Download or read book Software User s Manual for Stability and Transition Analysis with the Codes LSH and PSH written by and published by . This book was released on 1993 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual describes how to use the local linear stability code LSH and the nonlinear Parabolized Stability Equations (PSE) solver PSH for compressible flows. Both codes are adaptable to analysis of different flows over fairly general shapes of bodies. For analysis of a new problem, the user may specify the basic state, the coordinate system, dependent disturbance variables and their boundary conditions to be used for the stability analysis through physics insert files. Once these preliminary steps are completed, different tasks of stability analysis and PSE calculations can be carried out by simple modifications of a few input files. Both codes are highly modular and closely integrated. Output data from LSH can be used directly as initial data for PSH runs. Examples of several insert files and input files of the built-in problems are given to assist the user in setting up a new problem. Linear stability equations, General bodies parabolized stability equations, Compressible flows.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Langley Stability and Transition Analysis Code Lastrac Version 1 2 User Manual written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-15 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: LASTRAC is a general-purposed, physics-based transition prediction code released by NASA for Laminar Flow Control studies and transition research. The design and development of the LASTRAC code is aimed at providing an engineering tool that is easy to use and yet capable of dealing with a broad range of transition related issues. It was written from scratch based on the state-of-the-art numerical methods for stability analysis and modern software technologies. At low fidelity, it allows users to perform linear stability analysis and N-factor transition correlation for a broad range of flow regimes and configurations by using either the linear stability theory or linear parabolized stability equations method. At high fidelity, users may use nonlinear PSE to track finite-amplitude disturbances until the skin friction rise. This document describes the governing equations, numerical methods, code development, detailed description of input/output parameters, and case studies for the current release of LASTRAC. Chang, Chau-Lyan Langley Research Center WU 23-762-45-ME
Download or read book Government Reports Annual Index written by and published by . This book was released on 1994 with total page 1748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1994 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Data Science Design Manual written by Steven S. Skiena and published by Springer. This book was released on 2017-07-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging and clearly written textbook/reference provides a must-have introduction to the rapidly emerging interdisciplinary field of data science. It focuses on the principles fundamental to becoming a good data scientist and the key skills needed to build systems for collecting, analyzing, and interpreting data. The Data Science Design Manual is a source of practical insights that highlights what really matters in analyzing data, and provides an intuitive understanding of how these core concepts can be used. The book does not emphasize any particular programming language or suite of data-analysis tools, focusing instead on high-level discussion of important design principles. This easy-to-read text ideally serves the needs of undergraduate and early graduate students embarking on an “Introduction to Data Science” course. It reveals how this discipline sits at the intersection of statistics, computer science, and machine learning, with a distinct heft and character of its own. Practitioners in these and related fields will find this book perfect for self-study as well. Additional learning tools: Contains “War Stories,” offering perspectives on how data science applies in the real world Includes “Homework Problems,” providing a wide range of exercises and projects for self-study Provides a complete set of lecture slides and online video lectures at www.data-manual.com Provides “Take-Home Lessons,” emphasizing the big-picture concepts to learn from each chapter Recommends exciting “Kaggle Challenges” from the online platform Kaggle Highlights “False Starts,” revealing the subtle reasons why certain approaches fail Offers examples taken from the data science television show “The Quant Shop” (www.quant-shop.com)
Download or read book Software Configuration Management written by IBM Redbooks and published by . This book was released on 2004 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM Redbook describes configuration management in general and how it is implemented in the Rational products ClearCase and ClearQuest. The target audience for this redbook is anyone considering a software configuration management (SCM) solution, and in particular, project managers and configuration management leaders responsible for medium and large UCM deployments. In Part 1 we introduce the general concept of software configuration management (SCM), and why software asset and lifecycle management is good business. We describe an SCM strategy that leads to the ClearCase and ClearQuest products. In Part 2 we provide the details for planning and implementing SCM using a ClearCase environment, focusing on the test environment, network, servers, and clients. In Part 3 we introduce ClearQuest, its terminology, the roles and responsibilities of the different types of users, and the infrastructure required for a UCM environment. We also provide the details for planning and implementing ClearQuest. In Part 4 we introduce unified change management (UCM) using ClearCase UCM and ClearQuest, including design considerations for an effective UCM implementation, and how UCM is used to manage complexity by raising the level of abstraction. In Part 5 we describe how to do parallel development in multiple geographical locations using ClearCase and ClearQuest MultiSite, including detailed procedures for planning and implementing MultiSite for a UCM environment.
Download or read book Real Time Microcomputer Control of Industrial Processes written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.
Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 2002-06-01 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides practical guidance for the design and operation of soil vapor extraction (SVE) and bioventing (BV) systems. It is intended for use by engineers, geologists, hydrogeologists, and soil scientists, chemists, project managers, and others who possess a technical education and some design experience but only the broadest familiarity with SVE or BV systems.
Download or read book Malware Detection written by Mihai Christodorescu and published by Springer Science & Business Media. This book was released on 2007-03-06 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the state of the art research in the area of malicious code detection, prevention and mitigation. It contains cutting-edge behavior-based techniques to analyze and detect obfuscated malware. The book analyzes current trends in malware activity online, including botnets and malicious code for profit, and it proposes effective models for detection and prevention of attacks using. Furthermore, the book introduces novel techniques for creating services that protect their own integrity and safety, plus the data they manage.
Download or read book DayWater written by Daniel R. Thevenot and published by IWA Publishing. This book was released on 2008-03-15 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European DayWater project has developed a prototype of an Adaptive Decision Support System (ADSS) related to urban stormwater pollution source control. The DayWater ADSS greatly facilitates decision-making for stormwater source control, which is currently impeded by the large number of stakeholders involved and by the necessary multidisciplinary knowledge. This book presents the results of this project, providing new insights into both technical and management issues. The main objectives of its technical chapters are pollution source control modelling, risk and impact assessment, and evaluation and comparison of best management practices. It also covers management aspects, such as the analysis of the decision-making processes in stormwater source control, at a European scale, and stormwater management strategies in general. The combination of scientific-technical and socio-managerial knowledge, with the strong cooperation of numerous end-users, reflects the innovative character of this book which includes actual applications of the ADSS prototype in significant case studies. DayWater: an Adaptive Decision Support System for Urban Stormwater Management contains 26 chapters collectively prepared by DayWater scientific partners and end-users associated with this European Research and Development project. It includes: A general presentation of the DayWater Adaptive Decision Support System (ADSS) structure and operation modes A detailed description of the major components of this ADSS prototype The assessment of its components in significant case studies in France, Germany and Sweden The proceedings of the International Conference on Decision Support Systems for Integrated Urban Water Management, held in Paris on 3-4 November 2005. The book presents the ADSS prototype including a combination of freely accessible on-line databases, guidance documents, “road maps” and modelling or multi-criteria analysis tools. As demonstrated in several significant case studies the challenge for stormwater managers is to make the benefits of urban stormwater management visible to society, resulting in active co-operation of a diversity of stakeholders. Only then, will sustainable management succeed. DayWater: an Adaptive Decision Support System for Urban Stormwater Management advances this cause of sustainable urban management through Urban stormwater management, and makes achievable (by means of risk and vulnerability tools which are included) the goal of integrated urban water management (IUWM).
Download or read book Advances in Communication and Computational Technology written by Gurdeep Singh Hura and published by Springer Nature. This book was released on 2020-08-13 with total page 1498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality peer-reviewed papers from the International Conference on Advanced Communication and Computational Technology (ICACCT) 2019 held at the National Institute of Technology, Kurukshetra, India. The contents are broadly divided into four parts: (i) Advanced Computing, (ii) Communication and Networking, (iii) VLSI and Embedded Systems, and (iv) Optimization Techniques.The major focus is on emerging computing technologies and their applications in the domain of communication and networking. The book will prove useful for engineers and researchers working on physical, data link and transport layers of communication protocols. Also, this will be useful for industry professionals interested in manufacturing of communication devices, modems, routers etc. with enhanced computational and data handling capacities.
Download or read book Operation and Maintenance Manual for Electrostatic Precipitators written by and published by . This book was released on 1985 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neural Networks and Statistical Learning written by Ke-Lin Du and published by Springer Science & Business Media. This book was released on 2013-12-09 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a broad but in-depth introduction to neural network and machine learning in a statistical framework, this book provides a single, comprehensive resource for study and further research. All the major popular neural network models and statistical learning approaches are covered with examples and exercises in every chapter to develop a practical working understanding of the content. Each of the twenty-five chapters includes state-of-the-art descriptions and important research results on the respective topics. The broad coverage includes the multilayer perceptron, the Hopfield network, associative memory models, clustering models and algorithms, the radial basis function network, recurrent neural networks, principal component analysis, nonnegative matrix factorization, independent component analysis, discriminant analysis, support vector machines, kernel methods, reinforcement learning, probabilistic and Bayesian networks, data fusion and ensemble learning, fuzzy sets and logic, neurofuzzy models, hardware implementations, and some machine learning topics. Applications to biometric/bioinformatics and data mining are also included. Focusing on the prominent accomplishments and their practical aspects, academic and technical staff, graduate students and researchers will find that this provides a solid foundation and encompassing reference for the fields of neural networks, pattern recognition, signal processing, machine learning, computational intelligence, and data mining.
Download or read book Seals and Sealing Handbook written by Ronald Horace Warring and published by . This book was released on 1981 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of International Conference on Intelligent Computing Information and Control Systems written by A. Pasumpon Pandian and published by Springer Nature. This book was released on 2021-01-24 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers presented at the International Conference on Intelligent Computing, Information and Control Systems (ICICCS 2020). It encompasses various research works that help to develop and advance the next-generation intelligent computing and control systems. The book integrates the computational intelligence and intelligent control systems to provide a powerful methodology for a wide range of data analytics issues in industries and societal applications. The book also presents the new algorithms and methodologies for promoting advances in common intelligent computing and control methodologies including evolutionary computation, artificial life, virtual infrastructures, fuzzy logic, artificial immune systems, neural networks and various neuro-hybrid methodologies. This book is pragmatic for researchers, academicians and students dealing with mathematically intransigent problems.
Download or read book Remote Sensing written by John R. Schott and published by Oxford University Press. This book was released on 2007-05-25 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remote Sensing deals with the fundamental ideas underlying the rapidly growing field of remote sensing. John Schott explores energy-matter interaction, radiation propagation, data dissemination, and described the tools and procedures required to extract information from remotely sensed data using the image chain approach. Organizations and individuals often focus on one aspect of the remote sensing process before considering it as a whole, thus investigating unjustified effort, time, and expense to get minimal improvement. Unlike other books on the subject, Remote Sensing treats the process as a continuous flow. Schott examines the limitations obstructing the flow of information to the user, employing numerous applications of remote sensing to earth observation disciplines. For this second edition, in addition to a thorough update, there are major changes and additions, such as a much more complete treatment of spectroscopic imaging, which has matured dramatically in the last ten years, and a more rigorous treatment of image processing with an emphasis on spectral image processing algorithms. Remote Sensing is an ideal first text in remote sensing for advanced undergraduate and graduate students in the physical or engineering sciences, and will also serve as a valuable reference for practitioners.
