of ceramic area array electronic packages under multiple environments. The material presented here is not limited to ceramic area array packages only, it can also be used as a methodology for relating numerical simulations and experimental data into an easy-to-use equation that captures the essential information needed to predict solder joint reliability. Such a methodology is often needed to relate complex information in a simple manner to managers and non-experts in solder joint who work with computer server applications as well as for harsh environments such as those found in the defense, space, and automotive industries.
Download or read book Solder Joint Technology written by King-Ning Tu and published by Springer Science & Business Media. This book was released on 2007-07-27 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Union’s directive banning the use of lead-based (Pb) solders in electronic consumer products has created an urgent need for research on solder joint behavior under various driving forces in electronic manufacturing, and for development of lead-free solders. This book provides a comprehensive examination of advanced materials reliability issues related to copper-tin reaction and electromigration in solder joints, and presents methods for preventing common reliablity problems.
Download or read book Assembly and Reliability of Lead Free Solder Joints written by John H. Lau and published by Springer Nature. This book was released on 2020-05-29 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the assembly and reliability of lead-free solder joints. Both the principles and engineering practice are addressed, with more weight placed on the latter. This is achieved by providing in-depth studies on a number of major topics such as solder joints in conventional and advanced packaging components, commonly used lead-free materials, soldering processes, advanced specialty flux designs, characterization of lead-free solder joints, reliability testing and data analyses, design for reliability, and failure analyses for lead-free solder joints. Uniquely, the content not only addresses electronic manufacturing services (EMS) on the second-level interconnects, but also packaging assembly on the first-level interconnects and the semiconductor back-end on the 3D IC integration interconnects. Thus, the book offers an indispensable resource for the complete food chain of electronics products.
Download or read book Solder Joint Reliability written by John H. Lau and published by Springer Science & Business Media. This book was released on 1991-05-31 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looks at how solder joint reliability is influenced by flux reactions, solder paste, reflow methods, wave soldering, and cleaning. Explores failure mechanisms and includes practical methods for testing, analysis, and life prediction of solder joints subjected to conditions of fatigue, creep, stress relaxation, shock, and vibration. For engineers and designers involved in electronics packaging. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Solder Joint Reliability of BGA CSP Flip Chip and Fine Pitch SMT Assemblies written by John H. Lau and published by McGraw-Hill Professional Publishing. This book was released on 1997 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explosive growth of high-density packaging has created a tremendous impact on the electronic assembly and manufacturing industry. Ball grid array (BGA), chip-scale package (CSP), and solder-bumped flip chip technologies are taking the lead in this advanced manufacturing process. Many major equipment makers and leading electronic companies are now gearing up for these emerging and advanced packaging technologies. For these technologies, solder is the electrical and mechanical "glue," and thus solder joint reliability is one of the most critical issues in the development of these technologies. This book is a one-stop guide to the state of the art of solder joint reliability problem-solving methods, or choose a creative, high-performance, robust, and cost-effective design and high-yield manufacturing process for their interconnect systems will be able to do so with this unique sourcebook. It meets the reference needs of design, material, process, equipment, manufacturing, quality control, product assurance, reliability, component, packaging, vendor, marketing, and system engineers, and technical managers working in electronic packaging and interconnection. This book is structured to provide readers with the necessary know-how for practical, on-the-job problem-solving guidance. The book covers the solder joint reliability of BGA, CSP, flip chip, and FPT assemblies completely, proceeding from the theoretical basics to applications. Specific areas covered include: Definition of reliability, life distribution, failure rate, mean time to failure, etc.; Some well-known life distributions; Accelerated testing; Parameter estimation of life distributions; Acceleration factors for solders;Solder mechanics: plasticity, creep, and constitutive equations; Design, material, and manufacturing processes of BGA, CSP, flip chip, and FTP; Failure analysis and root cause of failure for BGA, CSP, flip chip, and FPT solder joints; Design for reliability of BGA, CSP, flip chip and FPT solder joints; Solder joint reliability of CBGA, PBGA, DBGA, and TBGA assemblies under thermal fatigue, mechanical bending and twisting, and shock and vibration conditions; solder joint reliability of flip chip (e.g., high-temperature and eutectic solder bumped flip chips on ceramic and PCB) assemblies under thermal fatigue, mechanical pulling, shearing, bending and twisting, and shock and vibration conditions; Solder joint reliability of CSP (e.g., LG Semicon's, Mitsubishi's, Motorola's, Tessera's, NEC's, nitto Denko's and Toshiba's) assemblies under thermal fatigue and mechanical bending conditions; Solder joint reliability of PQFP and TSOP assemblies under thermal fatigue, mechanical bending and twisting, and vibration conditions.
Download or read book Solder Joint Reliability written by John H. Lau and published by . This book was released on 2014-09-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Life Prediction of Solder Joints in Electronic Packages with Ansys written by Erdogan Madenci and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Life Prediction of Solder Joints in Electronic Packages with ANSYS® describes the method in great detail starting from the theoretical basis. The reader is supplied with an add-on software package to ANSYS® that is designed for solder joint fatigue reliability analysis of electronic packages. Specific steps of the analysis method are discussed through examples without leaving any room for confusion. The add-on package along with the examples make it possible for an engineer with a working knowledge of ANSYS® to perform solder joint reliability analysis. Fatigue Life Prediction of Solder Joints in Electronic Packages with ANSYS® allows the engineers to conduct fatigue reliability analysis of solder joints in electronic packages.
Download or read book Lead Free Solder written by John Hock Lye Pang and published by Springer Science & Business Media. This book was released on 2011-10-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lead-free solders are used extensively as interconnection materials in electronic assemblies and play a critical role in the global semiconductor packaging and electronics manufacturing industry. Electronic products such as smart phones, notebooks and high performance computers rely on lead-free solder joints to connect IC chip components to printed circuit boards. Lead Free Solder: Mechanics and Reliability provides in-depth design knowledge on lead-free solder elastic-plastic-creep and strain-rate dependent deformation behavior and its application in failure assessment of solder joint reliability. It includes coverage of advanced mechanics of materials theory and experiments, mechanical properties of solder and solder joint specimens, constitutive models for solder deformation behavior; numerical modeling and simulation of solder joint failure subject to thermal cycling, mechanical bending fatigue, vibration fatigue and board-level drop impact tests.
Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Download or read book Mechanics of Solder Alloy Interconnects written by Darrel R. Frear and published by Springer Science & Business Media. This book was released on 1994-01-31 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Solder Alloy Interconnects is a resource to be used in developing a solder joint reliability assessment. Each chapter is written to be used as a stand-alone resource for a particular aspect of materials and modeling issues. With this gained understanding, the reader in search of a solution to a solder joint reliability problem knows where in the materials and modeling communities to go for the appropriate answer.
Download or read book Lead free Soldering Process Development and Reliability written by Jasbir Bath and published by John Wiley & Sons. This book was released on 2020-06-12 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the major topics in lead-free soldering Lead-free Soldering Process Development and Reliability provides a comprehensive discussion of all modern topics in lead-free soldering. Perfect for process, quality, failure analysis and reliability engineers in production industries, this reference will help practitioners address issues in research, development and production. Among other topics, the book addresses: · Developments in process engineering (SMT, Wave, Rework, Paste Technology) · Low temperature, high temperature and high reliability alloys · Intermetallic compounds · PCB surface finishes and laminates · Underfills, encapsulants and conformal coatings · Reliability assessments In a regulatory environment that includes the adoption of mandatory lead-free requirements in a variety of countries, the book’s explanations of high-temperature, low-temperature, and high-reliability lead-free alloys in terms of process and reliability implications are invaluable to working engineers. Lead-free Soldering takes a forward-looking approach, with an eye towards developments likely to impact the industry in the coming years. These will include the introduction of lead-free requirements in high-reliability electronics products in the medical, automotive, and defense industries. The book provides practitioners in these and other segments of the industry with guidelines and information to help comply with these requirements.
Download or read book Solder Joint Reliability of Bga Csp Flip Chip and Fine Pitch Smt Assemblies written by John H. Lau and published by McGraw-Hill Professional Publishing. This book was released on 1997 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume by interconnection expert on solder joints, Johns H. Lau, deals with BGA, CSP, Flip Chips, and other new technologies that underlie the electronics industry's need for smaller, faster products. Naturally, as ever-smaller products are created, the reliability of the solder joints that bind them becomes increasingly crucial. Balancing concepts and practical applications, the authors explain the fundamentals of solder joint reliability and present creative, robust packaging techniques for cost-effective interconnection.
Download or read book A Guide to Lead free Solders written by John W. Evans and published by Springer Science & Business Media. This book was released on 2007-01-05 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is important because it reflects a trend, especially in microelectronics manufacture toward recyclability. Europe and Asia are moving towards legislation to ban the use of lead in solders and public demand in the US will likely have the same result. Producers of solders and manufacturers who use them will have to invent and employ suitable substitutes and A Guide to Lead-free Solders will show them how to do so.
Download or read book Lead Free Solder Interconnect Reliability written by Dongkai Shangguan and published by ASM International. This book was released on 2005 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid State Lighting Reliability Part 2 written by Willem Dirk van Driel and published by Springer. This book was released on 2018-08-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past four years we have witnessed rapid development in technology and significant market penetration in many applications for LED systems. New processes and new materials have been introduced; new standards and new testing methods have been developed; new driver, control and sensing technologies have been integrated; and new and unknown failure modes have also been presented. In this book, Solid State Lighting Reliability Part 2, we invited the experts from industry and academia to present the latest developments and findings in the LED system reliability arena. Topics in this book cover the early failures and critical steps in LED manufacturing; advances in reliability testing and standards; quality of colour and colour stability; degradation of optical materials and the associated chromaticity maintenance; characterization of thermal interfaces; LED solder joint testing and prediction; common failure modes in LED drivers; root causes for lumen depreciation; corrosion sensitivity of LED packages; reliability management for automotive LEDs, and lightning effects on LEDs. This book is a continuation of Solid State Lighting Reliability: Components to Systems (published in 2013), which covers reliability aspects ranging from the LED to the total luminaire or system of luminaires. Together, these two books are a full set of reference books for Solid State Lighting reliability from the performance of the (sub-) components to the total system, regardless its complexity.
