Download or read book Solar Materials Science written by Lawrence Murr and published by Elsevier. This book was released on 2012-12-02 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Materials Science is a collection of lecture series on solar and other related energy technologies, sponsored by the New Mexico Joint Center for Materials Science. This book is divided into three sections encompassing 21 chapters that discuss the basic concepts of materials science, their utilization in solar technology, and examples of this utilization and the technology. The introductory chapters present an overview of the solar materials science and technology. Section I describes the optical properties, microstructure, and materials used in solar collectors and mirrors. This section also examines metals emissivity, spectral selectivity of composite for absorbers, and corrosion of solar thermal energy materials. Section II deals with the application of thermodynamic principles and reversible chemical reactions to solar storage systems. This section also considers the materials problems encountered during the development of thermochemical concepts and schemes. Section III focuses on the principles, materials used, and encountered problems in the development of photovoltaic systems. The optimization of solar conversion devices is also covered in this section. Undergraduate and graduate students in metallurgy, metallurgical and materials engineering, materials science, electrical and mechanical engineering, engineering science, and solid-state physics and chemistry will greatly benefit from this book.
Download or read book Materials Science for Solar Energy Conversion Systems written by C.G. Granqvist and published by Elsevier. This book was released on 2013-10-22 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid advances in materials technology are creating many novel forms of coatings for energy efficient applications in solar energy. Insulating heat mirrors, selective absorbers, transparent insulation and fluorescent concentrators are already available commercially. Radiative cooling, electrochromic windows and polymeric light pipes hold promise for future development, while chemical and photochemical processes are being considered for energy storage. This book investigates new material advances as well as applications, costs, reliability and industrial production of existing materials. Each contribution represents a landmark in the field of materials science.
Download or read book The Physics Of Solar Cells written by Jenny A Nelson and published by World Scientific Publishing Company. This book was released on 2003-05-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the physics of the photovoltaic cell. It is suitable for undergraduates, graduate students, and researchers new to the field. It covers: basic physics of semiconductors in photovoltaic devices; physical models of solar cell operation; characteristics and design of common types of solar cell; and approaches to increasing solar cell efficiency. The text explains the terms and concepts of solar cell device physics and shows the reader how to formulate and solve relevant physical problems. Exercises and worked solutions are included.
Download or read book Nanostructured Materials for Solar Energy Conversion written by Tetsuo Soga and published by Elsevier. This book was released on 2006-12-14 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Materials for Solar Energy Conversion covers a wide variety of materials and device types from inorganic materials to organic materials. This book deals with basic semiconductor physics, modelling of nanostructured solar cell, nanostructure of conventional solar cells such as silicon, CIS and CdTe, dye-sensitized solar cell, organic solar cell, photosynthetic materials, fullerene, extremely thin absorber (ETA) solar cell, quantum structured solar cell, intermediate band solar cell, carbon nanotube, etc. including basic principle and the latest results. There are many books written on conventional p-n junction solar cells, but few books focus on new concepts in this area.* Focuses on the use of nanostructured materials for solar energy* Looks at a wide variety of materials and device types* Covers both organic and inorganic materials
Download or read book High Efficiency Solar Cells written by Xiaodong Wang and published by Springer Science & Business Media. This book was released on 2013-11-01 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the effort to increase the contribution of solar cells (photovoltaics) to our energy mix, this book addresses three main areas: making existing technology cheaper, promoting advanced technologies based on new architectural designs, and developing new materials to serve as light absorbers. Leading scientists throughout the world create a fundamental platform for knowledge sharing that combines the physics, materials, and device architectures of high-efficiency solar cells. While providing a comprehensive introduction to the field, the book highlights directions for further research, and is intended to stimulate readers’ interest in the development of novel materials and technologies for solar energy applications.
Download or read book Semiconductor Materials for Solar Photovoltaic Cells written by M. Parans Paranthaman and published by Springer. This book was released on 2015-09-16 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current status of semiconductor materials for conversion of sunlight to electricity, and highlights advances in both basic science and manufacturing. Photovoltaic (PV) solar electric technology will be a significant contributor to world energy supplies when reliable, efficient PV power products are manufactured in large volumes at low cost. Expert chapters cover the full range of semiconductor materials for solar-to-electricity conversion, from crystalline silicon and amorphous silicon to cadmium telluride, copper indium gallium sulfide selenides, dye sensitized solar cells, organic solar cells, and environmentally friendly copper zinc tin sulfide selenides. The latest methods for synthesis and characterization of solar cell materials are described, together with techniques for measuring solar cell efficiency. Semiconductor Materials for Solar Photovoltaic Cells presents the current state of the art as well as key details about future strategies to increase the efficiency and reduce costs, with particular focus on how to reduce the gap between laboratory scale efficiency and commercial module efficiency. This book will aid materials scientists and engineers in identifying research priorities to fulfill energy needs, and will also enable researchers to understand novel semiconductor materials that are emerging in the solar market. This integrated approach also gives science and engineering students a sense of the excitement and relevance of materials science in the development of novel semiconductor materials. · Provides a comprehensive introduction to solar PV cell materials · Reviews current and future status of solar cells with respect to cost and efficiency · Covers the full range of solar cell materials, from silicon and thin films to dye sensitized and organic solar cells · Offers an in-depth account of the semiconductor material strategies and directions for further research · Features detailed tables on the world leaders in efficiency demonstrations · Edited by scientists with experience in both research and industry
Download or read book Sustainable Material Solutions for Solar Energy Technologies written by Mariana Amorim Fraga and published by Elsevier. This book was released on 2021-08-18 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Material Solutions for Solar Energy Technologies: Processing Techniques and Applications provides an overview of challenges that must be addressed to efficiently utilize solar energy. The book explores novel materials and device architectures that have been developed to optimize energy conversion efficiencies and minimize environmental impacts. Advances in technologies for harnessing solar energy are extensively discussed, with topics including materials processing, device fabrication, sustainability of materials and manufacturing, and current state-of-the-art. Leading international experts discuss the applications, challenges, and future prospects of research in this increasingly vital field, providing a valuable resource for students and researchers working in this field. - Explores the fundamentals of sustainable materials for solar energy applications, with in-depth discussions of the most promising material solutions for solar energy technologies: photocatalysis, photovoltaic, hydrogen production, harvesting and storage - Discusses the environmental challenges to be overcome and importance of efficient materials utilization for clean energy - Looks at design materials processing and optimization of device fabrication via metrics such as power-to-weight ratio, effectiveness at EOL compared to BOL, and life-cycle analysis
Download or read book Materials Concepts For Solar Cells Second Edition written by Thomas Dittrich and published by World Scientific Publishing Company. This book was released on 2018-01-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern challenge is for solar cell materials to enable the highest solar energy conversion efficiencies, at costs as low as possible, and at an energy balance as sustainable as necessary in the future. This textbook explains the principles, concepts and materials used in solar cells. It combines basic knowledge about solar cells and the demanded criteria for the materials with a comprehensive introduction into each of the four classes of materials for solar cells, i.e. solar cells based on crystalline silicon, epitaxial layer systems of III-V semiconductors, thin-film absorbers on foreign substrates, and nano-composite absorbers. In this sense, it bridges a gap between basic literature on the physics of solar cells and books specialized on certain types of solar cells.The last five years had several breakthroughs in photovoltaics and in the research on solar cells and solar cell materials. We consider them in this second edition. For example, the high potential of crystalline silicon with charge-selective hetero-junctions and alkaline treatments of thin-film absorbers, based on chalcopyrite, enabled new records. Research activities were boosted by the class of hybrid organic-inorganic metal halide perovskites, a promising newcomer in the field.This is essential reading for students interested in solar cells and materials for solar cells. It encourages students to solve tasks at the end of each chapter. It has been well applied for postgraduate students with background in materials science, engineering, chemistry or physics.
Download or read book Characterization Techniques for Perovskite Solar Cell Materials written by Meysam Pazoki and published by Elsevier. This book was released on 2019-11-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization Techniques for Perovskite Solar Cell Materials: Characterization of Recently Emerged Perovskite Solar Cell Materials to Provide an Understanding of the Fundamental Physics on the Nano Scale and Optimize the Operation of the Device Towards Stable and Low-Cost Photovoltaic Technology explores the characterization of nanocrystals of the perovskite film, related interfaces, and the overall impacts of these properties on device efficiency. Included is a collection of both main and research techniques for perovskite solar cells. For the first time, readers will have a complete reference of different characterization techniques, all housed in a work written by highly experienced experts. - Explores various characterization techniques for perovskite solar cells and discusses both their strengths and weaknesses - Discusses material synthesis and device fabrication of perovskite solar cells - Includes a comparison throughout the work on how to distinguish one perovskite solar cell from another
Download or read book Advanced Solar Cell Materials Technology Modeling and Simulation written by Fara, Laurentiu and published by IGI Global. This book was released on 2012-07-31 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: While measuring the effectiveness of solar cell materials may not always be practical once a device has been created, solar cell modeling may allow researchers to obtain prospective analyses of the internal processes of potential materials prior to their manufacture. Advanced Solar Cell Materials, Technology, Modeling, and Simulation discusses the development and use of modern solar cells made from composite materials. This volume is targeted toward experts from universities and research organizations, as well as young professionals interested in pursuing different subjects regarding advanced solar cells.
Download or read book Solar Cell Materials written by Arthur Willoughby and published by John Wiley & Sons. This book was released on 2014-03-03 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comparison of solar cell materials, including both new materials based on organics, nanostructures and novel inorganics and developments in more traditional photovoltaic materials. It surveys the materials and materials trends in the field including third generation solar cells (multiple energy level cells, thermal approaches and the modification of the solar spectrum) with an eye firmly on low costs, energy efficiency and the use of abundant non-toxic materials.
Download or read book Organic Solar Cells written by Qiquan Qiao and published by CRC Press. This book was released on 2017-12-19 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current energy consumption mainly depends on fossil fuels that are limited and can cause environmental issues such as greenhouse gas emissions and global warming. These factors have stimulated the search for alternate, clean, and renewable energy sources. Solar cells are some of the most promising clean and readily available energy sources. Plus, the successful utilization of solar energy can help reduce the dependence on fossil fuels. Recently, organic solar cells have gained extensive attention as a next-generation photovoltaic technology due to their light weight, mechanical flexibility, and solution-based cost-effective processing. Organic Solar Cells: Materials, Devices, Interfaces, and Modeling provides an in-depth understanding of the current state of the art of organic solar cell technology. Encompassing the full spectrum of organic solar cell materials, modeling and simulation, and device physics and engineering, this comprehensive text: Discusses active layer, interfacial, and transparent electrode materials Explains how to relate synthesis parameters to morphology of the photoactive layer using molecular dynamics simulations Offers insight into coupling morphology and interfaces with charge transport in organic solar cells Explores photoexcited carrier dynamics, defect states, interface engineering, and nanophase separation Covers inorganic–organic hybrids, tandem structure, and graphene-based polymer solar cells Organic Solar Cells: Materials, Devices, Interfaces, and Modeling makes an ideal reference for scientists and engineers as well as researchers and students entering the field from broad disciplines including chemistry, material science and engineering, physics, nanotechnology, nanoscience, and electrical engineering.
Download or read book Solar Cells and Energy Materials written by Takeo Oku and published by Walter de Gruyter GmbH & Co KG. This book was released on 2016-12-19 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Cells and Energy Materials takes an in-depth look at the basics behind energy, solar energy as well as future and alternative energy materials. The author presents insights into the current state-of-the-art of solar cells, including their basic science, inorganic, organic and Perovskite-type cells. The author also gives an outlook into next generation energy materials and sources. The focus of this book is not only the presentation of available and developing energy materials, but their thorough examination and characterization. In addition to solar cell technology and the promising application of nanostructures like quantum dots, the author discusses the science and potential of nuclear fusion materials and other energy materials like hydrogen storage materials, BN nanomaterials, alternative fuel cells and SIC FET.
Download or read book Solar Cells written by S. K. Sharma and published by Springer Nature. This book was released on 2020-01-07 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the rapidly developing class of solar cell materials and designed to provide much needed information on the fundamental principles of these materials, together with how these are employed in photovoltaic applications. A special emphasize have been given for the space applications through study of radiation tolerant solar cells. This book present a comprehensive research outlining progress on the synthesis, fabrication and application of solar cells from fundamental to device technology and is helpful for graduate students, researchers, and technologists engaged in research and development of materials.
Download or read book Solar Materials Science written by Lawrence E. Murr and published by . This book was released on 1980 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Cells and Light Management written by Francesco Enrichi and published by Elsevier. This book was released on 2019-10-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Cells and Light Management: Materials, Strategies and Sustainability provides an extensive review on the latest advances in PV materials, along with light management strategies for better exploiting the solar spectrum. Following a brief review of the current status of solar cells, the book discusses different concepts, principles and technologies for solar devices, starting with standard silicon cells and then covering organic-hybrid, DSSC, perovskite, quantum dots and nanostructured oxide solar cells. Other sections focus on light manipulation and spectral modification, materials for spectral conversion, and environmental and sustainably considerations. An emergy analysis, which is an extension of the Life Cycle Assessment methodology, is applied to the study of solar PV systems, thus allowing for effective integrated indicators.
Download or read book Materials Science in Solar Cell Development written by and published by . This book was released on 1992 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
