Download or read book Smart Actuation and Sensing Systems written by Eden Slaver and published by . This book was released on 2016-09-15 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of integrated circuits, which became possible because of the tremendous progress in semiconductor technology, resulted in the low cost microprocessor. Thus if it is possible to design a low cost sensor which is silicon based then the overall cost of the control system can be reduced. We can have integrated sensors which has electronics and the transduction element together on one silicon chip. This complete system can be called as system-on-chip .The main aim of integrating the electronics and the sensor is to make an intelligent sensor, which can be called as smart sensor. Smart sensors then have the ability to make some decision. Physically a smart sensor consists of transduction element, signal conditioning electronic and controller/processor that support some intelligence in a single package. A smart sensor is a device that takes input from the physical environment and uses built-in compute resources to perform predefined functions upon detection of specific input and then process data before passing it on. Smart sensors enable more accurate and automated collection of environmental data with less erroneous noise amongst the accurately recorded information. These devices are used for monitoring and control mechanisms in a wide variety of environments including smart grids, battlefield reconnaissance, exploration and a great number of science applications. A smart actuator is the integrated actuator of all components such as motor, controller, sensors, and communication unit. The robot which is linked to a smart actuator can be assembled or disassembled and reconfigured. Therefore, there are increasing demands from industries for a smart sensor and actuator. Smart Actuation and Sensing Systems - Recent Advances and Future Challenges emphasizes on accomplishments in the area of Smart Actuators and Smart Sensors, to combine researchers and scientists from different fields into a single virtual room. The book hence reflects the multicultural nature of the field and will allow the reader to taste and appreciate different points of view, different engineering methods and different tools that must be jointly considered when designing and realizing smart actuation and sensing systems.

Download or read book Smart Actuators and Smart Sensors written by Bob Tucker and published by . This book was released on 2015-02-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises recent researches and advances in the field of smart actuators and sensors. The objective of this book is to sum up all the technical researches regarding smart actuators and sensors. Researches accomplished by experts around the globe are included in this book. The book will allow the reader to appreciate diverse points of view, engineering techniques and tools that must be considered together when designing and realizing smart actuation and sensing systems. It discusses important topics regarding smart fluids, smart transducer applications and piezo-based systems.

Download or read book Understanding Smart Sensors written by Randy Frank and published by Artech House. This book was released on 2013 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, Understanding Smart Sensors is the most complete, up-to-date, and authoritative summary of the latest applications and developments impacting smart sensors in a single volume. This thoroughly expanded and revised edition of an Artech bestseller contains a wealth of new material, including critical coverage of sensor fusion and energy harvesting, the latest details on wireless technology, the role and challenges involved with sensor apps and cloud sensing, greater emphasis on applications throughout the book, and dozens of figures and examples of current technologies from over 50 companies. This edition provides you with knowledge regarding a broad spectrum of possibilities for technology advancements based on current industry, university and national laboratories R & D efforts in smart sensors. Updated material also identifies the need for trusted sensing, the efforts of many organizations that impact smart sensing, and more. Utilizing the latest in smart sensor, microelectromechanical systems (MEMS) and microelectronic research and development, you get the technical and practical information you need keep your designs and products on the cutting edge. Plus, you see how network (wired and wireless) connectivity continues to impact smart sensor development. By combining information on micromachining and microelectronics, this is the first book that links these two important aspects of smart sensor technology so you don't have to keep multiple references on hand. This comprehensive resource also includes an extensive list of smart sensor acronyms and a glossary of key terms. With an effective blend of historical information and the latest content, the third edition of Understanding Smart Sensors provides a unique combination of foundational and future-changing information.

Download or read book Handbook of Smart Actuators and Smart Sensors written by Bob Tucker and published by . This book was released on 2015-02-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart actuators and sensors are used in diverse electric applications. This book is a comprehensive summary of recent technical researches in the field of smart actuators and sensors. It is a compilation of researches accomplished by experts from around the globe. The book will allow the reader to appreciate diverse points of view, engineering techniques and tools that must be considered together when designing and realizing smart actuation and sensing systems. It covers significant issues regarding SMA-based systems and smart polymers.

Download or read book Smart Actuation and Sensing Systems Recent Advances and Future Challenges written by Gabriele Vassura and published by . This book was released on 2012 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the present book, which tries to summarize in an edited format and in a fairly comprehensive manner, many of the recent technical research accomplishments in the area of Smart Actuators and Smart Sensors, is to combine researchers and scientists from different fields into a single virtual room. The book hence reflects the multicultural nature of the field and will allow the reader to taste and appreciate different points of view, different engineering methods and different tools that must be jointly considered when designing and realizing smart actuation and sensing systems.

Download or read book Sensors and Actuators in Smart Cities written by Mohammad Hammoudeh and published by MDPI. This book was released on 2018-05-04 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Sensors and Actuators in Smart Cities" that was published in JSAN

Download or read book Smart Sensors and MEMS written by S Nihtianov and published by Woodhead Publishing. This book was released on 2018-03-09 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Sensors and MEMS: Intelligent Devices and Microsystems for Industrial Applications, Second Edition highlights new, important developments in the field, including the latest on magnetic sensors, temperature sensors and microreaction chambers. The book outlines the industrial applications for smart sensors, covering direct interface circuits for sensors, capacitive sensors for displacement measurement in the sub-nanometer range, integrated inductive displacement sensors for harsh industrial environments, advanced silicon radiation detectors in the vacuum ultraviolet (VUV) and extreme ultraviolet (EUV) spectral range, among other topics. New sections include discussions on magnetic and temperature sensors and the industrial applications of smart micro-electro-mechanical systems (MEMS). The book is an invaluable reference for academics, materials scientists and electrical engineers working in the microelectronics, sensors and micromechanics industry. In addition, engineers looking for industrial sensing, monitoring and automation solutions will find this a comprehensive source of information. Contains new chapters that address key applications, such as magnetic sensors, microreaction chambers and temperature sensors Provides an in-depth information on a wide array of industrial applications for smart sensors and smart MEMS Presents the only book to discuss both smart sensors and MEMS for industrial applications

Download or read book Smart Sensor Systems written by Gerard Meijer and published by John Wiley & Sons. This book was released on 2014-04-02 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from an internationally-renowned group of experts, this book uses a multidisciplinary approach to review recent developments in the field of smart sensor systems, covering important system and design aspects. It examines topics over the whole range of sensor technology from the theory and constraints of basic elements, physics and electronics, up to the level of application-orientated issues. Developed as a complementary volume to ‘Smart Sensor Systems’ (Wiley 2008), which introduces the basics of smart sensor systems, this volume focuses on emerging sensing technologies and applications, including: State-of-the-art techniques for designing smart sensors and smart sensor systems, including measurement techniques at system level, such as dynamic error correction, calibration, self-calibration and trimming. Circuit design for sensor systems, such as the design of precision instrumentation amplifiers. Impedance sensors, and the associated measurement techniques and electronics, that measure electrical characteristics to derive physical and biomedical parameters, such as blood viscosity or growth of micro-organisms. Complete sensor systems-on-a-chip, such as CMOS optical imagers and microarrays for DNA detection, and the associated circuit and micro-fabrication techniques. Vibratory gyroscopes and the associated electronics, employing mechanical and electrical signal amplification to enable low-power angular-rate sensing. Implantable smart sensors for neural interfacing in bio-medical applications. Smart combinations of energy harvesters and energy-storage devices for autonomous wireless sensors. Smart Sensor Systems: Emerging Technologies and Applications will greatly benefit final-year undergraduate and postgraduate students in the areas of electrical, mechanical and chemical engineering, and physics. Professional engineers and researchers in the microelectronics industry, including microsystem developers, will also find this a thorough and useful volume.

Download or read book Ferroic Materials for Smart Systems written by Jiyan Dai and published by John Wiley & Sons. This book was released on 2020-04-27 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art knowledge?from basic insights to applications?on ferroic materials-based devices This book covers the fundamental physics, fabrication methods, and applications of ferroic materials and covers bulk, thin films, and nanomaterials. It provides a thorough overview of smart materials and systems involving the interplays among the mechanical strain, electrical polarization, magnetization, as well as heat and light. Materials presented include ferroelectric, multiferroic, piezoelectric, electrostrictive, magnetostrictive, and shape memory materials as well as their composites. The book also introduces various sensor and transducer applications, such as ultrasonic transducers, surface acoustic wave devices, microwave devices, magneto-electric devices, infrared detectors and memories. Ferroic Materials for Smart Systems: Fabrication, Devices and Applications introduces advanced measurement and testing techniques in ferroelectrics, including FeRAM and ferroelectric tunnelling based resistive switching. It also looks at ferroelectricity in emerging materials, such as 2D materials and high-k gate dielectric material HfO2. Engineering considerations for device design and fabrication are examined, as well as applications for magnetostrictive devices. Multiferroics of materials possessing both ferromagnetic and ferroelectric orders is covered, along with ferroelastic materials represented by shape memory alloy and magnetic shape memory alloys. -Brings together physics, fabrication, and applications of ferroic materials in a coherent manner -Discusses recent advances in ferroic materials technology and applications -Covers dielectric, ferroelectric, pyroelectric and piezoelectric materials -Introduces electrostrictive materials and magnetostrictive materials -Examines shape memory alloys and magneto-shape-memory alloys -Introduces devices based on the integration of ferroelectric and ferromagnetic materials such as multiferroic memory device and ME coupling device for sensor applications Ferroic Materials for Smart Systems: Fabrication, Devices and Applications will appeal to a wide variety of researchers and developers in physics, materials science and engineering.

Download or read book Smart Sensors and MEMS written by Sergey Y. Yurish and published by Springer Science & Business Media. This book was released on 2007-11-12 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Smart Sensors and MEMS provides an unique collection of contributions on latest achievements in sensors area and technologies that have made by eleven internationally recognized leading experts from Czech Republic, Germany, Italy, Israel, Portugal, Switzerland, Ukraine and USA during the NATO Advanced Study Institute (ASI) in Povoa de Varzim, Portugal, from 8 to 19 September 2003. The aims of this volume are to disseminate wider and in-depth theoretical and practical knowledge about smart sensors and its applications, to create a clear consciousness about the effectiveness of MEMS technologies, advanced signal processing and conversion methods, to stimulate the theoretical and applied research in these areas, and promote the practical using of these techniques in the industry. With that in mind, a broad range of physical, chemical and biosensors design principles, technologies and applications were included in the book. It is a first attempt to describe in the same book different physical, chemical, biological sensors and MEMS technologies suitable for smart sensors creation. The book presents the state-of-the-art and gives an excellent opportunity to provide a systematic, in-depth treatment of the new and rapidly developing field of smart sensors and MEMS. The volume is an excellent guide for practicing engineers, researchers and students interested in this crucial aspect of actual smart sensor design.

Download or read book Smart Sensors Actuators and MEMS V written by Ulrich Schmid and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrated Smart Sensors written by Gert van der Horn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 1. 1 Introduction The (signal processing and storage) capacity ofthe human brain enables us to become powerful autonomous beings, but only if our brains operate in conjunction with (at least some of) our senses and muscles. Using these organs, we can interact with our environment, learn to adapt, and improve important aspects of our life. Similarly, the signal processing capabilities of modern electronics (computers) could be combined with electronic sensors and actuators to enable interaction with, and adaptation to, the (non-electrical) environment. This willlead to smarter and more powerful automated tools and machines. To facilitate and stimulate such a development, easy-to-use low-cost sensors are needed. The combination of electronic interface functions and a sensor in an integrated smart sensor, that provides a standard, digital, and bus-compatible output, would simplify the connection of sensors to standard electronic signal processors (microcontrollers, computers, etc. ). Currently, the calibration procedure, required for standardization of the sensor output signal level, contributes largely to the production costs of accurate sensors. To enable automation of the calibration procedure, and hence reduce the sensor fabrication costs, a digital calibrationjunction should be included in the smart sensor. INTEGRATED SMART SENSORS: Design and Calibration Introduction 1. 2 Sensors and actuators In industry many processes are electronically controlled. As depicted in Fig.

Download or read book Smart Actuator and Sensor Technologies written by Kam K Leang and published by Butterworth-Heinemann. This book was released on 2029-11-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Actuator and Sensor Technologies: Design, Modeling, Fabrication, and Control for Mechatronic Systems focuses on design, modeling, fabrication, and control of smart actuator technologies, such as piezoelectric actuators, electroactive polymer actuators, and a host of other "smart” material based actuators, including shape memory alloys, magnetostrictive materials and others. This book covers important technical aspects so that engineers, scientists, and designers can utilize the information in their work. As emerging mechatronic systems, such as precision positioning system, soft robots, biomedical devices and aerospace system are exploring the use of smart actuators, this book provides complete coverage of the popular technologies. Covers the important technical aspects of design, modeling, fabrication and control of smart actuator technologies Written by two experts in the field of smart actuators, each contributing their expert knowledge“/li> Presents a reference text where readers can enhance their understanding through further reading of listed, credible publications

Download or read book Smart Sensors Actuators and MEMS IV written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Materials Actuators written by Seung-Bok Choi and published by . This book was released on 2015 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last two decades, a great effort has been directed towards the development of new smart materials actuators and their corresponding application devices and systems. Currently, some smart materials actuators are commercially applied for several technologies including automotive technology, but some of the smart materials actuators are still far from meeting strict practical requirements such as reliability, cost-effectiveness and robustness against unexpected environment conditions. Therefore, it is timely and appropriate to present recent research on smart materials actuators in terms of material characterization and advanced application systems in a single book. This book describes smart materials actuator technology from materials characterizations to device or system applications. The smart materials introduced in this book include magnetorehological fluid (MRF), magnetorheological elastomer (MRE), electrorheological fluid (ERF), piezoelectric material (PM), shape memory ally (SMA), dielectric elastomer (DE) and ionic polymer (IP). Both physical and chemical characterizations of each smart material are described in details in terms of actuating aspect. In addition, several application devices utilizing each smart material are introduced to provide practical controllability as a potential candidate for new actuators. The application devices introduced in this book include MRF damper for automotive suspension, PM unimorph pump for micro-hydraulic system, MRE flexible structure for vibration control, IP biomimetic micro-robot and SMA civil structure and damper system for vibration attenuation.

Download or read book Smart Sensors and Systems written by Chong-Min Kyung and published by Springer. This book was released on 2016-10-16 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the technology used for effective sensing of our physical world and intelligent processing techniques for sensed information, which are essential to the success of Internet of Things (IoT). The authors provide a multidisciplinary view of sensor technology from materials, process, circuits, and big data domains and showcase smart sensor systems in real applications including smart home, transportation, medical, environmental, agricultural, etc. Unlike earlier books on sensors, this book provides a “global” view on smart sensors covering abstraction levels from device, circuit, systems, and algorithms.

Download or read book Smart Sensors at the IoT Frontier written by Hiroto Yasuura and published by Springer. This book was released on 2017-05-29 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes technology used for effective sensing of our physical world and intelligent processing techniques for sensed information, which are essential to the success of Internet of Things (IoT). The authors provide a multidisciplinary view of sensor technology from materials, process, circuits, to big data domains and they showcase smart sensor systems in real applications including smart home, transportation, medical, environmental, agricultural, etc. Unlike earlier books on sensors, this book provides a “global” view on smart sensors covering abstraction levels from device, circuit, systems, and algorithms.