Download or read book Smart Systems Integration and Simulation written by Nicola Bombieri and published by Springer. This book was released on 2016-02-17 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book-presents new methods and tools for the integration and simulation of smart devices. The design approach described in this book explicitly accounts for integration of Smart Systems components and subsystems as a specific constraint. It includes methodologies and EDA tools to enable multi-disciplinary and multi-scale modeling and design, simulation of multi-domain systems, subsystems and components at all levels of abstraction, system integration and exploration for optimization of functional and non-functional metrics. By covering theoretical and practical aspects of smart device design, this book targets people who are working and studying on hardware/software modelling, component integration and simulation under different positions (system integrators, designers, developers, researchers, teachers, students etc.). In particular, it is a good introduction to people who have interest in managing heterogeneous components in an efficient and effective way on different domains and different abstraction levels. People active in smart device development can understand both the current status of practice and future research directions. · Provides a comprehensive overview of smart systems design, focusing on design challenges and cutting-edge solutions; · Enables development of a co-simulation and co-design environment that accounts for the peculiarities of the basic subsystems and components to be integrated; · Describes development of modeling and design techniques, methods and tools that enable multi-domain simulation and optimization at various levels of abstraction and across different technological domains.
Download or read book 2021 Smart Systems Integration SSI written by and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technological Innovation for Smart Systems written by Luis M. Camarinha-Matos and published by Springer. This book was released on 2017-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2017, held in Costa de Caparica, Portugal, in May 2017. The 46 revised full papers were carefully reviewed and selected from 95 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for smart systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks, computational intelligence, systems analysis, smart manufacturing systems, smart sensorial systems, embedded and real time systems, energy: management, energy: optimization, distributed infrastructure, solar energy, electrical machines, power electronics, and electronics.
Download or read book Modeling and Simulation of Smart Grid Integrated with Hybrid Renewable Energy Systems written by Mohamed Abdelaziz Mohamed and published by Springer. This book was released on 2017-08-03 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive definition of smart grids and their benefits, and compares smart and traditional grids. It also introduces a design methodology for stand-alone hybrid renewable energy system with and without applying the smart grid concepts for comparison purposes. It discusses using renewable energy power plants to feed loads in remote areas as well as in central power plants connected to electric utilities. Smart grid concepts used in the design of the hybrid renewable power systems can reduce the size of components, which can be translated to a reduction in the cost of generated energy. The proposed hybrid renewable energy system includes wind, photovoltaic, battery, and diesel, and is used initially to feed certain loads, covering the load required completely. The book introduces a novel methodology taking the smart grid concept into account by dividing the loads into high and low priority parts. The high priority part should be supplied at any generated conditions. However, the low priority loads can be shifted to the time when the generated energy from renewable energy sources is greater than the high priority loads requirements. The results show that the use of this smart grid concept reduces the component size and the cost of generated energy compared to that without dividing the loads. The book also describes the use of smart optimization techniques like particle swarm optimization (PSO) and genetic algorithm (GA) to optimally design the hybrid renewable energy system. This book provides an excellent background to renewable energy sources, optimal sizing and locating of hybrid renewable energy sources, the best optimization methodologies for sizing and designing the components of hybrid renewable energy systems, and offers insights into using smart grid concepts in the system’s design and sizing. It also helps readers understand the dispatch methodology and how to connect the system’s different components, their modeling, and the cost analysis of the system.
Download or read book Smart Systems Integration 2011 written by Thomas Geßner and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Industry 4 0 and SMART Systems written by Diego Galar Pascual and published by CRC Press. This book was released on 2019-09-16 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry 4.0 refers to fourth generation of industrial activity characterized by smart systems and internet-based solutions. This book describes the fourth revolution based on instrumented, interconnected and intelligent assets. The different book chapters provide a perspective on technologies and methodologies developed and deployed leading to this concept. With an aim to increase performance, productivity and flexibility, major application area of maintenance through smart system has been discussed in detail. Applicability of 4.0 in transportation, energy and infrastructure is explored, with effects on technology, organisation and operations from a systems perspective.
Download or read book MICRO AND SMART SYSTEMS written by G.K. Ananthasuresh and published by . This book was released on 2010-08-01 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Features: · All the authors of this book are stalwarts in their respective field and are key people in promoting the technology and subject.· This book emphasizes analytical and computational modeling. · It includes in-depth discussion of mechanics, coupled multi-physics, electronics, control, and scaling effects as well as finite element analysis. · Relating all of the above to particular examples of microelectromechanical systems (MEMS) and smart devices is a highlight of this book. · Complementing the modeling aspects, the book includes organized summaries of a variety of devices and systems, details of packaging and integration, and case-studies of representative devices. · Prior disciplinary background is not assumed in presenting the material.· Many worked-out examples, context-relevant problems within the chapters, and practice exercises are included in all chapters. It is thus suitable for self-study by practicing engineers and researchers in many disciplines.· Unavailability of a book that covers both micro and smart systems at the fundamental level.· Excellent pedagogy with:" 230+ Illustrations" 25 Tables" 100+ Exercise Questions" 45 Your Turn questions for students wanting to invest time in researching." About 50 Problems and Examples within chapters About The Book: This book essentially deals with the basics of microsystem technology and is intended principally as a textbook at the undergraduate level; however, it can also be used as background book at the postgraduate level. The book makes an effort to provide an introduction to smart materials and systems. The aim of this book is to present adequate modeling details so that readers can appreciate the analysis involved in microsystems (and to some extent, smart systems) and thereby enabling them to get an in-depth understanding about simulation and design. Therefore, the book will also be useful to practicing researchers in all branches of science and engineering, who might be interested in applications where they can use this technology. The book presents adequate details of modeling of microsystems as well as addresses their fabrication and integration.
Download or read book Intelligent Human Systems Integration 2019 written by Waldemar Karwowski and published by Springer. This book was released on 2019-01-05 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research on innovative human systems integration and human–machine interaction, with an emphasis on artificial intelligence and automation, as well as computational modeling and simulation. It covers a wide range of applications in the area of design, construction and operation of products, systems and services, including lifecycle development and human–technology interaction. The book describes advanced methodologies and tools for evaluating and improving interface usability, new models, and case studies and best practices in virtual, augmented and mixed reality systems, with a special focus on dynamic environments. It also discusses various factors concerning the human user, hardware, and artificial intelligence software. Based on the proceedings of the 2nd International Conference on Intelligent Human Systems Integration (IHSI 2019), held on February 7–10, 2019, in San Diego, California, USA, the book also examines the forces that are currently shaping the nature of computing and cognitive systems, such as the need to reduce hardware costs; the importance of infusing intelligence and automation; the trend toward hardware miniaturization and power reduction; the need for a better assimilation of computation in the environment; and social concerns regarding access to computers and systems for people with special needs. It offers a timely survey and a practice-oriented reference guide for policy- and decision-makers, human factors engineers, systems developers and users alike.
Download or read book Material Integrated Intelligent Systems written by Stefan Bosse and published by John Wiley & Sons. This book was released on 2018-03-12 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining different perspectives from materials science, engineering, and computer science, this reference provides a unified view of the various aspects necessary for the successful realization of intelligent systems. The editors and authors are from academia and research institutions with close ties to industry, and are thus able to offer first-hand information here. They adopt a unique, three-tiered approach such that readers can gain basic, intermediate, and advanced topical knowledge. The technology section of the book is divided into chapters covering the basics of sensor integration in materials, the challenges associated with this approach, data processing, evaluation, and validation, as well as methods for achieving an autonomous energy supply. The applications part then goes on to showcase typical scenarios where material-integrated intelligent systems are already in use, such as for structural health monitoring and smart textiles.
Download or read book Languages Design Methods and Tools for Electronic System Design written by Daniel Große and published by Springer. This book was released on 2018-12-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a selection of the best papers from the twentiethedition of the Forum on specification and Design Languages Conference (FDL), which took place on September 18-20, 2017, in Verona, Italy. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers modeling and verification methodologies targeting digital and analog systems; Addresses firmware development and validation; Targets both functional and non-functional properties; Includes descriptions of methods for reliable system design.
Download or read book Computational Intelligence for Sustainable Transportation and Mobility written by Deepak Gupta and published by Bentham Science Publishers. This book was released on 2021-12-16 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies and computing methodologies are now used to address the existing issues of urban traffic systems. The development of computational intelligence methods such as machine learning and deep learning, enables engineers to find innovative solutions to guide traffic in order to reduce transportation and mobility problems in urban areas. This volume, Computational Intelligence for Sustainable Transportation and Mobility, presents several computing models for intelligent transportation systems, which may hold the key to achieving sustainable development goals by optimizing traffic flow and minimizing associated risks. The book begins with the basic computational Intelligence techniques for traffic systems and explains its applications in vehicular traffic prediction, model optimization, behavior analysis, traffic density estimation, and more. The main objectives of this book are to present novel techniques developed, new technologies and computational intelligence for sustainable mobility and transportation solutions, as well as giving an understanding of some Industry 4.0 trends. Readers will learn how to apply computational intelligence techniques such as multiagent systems (MAS), whale optimization, artificial Intelligence (AI), deep neural networks (DNNs) so that they can to develop algorithms, models, and approaches for sustainable transportation operations. Key Features: - Provides an overview of machine learning models and their optimization for intelligent transportation systems in urban areas - Covers classification of traffic behavior - Demonstrates the application of artificial immune system algorithms for traffic prediction - Covers traffic density estimation using deep learning models - Covers Fog and edge computing for intelligent transportation systems - Gives an IoT and Industry 4.0 perspective about intelligent transportation systems to readers - Presents a current perspective on an urban hyperloop system for India
Download or read book Sensor Systems Simulations written by Willem Dirk van Driel and published by Springer. This book was released on 2019-06-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for readers various technical outcomes from the EU-project IoSense. The authors discuss sensor integration, including LEDs, dust sensors, LIDAR for automotive driving and 8 more, demonstrating their use in simulations for the design and fabrication of sensor systems. Readers will benefit from the coverage of topics such as sensor technologies for both discrete and integrated innovative sensor devices, suitable for high volume production, electrical, mechanical, security and software resources for integration of sensor system components into IoT systems and IoT-enabling systems, and IoT sensor system reliability. Describes from component to system level simulation, how to use the available simulation techniques for reaching a proper design with good performance; Explains how to use simulation techniques such as Finite Elements, Multi-body, Dynamic, stochastics and many more in the virtual design of sensor systems; Demonstrates the integration of several sensor solutions (thermal, dust, occupancy, distance, awareness and more) into large-scale system solutions in several industrial domains (Lighting, automotive, transport and more); Includes state-of-the-art simulation techniques, both multi-scale and multi-physics, for use in the electronic industry.
Download or read book Intelligent Human Systems Integration written by Waldemar Karwowski and published by Springer. This book was released on 2017-12-30 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on research on innovative human systems integration and human-machine interaction, with an emphasis on artificial intelligence and automation, as well as computational modeling and simulation. It covers a wide range of applications in the area of design, construction and operation of products, systems and services, including lifecycle development and human-technology interaction. The book describes advanced methodologies and tools for evaluating and improving interface usability, new models, as well as case studies and best practices in virtual, augmented and mixed reality systems, with a special focus on dynamic environments. It also discusses different factors concerning the human, hardware, and artificial intelligence software. Based on the proceedings of the 1st International Conference on Intelligent Human Systems Integration (IHSI 2018), held on January 7-9, 2018, in Dubai, United Arab Emirates, the book also examines the forces that are currently shaping the nature of computing and cognitive systems, such as the need for decreasing hardware costs; the importance of infusing intelligence and automation, and the related trend toward hardware miniaturization and power reduction; the necessity for a better assimilation of computation in the environment; and the social concerns regarding access to computers and systems for people with special needs. It offers a timely survey and a practice-oriented reference guide to policy- and decision-makers, human factors engineers, systems developers and users alike.
Download or read book Multifunctional Lightweight Structures written by Lothar Kroll and published by Springer Nature. This book was released on 2023-03-28 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents key research findings on the combination of different technologies that promise to be particularly sustainable and broadly impactful in their application. The findings were compiled during the course of the first funding period for the MERGE Cluster of Excellence. New methods, potential solutions, and exemplary pilot applications take center stage as the text explores the next generation of functional integration via lightweight structures. The underlying manufacturing processes are based on textile, polymer, and metal processing techniques, all of which are suitable for large batch production, flexibility, and reproducibility.
Download or read book Intelligent Human Systems Integration 2020 written by Tareq Ahram and published by Springer Nature. This book was released on 2020-01-22 with total page 1295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research on innovative human systems integration and human–machine interaction, with an emphasis on artificial intelligence and automation, as well as computational modeling and simulation. It covers a wide range of applications in the areas of design, construction and operation of products, systems and services, and discusses the human factors in a wide range of settings. Gathering the proceedings of the 3rd International Conference on Intelligent Human Systems Integration (IHSI 2020), held on February 19–21, 2020, in Modena, Italy, the book’s goal is to advance the theory and applications of artificial cognitive systems and improve human-artificial systems collaboration. Special emphasis is placed on automotive design, autonomous vehicles and the applications of artificial intelligence. The book offers a timely survey and source of inspiration for human factors engineers, automotive engineers, IT developers and UX designers who are working to shape the future of automated intelligent systems.
Download or read book Methods and Applications for Modeling and Simulation of Complex Systems written by Liang Li and published by Springer. This book was released on 2018-10-17 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the proceedings of the 18th Asia Simulation Conference, AsiaSim 2018, held in Kyoto, Japan, in August 2018. The 45 revised full papers presented in this volume were carefully reviewed and selected from 90 submissions. The papers are organized in topical sections on modeling and simulation technology; soft computing and machine learning; high performance computing and cloud computing; simulation technology for industry; simulation technology for intelligent society; simulation of instrumentation and control application; computational mathematics and computational science; flow simulation; visualization and computer vision to support simulation.
Download or read book Advances in Smart Vehicular Technology Transportation Communication and Applications written by Yong Zhao and published by Springer. This book was released on 2018-11-30 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights papers presented at the Second International Conference on Smart Vehicular Technology, Transportation, Communication and Applications (VTCA 2018), which was held at Mount Emei, Sichuan Province, China from 25 to 28 October 2018. The conference was co-sponsored by Springer, Southwest Jiaotong University, Fujian University of Technology, Chang’an University, Shandong University of Science and Technology, Fujian Provincial Key Lab of Big Data Mining and Applications, and the National Demonstration Center for Experimental Electronic Information and Electrical Technology Education (Fujian University of Technology). The conference was intended as an international forum for researchers and professionals engaged in all areas of smart vehicular technology, vehicular transportation, vehicular communication, and applications.
