Download or read book Sol gel Derived Titania Based Ceramic Thin Films for Implant Coatings written by Sami Areva and published by . This book was released on 2006 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sol Gel Methods for Materials Processing written by Yuriy L. Zub and published by Springer Science & Business Media. This book was released on 2008-07-01 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-gel processing is a soft-chemistry method to obtain functional materials at low temperatures. This route can be used to produce very sophisticated nanomaterials and to tailor the materials to very specific applications. Adsorption and detection of pollutants, water purification and soil remediation represent challenging fields of application that can be exploited by sol-gel materials. In this volume several contributions from invited speakers and participants at the NATO advanced research workshop on "Sol-gel approaches to materials for pollution control, water purification and soil remediation", which has been held in Kiev, Ukraine on October 2007, are reported. The book offers a wide and updated overview of the most advanced sol-gel methods for materials processing and at the same time presents several case studies concerning possible solutions for environmental issues. General articles on sol-gel from the invited speakers and focused research articles allow getting inside sol-gel applications on this very important field.
Download or read book Surface Coating and Modification of Metallic Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2015-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. - An expansive overview of surface modification techniques for biomedical use - In-depth exploration of issues arising from metal biomaterial use - Includes examples of applications in a clinical setting
Download or read book Biological and Biomedical Coatings Handbook written by Sam Zhang and published by CRC Press. This book was released on 2011-05-24 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a versatile, contemporary style that will benefit both novice and expert alike, Biological and Biomedical Coatings Handbook, Two-Volume Set covers the state of the art in the development and implementation of advanced thin films and coatings in the biological field. Consisting of two volumes-Processing and Characterization and Applicatio
Download or read book Functional Ceramic Coatings written by Bozena Pietrzyk and published by MDPI. This book was released on 2021-05-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic materials in the form of coatings can significantly improve the functionality and applications of other engineering materials. Due to a wide range of controllable features and various deposition methods, it is possible to create tailored substrate–coating systems that meet the requirements of modern technologies. Therefore, it is crucial to understand the relationships between the structures, morphology and the properties of ceramic coatings and expand the base of scientific knowledge about them. This book contains a series of fourteen articles which present research on the production and properties of ceramic coatings designed to improve functionality for advanced applications.
Download or read book Bioimplants Manufacturing written by Abhilash P M and published by CRC Press. This book was released on 2024-09-04 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text covers fundamentals and technological advancements in processing, post-processing, and surface engineering of bioimplant materials. It further discusses important topics such as the additive manufacturing of bioimplants, the tribological performance of bioimplants, and the hybrid and non-traditional manufacturing of bioimplants materials. The text also presents the latest advancements in intelligent bioimplant manufacturing using artificial intelligence and machine learning. This book: Offers an in-depth understanding of the fundamentals, types, materials and applications of bioimplants Highlights the effect of processing on microstructure, biocompatibility, and mechanical behavior of bioimplants Investigates the surface modification methods and tribological performance of bioimplants Discusses additive manufacturing and non-traditional manufacturing techniques such as electrical discharge machining and electrochemical machining of bioimplants materials Covers smart technologies such as artificial intelligence and machine learning-based intelligent implant manufacturing for Industry 4.0 It is primarily written for senior undergraduate and graduate students and academic researchers in the fields of mechanical engineering, biomedical engineering, production engineering, industrial engineering, aerospace engineering, and manufacturing engineering.
Download or read book Hydroxyapatite HAp for Biomedical Applications written by Michael Mucalo and published by Elsevier. This book was released on 2015-03-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydroxyapatite in the form of hydroxycarbonate apatite is the principal mineral component of bone tissue in mammals. In Bioceramics, it is classed as a bioactive material, which means bone tissue grows directly on it when placed in apposition without intervening fibrous tissue. Hydroxyapatite is hence commonly used as bone grafts, fillers and as coatings for metal implants. This important book provides an overview of the most recent research and developments involving hydroxyapatite as a key material in medicine and its application. - Reviews the important properties of hydroxyapatite as a biomaterial - Considers a range of specific forms of the material and their advantages - Reviews a range of specific medical applications for this important material
Download or read book Functional Biomaterials Design Synthesis and Applications written by Manjie Zhang and published by Frontiers Media SA. This book was released on 2024-08-21 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early diagnosis of cancer is still a major challenge in cancer therapy. In recent years, the development of multifunctional nanomaterials has provided a new diagnosis and treatment platform to combat cancer. Polymer-inorganic nanomaterials with novel structures such as bowl-shaped/Janus/core-shell have drawn much attention owing to their diversity in composition or asymmetry in structure. More importantly, imparting unique optical, electrical, and magnetic properties to these nanocomposites can further extend their function repertoire. However, to fulfill this vision, fundamental understandings regarding strategies of precise synthesis, mechanisms of structure formation, in vivo synergistic effects in bioapplications, and biosafety of these materials are needed. Besides, nanomaterials with novel structures are well positioned for imaging-guided cancer theranostic. On one hand, nanomaterials themselves are suitable for imaging because of their intrinsic properties such as fluorescent or magnetic properties. On the other hand, nanomaterials can serve as functional platforms that integrate various therapeutic modalities including photothermal therapy, chemodynamic/ion-interference therapy, photodynamic therapy, and cuproptosis to efficiently kill cancer cells. This Research Topic aims at collecting works about synthesis, and biomedical applications of polymer/mesoporous inorganic nanomaterials, especially in the aspect of novel synthetic approaches for fabricating nanomaterials with unique structures. Additionally, we hope that in-depth research articles on this topic can provide insights into the mechanism of nanomaterials acting in cancer diagnosis and therapy. These include the mechanisms of customized drug load/release and synergistic effects in theranostics of these materials. Meanwhile, elucidations of key proteins’ roles in cancer development are also anticipated. Lastly, we hope that this topic can brew new ideas for the adaption of nanomaterials as platforms that allow for multimodal therapeutic modalities. The current Research Topic centers on the design, precise synthesis, and biomedical applications of nanomaterials. It aims to cover novel and promising research trends in nanomaterials with different morphology for cancer theranostics. Manuscripts from the following aspects, but not limited to, are welcomed: • Tailoring of asymmetrically structured (bowl-shaped, Janus, Yin Yang-like) polymer-inorganic nanomaterials; • Inorganic functional nanocrystals and functionalized mesoporous nanomaterials; • Design and synthesis of functional biomaterials, including lipids, polymers, and 2D materials • Non-viral DNA/mRNA delivery or drug/molecular inhibitor delivery; • Synthesizing biomaterials with novel nanostructures such as bowl-shaped, core-shell, spherical, Janus, and quantum dots; • Conquering drug resistance issues, tumor metastasis, and recurrence, as well as designing combination nanomedicines; • Dissecting the role of menin in prostate cancer and breast cancer: crosstalk between menin and AR signaling; • Multi-stimulus-responsive drug release and biological molecules.
Download or read book Bioceramic Coatings for Medical Implants written by Robert B. Heimann and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the progress in recent years, this book provides in-depth information on the preparation, chemistry, and engineering of bioceramic coatings for medical implants. It is authored by two renowned experts with over 30 years of experience in industry and academia, who know the potentials and pitfalls of the techniques concerned. Following an introduction to the principles of biocompatibility, they present the structures and properties of various bioceramics from alumina to zirconia. The main part of the work focuses on coating technologies, such as chemical vapor deposition, sol-gel deposition and thermal spraying. There then follows a discussion of the major interactions of bioceramics with bone or tissue cells, complemented by an overview of the in-vitro testing methods of the biomineralization properties of bioceramics. The text is rounded off by chapters on the functionalization of bioceramic coatings and a look at future trends. As a result, the authors bring together all aspects of the latest techniques for designing, depositing, testing, and implementing improved and novel bioceramic coating compositions, providing a full yet concise overview for beginners and professionals.
Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.
Download or read book Biomaterials and Engineering for Implantology written by Yoshiki Oshida and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-02-07 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials are composed of metallic materials, ceramics, polymers, composites and hybrid materials. Biomaterials used in human beings require safety regulations, toxicity, allergic reaction, etc. When used as implantable materials their biological compatibility, biomechanical compatibility, and morphological compatibility must be acessed. This book explores the design and requirements of biomaterials for the use in implantology.
Download or read book Bone Response to Dental Implant Materials written by Adriano Piattelli and published by Woodhead Publishing. This book was released on 2016-10-27 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bone Response to Dental Implant Materials examines the oral environment and the challenges associated with dental biomaterials. Understanding different in vivo and in vitro responses is essential for engineers to successfully design and tailor implant materials which will withstand the different challenges of this unique environment. This comprehensive book reviews the fundamentals of bone responses in a variety of implant materials and presents strategies to tailor and control them. - Presents a specific focus on the development and use of biomaterials in the oral environment - Discusses the basic science of the dental interface and its clinical applications - Contains important coverage on the monitoring and analysis of the dental implant interface
Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.
Download or read book Surface Engineering and Technology for Biomedical Implants written by Yoshiki Oshida and published by Momentum Press. This book was released on 2014-04-15 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book synthesizes a wide range of interdisciplinary literature to provide the state-of-the art of biomedical implants. It discusses materials and explains the three basic requirements for implant success from a surface engineering perspective: biological compatibility, biomechanical compatibility, morphological compatibility. Biomedical, mechanical, and materials engineers will find this book indispensable for understanding proper treatment of implant surfaces in order to achieve clinical success. Highlights include: • Coverage of surface engineering of polymer, metallic, ceramic and composite implant materials; • Coverage of chemical, mechanical, physical, thermal, and combined surface modification technologies; • Explanations of interfacial reaction between vital tissue and non-vital implant surface; and • Methodologies and technologies for modification of surface layer/zone to promote the osteo-integration, the ultimate success for biomedical implants in both dental and medical practice.
Download or read book Molecular and Translational Vascular Medicine written by Jonathon W. Homeister and published by Springer Science & Business Media. This book was released on 2012-06-28 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular and Translational Vascular Medicine will serve as a state-of-the-art resource for physicians and translational medical researchers alike who are interested in the rapidly evolving field of vascular medicine. The text provides new insight into the basic mechanisms of classic vascular pathophysiologic processes like angiogenesis, atherosclerosis, thrombosis, and vasculitis. Furthermore, it covers new areas of investigation including the role of the ubiquitin proteasome system in vascular disease, endothelial progenitor cells for disease treatment, and the genetic basis of thoracic aortic aneurysms. Lastly, this volume includes sections on the newly emerging field of therapeutic angiogenesis, and the developing technology of nanoparticle-based imaging and therapeutic treatment of the diseased vasculature. All chapters are written by established experts in their fields, including pathologists, cardiovascular surgeons, and internists as well as translational biomedical researchers in a wide range of disciplines. While comprehensive, the material is presented in a manner that simplifies the complex pathophysiologic mechanisms that underlie common vascular diseases. Molecular and Translational Vascular Medicine will be of great value to a broad audience including internists, cardiovascular and vascular surgeons, pathologists, residents and fellows, as well as translational biomedical researchers.
Download or read book Chemical Solution Deposition of Functional Oxide Thin Films written by Theodor Schneller and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first text to cover all aspects of solution processed functional oxide thin-films. Chemical Solution Deposition (CSD) comprises all solution based thin- film deposition techniques, which involve chemical reactions of precursors during the formation of the oxide films, i. e. sol-gel type routes, metallo-organic decomposition routes, hybrid routes, etc. While the development of sol-gel type processes for optical coatings on glass by silicon dioxide and titanium dioxide dates from the mid-20th century, the first CSD derived electronic oxide thin films, such as lead zirconate titanate, were prepared in the 1980’s. Since then CSD has emerged as a highly flexible and cost-effective technique for the fabrication of a very wide variety of functional oxide thin films. Application areas include, for example, integrated dielectric capacitors, ferroelectric random access memories, pyroelectric infrared detectors, piezoelectric micro-electromechanical systems, antireflective coatings, optical filters, conducting-, transparent conducting-, and superconducting layers, luminescent coatings, gas sensors, thin film solid-oxide fuel cells, and photoelectrocatalytic solar cells. In the appendix detailed “cooking recipes” for selected material systems are offered.
