Download or read book Soil Mechanics of Earthworks Foundations and Highway Engineering written by Bozzano G Luisa and published by Elsevier. This book was released on 2013-10-22 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third volume of a handbook which covers the whole field of soil mechanics, discussing deterministic and stochastic theories and methods, and showing how they can be used in conjunction with one another. The first volume discusses soil physics, while the second deals with the determination of physical characteristics of the soil. Australian Mining wrote of the Handbook ``a valuable addition to the extensive literature on the topic and will be found to be more useful than most.''The main objective of the third volume is to present solutions to the problems of engineering practice. It deals with the most important theoretical and practical problems of soil mechanics, discussing the following in detail: stability of earthworks, load-bearing capacity and settlement of shallow foundations, design of pile foundations, soil mechanics in road construction, improving the physical properties of soils, the characteristics of soil dynamics, foundations for machines and soil behaviour as affected by earthquakes. The book not only presents up-to-date deterministic methods, but also discusses solutions of probability theory in the fields of design and safety.The book is divided into six chapters covering the stability of slopes, landslides, load-bearing capacity and settlement of shallow foundations and pile foundations, soil mechanics in road construction, and the improvement of the physical characteristics of soil with special emphasis on machine foundations and earthquakes, giving detailed treatment of each subject. For example, the first chapter deals not only with the stability of slopes, but also discusses the natural and artificial effects, slope protection, filter design, stresses in embankments, and the time factor. In this way, the book gives a clear and comprehensive picture of the special fields of soil mechanics and its subjects. It is therefore emminently suitable for postgraduate engineers, and engineers working in the fields of geotechnics, earthworks, foundations, road construction, engineering geology and statistics, and the design of structures.
Download or read book Handbook of Soil Mechanics written by Arpád Kézdi and published by . This book was released on 1988 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Mechanics of Earthworks Foundations and Highway Engineering written by Arpad Kezdi and published by . This book was released on 1979 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Soil Mechanics Soil mechanics of earthworks foundations and highway engineering written by Árpád Kézdi and published by . This book was released on 1974 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Mechanics and Foundation Engineering written by Utsav Chandra Kalita and published by PHI Learning Pvt. Ltd.. This book was released on 2010-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for the undergraduate students of civil engineering, this textbook covers the theoretical aspects of soil mechanics and foundation engineering in a single volume. The text is organized in two parts--Part I (Soil mechanics) and Part II (Foundation engineering): Part I includes the basic properties and strength of soil, vertical and lateral pressures, discussion on earthen dam, sheet piles, and stability analysis for hill slope in connection with hill road construction. Part II discusses shallow and deep foundations, approaches of analysis of machine foundation, and various methods of determining the bearing capacity of soil. A separate chapter is devoted to on-site investigation. Besides the undergraduate students, this compendium will also be useful for students appearing for various competitive examinations such as GATE, IES and IAS. Consulting engineers in geotechnical engineering may also use this book as a reference. KEY FEATURES: Includes numerical problems (with solutions) in connection with construction of dams and highways in hilly region Figures and explanations to facilitate professionals and designers of machine foundation to solve the complex problem of stability analysis Objective-type questions to aid in UPSC examinations
Download or read book Soil Mechanics and Foundations written by Muniram Budhu and published by John Wiley and Sons. This book was released on 2010-12-21 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the principles that support the practice! With its simplicity in presentation, this text makes the difficult concepts of soil mechanics and foundations much easier to understand. The author explains basic concepts and fundamental principles in the context of basic mechanics, physics, and mathematics. From Practical Situations and Essential Points to Practical Examples, this text is packed with helpful hints and examples that make the material crystal clear.
Download or read book Soil Mechanics written by Graham Barnes and published by Bloomsbury Publishing. This book was released on 2017-09-16 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fourth edition, this popular textbook provides students with a clear understanding of the nature of soil and its behaviour, offering an insight into the application of principles to engineering solutions. It clearly relates theory to practice using a wide-range of case studies, and dozens of worked examples to show students how to tackle specific problems. A comprehensive companion website offers worked solutions to the exercises in the book, video interviews with practising engineers and a lecturer testbank. With its comprehensive coverage and accessible writing style, this book is ideal for students of all levels on courses in geotechnical engineering, civil engineering, highway engineering, environmental engineering and environmental management, and is also a handy guide for practitioners. New to this Edition: - Brand-new case studies from around the world, demonstrating real-life situations and solutions - Over 100 worked examples, giving an insight into how engineers tackle specific problems - A companion website providing an integrated series of video interviews with practising engineers - An extensive online testbank of questions for lecturers to use alongside the book
Download or read book Geotechnical Engineering written by Sayed Hemeda and published by BoD – Books on Demand. This book was released on 2020-07-15 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses contemporary issues related to soil mechanics and foundation engineering in earthworks, which are critical components in construction projects and often require detailed management techniques and unique solutions to address failures and implement remedial measures. The geotechnical engineering community continues to improve the classical testing techniques for measuring critical properties of soils and rocks, including stress wave-based non-destructive testing methods as well as methods used to improve shallow and deep foundation design. To minimize failure during construction, contemporary issues and related data may reveal useful lessons to improve project management and minimize economic losses. This book focuses on these aspects using appropriate methods in a rather simple manner. It also touches upon many interesting topics in soil mechanics and modern geotechnical engineering practice such as geotechnical earthquake engineering, principals in foundation design, slope stability analysis, modeling in geomechanics, offshore geotechnics, and geotechnical engineering perspective in the preservation of historical buildings and archeological sites. A total of seven chapters are included in the book.
Download or read book An Introduction to Soil Mechanics and Foundations written by C. R. Scott and published by Springer. This book was released on 2013-12-14 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is mainly intended to meet the needs of undergraduate students of Civil Engineering. In preparing the first edition of this book, I had two principal aims: firstly to provide the student with a description of soil behavior-and of the effects of the clay minerals and the soil water on such behavior-which was rather more detailed than is usual in an elementary text, and secondly to encourage him to look critically at the traditional methods of analysis and design. The latter point is important, since all such methods require certain simplifying assumptions without which no solution is generally possible. Serious errors in design are seldom the result of failure to understand the methods as such. They more usually arise from a failure to study and understand the geology of the site, or from attempts to apply analytical methods to problems for which the implicit assumptions make them unsuitable. In the design of foundations and earth structures, more than in most branches of engineering, the engineer must be continually exercising his judgment in making decisions. The analytical methods cannot relieve him of this responsibility but properly used, they should ensure that his judgment is based on sound knowledge and not on blind intuition. I hope that the book will prove to be of use to students when their courses are over, and help to bridge the awkward gap between theory and practice.
Download or read book Craig s Soil Mechanics written by Jonathan Knappett and published by CRC Press. This book was released on 2019-10-11 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Craig’s Soil Mechanics continues to evolve and remain the definitive text for civil engineering students worldwide. It covers fundamental soil mechanics and its application in applied geotechnical engineering from A to Z and at the right depth for an undergraduate civil engineer, with sufficient extension material for supporting MSc level courses, and with practical examples and digital tools to make it a useful reference work for practising engineers. This new edition now includes: Restructured chapters on foundations and earthworks, the latter including new material on working platforms and collapse of underground cavities (sinkhole formation). New mobilised-stress-based deformation methods that can straightforwardly be used with both linear and non-linear soil stiffness models and field measurements of shear wave velocity, for serviceability limit state design. Extended sets of correlations for making sensible first estimates of soil parameters, adding deformation-based parameters for broader coverage than the Eighth Edition. Extended section on robust statistical selection of characteristic soil parameters. Greater use of consolidation theory throughout in determining whether actions, processes and laboratory/in-situ tests are drained or undrained. Extended chapter on in-situ testing, adding the Flat Dilatometer Test (DMT), and interpretation of consolidation parameters from CPTU and DMT testing. An updated section on pile load testing. Additional worked examples and end-of-chapter problems covering new material, with fully worked solutions for lecturers. The electronic resources on the book’s companion website are developed further, with the addition of two new spreadsheet numerical analysis tools and improvement of existing tools from the Eighth Edition. Using these, readers can take real soil test data, interpret its mechanical properties and apply these to a range of common geotechnical design problems at ultimate and serviceability limiting states.
Download or read book Geotechnical Engineering written by V.N.S. Murthy and published by CRC Press. This book was released on 2002-10-25 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.
Download or read book Soil Mechanics Fundamentals written by Muni Budhu and published by John Wiley & Sons. This book was released on 2015-04-16 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible, clear and concise textbook strikes a balance between theory and practical applications for an introductory course in soil mechanics for undergraduates in civil engineering, construction, mining and geological engineering. Soil Mechanics Fundamentals lays a solid foundation on key principles of soil mechanics for application in later engineering courses as well as in engineering practice. With this textbook, students will learn how to conduct a site investigation, acquire an understanding of the physical and mechanical properties of soils and methods of determining them, and apply the knowledge gained to analyse and design earthworks, simple foundations, retaining walls and slopes. The author discusses and demonstrates contemporary ideas and methods of interpreting the physical and mechanical properties of soils for both fundamental knowledge and for practical applications. The chapter presentation and content is informed by modern theories of how students learn: Learning objectives inform students what knowledge and skills they are expected to gain from the chapter. Definitions of Key Terms are given which students may not have encountered previously, or may have been understood in a different context. Key Point summaries throughout emphasize the most important points in the material just read. Practical Examples give students an opportunity to see how the prior and current principles are integrated to solve ‘real world’ problems.
Download or read book Soil Mechanics Fundamentals written by Isao Ishibashi and published by CRC Press. This book was released on 2010-12-14 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many introductory texts on soil mechanics are available, most are either lacking in their explanations of soil behavior or provide far too much information without cogent organization. More significantly, few of those texts go beyond memorization of equations and numbers to provide a practical understanding of why and how soil mechanics work. Based on the authors’ more than 25 years of teaching soil mechanics to engineering students, Soil Mechanics Fundamentals presents a comprehensive introduction to soil mechanics, with emphasis on the engineering significance of what soil is, how it behaves, and why it behaves that way. Concise, yet thorough, the text is organized incrementally, with earlier sections serving as the foundation for more advanced topics. Explaining the varied behavior of soils through mathematics, physics and chemistry, the text covers: Engineering behavior of clays Unified and AASHTO soil classification systems Compaction techniques, water flow and effective stress Stress increments in soil mass and settlement problems Mohr’s Circle application to soil mechanics and shear strength Lateral earth pressure and bearing capacity theories Each chapter is accompanied by example and practicing problems that encourage readers to apply learned concepts to applications with a full understanding of soil behavior fundamentals. With this text, engineering professionals as well as students can confidently determine logical and innovative solutions to challenging situations.
Download or read book An Introduction to the Mechanics of Soils and Foundations written by John Atkinson and published by McGraw-Hill Companies. This book was released on 1993 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the undergraduate course in geotechnical engineering for civil engineers, this work sets out the basic theories of soil mechanics in a clear, simple way, combining both classical and critical state theories. By using short, focused chapters, the author ensures an accessible text while maintaining a continuous thread running through the book as theory develops into application. The treatment of soil mechanics is essentially theoretical but it is not highly mathematical and soil behaviour is represented by relatively simple equations with clearly defined parameters. The theory is supported by worked examples and simple experimental demonstrations.
Download or read book Soil Mechanics written by William Powrie and published by CRC Press. This book was released on 2002-06-01 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to encourage students to develop an understanding of the fundamentals of soil mechanics. It builds a robust and adaptable framework of ideas to support and accommodate the more complex problems and analytical procedures that confront the practising geotechnical engineer. Soil Mechanics: Concepts and Applications covers the soil mechanics and geotechnical engineering topics typically included in university courses in civil engineering and related subjects. Physical rather than mathematical arguments are used in the core sections wherever possible. New features for the second edition include: an accompanying website containing the lecturers solutions manual; a revised chapter on soil strength and soil behaviour separating the basic and more advanced material to aid understanding; a major new section on shallow foundations subject to combined vertical, horizontal and moment loading; revisions to the material on retaining walls, foundations and filter design to account for new research findings and bring it into line with the design philosophy espoused by EC7. More than 50 worked examples including case histories Learning objectives, key points and example questions
Download or read book The Mechanics of Soils and Foundations written by John Atkinson and published by CRC Press. This book was released on 2017-12-21 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal for undergraduates of geotechnical engineering for civil engineers, this established textbook sets out the basic theories of soil mechanics in a clear and straightforward way; combining both classical and critical state theories and giving students a good grounding in the subject which will last right through into a career as a geotechnical engineer. The subject is broken down into discrete topics which are presented in a series of short, focused chapters with clear and accessible text that develops from the purely theoretical to discussing practical applications. Soil behaviour is described by relatively simple equations with clear parameters while a number of worked examples and simple experimental demonstrations are included to illustrate the principles involved and aid reader understanding.
Download or read book Earthworks written by N. A. Trenter and published by Thomas Telford. This book was released on 2001 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing can be built without some excavation and transfer of soil (or rock) from one part of a site to another and this makes earthworks the most common product of civil engineering operations. Although normally seen as major structures, such as earth fill dams or large highways or railway embankments, the majority of earthworks are connected with minor civil works and building construction. Whatever the type of work, the principles are the same. Earthworks: a guide accumulates information on topics that are essential to earthworks engineering.
