Download or read book Software Defect and Operational Profile Modeling written by Kai-Yuan Cai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: also in: THE KLUWER INTERNATIONAL SERIES ON ASIAN STUDIES IN COMPUTER AND INFORMATION SCIENCE, Volume 1
Download or read book Stochastic Reliability and Maintenance Modeling written by Tadashi Dohi and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: In honor of the work of Professor Shunji Osaki, Stochastic Reliability and Maintenance Modeling provides a comprehensive study of the legacy of and ongoing research in stochastic reliability and maintenance modeling. Including associated application areas such as dependable computing, performance evaluation, software engineering, communication engineering, distinguished researchers review and build on the contributions over the last four decades by Professor Shunji Osaki. Fundamental yet significant research results are presented and discussed clearly alongside new ideas and topics on stochastic reliability and maintenance modeling to inspire future research. Across 15 chapters readers gain the knowledge and understanding to apply reliability and maintenance theory to computer and communication systems. Stochastic Reliability and Maintenance Modeling is ideal for graduate students and researchers in reliability engineering, and workers, managers and engineers engaged in computer, maintenance and management works.
Download or read book Domain Modeling Based Software Engineering written by Ruqian Lu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many approaches have been proposed to enhance software productivity and reliability. These approaches typically fall into three categories: the engineering approach, the formal approach, and the knowledge-based approach. The optimal gain in software productivity cannot be obtained if one relies on only one of these approaches. Thus, the integration of different approaches has also become a major area of research. No approach can be said to be perfect if it fails to satisfy the following two criteria. Firstly, a good approach should support the full life cycle of software development. Secondly, a good approach should support the development of large-scale software for real use in many application domains. Such an approach can be referred to as a five-in-one approach. The authors of this book have, for the past eight years, conducted research in knowledge-based software engineering, of which the final goal is to develop a paradigm for software engineering which not only integrates the three approaches mentioned above, but also fulfils the two criteria on which the five-in-one approach is based. Domain Modeling- Based Software Engineering: A Formal Approach explores the results of this research. Domain Modeling-Based Software Engineering: A Formal Approach will be useful to researchers of knowledge-based software engineering, students and instructors of computer science, and software engineers who are working on large-scale projects of software development and want to use knowledge-based development methods in their work.
Download or read book Early Software Reliability Prediction written by Ajeet Kumar Pandey and published by Springer. This book was released on 2013-07-12 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of software system with acceptable level of reliability and quality within available time frame and budget becomes a challenging objective. This objective could be achieved to some extent through early prediction of number of faults present in the software, which reduces the cost of development as it provides an opportunity to make early corrections during development process. The book presents an early software reliability prediction model that will help to grow the reliability of the software systems by monitoring it in each development phase, i.e. from requirement phase to testing phase. Different approaches are discussed in this book to tackle this challenging issue. An important approach presented in this book is a model to classify the modules into two categories (a) fault-prone and (b) not fault-prone. The methods presented in this book for assessing expected number of faults present in the software, assessing expected number of faults present at the end of each phase and classification of software modules in fault-prone or no fault-prone category are easy to understand, develop and use for any practitioner. The practitioners are expected to gain more information about their development process and product reliability, which can help to optimize the resources used.
Download or read book Advances in Software Engineering written by Dominik Ślęzak and published by Springer. This book was released on 2009-11-18 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: As future generation information technology (FGIT) becomes specialized and fr- mented, it is easy to lose sight that many topics in FGIT have common threads and, because of this, advances in one discipline may be transmitted to others. Presentation of recent results obtained in different disciplines encourages this interchange for the advancement of FGIT as a whole. Of particular interest are hybrid solutions that c- bine ideas taken from multiple disciplines in order to achieve something more signi- cant than the sum of the individual parts. Through such hybrid philosophy, a new principle can be discovered, which has the propensity to propagate throughout mul- faceted disciplines. FGIT 2009 was the first mega-conference that attempted to follow the above idea of hybridization in FGIT in a form of multiple events related to particular disciplines of IT, conducted by separate scientific committees, but coordinated in order to expose the most important contributions. It included the following international conferences: Advanced Software Engineering and Its Applications (ASEA), Bio-Science and Bio- Technology (BSBT), Control and Automation (CA), Database Theory and Appli- tion (DTA), Disaster Recovery and Business Continuity (DRBC; published indepe- ently), Future Generation Communication and Networking (FGCN) that was c- bined with Advanced Communication and Networking (ACN), Grid and Distributed Computing (GDC), Multimedia, Computer Graphics and Broadcasting (MulGraB), Security Technology (SecTech), Signal Processing, Image Processing and Pattern Recognition (SIP), and u- and e-Service, Science and Technology (UNESST).
Download or read book Product Focused Software Process Improvement written by Frank Bomarius and published by Springer. This book was released on 2004-02-02 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second International Conference on Product Focused Software Process Improvement, PROFES 2000, held in Oulu, Finland, in June 2000.The 30 revised full papers presented were carefully reviewed and selected from a total of 60 submitted full papers. The book is divided into topical sections on process improvement, empirical software engineering, industrial experiences, methods and tools, software process and modeling, software and process measurement, and organizational learning and experience factory.
Download or read book Computational Intelligence in Reliability Engineering written by Gregory Levitin and published by Springer Science & Business Media. This book was released on 2006-10-25 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes chapters presenting applications of different metaheuristics in reliability engineering, including ant colony optimization, great deluge algorithm, cross-entropy method and particle swarm optimization. It also presents chapters devoted to cellular automata and support vector machines, and applications of artificial neural networks, a powerful adaptive technique that can be used for learning, prediction and optimization. Several chapters describe aspects of imprecise reliability and applications of fuzzy and vague set theory.
Download or read book Fuzzy Logic and Soft Computing written by Guoqing Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy Logic and Soft Computing contains contributions from world-leading experts from both the academic and industrial communities. The first part of the volume consists of invited papers by international authors describing possibilistic logic in decision analysis, fuzzy dynamic programming in optimization, linguistic modifiers for word computation, and theoretical treatments and applications of fuzzy reasoning. The second part is composed of eleven contributions from Chinese authors focusing on some of the key issues in the fields: stable adaptive fuzzy control systems, partial evaluations and fuzzy reasoning, fuzzy wavelet neural networks, analysis and applications of genetic algorithms, partial repeatability, rough set reduction for data enriching, limits of agents in process calculus, medium logic and its evolution, and factor spaces canes. These contributions are not only theoretically sound and well-formulated, but are also coupled with applicability implications and/or implementation treatments. The domains of applications realized or implied are: decision analysis, word computation, databases and knowledge discovery, power systems, control systems, and multi-destinational routing. Furthermore, the articles contain materials that are an outgrowth of recently conducted research, addressing fundamental and important issues of fuzzy logic and soft computing.
Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.
Download or read book Reliability Modeling With Computer And Maintenance Applications written by Nakamura Syouji and published by #N/A. This book was released on 2017-06-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of Reliability and Maintenance theory and applications has become major concerns of engineers and managers engaged in order to design and product systems that are highly reliable. This book aims to cover the ongoing research topics in computer system, reliability analysis, reliability applications and maintenance policies, so as to provide awareness for those who engage systems design, being students, technicians, or research engineers, as a reference guidebook.
Download or read book The Extended Operational Profile Model for Usage based Software Testing microform written by Mechelle S. Gittens and published by Library and Archives Canada = Bibliothèque et Archives Canada. This book was released on 2004 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design for Reliability written by Eric Bauer and published by John Wiley & Sons. This book was released on 2011-02-11 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: System reliability, availability and robustness are often not well understood by system architects, engineers and developers. They often don't understand what drives customer's availability expectations, how to frame verifiable availability/robustness requirements, how to manage and budget availability/robustness, how to methodically architect and design systems that meet robustness requirements, and so on. The book takes a very pragmatic approach of framing reliability and robustness as a functional aspect of a system so that architects, designers, developers and testers can address it as a concrete, functional attribute of a system, rather than an abstract, non-functional notion.
Download or read book Informatics Networking and Intelligent Computing written by Jiaxing Zhang and published by CRC Press. This book was released on 2015-05-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains selected papers presented at the 2014 International Conference on Informatics, Networking and Intelligent Computing, held in Shenzhen, China. Contributions cover the latest developments and advances in the field of Informatics, Networking and Intelligent Computing.
Download or read book Multi Criteria Decision Models in Software Reliability written by Ashish Mishra and published by CRC Press. This book was released on 2022-11-30 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides insights into contemporary issues and challenges in multi-criteria decision models. It is a useful guide for identifying, understanding and categorising multi-criteria decision models, and ultimately implementing the analysis for effective decision-making. The use of multi-criteria decision models in software reliability engineering is a relatively new field of study, and this book collects all the latest methodologies, tools and techniques in one single volume. It covers model selection, assessment, resource allocation, release management, up-grade planning, open-source systems, bug tracking system management and defect prediction. Multi-Criteria Decision Models in Software Reliability: Methods and Applications will cater to researchers, academicians, post-graduate students, software developers, software reliability engineers and IT managers.
Download or read book Simple Statistical Methods for Software Engineering written by C. Ravindranath Pandian and published by CRC Press. This book was released on 2015-05-21 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there are countless books on statistics, few are dedicated to the application of statistical methods to software engineering. Simple Statistical Methods for Software Engineering: Data and Patterns fills that void. Instead of delving into overly complex statistics, the book details simpler solutions that are just as effective and connect wi
Download or read book An Integrated Approach to Software Engineering written by Pankaj Jalote and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to software engineering with the emphasis on a case study approach in which a project is developed through the course of the book illustrating the different activities of software development. The sequence of chapters is essentially the same as the sequence of activities performed during a typical software project. Similarly, the author carefully introduces appropriate metrics for controlling and assessing the software process. Intended for students who have had no previous training in software engineering, this book is suitable for a one semester course.
Download or read book Reliability Growth written by Panel on Reliability Growth Methods for Defense Systems and published by National Academy Press. This book was released on 2015-03-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A high percentage of defense systems fail to meet their reliability requirements. This is a serious problem for the U.S. Department of Defense (DOD), as well as the nation. Those systems are not only less likely to successfully carry out their intended missions, but they also could endanger the lives of the operators. Furthermore, reliability failures discovered after deployment can result in costly and strategic delays and the need for expensive redesign, which often limits the tactical situations in which the system can be used. Finally, systems that fail to meet their reliability requirements are much more likely to need additional scheduled and unscheduled maintenance and to need more spare parts and possibly replacement systems, all of which can substantially increase the life-cycle costs of a system. Beginning in 2008, DOD undertook a concerted effort to raise the priority of reliability through greater use of design for reliability techniques, reliability growth testing, and formal reliability growth modeling, by both the contractors and DOD units. To this end, handbooks, guidances, and formal memoranda were revised or newly issued to reduce the frequency of reliability deficiencies for defense systems in operational testing and the effects of those deficiencies. "Reliability Growth" evaluates these recent changes and, more generally, assesses how current DOD principles and practices could be modified to increase the likelihood that defense systems will satisfy their reliability requirements. This report examines changes to the reliability requirements for proposed systems; defines modern design and testing for reliability; discusses the contractor's role in reliability testing; and summarizes the current state of formal reliability growth modeling. The recommendations of "Reliability Growth" will improve the reliability of defense systems and protect the health of the valuable personnel who operate them.
