Download or read book Consolidation Analyses of Soils written by Jian-Hua Yin and published by CRC Press. This book was released on 2020-12-28 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: When stresses are applied to saturated soil, deformation will occur as water in voids is squeezed out. Consolidation Analyses of Soils focuses on the consolidation of fully saturated soils. The book follows a classic approach by beginning with one-dimensional constitutive relations of soils and one-dimensional consolidation. It then moves on to analytical solutions to several one-dimensional consolidation problems and one-dimensional finite strain consolidation. The authors also present a finite element method for consolidation analysis of one-dimensional problems, analytical solutions to consolidation of soil with vertical drains, and a finite difference method for consolidation analysis of one-dimensional problems. Simplified methods for consolidation analysis of soils exhibiting creep are introduced and applied to different cases. Three-dimensional consolidation equations and solutions of typical three-dimensional consolidation problems are covered, as well as simplified finite element consolidation analysis of soils with vertical drain and finite element method for three-dimensional consolidation problems. The book is unique in that it covers both classic solutions and state-of-the-art work in consolidation analyses of soils. Authors Jian-Hua Yin is Chair Professor of Soil Mechanics in the Department of Civil and Environmental Engineering at The Hong Kong Polytechnic University. Guofu Zhu is a Professor in the Department of Engineering Structures and Mechanics at Wuhan University of Technology, China.
Download or read book Soil Consolidation Analysis written by Jian-Hua Yin and published by CRC Press. This book was released on 2014-01-22 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an unusual format that covers classic solutions and state-of-the-art work in consolidation analysis, this book focuses on the consolidation of fully saturated soils. It follows a classical approach by beginning with one-dimensional constitutive relations of soils and one-dimensional consolidation, then moving on to analytical solutions to several one-dimensional consolidation problems, and one-dimensional finite strain consolidation. It applies the finite element method for consolidation analysis of one-dimensional problems, and moves on to consolidation of soil with vertical drains and finite difference consolidation analysis of one-dimensional problems.
Download or read book Analysis and Prediction of Soil Behaviour written by T. S. Nagaraj and published by Taylor & Francis. This book was released on 1994 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Brings Out The Possibilities Of Generalizations Of Behaviour Of Soils And Hence Of Predicting The Required Engineering Properties Without Elaborate Testing. We Recognize That A Single Approach Cannot Be Evolved For All Soil Types And Hence The Necessity For Classifying Soils Into Different Categories And To Use Appropriate Model For Each. First Of All, Based On Mechanism Of Stress Transfer And Interaction Between The Phases, Two Obvious Classes, The Fine Grained And Coarse-Grained Soils Have Been Differentiated.The Discussions Bring Out That Because Of Identical Mode Of Stress Transfer, The Mechanical Behaviour I.E., Compressibility, Shear Strength Relations, Permeability Variations Etc. Can Be Generalized For All Fine Grained Soils, Enabling The Prediction Of Behaviour Of Such Soils With Just The Knowledge Of Certain State And Index Properties. The Sequence Of Discussion Is On The Characterization Of Specific Soil States And Prediction Of Proportion Starting From The Ideal Saturated Uncemented Soils, Both Normally And Over Consolidated, Cemented Saturated Soils And Partly Saturated Soils.In Dealing With The Behaviour Of Coarse Grained Soils, The Importance Of Microfabric And The Difficulties In Possible Generalizations Are Discussed. Perhaps The Unique Feature Of This Book Is That The Division Of The Chapters Is Based On Different Soil States, All The Mechanical Behaviours Being Discussed Under Each Soil State.The Book Will Be Of Interest To Both Academicians And Practising Engineers, Researchers And Postgraduate Students. It Would Serve As A Textbook For Undergraduate Students With Prior Knowledge Of Basic Soil Mechanics.
Download or read book Advances in Geotechnical Engineering written by National Research Council (U.S.). Transportation Research Board and published by Transportation Research Board National Research. This book was released on 1992 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Mechanics in Engineering Practice written by Karl Terzaghi and published by Wharton Press. This book was released on 2010-11 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the definitive handbook to soil mechanics, covering in great detail such topics as: Properties of Soils, Hydraulic and Mechanical Properties of Soils, Drainage of Soils, Plastic Equilibrium in Soils, Earth Stability and Pressure of Slopes, Foundations, etc. A valuable compendium for those interested in soil mechanics, this antiquarian text contains a wealth of information still very much valuable to engineers today. Karl von Terzaghi (1883 1963) was a Czech geologist and Civil engineer, hailed as the "father of soil mechanics." This book has been elected for republication due to its educational value and is proudly republished here with an introductory biography of the author."
Download or read book Soil Properties and their Correlations written by Michael Carter and published by John Wiley & Sons. This book was released on 2016-07-20 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential guide to improving preliminary geotechnical analysis and design from limited data Soil Properties and their Correlations, Second Edition provides a summary of commonly-used soil engineering properties and gives a wide range of correlations between the various properties, presented in the context of how they will be used in geotechnical design. The book is divided into 11 chapters: Commonly-measured properties; Grading and plasticity; Density; Permeability, Consolidation and settlement; Shear strength; California bearing ratio; Shrinkage and swelling characteristics; Frost susceptibility; Susceptibility to combustion; and Soil-structure interfaces. In addition, there are two appendices: Soil classification systems; and Sampling methods. This new, more comprehensive, edition provides material that would be of practical assistance to those faced with the problem of having to estimate soil behaviour from little or no laboratory test data. Key features: Soil properties explained in practical terms. A large number of correlations between different soil properties. A valuable aid for assessing design values of properties. Clear statements on practical limitations and accuracy. An invaluable source of reference for experienced professionals working on geotechnical design, it will also give students and early-career engineers an in-depth appreciation of the appropriate use of each property and the pitfalls to avoid.
Download or read book Settlement Analysis written by American Society of Civil Engineers and published by American Society of Civil Engineers. This book was released on 1994 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents guidelines for calculation of vertical displacements and settlement of soil under shallow foundations. This manual also provides guidance for: tests to estimate secondary compression settlement; estimation of settlement for dynamic loads; calculation of soil movements in expansive soils; and calculation of settlement in collapsible soil.
Download or read book Technology and Practice in Geotechnical Engineering written by Adeyeri, Joseph B. and published by IGI Global. This book was released on 2014-09-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge surrounding the behavior of earth materials is important to a number of industries, including the mining and construction industries. Further research into the field of geotechnical engineering can assist in providing the tools necessary to analyze the condition and properties of the earth. Technology and Practice in Geotechnical Engineering brings together theory and practical application, thus offering a unified and thorough understanding of soil mechanics. Highlighting illustrative examples, technological applications, and theoretical and foundational concepts, this book is a crucial reference source for students, practitioners, contractors, architects, and builders interested in the functions and mechanics of sedimentary materials.
Download or read book Analysis of Consolidation of Earth and Rockfill Dams written by Ching S. Chang and published by . This book was released on 1977 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Mechanics Design written by United States. Army. Corps of Engineers and published by . This book was released on 1953 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Improvement written by Cholachat Rujikiatkamjorn and published by Elsevier. This book was released on 2005-11-07 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book of its kind, providing over thirty real-life case studies of ground improvement projects selected by the worlds top experts in ground improvement from around the globe. Volume 3 of the highly regarded Elsevier Geo-engineering book series coordinated by the Series Editor: Professor John A Hudson FREng. An extremely reader friendly chapter format. Discusses wider economical and environmental issues facing scientists in the ground improvement. Ground improvement has been both a science and art, with significant developments observed through ancient history. From the use of straw as blended infill with soils for additional strength during the ancient Roman civilizations, and the use of elephants for compaction of earth dams during the early Asian civilizations, the concepts of reinforced earth with geosynthetics, use of electrokinetics and thermal modifications of soils have come a long way. The use of large and stiff stone columns and subsequent sand drains in the past has now been replaced by quicker to install and more effective prefabricated vertical drains, which have also eliminated the need for more expensive soil improvement methods. The early selection and application of the most appropriate ground improvement techniques can improve considerably not only the design and performance of foundations and earth structures, including embankments, cut slopes, roads, railways and tailings dams, but also result in their cost-effectiveness. Ground improvement works have become increasingly challenging when more and more problematic soils and marginal land have to be utilized for infrastructure development. This edited compilation contains a collection of Chapters from invited experts in various areas of ground improvement, who have illustrated the basic concepts and the applications of different ground improvement techniques using real projects that they have been involved in. The case histories from many countries ranging from Asia, America, Australia and Europe are addressed.
Download or read book Computer Program for the One dimensional Analysis of the Rate of Consolidation of Multi layered Soils written by R. T. Murray and published by . This book was released on 1972 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Strength and Slope Stability written by J. Michael Duncan and published by John Wiley & Sons. This book was released on 2014-09-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.
Download or read book Limit Analysis and Rheological Approach in Soil Mechanics written by W. Olszak and published by Springer. This book was released on 2014-05-04 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Soil Mechanics Laboratory Testing written by Dante Fratta and published by CRC Press. This book was released on 2007-05-21 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: A step-by-step text on the basic tests performed in soil mechanics, Introduction to Soil Mechanics Laboratory Testing provides procedural aids and elucidates industry standards. It also covers how to properly present data and document results. Containing numerical examples and figures, the information presented is based on American Society f
Download or read book Soil Mechanics Through Project Based Learning written by Ivan Gratchev and published by CRC Press. This book was released on 2018-11-21 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The currently available soil mechanics textbooks explain theory and show some practical applications through solving abstract geotechnical problems. Unfortunately, they do not engage students in the learning process as students do not "experience" what they study. This book employs a more engaging project-based approach to learning, which partially simulates what practitioners do in real life. It focuses on practical aspects of soil mechanics and makes the subject "come alive" through introducing real world geotechnical problems that the reader will be required to solve. This book appeals to the new generations of students who would like to have a better idea of what to expect in their employment future. This book covers all significant topics in soil mechanics and slope stability analysis. Each section is followed by several review questions that will reinforce the reader’s knowledge and make the learning process more engaging. A few typical problems are also discussed at the end of chapters to help the reader develop problem-solving skills. Once the reader has sufficient knowledge of soil properties and mechanics, they will be offered to undertake a project-based assignment to scaffold their learning. The assignment consists of real field and laboratory data including boreholes and test results so that the reader can experience what geotechnical engineering practice is like, identify with it personally, and integrate it into their own knowledge base. In addition, some problems include open-ended questions, which will encourage the reader to exercise their judgement and develop practical skills. To foster the learning process, solutions to all questions are provided to ensure timely feedback.
Download or read book Applied Soil Mechanics with ABAQUS Applications written by Sam Helwany and published by John Wiley & Sons. This book was released on 2007-03-16 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: A simplified approach to applying the Finite Element Method to geotechnical problems Predicting soil behavior by constitutive equations that are based on experimental findings and embodied in numerical methods, such as the finite element method, is a significant aspect of soil mechanics. Engineers are able to solve a wide range of geotechnical engineering problems, especially inherently complex ones that resist traditional analysis. Applied Soil Mechanics with ABAQUS® Applications provides civil engineering students and practitioners with a simple, basic introduction to applying the finite element method to soil mechanics problems. Accessible to someone with little background in soil mechanics and finite element analysis, Applied Soil Mechanics with ABAQUS® Applications explains the basic concepts of soil mechanics and then prepares the reader for solving geotechnical engineering problems using both traditional engineering solutions and the more versatile, finite element solutions. Topics covered include: Properties of Soil Elasticity and Plasticity Stresses in Soil Consolidation Shear Strength of Soil Shallow Foundations Lateral Earth Pressure and Retaining Walls Piles and Pile Groups Seepage Taking a unique approach, the author describes the general soil mechanics for each topic, shows traditional applications of these principles with longhand solutions, and then presents finite element solutions for the same applications, comparing both. The book is prepared with ABAQUS® software applications to enable a range of readers to experiment firsthand with the principles described in the book (the software application files are available under "student resources" at www.wiley.com/college/helwany). By presenting both the traditional solutions alongside the FEM solutions, Applied Soil Mechanics with ABAQUS® Applications is an ideal introduction to traditional soil mechanics and a guide to alternative solutions and emergent methods. Dr. Helwany also has an online course based on the book available at www.geomilwaukee.com.
