Download or read book Soil Mechanics in Foundation Engineering Properties of soils and site investigations written by Zenon Wiłun and published by John Wiley & Sons. This book was released on 1972 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundation Engineering for Expansive Soils written by John D. Nelson and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your guide to the design and construction of foundations on expansive soils Foundation Engineering for Expansive Soils fills a significant gap in the current literature by presenting coverage of the design and construction of foundations for expansive soils. Written by an expert author team with nearly 70 years of combined industry experience, this important new work is the only modern guide to the subject, describing proven methods for identifying and analyzing expansive soils and developing foundation designs appropriate for specific locations. Expansive soils are found worldwide and are the leading cause of damage to structural roads. The primary problem that arises with regard to expansive soils is that deformations are significantly greater than in non-expansive soils and the size and direction of the deformations are difficult to predict. Now, Foundation Engineering for Expansive Soils gives engineers and contractors coverage of this subject from a design perspective, rather than a theoretical one. Plus, they'll have access to case studies covering the design and construction of foundations on expansive salts from both commercial and residential projects. Provides a succinct introduction to the basics of expansive soils and their threats Includes information on both shallow and deep foundation design Profiles soil remediation techniques, backed-up with numerous case studies Covers the most commonly used laboratory tests and site investigation techniques used for establishing the physical properties of expansive soils If you're a practicing civil engineer, geotechnical engineer or contractor, geologist, structural engineer, or an upper-level undergraduate or graduate student of one of these disciplines, Foundation Engineering for Expansive Soils is a must-have addition to your library of resources.

Download or read book Soil Mechanics and Foundation Engineering written by Utsav Chandra Kalita and published by PHI Learning Pvt. Ltd.. This book was released on 2010-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for the undergraduate students of civil engineering, this textbook covers the theoretical aspects of soil mechanics and foundation engineering in a single volume. The text is organized in two parts--Part I (Soil mechanics) and Part II (Foundation engineering): Part I includes the basic properties and strength of soil, vertical and lateral pressures, discussion on earthen dam, sheet piles, and stability analysis for hill slope in connection with hill road construction. Part II discusses shallow and deep foundations, approaches of analysis of machine foundation, and various methods of determining the bearing capacity of soil. A separate chapter is devoted to on-site investigation. Besides the undergraduate students, this compendium will also be useful for students appearing for various competitive examinations such as GATE, IES and IAS. Consulting engineers in geotechnical engineering may also use this book as a reference. KEY FEATURES: Includes numerical problems (with solutions) in connection with construction of dams and highways in hilly region Figures and explanations to facilitate professionals and designers of machine foundation to solve the complex problem of stability analysis Objective-type questions to aid in UPSC examinations

Download or read book Soil Mechanics and Foundation Engineering Fundamentals and Applications written by Nagaratnam Sivakugan and published by McGraw Hill Professional. This book was released on 2021-07-16 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the basics of soil mechanics and foundation engineering This hands-on guide shows, step by step, how soil mechanics principles can be applied to solve geotechnical and foundation engineering problems. Presented in a straightforward, engaging style by an experienced PE, Soil Mechanics and Foundation Engineering: Fundamentals and Applications starts with the basics, assuming no prior knowledge, and gradually proceeds to more advanced topics. You will get rich illustrations, worked-out examples, and real-world case studies that help you absorb the critical points in a short time. Coverage includes: Phase relations Soil classification Compaction Effective stresses Permeability and seepage Vertical stresses under loaded areas Consolidation Shear strength Lateral earth pressures Site investigation Shallow and deep foundations Earth retaining structures Slope stability Reliability-based design

Download or read book Measurement of Engineering Properties of Soils written by E. S. Reddy and published by New Age International. This book was released on 2002 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Highlights The Procedures For 30 Tests Used To Measure The Engineering Properties Of Soil In Both Laboratory And Field Including Dynamic Testing Of Soils. All The Test Procedures Are Based On Indian Standard Practice And Are Very Close To Astm Standards. Features Of This Book Include: * Test Procedures And Tabular Forms For A Maximum Number Of Field And Laboratory Tests. * Classification Of The Soil Tests Based On Type Of Project And Type Of Soil. * A Set Of Questions Is Presented At The End Of Each Chapter For Self Examination. * For Each Test, Theoretical Principles And The Precautions To Be Followed During The Test Are Explained.This Book Will Be Useful To B.Tech./B.E. (Civil Engineering) And M.E./ M.Tech. (Geotechnical Engineering) Students As Laboratory Manual And Reference Book. It Is Hoped That This Book Will Also Be Useful To Field Engineers As Handbook In Soil Mechanics As It Helps In Deciding The Test Programme For A Given Project. Similarly, The Book Will Be Helpful For Quality Control Engineers.

Download or read book Soil Mechanics and Foundation Engineering written by and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Engineering written by V.N.S. Murthy and published by CRC Press. This book was released on 2002-10-25 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.

Download or read book Geotechnical Investigations and Improvement of Ground Conditions written by Anjan Patel and published by Woodhead Publishing. This book was released on 2019-02-15 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Investigation and Improvement of Ground Conditions covers practical information on ground improvement and site investigation, considering rock properties and engineering geology and its relation to construction. The book covers geotechnical investigation for construction projects, including classic case studies with geotechnical significance. Additional sections cover soil compaction, soil stabilization, drainage and dewatering, grouting methods, the stone column method, geotextiles, fabrics and earth reinforcement, miscellaneous methods and tools for ground improvement, geotechnical investigation for construction projects, and forensic geotechnical engineering. Final sections present a series of site-specific case studies. Dedicated to ground improvement techniques and geotechnical site investigation Provides practical guidance on site-specific geotechnical investigation and the subsequent interpretation of data Presents site-specific case studies with geotechnical significance Includes site investigation of soils and rocks Gives field-oriented information and guidance

Download or read book Geotechnical Engineering Applied Soil Mechanics and Foundation Engineering Volume 1 written by Cyrus Aryani and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Soils are the most common and complex type of construction material. Virtually all structures are either built with soil (e.g., earth dams and embankments), in soil (e.g., tunnels and underground storage facilities), or on soil (e.g., building foundations and roads). Soil conditions and load combinations are unique to each site. To be able to predict soil behavior under the anticipated loading conditions, the mechanics of soils should be well understood, and their specific properties evaluated. The project design should also take into consideration the environmental, social, and economic factors. The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 1 contains chapters 1 through 7, which provides the user with a practical guide on the fundamentals of soil mechanics, including: Natural Soil Deposits, Soil Composition and Properties, Soil Improvement, Soil Water, Soil Stresses, Soil Compressibility and Settlement, and Shear Strength of Soil. Example problems follow the topic they cover. Several practice problems are included at the end of each chapter with the answers provided. It also contains the necessary forms, tables, and graphing papers for the state-of-the-practice laboratory experiments in soil mechanics.

Download or read book Practical Foundation Engineering Handbook written by Robert Wade Brown and published by McGraw Hill Professional. This book was released on 2001 with total page 1235 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the emphasis on visual aspects by including numerous charts, tables, and illustrations, this handbook presents practical information on oil and foundation engineering. A distinguished team of engineers takes the reader step by step through site development, soil mechanics, and foundation design analysis and construction techniques. New material is added on grouting foundation repair, forensic investigations, and residential and light construction procedures. 750 illus.

Download or read book Soil Mechanics Vol 1 written by Pile Buck and published by Lulu.com. This book was released on 2012-09-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent handbook combines four technical manuals covering Site Investigations, Laboratory Testing of Soils and basic Soils Engineering applicable to the Planning, Design and Construction of Pile Foundations and other major Civil Structures. Our manual reviews the various methods of conducting site investigations and laboratory and field testing, preliminary to project design. Covering the basics of soils identification procedures and goes on to settlement behavior, seepage, slope stability and other important subjects. Detailing some more difficult technical subjects including seismic activity and vibrations to some of the modern solutions for soils stabilization such as vibro-flotation and cement or chemical grouting methods.

Download or read book Soil Properties and their Correlations written by Michael Carter and published by John Wiley & Sons. This book was released on 2016-09-26 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential guide to improving preliminary geotechnical analysis and design from limited data Soil Properties and their Correlations, Second Edition provides a summary of commonly-used soil engineering properties and gives a wide range of correlations between the various properties, presented in the context of how they will be used in geotechnical design. The book is divided into 11 chapters: Commonly-measured properties; Grading and plasticity; Density; Permeability, Consolidation and settlement; Shear strength; California bearing ratio; Shrinkage and swelling characteristics; Frost susceptibility; Susceptibility to combustion; and Soil-structure interfaces. In addition, there are two appendices: Soil classification systems; and Sampling methods. This new, more comprehensive, edition provides material that would be of practical assistance to those faced with the problem of having to estimate soil behaviour from little or no laboratory test data. Key features: Soil properties explained in practical terms. A large number of correlations between different soil properties. A valuable aid for assessing design values of properties. Clear statements on practical limitations and accuracy. An invaluable source of reference for experienced professionals working on geotechnical design, it will also give students and early-career engineers an in-depth appreciation of the appropriate use of each property and the pitfalls to avoid.

Download or read book Fundamentals of Foundation Engineering written by Chang-Yu Ou and published by CRC Press. This book was released on 2023-09-18 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to introduce the principle and design of various foundations, covering shallow foundations, mat foundations, earth retaining structures, excavations, pile foundations, and slope stability. Since the analysis and design of a foundation are based on the soil properties under short-term (undrained) or long-term (drained) conditions, the assessment of soil properties from the geotechnical site investigation and the concept of drained or undrained soil properties are discussed in the first two chapters. Foundation elements transfer various load combinations from the superstructure to the underlying soils or rocks. The load transfer mechanisms, vertical stress or earth pressure distributions, and failure modes of each foundation type are clearly explained in this book. After understanding the soil responses subjected to the loadings from the foundation, the design methods, required factors of safety, and improvement measures for each foundation type are elaborated. This book presents both theoretical explication and practical applications for readers to easily comprehend the theoretical background, design methods, and practical applications and considerations. Each chapter provides relevant exercise examples and a problem set for self-practice. The analysis methods introduced in the book can be applied in actual analysis and design as they contain the most up-to-date knowledge of foundation design. This book is suitable for teachers and students to use in foundation engineering courses and engineers who are engaged in foundation design to create a technically sound, construction-feasible, and economical design of the foundation system.

Download or read book Soil Mechanics and Geotechnical Engineering written by D.L. Shah and published by CRC Press. This book was released on 2003-01-01 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with the fundamentals and general principles of soil mechanics and geotechnical engineering, this text also examines the design methodology of shallow / deep foundations, including machine foundations. In addition to this, the volume explores earthen embankments and retaining structures, including an investigation into ground improvement techniques, such as geotextiles, reinforced earth, and more

Download or read book Craig s Soil Mechanics written by Jonathan Knappett and published by CRC Press. This book was released on 2019-10-11 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Craig’s Soil Mechanics continues to evolve and remain the definitive text for civil engineering students worldwide. It covers fundamental soil mechanics and its application in applied geotechnical engineering from A to Z and at the right depth for an undergraduate civil engineer, with sufficient extension material for supporting MSc level courses, and with practical examples and digital tools to make it a useful reference work for practising engineers. This new edition now includes: Restructured chapters on foundations and earthworks, the latter including new material on working platforms and collapse of underground cavities (sinkhole formation). New mobilised-stress-based deformation methods that can straightforwardly be used with both linear and non-linear soil stiffness models and field measurements of shear wave velocity, for serviceability limit state design. Extended sets of correlations for making sensible first estimates of soil parameters, adding deformation-based parameters for broader coverage than the Eighth Edition. Extended section on robust statistical selection of characteristic soil parameters. Greater use of consolidation theory throughout in determining whether actions, processes and laboratory/in-situ tests are drained or undrained. Extended chapter on in-situ testing, adding the Flat Dilatometer Test (DMT), and interpretation of consolidation parameters from CPTU and DMT testing. An updated section on pile load testing. Additional worked examples and end-of-chapter problems covering new material, with fully worked solutions for lecturers. The electronic resources on the book’s companion website are developed further, with the addition of two new spreadsheet numerical analysis tools and improvement of existing tools from the Eighth Edition. Using these, readers can take real soil test data, interpret its mechanical properties and apply these to a range of common geotechnical design problems at ultimate and serviceability limiting states.

Download or read book Geotechnical Engineering Investigation Handbook written by Roy E. Hunt and published by CRC Press. This book was released on 2005-04-12 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Geotechnical Engineering Investigation Handbook provides the tools necessary for fusing geological characterization and investigation with critical analysis for obtaining engineering design criteria. The second edition updates this pioneering reference for the 21st century, including developments that have occurred in the twen

Download or read book Foundations on Expansive Soils written by Fu Hua Chen and published by Elsevier. This book was released on 2012-12-02 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foundations on Expansive Soils provides the practicing engineer with a summary of the state-of-the-art of expansive soils and practical solutions based on the author's experience. The book is organized into two parts. Part I deals with theory and practice, and summarizes some of the theoretical physical properties of expansive soils. It also discusses various techniques employed to found structures on expansive soils such as drilled pier foundation, mat foundation, moisture control, soil replacement, and chemical stabilization. Topics covered include the origin, mineralogical composition, and the basic structure of expansive soils; the migration of water, swelling potential, and swelling pressure; site investigations and laboratory testing; moisture control; and soil stabilization. Part II presents case studies on the following: distress caused by pier uplift; distress caused by the improper design and construction of a drilled pier foundation system; distress caused by heaving of footing pad and floor slab; distress caused by heaving of continuous footings; and distress caused by a rise of ground water.