Download or read book Sol Gel Nanocomposites written by Massimo Guglielmi and published by Springer. This book was released on 2014-07-05 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of nanocomposite materials obtained by the sol-gel method, from synthesis to applications and including design tools for combining different properties. Sol-gel nanocomposites are of great interest in meeting processing and application requirements for the development of multifunctional materials. These materials are already commercialized for a number of applications from scratch-resistant and anti-adhesive coatings to optical materials with active and passive properties. Biomedical applications, holographic recordings, fuel cells and hydrogen storage, resists and catalysts are among the potential uses. The novel mechanical, optical and electronic properties of nanocomposite materials depend not only on the individual component materials, but also on their morphology and nanoscale interfacial characteristics. Sol-gel is a highly versatile method for obtaining both the matrix and the filler of the nanocomposite and for chemically adjusting the interface to optimize structure and properties. Although nanocomposites are widely discussed in the literature, the focus has been mainly on polymer nanocomposites. This book addresses nanocomposites based on inorganic or hybrid organic-inorganic matrices, with an emphasis on the scientific principles which are the basis for nanocomposite sol-gel synthesis and applications. A didactic approach is followed, with different topics developed from a fundamental point of view together with key examples and case studies. First comprehensive treatment of nanocomposites obtained by sol-gel methods Focuses on nanocomposites with inorganic and hybrid organic-inorganic matrices Describes design tools to optimize structure and properties for various applications Covers synthesis, processing, characterization, and modeling Uses first principles to describe the influence of interfacial characteristics on materials properties Presents case studies for both films and bulk applications Provides examples of products on the market, with descriptions of the scientific principles at the base of their success Includes contributions from recognized leaders in this multidisciplinary area.
Download or read book Sol Gel Preparation and Characterization of Metal Silica and Metal Oxide Silica Nanocomposites written by G. Piccaluga and published by Trans Tech Publications Ltd. This book was released on 2000-02-21 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials with nanometer size particles exhibit unique chemical and physical properties. In particular, nanocomposite materials, composed of nanometric metal and metal oxide particles embedded in vitreous matrices, present a variety of interesting magnetic, electric and catalytic properties, that are strongly size-dependent. Among the different preparation methods which can be used to obtain this kind of materials, the sol-gel process is particularly interesting because it is affected by several parameters which allow a versatile control of the structural, textural and chemical properties of the final products. The present volume focusses on the preparation of metal-silica and metal oxide-silica (Me=Ni, Fe, Zn) nanocomposites by the sol-gel method and the characterization of their structural and magnetic properties.
Download or read book The Sol Gel Handbook written by David Levy and published by John Wiley & Sons. This book was released on 2015-08-28 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book Molecular Chemistry of Sol Gel Derived Nanomaterials written by Robert Corriu and published by John Wiley & Sons. This book was released on 2009-02-18 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the wide range of synthetic possibilities opened by sol-gel processes in the field of organic-inorganic materials, Molecular Chemistry of Sol-Gel Derived Nanomaterials discusses the state of the art in the synthesis of the various nanomaterials. The text includes examples of applications, including photoluminescent nanocomposites, grafted nanomaterials for selective separations of ions or isotopes, for cascade syntheses, chelation of transition metals and lanthanides by lamellar structured nanomaterials, and immobilized enzymes on mesoporous nanomaterials. This indispensable text for graduate students, engineers, and scientists concludes with a look toward future developments.
Download or read book Sol gel Based Nanoceramic Materials Preparation Properties and Applications written by Ajay Kumar Mishra and published by Springer. This book was released on 2016-12-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes recent research and development in the field of nanostructured ceramics and their composites. It presents selected examples of ceramic materials with special electronic, catalytic and optical properties and exceptional mechanical characteristics. A special focus is on sol-gel based and organic-inorganic hybrid nanoceramic materials. The book highlights examples for preparation techniques including scale-up, properties of smart ceramic composites, and applications including e.g. waste water treatment, heavy metal removal, sensors, electronic devices and fuel cells. Recent challenges are addressed and potential solutions are suggested for these. This book hence addresses chemists, materials scientists, and engineers, working with nanoceramic materials and on their applications.
Download or read book Sol Gel Processing for Conventional and Alternative Energy written by Mario Aparicio and published by Springer Science & Business Media. This book was released on 2012-02-04 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Processing for Conventional and Alternative Energy is a comprehensive source of information on the use of sol-gel processing in materials in energy systems, conversion, storage, and generation. The volume editors include numerous applications, primarily in nuclear fuel processing, electrolytes for fuel cells, and dye-sensitized solar cells (DSSC). In addition to examining contemporary processing, properties, and industrial applications, "Sol-Gel Processing for Conventional and Alternative Energy" identifies materials challenges presented by conventional and alternative energy generation that require new materials and innovative processing. Each chapter is written by an internationally respected researcher. The book provides a state-of-the-art treatment of different aspects of materials for energy production, with a focus on processing, and covers related topics such as carbon sequestration, clean energy, and biofuels.
Download or read book Nanocomposites and Polymers with Analytical Methods written by John Cuppoletti and published by BoD – Books on Demand. This book was released on 2011-08-09 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 16 chapters. In the first part, there are 8 chapters describing new materials and analytic methods. These materials include chapters on gold nanoparticles and Sol-Gel metal oxides, nanocomposites with carbon nanotubes, methods of evaluation by depth sensing, and other methods. The second part contains 3 chapters featuring new materials with unique properties including optical non-linearities, new materials based on pulp fibers, and the properties of nano-filled polymers. The last part contains 5 chapters with applications of new materials for medical devices, anodes for lithium batteries, electroceramics, phase change materials and matrix active nanoparticles.
Download or read book Sol Gel Processing and Applications written by Y.A. Attia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: During my professional career, I developed a strong interest in sol-gel technology, and worked on both xerogel and aerogel systems. My fascination with aerogels has driven me to explore their commercial potential, which is currently an important component of my company's business plan. Together with my co-workers, I have also worked on the preparation of controlled PZT and silica xerogels as well as thin film coatings of metals by the sol-gel technology, These experiences convinced me of the tremendous potentials of this technology. A conviction that is shared by many scientists, engineers, and business leaders around the globe. Many sol-gel derived products are already articles of commerce. However, to expand the commercial potential of sol-gel technology, two challenges must be met: (1) the quality of sol-gel derived products must continue to meet or exceed the quality of competing products, (2) the production cost of sol-gel products (specially aerogels) must continued to decline. A key to lowering the costs of sol-gel products is finding inexpensive precursors.
Download or read book Sol Gel Materials written by John D. Wright and published by CRC Press. This book was released on 2018-10-03 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel processing methods, first used historically for decorative and constructional materials, were extensively developed in the last century for applications such as glasses, ceramics, catalysts, coatings, composites and fibres. Today they are reaching their full potential, enabling the preparation of new generations of advanced materials not easily accessible by other methods yet using mild, low-energy conditions. The topic is therefore increasingly included in advanced undergraduate, MSc and PhD programmes in the areas of chemistry, physics and materials science. This concise introductory text, written at the advanced undergraduate/first-year postgraduate level, is also suitable as an introduction to the development, mechanisms, chemistry, characterisation methods and applications of the technique. It provides readers with an extensive yet concise grounding in the theory of each area of the subject and details the real and potential applications and the future prospects of sol-gel chemistry.
Download or read book Organic and Carbon Gels written by Ana Arenillas and published by Springer. This book was released on 2019-06-04 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Sol Gel Science and Technology written by Lisa Klein and published by Springer Nature. This book was released on 2018-05-31 with total page 3755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated and expanded second edition stands as a comprehensive knowledgebase on both the fundamentals and applications of this important materials processing method. The diverse, international team of contributing authors of this reference clarify in extensive detail properties and applications of sol-gel science and technology as it pertains to the production of substances, active and non-active, including optical, electronic, chemical, sensor, bio- and structural materials. Essential to a wide range of manufacturing industries, the compilation divides into the three complementary sections: Sol-Gel Processing, devoted to general aspects of processing and recently developed materials such as organic-inorganic hybrids, photonic crystals, ferroelectric coatings, and photocatalysts; Characterization of Sol-Gel Materials and Products, presenting contributions that highlight the notion that useful materials are only produced when characterization is tied to processing, such as determination of structure by NMR, in-situ characterization of the sol-gel reaction process, determination of microstructure of oxide gels, characterization of porous structure of gels by the surface measurements, and characterization of organic-inorganic hybrid; and Applications of Sol-Gel Technology, covering applications such as the sol-gel method used in processing of bulk silica glasses, bulk porous gels prepared by sol-gel method, application of sol-gel method to fabrication of glass and ceramic fibers, reflective and antireflective coating films, application of sol-gel method to formation of photocatalytic coating films, and application of sol-gel method to bioactive coating films. The comprehensive scope and integrated treatment of topics make this reference volume ideal for R&D scientists and engineers across a wide range of disciplines and professional interests.
Download or read book Recent Applications in Sol Gel Synthesis written by Usha Chandra and published by BoD – Books on Demand. This book was released on 2017-07-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Versatility, extended compositional ranges, better homogeneity, lesser energy consumption, and requirement of nonexpensive equipments have boosted the use of sol-gel process on top of the popularity in the synthesis of nanosystems. The sol-gel technique has not only revolutionized oxide ceramics industry and/or material science but has also extended widely into multidimensional applications. The book Recent Applications in Sol-Gel Synthesis comprises 14 chapters that deal mainly with the application-oriented aspects of the technique. Sol-gel prepared metal oxide (MO) nanostructures like nanospheres, nanorods, nanoflakes, nanotubes, and nanoribbons have been employed in biomedical applications involving drug deliveries, mimicking of natural bone, and antimicrobial activities. The possibility of controlling grain size in aerogel and preparation of ultrahigh-temperature ceramic (UHTC)-based materials, fluorescent glasses, ultraviolet photosensors, and photocatalysts have been discussed in detail by the experts in the field. The usefulness of sol-gel materials as active GRIN, as textile finisher, and as leather modifier with water-repellent and oil-resistive properties would be an incentive for researchers keen to pursue the field.
Download or read book Nanocomposites and Polymers with Analytical Methods written by John Cuppoletti and published by IntechOpen. This book was released on 2011-08-09 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 16 chapters. In the first part, there are 8 chapters describing new materials and analytic methods. These materials include chapters on gold nanoparticles and Sol-Gel metal oxides, nanocomposites with carbon nanotubes, methods of evaluation by depth sensing, and other methods. The second part contains 3 chapters featuring new materials with unique properties including optical non-linearities, new materials based on pulp fibers, and the properties of nano-filled polymers. The last part contains 5 chapters with applications of new materials for medical devices, anodes for lithium batteries, electroceramics, phase change materials and matrix active nanoparticles.
Download or read book Hybrid Nanocomposites for Nanotechnology written by Lhadi Merhari and published by Springer Science & Business Media. This book was released on 2009-03-03 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advances in polymer-inorganic nanocomposites, with particular focus on high-added-value applications in fields including electronics, optics, magnetism and biotechnology. The unique focus of this book is on electronic, optical, magnetic and biomedical applications of hybrid nanocomposites. Coverage includes: Synthesis methods and issues and production scale-up; Characterization methods; Electronic applications; Optical applications and Photonics; Magnetic applications; and Biomedical applications. The book offers readers a solid grasp of the state of the art, and of current challenges in non-traditional applications of hybrid nanocomposites.
Download or read book Glass Nanocomposites written by Basudeb Karmakar and published by William Andrew. This book was released on 2016-01-19 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass Nanocomposites: Synthesis, Properties and Applications provides the latest information on a rapidly growing field of specialized materials, bringing light to new research findings that include a growing number of technologies and applications. With this growth, a new need for deep understanding of the synthesis methods, composite structure, processing and application of glass nanocomposites has emerged. In the book, world renowned experts in the field, Professors Karmakar, Rademann, and Stepanov, fill the knowledge gap, building a bridge between the areas of nanoscience, photonics, and glass technology. The book covers the fundamentals, synthesis, processing, material properties, structure property correlation, interpretation thereof, characterization, and a wide range of applications of glass nanocomposites in many different devices and branches of technology. Recent developments and future directions of all types of glass nanocomposites, such as metal-glasses (e.g., metal nanowire composites, nanoglass-mesoporous silica composites), semiconductor-glass and ceramic-glass nanocomposites, as well as oxide and non-oxide glasses, are also covered in great depth. Each chapter is logically structured in order to increase coherence, with each including question sets as exercises for a deeper understanding of the text. Provides comprehensive and up-to-date knowledge and literature review for both the oxide and non-oxide glass nanocomposites (i.e., practically all types of glass nanocomposites) Reviews a wide range of synthesis types, properties, characterization, and applications of diverse types of glass nanocomposites Presents future directions of glass nanocomposites for researchers and engineers, as well as question sets for use in university courses
Download or read book The Sol Gel Handbook 3 Volume Set written by David Levy and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 1604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive three-volume handbook brings together a review of the current state together with the latest developments in sol-gel technology to put forward new ideas. The first volume, dedicated to synthesis and shaping, gives an in-depth overview of the wet-chemical processes that constitute the core of the sol-gel method and presents the various pathways for the successful synthesis of inorganic and hybrid organic-inorganic materials, bio- and bio-inspired materials, powders, particles and fibers as well as sol-gel derived thin films, coatings and surfaces. The second volume deals with the mechanical, optical, electrical and magnetic properties of sol-gel derived materials and the methods for their characterization such as diffraction methods and nuclear magnetic resonance, infrared and Raman spectroscopies. The third volume concentrates on the various applications in the fields of membrane science, catalysis, energy research, biomaterials science, biomedicine, photonics and electronics.
Download or read book Nanocomposites written by J. Paulo Davim and published by Walter de Gruyter. This book was released on 2013-06-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites are currently defined "as a multiphase solid material where one of the phases has one, two or three dimensions of less than 100 nanometers or structures having nano-scale repeat distances between the different phases that make up the material". The use of nanocomposites with polymer, metal or ceramic matrices has increased in various areas of engineering and technology due to their special properties, with applications in bioengineering, battery cathodes, automotives, sensors and computers, as well other advanced industries. The present volume aims to provide recent information on nanocomposites (materials manufacturing and engineering) in six chapters. The chapter 1 of the book provides information on synthesis and characterization of ceramic hollow nanocomposites and nanotraps. Chapter 2 is dedicated to recent advances on preparation, properties and applications polyurathene nanocomposites. Chapter 3 described preparation, characterization and properties of organoclays, carbon nanofibers and carbon nanotubes based polymer nanocomposites. Chapter 4 contains information on mechanical and wear properties of multi-scale phase reinforced composites. Chapter 5 described modeling mechanical properties of nanocomposites Finally, chapter 6 is dedicated to polyanaline derivates and carbon nanotubes and their characterization. This book is the essential reference for academics, materials and physics researchers, materials, mechanical and manufacturing engineers, and professionals in nanocomposite-related industries.
