Download or read book Software Defined Radio for 3G written by Paul Burns and published by Artech House. This book was released on 2003 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you're a mobile communications engineer considering software radio solutions, this practical resource is essential reading. It covers systems design and partitioning all the way from the antenna to the management and control software. Various options for hardware are provided including a look at current and state of the art silicon technologies such as A/D & D/A's, DSP's, FPGA's, RCP's, ACM's & digital frequency up/down-converters.
Download or read book Software Defined Radio written by Walter H.W. Tuttlebee and published by John Wiley & Sons. This book was released on 2006-02-24 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impending advent of GSM in the early 1990s triggered massive investment that revolutionised the capability of DSP technology. A decade later, the vastly increased processing requirements and potential market of 3G has triggered a similar revolution, with a host of start-up companies claiming revolutionary technologies hoping to challenge and displace incumbent suppliers. This book, with contributions from today's major players and leading start-ups, comprehensively describes both the new approaches and the responses of the incumbents, with detailed descriptions of the design philosophy, architecture, technology maturity and software support. Analysis of SDR baseband processing requirements of cellular handsets and basestations 3G handset baseband - ASIC, DSP, parallel processing, ACM and customised programmable architectures 3G basestation baseband - DSP (including co-processors), FPGA-based approaches, reconfigurable and parallel architectures Architecture optimisation to match 3G air interface and application algorithms Evolution of existing DSP, ASIC & FPGA solutions Assessment of the architectural approaches and the implications of the trends. An essential resource for the 3G product designer, who needs to understand immediate design options within a wider context of future product roadmaps, the book will also benefit researchers and commercial managers who need to understand this rapid evolution of baseband signal processing and its industry impact.
Download or read book Software Defined Radio Using MATLAB Simulink and the RTL SDR written by Robert W Stewart and published by . This book was released on 2015-09-11 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The availability of the RTL-SDR device for less than $20 brings software defined radio (SDR) to the home and work desktops of EE students, professional engineers and the maker community. The RTL-SDR can be used to acquire and sample RF (radio frequency) signals transmitted in the frequency range 25MHz to 1.75GHz, and the MATLAB and Simulink environment can be used to develop receivers using first principles DSP (digital signal processing) algorithms. Signals that the RTL-SDR hardware can receive include: FM radio, UHF band signals, ISM signals, GSM, 3G and LTE mobile radio, GPS and satellite signals, and any that the reader can (legally) transmit of course! In this book we introduce readers to SDR methods by viewing and analysing downconverted RF signals in the time and frequency domains, and then provide extensive DSP enabled SDR design exercises which the reader can learn from. The hands-on SDR design examples begin with simple AM and FM receivers, and move on to the more challenging aspects of PHY layer DSP, where receive filter chains, real-time channelisers, and advanced concepts such as carrier synchronisers, digital PLL designs and QPSK timing and phase synchronisers are implemented. In the book we will also show how the RTL-SDR can be used with SDR transmitters to develop complete communication systems, capable of transmitting payloads such as simple text strings, images and audio across the lab desktop.
Download or read book Software Defined Radio Using MATLAB Simulink and the RTL SDR written by Robert W Stewart and published by . This book was released on 2015-09-11 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The availability of the RTL-SDR device for less than $20 brings software defined radio (SDR) to the home and work desktops of EE students, professional engineers and the maker community. The RTL-SDR can be used to acquire and sample RF (radio frequency) signals transmitted in the frequency range 25MHz to 1.75GHz, and the MATLAB and Simulink environment can be used to develop receivers using first principles DSP (digital signal processing) algorithms. Signals that the RTL-SDR hardware can receive include: FM radio, UHF band signals, ISM signals, GSM, 3G and LTE mobile radio, GPS and satellite signals, and any that the reader can (legally) transmit of course! In this book we introduce readers to SDR methods by viewing and analysing downconverted RF signals in the time and frequency domains, and then provide extensive DSP enabled SDR design exercises which the reader can learn from. The hands-on SDR design examples begin with simple AM and FM receivers, and move on to the more challenging aspects of PHY layer DSP, where receive filter chains, real-time channelisers, and advanced concepts such as carrier synchronisers, digital PLL designs and QPSK timing and phase synchronisers are implemented. In the book we will also show how the RTL-SDR can be used with SDR transmitters to develop complete communication systems, capable of transmitting payloads such as simple text strings, images and audio across the lab desktop.
Download or read book Software Defined Radio written by Markus Dillinger and published by John Wiley & Sons. This book was released on 2005-08-05 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software defined radio (SDR) is a hot topic in the telecommunications field, with regard to wireless technology. It is one of the most important topics of research in the area of mobile and personal communications. SDR is viewed as the enabler of global roaming and a platform for the introduction of new technologies and services into existing live networks. It therefore gives networks a greater flexibility into mobile communications. It bridges the inter-disciplinary gap in the field as SDR covers two areas of development, namely software development and digital signal processing and the internet. It extends well beyond the simple re-configuration of air interface parameters to cover the whole system from the network to service creation and application development. Reconfigurability entails the pervasive use of software reconfiguration, empowering upgrades or patching of any element of the network and of the services and applications running on it. It cuts across the types of bearer radio systems (Paging to cellular, wireless local area network to microwave, terrestrial to satellite, personal communications to broadcasting) enable the integration of many of today's disparate systems in the same hardware platform. Also it cuts across generation (second to third to fourth). This volume complements the already published volumes 1 and 2 of the Wiley Series in Software Radio. The book discusses the requirements for reconfigurability and then introduces network architectures and functions for reconfigurable terminals. Finally it deals with reconfiguration in the network. The book also provides a comprehensive view on reconfigurability in three very active research projects as CAST, MOBIVAS and TRUST/SCOUT. Key features include: Presents new research in wireless communications Summarises the results of an extensive research program on software defined radios in Europe Provides a comprehensive view on reconfigurability in three very active research projects as CAST (Configurable radio with Advanced Sodftware Technology), MOBIVAS (Downloadable MOBIle Value Added Services through Software Radio and Switching Integrated Platforms), TRUST (Transparently Re-configurable Ubiquitous Terminal) and SCOUT (Smart User-Centric Communciation Environment).
Download or read book Software Defined Radio written by Kevin Roebuck and published by Tebbo. This book was released on 2011-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A software-defined radio system, or SDR, is a radio communication system where components that have been typically implemented in hardware (e.g. mixers, filters, amplifiers, modulators/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded computing devices. While the concept of SDR is not new, the rapidly evolving capabilities of digital electronics render practical many processes which used to be only theoretically possible. A basic SDR system may consist of a personal computer equipped with a sound card, or other analog-to-digital converter, preceded by some form of RF front end. Significant amounts of signal processing are handed over to the general-purpose processor, rather than being done in special-purpose hardware. Such a design produces a radio which can receive and transmit widely different radio protocols (sometimes referred to as a waveforms) based solely on the sof tware used. Software radios have significant utility for the military and cell phone services, both of which must serve a wide variety of changing radio protocols in real time. In the long term, software-defined radios are expected by proponents like the SDRForum (now The Wireless Innovation Forum) to become the dominant technology in radio communications. SDRs, along with software defined antennas are the enablers of the cognitive radio. This book is your ultimate resource for Software-defined radio (SDR). Here you will find the most up-to-date information, analysis, background and everything you need to know. In easy to read chapters, with extensive references and links to get you to know all there is to know about Software-defined radio (SDR) right away, covering: Software-defined radio, 2G, 3G, 4G, Digital Enhanced Cordless Telecommunications, GNU Radio, HPSDR, List of software-defined radios, Orthogonal frequency-division multiplexing, Software GNSS Receiver, SpeakEasy, Universal Software Radio Peripheral, Multiplexing, Circuit switching, Time-division multiplexing, Frequency-division multiplexing, Multi-user MIMO, Polarization (waves), Spatial multiplexing, Statistical time division multiplexing, Packet switching, Time division multiple access, Frequency-hopping spread spectrum, Direct-sequence spread spectrum, Orthogonal frequency-division multiple access, Single-carrier FDMA, Multi-carrier code division multiple access, Channel access method, Media Access Control, Modulation, Amplitude modulation, Single-sideband modulation, Quadrature amplitude modulation, Frequency modulation, Phase modulation, Space modulation, Frequency-shift keying, Multiple frequency-shift keying, Amplitude-shift keying, On-off keying, Phase-shift keying, Minimum-shift keying, Continuous phase modulation, Pulse-position modulation, Trellis modulation, Spread spectrum, Chirp spread spectrum, Time-hopping, Demodulation, Modem, Line code, Pulse-amplitude modulation, Pulse-width modulation, Pulse-code modulation This book explains in-depth the real drivers and workings of Software-defined radio (SDR). It reduces the risk of your technology, time and resources investment decisions by enabling you to compare your understanding of Software-defined radio (SDR) with the objectivity of experienced professionals.
Download or read book Software Defined Radio written by Walter H.W. Tuttlebee and published by John Wiley & Sons. This book was released on 2002-06-24 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software defined radio (SDR) is one of the most important topics of research, and indeed development, in the area of mobile and personal communications. SDR is viewed as an enabler of global roaming and as a unique platform for the rapid introduction of new services into existing live networks. It therefore promises mobile communication networks a major increase in flexibility and capability. SDR brings together two key technologies of the last decade - digital radio and downloadable software. It encompasses not only reconfiguration of the air interface parameters of handset and basestation products but also the whole mobile network, to facilitate the dynamic introduction of new functionality and mass-customised applications to the user's terminal, post-purchase. This edited book, contributed by internationally respected researchers and industry practitioners, describes the current technological status of radio frequency design, data conversion, reconfigurable signal processing hardware, and software issues at all levels of the protocol stack and network. The book provides a holistic treatment of SDR addressing the full breadth of relevant technologies - radio frequency design, signal processing and software - at all levels. As such it provides a solid grounding for a new generation of wireless engineers for whom radio design in future will assume dynamic flexibility as a given. In particular it explores * The unique demands of SDR upon the RF subsystem and their implications for front end design methodologies * The recent concepts of the 'digital front end' and 'parametrization' * The role and key influence of data conversion technologies and devices within software radio, essential to robust product design * The evolution of signal processing technologies, describing new architectural approaches * Requirements and options for software download * Advances in 'soft' protocols and 'on-the-fly' software reconfiguration * Management of terminal reconfiguration and its network implications * The concepts of the waveform description language The book also includes coverage of * Potential breakthrough technologies, such as superconducting RSFQ technology and the possible future role of MEMS in RF circuitry * Competing approaches, eg all-software radios implemented on commodity computing vs advanced processing architectures that dynamically optimise their configuration to match the algorithm requirements at a point in time The book opens with an introductory chapter by Stephen Blust, Chair of the ITU-R WP8F Committee and Chair of the SDR Forum presenting a framework for SDR, in terms of definitions, evolutionary perspectives, introductory timescales and regulation. Suitable for today's engineers, technical staff and researchers within the wireless industry, the book will also appeal to marketing and commercial managers who need to understand the basics and potential of the technology for future product development. Its balance of industrial and academic contributors also makes it suitable as a text for graduate and post-graduate courses aiming to prepare the next generation of wireless engineers.
Download or read book Software Defined Radio written by Walter H.W. Tuttlebee and published by John Wiley & Sons. This book was released on 2003-04-11 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software defined radio (SDR) is one of the most important topics of research, and indeed development, in the area of mobile and personal communications. SDR is viewed as an enabler of global roaming and as a unique platform for the rapid introduction of new services into existing live networks. It therefore promises mobile communication networks a major increase in flexibility and capability. SDR brings together two key technologies of the last decade - digital radio and downloadable software. It encompasses not only reconfiguration of the air interface parameters of handset and basestation products but also the whole mobile network, to facilitate the dynamic introduction of new functionality and mass-customised applications to the user's terminal, post-purchase. This edited book, contributed by internationally respected researchers and industry practitioners, describes the current technological status of radio frequency design, data conversion, reconfigurable signal processing hardware, and software issues at all levels of the protocol stack and network. The book provides a holistic treatment of SDR addressing the full breadth of relevant technologies - radio frequency design, signal processing and software - at all levels. As such it provides a solid grounding for a new generation of wireless engineers for whom radio design in future will assume dynamic flexibility as a given. In particular it explores * The unique demands of SDR upon the RF subsystem and their implications for front end design methodologies * The recent concepts of the 'digital front end' and 'parametrization' * The role and key influence of data conversion technologies and devices within software radio, essential to robust product design * The evolution of signal processing technologies, describing new architectural approaches * Requirements and options for software download * Advances in 'soft' protocols and 'on-the-fly' software reconfiguration * Management of terminal reconfiguration and its network implications * The concepts of the waveform description language The book also includes coverage of * Potential breakthrough technologies, such as superconducting RSFQ technology and the possible future role of MEMS in RF circuitry * Competing approaches, eg all-software radios implemented on commodity computing vs advanced processing architectures that dynamically optimise their configuration to match the algorithm requirements at a point in time The book opens with an introductory chapter by Stephen Blust, Chair of the ITU-R WP8F Committee and Chair of the SDR Forum presenting a framework for SDR, in terms of definitions, evolutionary perspectives, introductory timescales and regulation. Suitable for today's engineers, technical staff and researchers within the wireless industry, the book will also appeal to marketing and commercial managers who need to understand the basics and potential of the technology for future product development. Its balance of industrial and academic contributors also makes it suitable as a text for graduate and post-graduate courses aiming to prepare the next generation of wireless engineers.
Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.
Download or read book Implementing Software Defined Radio written by Eugene Grayver and published by Springer Science & Business Media. This book was released on 2012-07-20 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Defined Radio makes wireless communications easier, more efficient, and more reliable. This book bridges the gap between academic research and practical implementation. When beginning a project, practicing engineers, technical managers, and graduate students can save countless hours by considering the concepts presented in these pages. The author covers the myriad options and trade-offs available when selecting an appropriate hardware architecture. As demonstrated here, the choice between hardware- and software-centric architecture can mean the difference between meeting an aggressive schedule and bogging down in endless design iterations. Because of the author’s experience overseeing dozens of failed and successful developments, he is able to present many real-life examples. Some of the key concepts covered are: Choosing the right architecture for the market – laboratory, military, or commercial, Hardware platforms – FPGAs, GPPs, specialized and hybrid devices, Standardization efforts to ensure interoperability and portabilitym State-of-the-art components for radio frequency, mixed-signal, and baseband processing. The text requires only minimal knowledge of wireless communications; whenever possible, qualitative arguments are used instead of equations. An appendix provides a quick overview of wireless communications and introduces most of the concepts the readers will need to take advantage of the material. An essential introduction to SDR, this book is sure to be an invaluable addition to any technical bookshelf.
Download or read book Software Defined Radio written by Moise Nathan Solomon and published by . This book was released on 2002 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Software Defined Radio written by Walter H.W. Tuttlebee and published by John Wiley & Sons. This book was released on 2002-03-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few years software radio has transitioned from an esoteric academic idea to a rapidly commercialising technology that in the coming decade will revolutionise the mobile telecommunications marketplace. Written for industry professionals in engineering and commercial roles, as well as those in academia and research, this book will provide a comprehensive context for all those already active in or entering the field. Walter Tuttlebee, himself a pioneer of software radio in Europe, has gathered contributions from many of the acknowledged world experts in software radio -leaders operating at the heart of the software radio world today - who share their experience and insight into the background, the present and the future evolution of the technology and the industry. Contributions from North America, Europe and Asia ensure a comprehensive overview of the global SDR scene. The structured approach ensures that the book comprehensively addresses the key issues in the title - the origins of software radio, what has been (and is) driving its commercialisation and what is happening on the international scene The book includes: a comprehensive review of the origins of software radio in the defence industry an insider's view of the origins, evolution, role and activities of the SDR Forum a summary of the MIT Sloan study into the drivers of global success in the mobile wireless marketplace a review of end user and mobile network operator perspectives of software radio and what the value it can offer insiders' summaries of recent SDR research activities in Europe and Japan coverage of the regulatory issues associated with SDR and the current approaches being taken in North America and Europe, with contributions from the regulators themselves a description of the first steps to SDR standards - the ETSI MExE standard descriptions of some of the first commercial software defined radio products, for both defence and commercial applications Endorsed with a foreword from Joseph Mitola III, 'the father of software radio'
Download or read book Multi Mode Multi Band RF Transceivers for Wireless Communications written by Gernot Hueber and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes cutting-edge physical layer technologies for multi-mode wireless RF transceivers. Includes original contributions from distinguished researchers and professionals. Covers cutting-edge physical layer technologies for multi-mode wireless RF transceivers. Contributors are all leading researchers and professionals in this field.
Download or read book Software Radio written by Jeffrey Hugh Reed and published by Prentice Hall Professional. This book was released on 2002 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to radio engineering covers every technique DSP and RF engineers need to build software radios for a wide variety of wireless systems using DSP techniques. Included are practical guidelines for choosing DSP microprocessors, and systematic, object-oriented software design techniques.
Download or read book Software Defined Radio Theory and Practice written by John M. Reyland and published by Artech House. This book was released on 2023-11-30 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Defined Radio: Theory and Practice is a comprehensive resource covering software defined radio (SDR) from theory to practical applications. The book provides foundational knowledge for communication engineers and SDR enthusiasts. It covers digital modulation techniques, from basic to advanced techniques such as SC-OFDM and GMSK. The book then discusses RF channel impairments and strategies for eliminating them along with the use of channel equalization and modern frequency domain equalizers utilized in cellular telephony. Source and channel coding are introduced, and receiver analog design is thoroughly researched, comparing traditional and modern designs. The book includes important review topics such as complex numbers, fixed-point numeric formats, decision theory, Doppler, and more. Software Defined Radio: Theory and Practice offers a well-rounded approach to understanding and applying SDR, combining theoretical knowledge with practical exercises and simulations for a comprehensive learning experience.
Download or read book Green Software Defined Radios written by Liesbet Van der Perre and published by Springer Science & Business Media. This book was released on 2008-12-21 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Software De?ned Radios, the title of this book may have originated from a lackofinspiration,andthecombinationofhardwork,jetlag,anddrinkinggreentea. The message we want to convey however, is that SDRs are a promising technology for the future, providing they are designed for ef?cient usage of scarce resources: energy and spectrum. In the last years, the R&D teams focusing on wireless c- munication (around the world and at IMEC speci?cally), have realized great bre- throughs. It is our honor, building on this knowledge, to bring a comprehensive overview of the essential technologies. We are grateful that Springer is willing to publish in their collection on radio technologies, a book on green SDRs, a weird species still today, yet maybe the baseline for the day after tomorrow. Dear reader, we wish that you ?nd in the following pages, including the references, some int- esting insights, and that this book may live more or less up to your expectations (and hopefully more than less). Thisbook’sclosingstatesthatthequestforGreenSDRshasnotended,thisisjust the beginning. Concerning this book however, we are happy that today the opposite is true. We want to acknowledge our colleagues at IMEC for their great scienti?c contribution, and even more for the enjoyable cooperation.
Download or read book Third Generation Mobile Telecommunication Systems written by Peter Stavroulakis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: One hundred years ago, the notion of transmitting information without the use of wires must have seemed like magic. In 1896, the first patent for wireless communication was granted to Marchese Guglielmo Marconi. Since then the field of wireless communications which includes cellular systems has taken various forms of development. It basically evolved through three Eras. The Pioneer Era over the period of 1860-1921, the Precellular Era over 1921-1980 and the Cellular Era after 1980 and beyond. The first generation cellular era started with the Analog Systems and evolved in the digital domain utilizing Time Division Multiple Access (TDMA) and Code Division Multiple Access (CDMA), thus comprising the Second Generation Mobile Systems. The first generation RF cellular communications systems deployed in the early to mid 1980's had air interfaces comprised of analog technology. Among them were AMPS (Advanced Mobile Phone System), NMT (Nordic Mobile Telephone), and TACS (Total Access Communications System). These were designed for use in a specific geographic area and not intended to be deployed in other areas. There was not much commonality beyond using the same air interface technology and same modulation. The air interface technology was Frequency Division Multiple Access (FDMA) and the modulation was analog FM, but with different deviations and channel spacings. The frequency bands, air interface protocols, number of channels, and data rates were different. In general, these systems provided local and national coverage.
