Download or read book Smart Cement written by Cumaraswamy Vipulanandan and published by CRC Press. This book was released on 2021-07-29 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over three billion metric tons of cement are produced annually worldwide, making concrete the most extensively used construction material. Self-sensing, or smart, cement allows real-time monitoring of performance through the entire service life of a concrete structure, for the detection of changing stresses, contamination, excessive temperature, gas leaks and pre-seismic activity. This is achieved by adding a very small proportion of conductive or semi-conductive fibers, such as carbon fibers to the bulk cement, making it piezoresistive, and enabling changes in the concrete’s electrical resistivity in response to shear stress and strain to be monitored. This state-of-the-art reference work presents experimental results with a realistic theoretical framework, for cement manufactures, concrete technologists and contractors as well as researchers.
Download or read book Smart Nanoconcretes and Cement Based Materials written by Mohd Shahir Liew and published by Elsevier. This book was released on 2019-11-16 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Nanoconcretes and Cement-Based Materials: Properties, Modelling and Applications explores the fundamental concepts and applications of smart nanoconcretes with self-healing, self-cleaning, photocatalytic, antibacterial, piezoelectrical, heating and conducting properties and how they are used in modern high-rise buildings, hydraulic engineering, highways, tunnels and bridges. This book is an important reference source for materials scientists and civil engineers who are looking to enhance the properties of smart nanomaterials to create stronger, more durable concrete. Explores the mechanisms through which active agents are released from nanocontainers inside concrete Shows how embedded smart nanosensors, including carbon cement-based smart sensors and micro/nano strain-sensors, are used to increase concrete performance Discusses the major challenges of integrating smart nanomaterials into concrete composites
Download or read book Nanotechnology for Smart Concrete written by Ghasan Fahim Huseien and published by CRC Press. This book was released on 2022-02-11 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials can markedly improve the mechanical properties of concrete, as well as reduce the porosity and enhance the durability of concrete. The application of nanotechnology in concrete is still in its infancy. However, an ever-growing demand for ultra-high-performance concrete and recurring environmental pollution caused by ordinary Portland cement has encouraged engineers to exploit nanotechnology in the construction industry. Nanotechnology for Smart Concrete discusses the advantages and applications of nanomaterials in the concrete industry, including high-strength performance, microstructural improvement, self-healing, energy storage, and coatings. The book Analyses the linkage of concrete materials with nanomaterials and nanostructures Discusses the applications of nanomaterials in the concrete industry, including energy storage in green buildings, anti-corrosive coatings, and inhibiting pathogens and viruses Covers self-healing concrete Explores safety considerations, sustainability, and environmental impact of nanoconcrete Includes an appendix of solved questions This comprehensive and innovative text serves as a useful reference for upper-level undergraduate students, graduate students, and professionals in the fields of Civil and Construction Engineering, Materials Science and Engineering, and Nanomaterials. Dr. Ghasan Fahim Huseien is a research fellow at the Department of Building, School of Design and Environment, National University of Singapore, Singapore. He received his PhD degree from the University of Technology Malaysia in 2017. Dr. Huseien has over 5 years of Applied R&D and 10 years of experience in manufacturing smart materials for sustainable building and smart cities. He has expertise in Advanced Sustainable Construction Materials covering Civil Engineering, Environmental Sciences and Engineering. He has authored and co-authored 50+ publications and technical reports, 3 books, and 15 book chapters, and participated in 25 national and international conferences/workshops. He is a peer reviewer for several international journals as well as Master’s and PhD students. He is a member of the Concrete Society of Malaysia and the American Concrete Institute. Dr. Nur Hafizah Abd Khalid is a Senior Lecturer at the School of Civil Engineering, Universiti Teknologi, Malaysia (UTM), and is a research member of the Construction Material Research Group (CMRG). She is currently a Council Member of the Concrete Society Malaysia (CSM). She earned her Master’s degree on structure and materials in 2011 from the Universiti Teknologi Malaysia. She received a Young Women Scientist Award (representing Malaysia) in 2014 in South Korea by KWSE/APNN. She is currently appointed as an Inviting Researcher at Hunan University, China, funded under the Talented Young Scientist Program (TYSP). Her research interests focus on concrete structural systems, advanced concrete technology (green concrete technology and fibre reinforced concrete), civil engineering materials, polymer composites, and bio-composites. Professor Dr. Jahangir Mirza has over 35 years of Applied Research and Development (R&D) as well as teaching experience. He has expertise in Advanced Sustainable Construction Materials covering Civil Engineering, Environmental Sciences and Engineering, Chemistry, Earth Sciences, Geology, and Architecture departments. He has been a Senior Scientist at the Research Institute of Hydro-Quebec (IREQ), Montreal, Canada since 1985. He has been a Visiting Research Professor for the Environmental Engineering program at the University of Guelph in Ontario, Canada since 2018.
Download or read book Nanotechnology for Smart Concrete written by Ghasan Fahim Huseien and published by CRC Press. This book was released on 2022-02-11 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials can markedly improve the mechanical properties of concrete, as well as reduce the porosity and enhance the durability of concrete. The application of nanotechnology in concrete is still in its infancy. However, an ever-growing demand for ultra-high-performance concrete and recurring environmental pollution caused by ordinary Portland cement has encouraged engineers to exploit nanotechnology in the construction industry. Nanotechnology for Smart Concrete discusses the advantages and applications of nanomaterials in the concrete industry, including high-strength performance, microstructural improvement, self-healing, energy storage, and coatings. The book Analyses the linkage of concrete materials with nanomaterials and nanostructures Discusses the applications of nanomaterials in the concrete industry, including energy storage in green buildings, anti-corrosive coatings, and inhibiting pathogens and viruses Covers self-healing concrete Explores safety considerations, sustainability, and environmental impact of nanoconcrete Includes an appendix of solved questions This comprehensive and innovative text serves as a useful reference for upper-level undergraduate students, graduate students, and professionals in the fields of Civil and Construction Engineering, Materials Science and Engineering, and Nanomaterials. Dr. Ghasan Fahim Huseien is a research fellow at the Department of Building, School of Design and Environment, National University of Singapore, Singapore. He received his PhD degree from the University of Technology Malaysia in 2017. Dr. Huseien has over 5 years of Applied R&D and 10 years of experience in manufacturing smart materials for sustainable building and smart cities. He has expertise in Advanced Sustainable Construction Materials covering Civil Engineering, Environmental Sciences and Engineering. He has authored and co-authored 50+ publications and technical reports, 3 books, and 15 book chapters, and participated in 25 national and international conferences/workshops. He is a peer reviewer for several international journals as well as Master’s and PhD students. He is a member of the Concrete Society of Malaysia and the American Concrete Institute. Dr. Nur Hafizah Abd Khalid is a Senior Lecturer at the School of Civil Engineering, Universiti Teknologi, Malaysia (UTM), and is a research member of the Construction Material Research Group (CMRG). She is currently a Council Member of the Concrete Society Malaysia (CSM). She earned her Master’s degree on structure and materials in 2011 from the Universiti Teknologi Malaysia. She received a Young Women Scientist Award (representing Malaysia) in 2014 in South Korea by KWSE/APNN. She is currently appointed as an Inviting Researcher at Hunan University, China, funded under the Talented Young Scientist Program (TYSP). Her research interests focus on concrete structural systems, advanced concrete technology (green concrete technology and fibre reinforced concrete), civil engineering materials, polymer composites, and bio-composites. Professor Dr. Jahangir Mirza has over 35 years of Applied Research and Development (R&D) as well as teaching experience. He has expertise in Advanced Sustainable Construction Materials covering Civil Engineering, Environmental Sciences and Engineering, Chemistry, Earth Sciences, Geology, and Architecture departments. He has been a Senior Scientist at the Research Institute of Hydro-Quebec (IREQ), Montreal, Canada since 1985. He has been a Visiting Research Professor for the Environmental Engineering program at the University of Guelph in Ontario, Canada since 2018.
Download or read book Smart and Multifunctional Concrete Toward Sustainable Infrastructures written by Baoguo Han and published by Springer. This book was released on 2017-06-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research advances and findings in the field of smart/multifunctional concretes, focusing on the principles, design and fabrication, test and characterization, performance and mechanism, and their applications in infrastructures. It also discusses future challenges in the development and application of smart/multifunctional concretes, providing useful theory, ideas and principles, as well as insights and practical guidance for developing sustainable infrastructures. It is a valuable resource for researchers, scientists and engineers in the field of civil-engineering materials and infrastructures.
Download or read book Self Sensing Concrete in Smart Structures written by Baoguo Han and published by Butterworth-Heinemann. This book was released on 2014-07-30 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is the second most used building material in the world after water. The problem is that over time the material becomes weaker. As a response, researchers and designers are developing self-sensing concrete which not only increases longevity but also the strength of the material. Self-Sensing Concrete in Smart Structures provides researchers and designers with a guide to the composition, sensing mechanism, measurement, and sensing properties of self-healing concrete along with their structural applications Provides a systematic discussion of the structure of intrinsic self-sensing concrete Compositions of intrinsic self-sensing concrete and processing of intrinsic self-sensing concrete Explains the sensing mechanism, measurement, and sensing properties of intrinsic self-sensing concrete
Download or read book International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement based Materials and Concrete Structures written by Agnieszka Jędrzejewska and published by Springer Nature. This book was released on 2023-06-08 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest advances, innovations, and applications in cement-based materials (CBM) and concrete structures, as presented by leading international researchers and engineers at the International RILEM Conference on synergizing expertise toward sustainability and robustness of CBM and concrete structures (SynerCrete), held in Milos Island, Greece, on June 14-16, 2023. The aim of the conference was to discuss and arouse progress in research, development, and application of CBM and structural concrete through combination of expertise from distinct fields of knowledge, such as performance-based design, 3D modeling for analysis/design, building information modeling, and even robotics, while keeping focus on multiscale approaches at time and spatial levels. It covers a diverse range of topics concerning alternative concrete formulations for adaptation to climate change, performance-based and multiphysics/multiscale design and innovative testing, structural health monitoring and maintenance management, integral BIM-based planning, and resource-responsible building. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations. The two volumes encompass more than 200 original contributions in the field.
Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.
Download or read book Nanotechnology in Cement Based Construction written by Antonella D'Alessandro and published by CRC Press. This book was released on 2020-01-22 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many books on new smart materials are available, but specialized analysis of particular topics is still in high demand. This multiauthor book focuses on applying nanotechnology to cement-based materials to make numerous engineering applications possible. The addition of novel smart nanofillers allows the development of multifunctional composite materials, not just limited to improving mechanical strength, but also including several enhanced features. Special attention is devoted to types of nano-inclusions, novel techniques to mix components, and analysis of properties that can be achieved by paste, mortar, or concrete if added with nanofillers. Among these properties, the capability of self-sensing is very promising. Moreover, the use of phase-changing materials improves the energy efficiency of nanocomposites, resulting in important applications in engineering. Particular attention is also focused on energy harvesting and electromagnetic shielding properties. Comprehensive and up to date, this is an important reference book that not only provides in-depth information about recent developments and perspectives in this field but also discusses topics that promise major developments in the near future.
Download or read book Self Healing Phenomena in Cement Based Materials written by Mario de Rooij and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-healing materials are man-made materials which have the built-in capability to repair damage. Failure in materials is often caused by the occurrence of small microcracks throughout the material. In self-healing materials phenomena are triggered to counteract these microcracks. These processes are ideally triggered by the occurrence of damage itself. Thus far, the self-healing capacity of cement-based materials has been considered as something "extra". This could be called passive self-healing, since it was not a designed feature of the material, but an inherent property of it. Centuries-old buildings have been said to have survived these centuries because of the inherent self-healing capacity of the binders used for cementing building blocks together. In this State-of-the-Art Report a closer look is taken at self-healing phenomena in cement-based materials. It is shown what options are available to design for this effect rather than have it occur as a "coincidental extra".
Download or read book PRO 32 International Conference on Advances in Concrete and Structures ICACS 2003 Volume 2 written by Ying-shu Yuan and published by RILEM Publications. This book was released on 2003 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of Italian Concrete Days 2018 written by Marco di Prisco and published by Springer Nature. This book was released on 2019-09-04 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the best peer-reviewed papers presented at the Italian Concrete Days national conference, held in Lecco, Italy, on June 14-15, 2018. The conference topics encompass the aspects of design, execution, rehabilitation and control of concrete structures, with particular reference to theory and modeling, applications and realizations, materials and investigations, technology and construction techniques. The contributions amply demonstrate that today’s structural concrete applications concern not only new constructions, but more and more rehabilitation, conservation, strengthening and seismic upgrading of existing premises, and that requirements cover new aspects within the frame of sustainability, including environmental friendliness, durability, adaptability and reuse of works and / or materials. As such the book represents an invaluable, up-to-the-minute tool, providing an essential overview of structural concrete, as well as all new materials with cementitious matrices.
Download or read book Echinoderms Munchen written by Thomas Heinzeller and published by CRC Press. This book was released on 2005-12-08 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1972, scientists from all over the world working on fundamental questions of echinoderm biology and palaeontology have conferred every three years to exchange current views and results. The 11th International Echinoderm Conference held at the University of Munich, Germany, from 6-10 October 2003,continued this tradition. This volume comprises 95 submitted papers and 96 abstracts covering a wide spectrum from innovative student contributions to the lessons learnt from experienced specialists. The content of the contributions ranges from original research results to the latest synopses concerning a variety of topics, including visual sensing, larval cloning, mutable collagenous tissues, sea urchin aqua-culture, deuterostome phylogeny, palaeobiology and taphonomy.
Download or read book Advances in Sustainable Construction Materials written by Sabyasachi Biswas and published by Springer Nature. This book was released on 2021-04-10 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of National Conference on Advances in Sustainable Construction Materials (ASCM 2020) and examines a range of durable, energy-efficient, and next-generation construction materials produced from industrial wastes and by-products. The topics covered include sustainable materials and construction, innovations in recycling concrete, green buildings and innovative structures, utilization of waste materials in construction, geopolymer concrete, self-compacting concrete by using industrial waste materials, nanotechnology and sustainability of concrete, environmental sustainability and development, recycling solid wastes as road construction materials, emerging sustainable practices in highway pavements construction, plastic roads, pavement analysis and design, application of geosynthetics for ground improvement, sustainability in offshore geotechnics, green tunnel construction technology and application, ground improvement techniques and municipal solid waste landfill. Given the scope of contents, the book will be useful for researchers and professionals working in the field of civil engineering and especially sustainable structures and green buildings.
Download or read book New Generation Cement Based Nanocomposites written by Siqi Ding and published by Springer Nature. This book was released on 2023-05-18 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is civil engineering material and nanotechnology. Recent advances in nano-synthetic technologies and nanocomposite technologies as well as nano-surface modification technologies are driving the progressive exploitation of advanced nanomaterials. In view of their unique structures and mutual synergy, these advanced nanomaterials are expected to alleviate the dispersion issue of traditional nanomaterials in cement-based composites, improve their nanocomposite effectiveness and efficiency as well as impart new properties and functionalities to cement-based composites, thus boosting the development of new-generation cement-based nanocomposites. Based on the authors’ latest research accumulations and achievements, this book presents the fundamentals, fabrications, characterizations, performances and applications of the new-generation cement-based nanocomposites. It features numerous illustrations and data graphs as well as summary tables to visually describe the topics. This book is dedicated to students, researchers, scientists and engineers in the field of civil engineering materials and nanotechnology. The readers can find information on progress of civil engineering materials and nanotechnologies, cutting-edge research ideas and findings and practical guidance for developing sustainable and multifunctional cement-based nanocomposites.
Download or read book Advances in Concrete and Structures written by Jing Si Huo and published by Trans Tech Publications Ltd. This book was released on 2008-10-21 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Concrete is, both practically and metaphorically, one of the major civil-engineering materials supporting modern society. But both concrete technology, and its structures, face daunting challenges arising from environmental erosion and other natural, and man-made, hazards.
Download or read book Integrative Oncology written by Matthew P. Mumber and published by CRC Press. This book was released on 2005-10-26 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrative Oncology explores a comprehensive, evidence-based approach to cancer care that addresses all individuals involved in the process, and can include the use of complementary and alternative medicine (CAM) therapies alongside conventional modalities such as chemotherapy, surgery, and radiation therapy. The number of integrative care programs is increasing worldwide and this book forms a foundation text for all who want to learn more about this growing field. This guide provides a thoughtful and generous perspective on integrative care, an outstanding overview of the exciting clinical opportunities these techniques can offer, and a guide to the new territories that all oncologists and CAM practitioners need to explore and understand.
