Download or read book Software Configuration Management Handbook Third Edition written by Alexis Leon and published by Artech House. This book was released on 2015-02-01 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software configuration management (SCM) is one of the scientific tools that is aimed to bring control to the software development process. This new resource is a complete guide to implementing, operating, and maintaining a successful SCM system for software development. Project managers, system designers, and software developers are presented with not only the basics of SCM, but also the different phases in the software development lifecycle and how SCM plays a role in each phase. The factors that should be considered and the pitfalls that should be avoided while designing the SCM system and SCM plan are also discussed. In addition, this third edition is updated to include cloud computing and on-demand systems. This book does not rely on one specific tool or standard for explaining the SCM concepts and techniques; In fact, it gives readers enough information about SCM, the mechanics of SCM, and SCM implementation, so that they can successfully implement a SCM system.
Download or read book Practical Software Configuration Management written by Tim Mikkelsen and published by Prentice Hall. This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basics of configuration management; An introduction to configuration management; Basic configuration management concepts; what next?; What tool do I use to get started?; Configuration management for the individual; Introduction to configuration management for the individual; Nightly development operations with RCS; Release operations; Maintenance operations; Beyond the basics; Choosing a tool for yourself; Recommendations for projects and problems; Next steps for the individual...; Configuration management for the team; Introduction to configuration management for the team; Getting the rest of the team involved with the process; Daily individual development operations with RCS; Daily team interactions; Group activities - pulling it all together; Group activities - getting something out the door again; Beyond the basics; Choosing a tool for your team; Recommendation for teams and team projects; Next steps for a team; Tools; What software is available for configuration management; Tool comparisons; Free, public domain, and shareware tools; Commercial tools; Appendices; Index.
Download or read book Software Configuration Management written by Wayne A. Babich and published by Addison-Wesley Longman. This book was released on 1986 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Configuration Management Metrics written by Frank B. Watts and published by William Andrew. This book was released on 2009-08-26 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Configuration Management Metrics: Product Lifecycle and Engineering Documentation Control Process Measurement and Improvement provides a comprehensive discussion of measurements for configuration management/product lifecycle processes. Each chapter outlines one of the most important measures of merit – the need for written policy and procedures. The best of the best practices as to the optimum standards are listed with an opportunity for the reader to check off those that their company has and those they do not. The book first defines the concept of configuration management (CM) and explains its importance. It then discusses the important metrics in the major CM and related processes. These include: new item release; order entry/fulfillment; request for change; bill of material change cost; and field change. Ancillary processes which may or may not be thought of as part of these major processes are also addressed, including deviations, service parts, publications and field failure reporting. - Provides detailed guidance on developing and implementing measurement systems and reports - Demonstrates methods of graphing and charting data, with benchmarks - A practical resource for the development of Engineering Documentation Control processes - Includes basic principles of Product Lifecycle processes and their measurement
Download or read book Engineering Documentation Control Handbook written by Frank B. Watts and published by William Andrew. This book was released on 2011-10-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frank B. Watts
Download or read book Software Configuration Management Patterns written by Steve Berczuk and published by Addison-Wesley Professional. This book was released on 2020-05-21 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stereotypes portray software engineers as a reckless lot, and stereotypes paint software configuration management (SCM) devotees as inflexible. Based on these impressions, it is no wonder that projects can be riddled with tension! The truth probably lies somewhere in between these stereotypes, and this book shows how proven SCM practices can foster a healthy team-oriented culture that produces better software. The authors show that workflow, when properly managed, can avert delays, morale problems, and cost overruns. A patterns approach (proven solutions to recurring problems) is outlined so that SCM can be easily applied and successfully leveraged in small to medium sized organizations. The patterns are presented with an emphasis on practicality. The results speak for themselves: improved processes and a motivated workforce that synergize to produce better quality software.
Download or read book Configuration Management for Senior Managers written by Frank B. Watts and published by Butterworth-Heinemann. This book was released on 2015-04-21 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Configuration Management for Senior Managers is written to help managers in product manufacturing and engineering environments identify the ways in which they can streamline their products and processes through proactive documentation control and product lifecycle management. Experienced consultant Frank Watts gives a practitioner’s view tailored to the needs of management, without the textbook theory that can be hard to translate into real-world change. Unlike competing books that focus on CM within software and IT environments, this engineering-focused resource is packed with examples and lessons learned from leading product development and manufacturing companies, making it easy to apply the approach to your business. Developed to help you identify key policies and practices needing attention in your organization to establish and maintain consistency of processes and products, and to reduce operational costs Focused on configuration management (CM) within manufacturing and engineering settings, with relevant examples from leading companies Written by an experienced consultant and practitioner with the knowledge to provide real-world insights and solutions, not just textbook theory
Download or read book The Software Project Manager s Handbook written by Dwayne Phillips and published by John Wiley & Sons. This book was released on 2004-07-01 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software project managers and their team members work individually towards a common goal. This book guides both, emphasizing basic principles that work at work. Software at work should be pleasant and productive, not just one or the other. This book emphasizes software project management at work. The author's unique approach concentrates on the concept that success on software projects has more to do with how people think individually and in groups than with programming. He summarizes past successful projects and why others failed. Visibility and communication are more important than SQL and C. The book discusses the technical and people aspects of software and how they relate to one another. The first part of the text discusses four themes: (1) people, process, product, (2) visibility, (3) configuration management, and (4) IEEE Standards. These themes stress thinking, organization, using what others have built, and people. The second part describes the software management principles of process, planning, and risk management. Part three discusses software engineering principles, the technical aspects of software projects. The fourth part examines software practices giving practical meaning to the individual topics covered in the preceding chapters. The final part of this book continues these practical aspects by illustrating a sample project through seven distinctive documents.
Download or read book Site Reliability Engineering written by Niall Richard Murphy and published by "O'Reilly Media, Inc.". This book was released on 2016-03-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overwhelming majority of a software system’s lifespan is spent in use, not in design or implementation. So, why does conventional wisdom insist that software engineers focus primarily on the design and development of large-scale computing systems? In this collection of essays and articles, key members of Google’s Site Reliability Team explain how and why their commitment to the entire lifecycle has enabled the company to successfully build, deploy, monitor, and maintain some of the largest software systems in the world. You’ll learn the principles and practices that enable Google engineers to make systems more scalable, reliable, and efficient—lessons directly applicable to your organization. This book is divided into four sections: Introduction—Learn what site reliability engineering is and why it differs from conventional IT industry practices Principles—Examine the patterns, behaviors, and areas of concern that influence the work of a site reliability engineer (SRE) Practices—Understand the theory and practice of an SRE’s day-to-day work: building and operating large distributed computing systems Management—Explore Google's best practices for training, communication, and meetings that your organization can use
Download or read book Configuration Management Best Practices written by Bob Aiello and published by Pearson Education. This book was released on 2010-08-10 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successfully Implement High-Value Configuration Management Processes in Any Development Environment As IT systems have grown increasingly complex and mission-critical, effective configuration management (CM) has become critical to an organization’s success. Using CM best practices, IT professionals can systematically manage change, avoiding unexpected problems introduced by changes to hardware, software, or networks. Now, today’s best CM practices have been gathered in one indispensable resource showing you how to implement them throughout any agile or traditional development organization. Configuration Management Best Practices is practical, easy to understand and apply, and fully reflects the day-to-day realities faced by practitioners. Bob Aiello and Leslie Sachs thoroughly address all six “pillars” of CM: source code management, build engineering, environment configuration, change control, release engineering, and deployment. They demonstrate how to implement CM in ways that support software and systems development, meet compliance rules such as SOX and SAS-70, anticipate emerging standards such as IEEE/ISO 12207, and integrate with modern frameworks such as ITIL, COBIT, and CMMI. Coverage includes Using CM to meet business objectives, contractual requirements, and compliance rules Enhancing quality and productivity through lean processes and “just-in-time” process improvement Getting off to a good start in organizations without effective CM Implementing a Core CM Best Practices Framework that supports the entire development lifecycle Mastering the “people” side of CM: rightsizing processes, overcoming resistance, and understanding workplace psychology Architecting applications to take full advantage of CM best practices Establishing effective IT controls and compliance Managing tradeoffs and costs and avoiding expensive pitfalls Configuration Management Best Practices is the essential resource for everyone concerned with CM: from CTOs and CIOs to development, QA, and project managers and software engineers to analysts, testers, and compliance professionals.
Download or read book Quality Software Project Management written by Robert T. Futrell and published by Prentice Hall Professional. This book was released on 2002 with total page 1690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is based on the "best practices" of the UT Software Quality Institute Software Project Management certificates program. Quality Software Project Management identifies and teaches 34 essential project management competencies project managers can use to minimize cost, risk, and time-to-market. Covers the entire project lifecycle: planning. initiation, monitoring/control, and closing. Illuminates its techniques with real-world software management case studies. Authors (leading practitioners) address the pillars of any successful software venture: process, project, and people. Endorsed by the Software Quality Institute.
Download or read book Software Architect s Handbook written by Joseph Ingeno and published by Packt Publishing Ltd. This book was released on 2018-08-30 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to exploring software architecture concepts and implementing best practices Key Features Enhance your skills to grow your career as a software architect Design efficient software architectures using patterns and best practices Learn how software architecture relates to an organization as well as software development methodology Book Description The Software Architect’s Handbook is a comprehensive guide to help developers, architects, and senior programmers advance their career in the software architecture domain. This book takes you through all the important concepts, right from design principles to different considerations at various stages of your career in software architecture. The book begins by covering the fundamentals, benefits, and purpose of software architecture. You will discover how software architecture relates to an organization, followed by identifying its significant quality attributes. Once you have covered the basics, you will explore design patterns, best practices, and paradigms for efficient software development. The book discusses which factors you need to consider for performance and security enhancements. You will learn to write documentation for your architectures and make appropriate decisions when considering DevOps. In addition to this, you will explore how to design legacy applications before understanding how to create software architectures that evolve as the market, business requirements, frameworks, tools, and best practices change over time. By the end of this book, you will not only have studied software architecture concepts but also built the soft skills necessary to grow in this field. What you will learn Design software architectures using patterns and best practices Explore the different considerations for designing software architecture Discover what it takes to continuously improve as a software architect Create loosely coupled systems that can support change Understand DevOps and how it affects software architecture Integrate, refactor, and re-architect legacy applications Who this book is for The Software Architect’s Handbook is for you if you are a software architect, chief technical officer (CTO), or senior developer looking to gain a firm grasp of software architecture.
Download or read book Guide to the Software Engineering Body of Knowledge Swebok r written by IEEE Computer Society and published by . This book was released on 2014 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the Guide to the Software Engineering Body of Knowledge (SWEBOK(R) Guide), the IEEE Computer Society establishes a baseline for the body of knowledge for the field of software engineering, and the work supports the Society's responsibility to promote the advancement of both theory and practice in this field. It should be noted that the Guide does not purport to define the body of knowledge but rather to serve as a compendium and guide to the knowledge that has been developing and evolving over the past four decades. Now in Version 3.0, the Guide's 15 knowledge areas summarize generally accepted topics and list references for detailed information. The editors for Version 3.0 of the SWEBOK(R) Guide are Pierre Bourque (Ecole de technologie superieure (ETS), Universite du Quebec) and Richard E. (Dick) Fairley (Software and Systems Engineering Associates (S2EA)).
Download or read book Software Engineering at Google written by Titus Winters and published by O'Reilly Media. This book was released on 2020-02-28 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, software engineers need to know not only how to program effectively but also how to develop proper engineering practices to make their codebase sustainable and healthy. This book emphasizes this difference between programming and software engineering. How can software engineers manage a living codebase that evolves and responds to changing requirements and demands over the length of its life? Based on their experience at Google, software engineers Titus Winters and Hyrum Wright, along with technical writer Tom Manshreck, present a candid and insightful look at how some of the world’s leading practitioners construct and maintain software. This book covers Google’s unique engineering culture, processes, and tools and how these aspects contribute to the effectiveness of an engineering organization. You’ll explore three fundamental principles that software organizations should keep in mind when designing, architecting, writing, and maintaining code: How time affects the sustainability of software and how to make your code resilient over time How scale affects the viability of software practices within an engineering organization What trade-offs a typical engineer needs to make when evaluating design and development decisions
Download or read book Configuration Management written by Jon M. Quigley and published by CRC Press. This book was released on 2015-04-16 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Configuration Management: Theory, Practice, and Application details a comprehensive approach to configuration management from a variety of product development perspectives, including embedded and IT. It provides authoritative advice on how to extend products for a variety of markets due to configuration options.The book also describes the importanc
Download or read book Software Engineering Handbook written by Jessica Keyes and published by CRC Press. This book was released on 2002-12-23 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfortunately, much of what has been written about software engineering comes from an academic perspective which does not always address the everyday concerns that software developers and managers face. With decreasing software budgets and increasing demands from users and senior management, technology directors need a complete guide to the subject
Download or read book Software Configuration Management written by IBM Redbooks and published by . This book was released on 2004 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM Redbook describes configuration management in general and how it is implemented in the Rational products ClearCase and ClearQuest. The target audience for this redbook is anyone considering a software configuration management (SCM) solution, and in particular, project managers and configuration management leaders responsible for medium and large UCM deployments. In Part 1 we introduce the general concept of software configuration management (SCM), and why software asset and lifecycle management is good business. We describe an SCM strategy that leads to the ClearCase and ClearQuest products. In Part 2 we provide the details for planning and implementing SCM using a ClearCase environment, focusing on the test environment, network, servers, and clients. In Part 3 we introduce ClearQuest, its terminology, the roles and responsibilities of the different types of users, and the infrastructure required for a UCM environment. We also provide the details for planning and implementing ClearQuest. In Part 4 we introduce unified change management (UCM) using ClearCase UCM and ClearQuest, including design considerations for an effective UCM implementation, and how UCM is used to manage complexity by raising the level of abstraction. In Part 5 we describe how to do parallel development in multiple geographical locations using ClearCase and ClearQuest MultiSite, including detailed procedures for planning and implementing MultiSite for a UCM environment.
